OAuth Working Group M. Jones Internet-Draft Microsoft Intended status: Standards Track J. Bradley Expires: January 7, 2017 Ping Identity N. Sakimura NRI July 6, 2016 OAuth 2.0 Mix-Up Mitigation draft-ietf-oauth-mix-up-mitigation-01 Abstract This specification defines an extension to The OAuth 2.0 Authorization Framework that enables the authorization server to dynamically provide the client using it with additional information about the current protocol interaction that can be validated by the client and that enables the client to dynamically provide the authorization server with additional information about the current protocol interaction that can be validated by the authorization server. This additional information can be used by the client and the authorization server to prevent classes of attacks in which the client might otherwise be tricked into using inconsistent sets of metadata from multiple authorization servers, including potentially using a token endpoint that does not belong to the same authorization server as the authorization endpoint used. Recent research publications refer to these as "IdP Mix-Up" and "Malicious Endpoint" attacks. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on January 7, 2017. Jones, et al. Expires January 7, 2017 [Page 1] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 Copyright Notice Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Requirements Notation and Conventions . . . . . . . . . . 4 1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 4 2. The OAuth Issuer Identifier . . . . . . . . . . . . . . . . . 4 3. Mitigation Data Returned in Authorization Response . . . . . 5 3.1. Mitigation Data Returned in Authorization Response Parameters . . . . . . . . . . . . . . . . . . . . . . . 5 3.1.1. Example Authorization Response using Response Parameters . . . . . . . . . . . . . . . . . . . . . 5 3.2. Mitigation Data Returned in JWT . . . . . . . . . . . . . 6 3.2.1. Example Authorization Response using JWT . . . . . . 6 4. Validating the Authorization Response . . . . . . . . . . . . 7 5. Mitigation Data Sent to the Token Endpoint . . . . . . . . . 8 5.1. Example Token Request . . . . . . . . . . . . . . . . . . 8 6. Validating the Token Request . . . . . . . . . . . . . . . . 9 7. Security Considerations . . . . . . . . . . . . . . . . . . . 9 7.1. IdP Mix-Up and Malicious Endpoint Attacks . . . . . . . . 9 7.2. Duplicate Information Attacks . . . . . . . . . . . . . . 9 7.3. Cut-and-Paste Attacks . . . . . . . . . . . . . . . . . . 10 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 11 8.1. OAuth Parameters Registration . . . . . . . . . . . . . . 11 8.1.1. Registry Contents . . . . . . . . . . . . . . . . . . 11 9. References . . . . . . . . . . . . . . . . . . . . . . . . . 11 9.1. Normative References . . . . . . . . . . . . . . . . . . 11 9.2. Informative References . . . . . . . . . . . . . . . . . 12 Appendix A. Implementation Notes . . . . . . . . . . . . . . . . 13 Appendix B. Acknowledgements . . . . . . . . . . . . . . . . . . 13 Appendix C. Open Issues . . . . . . . . . . . . . . . . . . . . 14 Appendix D. Document History . . . . . . . . . . . . . . . . . . 14 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 14 Jones, et al. Expires January 7, 2017 [Page 2] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 1. Introduction OAuth 2.0 [RFC6749] clients use multiple authorization server endpoints when using some OAuth response types. For instance, when using the "code" response type, the client uses both the authorization endpoint and the token endpoint. It is important that endpoints belonging to the same authorization server always be used together. Otherwise, information produced by one authorization server could mistakenly be sent by the client to different authorization server, resulting in some of the attacks described in Section 7. Recent research publications refer to these specific attacks as "IdP Mix-Up" [arXiv.1601.01229v2] and "Malicious Endpoint" [arXiv.1508.04324v2] attacks. The client obviously cannot be confused into using endpoints from multiple authorization servers in an authorization flow if the client is configured to use only a single authorization server. However, the client can potentially be tricked into mixing endpoints if it is configured to use more than one authorization server, whether the configuration is dynamic or static. The client may be confused if it has no way to determine whether the set of endpoints belongs to the same authorization server. Or, a client may be confused simply because it is receiving authorization responses from more than one authorization server at the same redirection endpoint and the client is insufficiently able to determine that the response received is associated with the correct authorization server. This specification enables the authorization server to dynamically provide the client using it with additional information about the current protocol interaction that can be validated by the client and that enables the client to dynamically provide the authorization server with additional information about the current protocol interaction that can be validated by the authorization server. This enables them to abort interactions in which endpoints from multiple authorization servers would otherwise be used. The mitigation data provided by the authorization server to the client is an issuer identifier, which is used to identify the authorization server, and a client ID, which is used to verify that the response is from the correct authorization server and is intended for this client. The issuer identifier is defined in Section 2 of [OAuth.Discovery]. If supported by the authorization server, the issuer identifier can also be used to obtain a consistent set of metadata describing the authorization server configuration, as also described in [OAuth.Discovery]. This mitigation data is returned to the client in the authorization response. The syntax for returning the mitigation data from the Jones, et al. Expires January 7, 2017 [Page 3] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 authorization server is dependent upon the OAuth response type being used. The syntax used with the existing response types registered in the IANA "OAuth Authorization Endpoint Response Types" registry [IANA.OAuth.Parameters] as of the time of this writing is defined by this specification. Two of these response types are defined by RFC 6749 [RFC6749]; the rest are defined by [OAuth.Responses]. The mitigation data provided by the client to the authorization server is the existing "state" value defined by RFC 6749 [RFC6749], but adding also sending it from the client to the token endpoint. This is used by the authorization server to verify that the authorization code and state both belong to the same protocol interaction. 1.1. Requirements Notation and Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119]. 1.2. Terminology This specification uses the terms "Access Token", "Authorization Code", "Authorization Endpoint", "Authorization Grant", "Authorization Server", "Client", "Client Authentication", "Client Identifier", "Client Secret", "Grant Type", "Protected Resource", "Redirection URI", "Refresh Token", "Resource Owner", "Resource Server", "Response Type", and "Token Endpoint" defined by OAuth 2.0 [RFC6749], the terms "Claim Name", "Claim Value", and "JSON Web Token (JWT)" defined by JSON Web Token (JWT) [JWT]. 2. The OAuth Issuer Identifier The OAuth issuer identifier serves as a concrete identifier for the authorization server. As defined in [OAuth.Discovery], the issuer identifier is a URL that uses the "https" scheme and has no query or fragment components. Also as specified there, this is the location where ".well-known" RFC 5785 [RFC5785] resources containing information about the authorization server are published. In particular, when discovery is supported, the authorization server's metadata is retrieved as a