Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #25: Mon May 17 20:37:32 EDT 2010
    kaduk@hysteresis.mit.edu:/usr/obj/usr/src/sys/GENERIC amd64
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff810fd000.
Preloaded elf obj module "/boot/kernel/if_iwn.ko" at 0xffffffff810fd360.
Preloaded elf obj module "/boot/kernel/iwn5000fw.ko" at 0xffffffff810fd8c8.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2527014174 Hz
CPU: Intel(R) Core(TM)2 Duo CPU     T9400  @ 2.53GHz (2527.01-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x10676  Family = 6  Model = 17  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x000000000112b000 - 0x0000000078beefff, 2007777280 bytes (490180 pages)
0x000000007c6a7000 - 0x000000007c7b6fff, 1114112 bytes (272 pages)
0x000000007c80f000 - 0x000000007c8b6fff, 688128 bytes (168 pages)
avail memory = 1996881920 (1904 MB)
ACPI APIC Table: <LENOVO TP-7U   >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
x86bios:   IVT 0x000000-0x0004ff at 0xffffff0000000000
x86bios:  SSEG 0x010000-0x01ffff at 0xffffff800000d000
x86bios:  EBDA 0x09e000-0x09ffff at 0xffffff000009e000
x86bios:   ROM 0x0a0000-0x0effff at 0xffffff00000a0000
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf6550 00024 (v2 LENOVO)
ACPI: XSDT 0x7cb6a4de 00094 (v1 LENOVO TP-7U    00001130  LTP 00000000)
ACPI: FACP 0x7cb6a600 000F4 (v3 LENOVO TP-7U    00001130 LNVO 00000001)
ACPI: DSDT 0x7cb6a9db 0F190 (v1 LENOVO TP-7U    00001130 MSFT 03000000)
ACPI: FACS 0x7cb8e000 00040
ACPI: SSDT 0x7cb6a7b4 00227 (v1 LENOVO TP-7U    00001130 MSFT 03000000)
ACPI: ECDT 0x7cb79b6b 00052 (v1 LENOVO TP-7U    00001130 LNVO 00000001)
ACPI: APIC 0x7cb79bbd 00078 (v1 LENOVO TP-7U    00001130 LNVO 00000001)
ACPI: MCFG 0x7cb79c35 0003C (v1 LENOVO TP-7U    00001130 LNVO 00000001)
ACPI: HPET 0x7cb79c71 00038 (v1 LENOVO TP-7U    00001130 LNVO 00000001)
ACPI: SLIC 0x7cb79dc2 00176 (v1 LENOVO TP-7U    00001130  LTP 00000000)
ACPI: BOOT 0x7cb79f38 00028 (v1 LENOVO TP-7U    00001130  LTP 00000001)
ACPI: ASF! 0x7cb79f60 000A0 (v16 LENOVO TP-7U    00001130 PTL  00000001)
ACPI: SSDT 0x7cb8d213 0054F (v1 LENOVO TP-7U    00001130 INTL 20050513)
ACPI: TCPA 0x7c907000 00032 (v0                 00000000      00000000)
ACPI: SSDT 0x7c8d4000 00655 (v1  PmRef    CpuPm 00003000 INTL 20050624)
ACPI: SSDT 0x7c8d3000 00274 (v1  PmRef  Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 0x7c8d2000 00242 (v1  PmRef    ApTst 00003000 INTL 20050624)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
firmware: 'iwn5000fw' version 0: 353240 bytes loaded at 0xffffffff810a40b0
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <LENOVO TP-7U> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
CPU0: local APIC error 0x40
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0
AcpiOsDerivePciId: \\_SB_.PCI0.MHCS -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.EHC0.U7CS -> bus 0 dev 29 func 7
AcpiOsDerivePciId: \\_SB_.PCI0.EHC1.U8CS -> bus 0 dev 26 func 7
acpi0: Power Button (fixed)
AcpiOsDerivePciId: \\_SB_.PCI0.LPC_.LPCS -> bus 0 dev 31 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ef00000 (3) failed
ACPI timer: 1/2 1/2 1/1 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT 0x7c8d7c20 002C8 (v1  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 002C8 (v1  PmRef  Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 0x7c8d5020 0087A (v1  PmRef  Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 0087A (v1  PmRef  Cpu0Cst 00003001 INTL 20050624)
cpu1: <ACPI CPU> on acpi0
ACPI: SSDT 0x7c8d6ca0 001CF (v1  PmRef    ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 001CF (v1  PmRef    ApIst 00003000 INTL 20050624)
ACPI: SSDT 0x7c8d6f20 0008D (v1  PmRef    ApCst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0 0008D (v1  PmRef    ApCst 00003000 INTL 20050624)
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
  Validation          0   11   N     0  3 4 5 6 7 9 10 11
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
  Validation          0   11   N     0  3 4 5 6 7 9 10 11
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
  Validation          0   11   N     0  3 4 5 6 7 9 10 11
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
  Validation          0   11   N     0  3 4 5 6 7 9 10 11
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
  Validation          0   11   N     0  3 4 5 6 7 9 10 11
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
  Validation          0   11   N     0  3 4 5 6 7 9 10 11
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
  Validation          0   11   N     0  3 4 5 6 7 9 10 11
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 6 7 9 10 11
  Validation          0   11   N     0  3 4 5 6 7 9 10 11
  After Disable       0  255   N     0  3 4 5 6 7 9 10 11
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 4 hz: 14318180 opts: legacy_route 64-bit
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x2a40, revid=0x07
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2a42, revid=0x07
	domain=0, bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
	map[10]: type Memory, range 64, base 0xf4400000, size 22, enabled
	map[18]: type Prefetchable Memory, range 64, base 0xd0000000, size 28, enabled
	map[20]: type I/O Port, range 32, base 0x1800, size  3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2a43, revid=0x07
	domain=0, bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	map[10]: type Memory, range 64, base 0xf4200000, size 20, enabled
found->	vendor=0x8086, dev=0x2a44, revid=0x07
	domain=0, bus=0, slot=3, func=0
	class=07-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0018, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfc226800, size  4, enabled
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x10f5, revid=0x03
	domain=0, bus=0, slot=25, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 32, base 0xfc000000, size 17, enabled
	map[14]: type Memory, range 32, base 0xfc025000, size 12, enabled
	map[18]: type I/O Port, range 32, base 0x1840, size  5, enabled
pcib0: matched entry for 0.25.INTA
pcib0: slot 25 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2937, revid=0x03
	domain=0, bus=0, slot=26, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0x1860, size  5, enabled
pcib0: matched entry for 0.26.INTA
pcib0: slot 26 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2938, revid=0x03
	domain=0, bus=0, slot=26, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x1880, size  5, enabled
pcib0: matched entry for 0.26.INTB
pcib0: slot 26 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x2939, revid=0x03
	domain=0, bus=0, slot=26, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type I/O Port, range 32, base 0x18a0, size  5, enabled
pcib0: matched entry for 0.26.INTC
pcib0: slot 26 INTC hardwired to IRQ 22
found->	vendor=0x8086, dev=0x293c, revid=0x03
	domain=0, bus=0, slot=26, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfc226c00, size 10, enabled
pcib0: matched entry for 0.26.INTD
pcib0: slot 26 INTD hardwired to IRQ 23
found->	vendor=0x8086, dev=0x293e, revid=0x03
	domain=0, bus=0, slot=27, func=0
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfc020000, size 14, enabled
pcib0: matched entry for 0.27.INTB
pcib0: slot 27 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2940, revid=0x03
	domain=0, bus=0, slot=28, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2942, revid=0x03
	domain=0, bus=0, slot=28, func=1
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTB
pcib0: slot 28 INTB hardwired to IRQ 21
found->	vendor=0x8086, dev=0x2946, revid=0x03
	domain=0, bus=0, slot=28, func=3
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTD
pcib0: slot 28 INTD hardwired to IRQ 23
found->	vendor=0x8086, dev=0x2948, revid=0x03
	domain=0, bus=0, slot=28, func=4
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message
pcib0: matched entry for 0.28.INTA
pcib0: slot 28 INTA hardwired to IRQ 20
found->	vendor=0x8086, dev=0x2934, revid=0x03
	domain=0, bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type I/O Port, range 32, base 0x18c0, size  5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2935, revid=0x03
	domain=0, bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type I/O Port, range 32, base 0x18e0, size  5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
found->	vendor=0x8086, dev=0x2936, revid=0x03
	domain=0, bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[20]: type I/O Port, range 32, base 0x1c00, size  5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found->	vendor=0x8086, dev=0x293a, revid=0x03
	domain=0, bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type Memory, range 32, base 0xfc227000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
found->	vendor=0x8086, dev=0x2448, revid=0x93
	domain=0, bus=0, slot=30, func=0
	class=06-04-01, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2917, revid=0x03
	domain=0, bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x2929, revid=0x03
	domain=0, bus=0, slot=31, func=2
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 16 messages
	map[10]: type I/O Port, range 32, base 0x1c48, size  3, enabled
	map[14]: type I/O Port, range 32, base 0x183c, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x1c40, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x1838, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x1c20, size  5, enabled
	map[24]: type Memory, range 32, base 0xfc226000, size 11, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 16
found->	vendor=0x8086, dev=0x2930, revid=0x03
	domain=0, bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0103, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[10]: type Memory, range 64, base 0xfc227400, size  8, enabled
	map[20]: type I/O Port, range 32, base 0x1c60, size  5, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 23
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf4400000-0xf47fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 32764k stolen memory
vgapci1: <VGA-compatible display> mem 0xf4200000-0xf42fffff at device 2.1 on pci0
pci0: <simple comms> at device 3.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x1840-0x185f mem 0xfc000000-0xfc01ffff,0xfc025000-0xfc025fff irq 20 at device 25.0 on pci0
em0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
em0: using IRQ 256 for MSI
em0: Using MSI interrupt
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:21:86:61:f9:2c
uhci0: <Intel 82801I (ICH9) USB controller> port 0x1860-0x187f irq 20 at device 26.0 on pci0
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 50
uhci0: [MPSAFE]
uhci0: [ITHREAD]
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x1880-0x189f irq 21 at device 26.1 on pci0
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 51
uhci1: [MPSAFE]
uhci1: [ITHREAD]
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x18a0-0x18bf irq 22 at device 26.2 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 52
uhci2: [MPSAFE]
uhci2: [ITHREAD]
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc226c00-0xfc226fff irq 23 at device 26.7 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 53
ehci0: [MPSAFE]
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0xf000-0xfff
pcib1:   no prefetched decode
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pcib2:   domain            0
pcib2:   secondary bus     3
pcib2:   subordinate bus   3
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xf4300000-0xf43fffff
pcib2:   no prefetched decode
pci3: <ACPI PCI bus> on pcib2
pci3: domain=0, physical bus=3
found->	vendor=0x8086, dev=0x4236, revid=0x00
	domain=0, bus=3, slot=0, func=0
	class=02-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xf4300000, size 13, enabled
pcib2: requested memory range 0xf4300000-0xf4301fff: good
pcib2: matched entry for 3.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 17
iwn0: <Intel(R) PRO/Wireless 5300> mem 0xf4300000-0xf4301fff irq 17 at device 0.0 on pci3
iwn0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 257 to local APIC 0 vector 54
iwn0: using IRQ 257 for MSI
iwn0: MIMO 3T3R, MoW, address 00:16:ea:b2:59:44
iwn0: [MPSAFE]
iwn0: [ITHREAD]
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
pcib3: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0
pcib3:   domain            0
pcib3:   secondary bus     5
pcib3:   subordinate bus   12
pcib3:   I/O decode        0x2000-0x2fff
pcib3:   memory decode     0xf8000000-0xf9ffffff
pcib3:   prefetched decode 0xf4000000-0xf40fffff
pci5: <ACPI PCI bus> on pcib3
pci5: domain=0, physical bus=5
pcib4: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
pcib4:   domain            0
pcib4:   secondary bus     13
pcib4:   subordinate bus   20
pcib4:   I/O decode        0x3000-0x3fff
pcib4:   memory decode     0xfa000000-0xfbffffff
pcib4:   prefetched decode 0xf4100000-0xf41fffff
pci13: <ACPI PCI bus> on pcib4
pci13: domain=0, physical bus=13
uhci3: <Intel 82801I (ICH9) USB controller> port 0x18c0-0x18df irq 16 at device 29.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 55
uhci3: [MPSAFE]
uhci3: [ITHREAD]
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x18e0-0x18ff irq 17 at device 29.1 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 56
uhci4: [MPSAFE]
uhci4: [ITHREAD]
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x1c00-0x1c1f irq 18 at device 29.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 57
uhci5: [MPSAFE]
uhci5: [ITHREAD]
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfc227000-0xfc2273ff irq 19 at device 29.7 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 58
ehci1: [MPSAFE]
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5:   domain            0
pcib5:   secondary bus     21
pcib5:   subordinate bus   24
pcib5:   I/O decode        0x4000-0x7fff
pcib5:   memory decode     0xf4800000-0xf7ffffff
pcib5:   prefetched decode 0xf0000000-0xf3ffffff
pcib5:   Subtractively decoded bridge.
pci21: <ACPI PCI bus> on pcib5
pci21: domain=0, physical bus=21
found->	vendor=0x1180, dev=0x0476, revid=0xba
	domain=0, bus=21, slot=0, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf4800000, size 12, enabled
pcib5: requested memory range 0xf4800000-0xf4800fff: good
pcib5: matched entry for 21.0.INTA
pcib5: slot 0 INTA hardwired to IRQ 16
found->	vendor=0x1180, dev=0x0832, revid=0x04
	domain=0, bus=21, slot=0, func=1
	class=0c-00-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xf4801000, size 11, enabled
pcib5: requested memory range 0xf4801000-0xf48017ff: good
pcib5: matched entry for 21.0.INTB
pcib5: slot 0 INTB hardwired to IRQ 17
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xf4800000-0xf4800fff irq 16 at device 0.0 on pci21
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: [FILTER]
cbb0: PCI Configuration space:
  0x00: 0x04761180 0x02100107 0x060700ba 0x00822000 
  0x10: 0xf4800000 0x020000dc 0xb0181615 0xfffff000 
  0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 
  0x30: 0x00000000 0xfffffffc 0x00000000 0x07000110 
  0x40: 0x20c617aa 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x04a00001 0x00000000 0x04630463 0x00000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x01000000 0x00f00000 0x00000005 
  0xb0: 0x00000000 0xfa000000 0x00003000 0x00000000 
  0xc0: 0x20c617aa 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
fwohci0: vendor=1180, dev=832
fwohci0: vendor=1180, dev=832
fwohci0: <1394 Open Host Controller Interface> mem 0xf4801000-0xf48017ff irq 17 at device 0.1 on pci21
fwohci0: [MPSAFE]
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:06:1b:03:2a:30:89:71
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:30:89:71
fwe0: bpf attached
fwe0: Ethernet address: 02:06:1b:30:89:71
fwip0: <IP over FireWire> on firewire0
fwip0: bpf attached
fwip0: Firewire address: 00:06:1b:03:2a:30:89:71 @ 0xfffe00000000, S400, maxrec 2048
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1134000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel (ID=29298086) AHCI controller> port 0x1c48-0x1c4f,0x183c-0x183f,0x1c40-0x1c47,0x1838-0x183b,0x1c20-0x1c3f mem 0xfc226000-0xfc2267ff irq 16 at device 31.2 on pci0
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 4 3Gbps ports, PM not supported
atapci0: Caps: 64bit NCQ SNTF SS ALP AL CLO 3Gbps PMD SSC PSC 32cmd CCC eSATA 4ports
ata2: <ATA channel 0> on atapci0
ata2: AHCI reset...
ata2: hardware reset ...
ata2: SATA connect time=10ms status=00000113
ata2: ready wait time=49ms
ata2: software reset port 0...
ata2: ready wait time=0ms
ata2: SIGNATURE: 00000101
ata2: AHCI reset done: devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: AHCI reset...
ata3: hardware reset ...
ata3: SATA connect time=10ms status=00000113
ata3: port is not ready (timeout 10000ms) tfd = 00000080
ata3: hardware reset timeout
ata3: AHCI reset done: phy reset found no device
ata3: [MPSAFE]
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 60
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi0: wakeup code va 0xffffff803ab8c000 pa 0x4000
ex_isa_identify()
ahc_isa_probe 1: ioport 0x1c00 alloc failed
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xd2000-0xd2fff,0xde000-0xdf7ff,0xe0000-0xeffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est0: Invalid id16 (set, cur) = (2603, 18725)
est0: Can't check freq 2534, it may be invalid
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est1: Invalid id16 (set, cur) = (2603, 18725)
est1: Can't check freq 2534, it may be invalid
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Device configuration finished.
Reducing kern.maxvnodes 128857 -> 100000
procfs registered
lapic: Divisor 2, Frequency 133000749 Hz
Timecounter "TSC" frequency 2527014174 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attachedfirewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 

hptrr: no controller detected.
ata2: Identifying devices: 00000001
ata2: New devices: 00000001
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
battery0: battery initialization start
acpi_acad0: acline initialization start
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wireacpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times

ad4: setting UDMA100
ad4: 152627MB <HITACHI HTS722016K9SA00 DCDZC75A> at ata2-master UDMA100 SATA 1.5Gb/s
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
battery0: battery initialization done, tried 1 times
ad4: Intel check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
ata3: Identifying devices: 00000000
ata3: New devices: 00000000
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
(probe0:sbp0:0:0:0): Error 22, Unretryable error
(probe1:sbp0:0:1:0): Error 22, Unretryable error
(probe2:sbp0:0:2:0): Error 22, Unretryable error
(probe3:sbp0:0:3:0): Error 22, Unretryable error
(probe4:sbp0:0:4:0): Error 22, Unretryable error
(probe5:sbp0:0:5:0): Error 22, Unretryable error
(probe6:sbp0:0:6:0): Error 22, Unretryable error
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000200ef therm: 0x00010200 err: 0x000000f0 pmc: 0x00010400
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 1 vector 49
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 1 vector 50
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 51
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 52
msi: Assigning MSI IRQ 256 to local APIC 1 vector 53
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad4s1a
ct_to_ts([2011-02-09 00:56:33]) = 1297212993.000000000
start_init: trying /sbin/init
Loading configuration files.
Setting hostuuid: 1fd91681-49ff-11cb-836e-ad383d64a1f6.
Setting hostid: 0x4886c742.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
Starting file system checks:
/dev/ad4s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1a: clean, 223378 free (1794 frags, 27698 blocks, 0.4% fragmentation)
/dev/ad4s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1e: clean, 827445 free (237 frags, 103401 blocks, 0.0% fragmentation)
/dev/ad4s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1f: clean, 6254534 free (190918 frags, 757952 blocks, 0.7% fragmentation)
/dev/ad4s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s1d: clean, 700003 free (22243 frags, 84720 blocks, 2.2% fragmentation)
Mounting local file systems:
.
Setting hostname: hysteresis.mit.edu
.
wlan0: bpf attached
wlan0: bpf attached
wlan0: Ethernet address: 00:16:ea:b2:59:44
Starting Network: lo0 em0 iwn0 fwe0 fwip0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=3<RXCSUM,TXCSUM>
	inet 127.0.0.1 netmask 0xff000000 
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
	ether 00:21:86:61:f9:2c
	media: Ethernet autoselect
	status: no carrier
iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
	ether 00:16:ea:b2:59:44
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
	status: associated
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:06:1b:30:89:71
	ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	lladdr 0.6.1b.3.2a.30.89.71.a.2.ff.fe.0.0.0.0
Starting devd.
Starting Network: em0.
em0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
	ether 00:21:86:61:f9:2c
	media: Ethernet autoselect
	status: no carrier
Starting Network: fwe0.
fwe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=8<VLAN_MTU>
	ether 02:06:1b:30:89:71
	ch 1 dma -1
Starting Network: fwip0.
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
	lladdr 0.6.1b.3.2a.30.89.71.a.2.ff.fe.0.0.0.0
DHCPREQUEST on wlan0 to 255.255.255.255 port 67

DHCPACK from 18.111.96.1

bound to 18.111.127.186 -- renewal in 43200 seconds.

add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
add net fe80::: gateway ::1
add net ff02::: gateway ::1
Creating and/or trimming log files
.
Starting syslogd.
No core dumps found.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/graphviz /usr/local/lib/nss
32-bit compatibility ldconfig path: /usr/lib32
lock order reversal:
 1st 0xffffff80282f3ff8 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2579
 2nd 0xffffff0002b34a00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:283
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x2e
witness_checkorder() at witness_checkorder+0x81e
_sx_xlock() at _sx_xlock+0x55
ufsdirhash_acquire() at ufsdirhash_acquire+0x44
ufsdirhash_add() at ufsdirhash_add+0x19
ufs_direnter() at ufs_direnter+0x8bc
ufs_mkdir() at ufs_mkdir+0x41f
VOP_MKDIR_APV() at VOP_MKDIR_APV+0xb9
kern_mkdirat() at kern_mkdirat+0x270
syscall() at syscall+0x102
Xfast_syscall() at Xfast_syscall+0xe1
--- syscall (136, FreeBSD ELF64, mkdir), rip = 0x800732a7c, rsp = 0x7fffffffe7c8, rbp = 0x800c07050 ---
Clearing /tmp (X related).
Recovering vi editor sessions:
.
Starting default moused
.
Starting afsd.
Starting AFS cache scan...Memory cache: Allocating 2400 dcache entries...found 0 non-empty cache files (0%).
afsd: All AFS daemons started.
Updating motd:
.
Starting ntpd.
Configuring syscons:
 blanktime
 screensaver
splash: image decoder found: blank_saver
.
Starting cron.

Tue Feb  8 19:56:42 EST 2011
ts_to_ct(1297213011.885622396) = [2011-02-09 00:56:51]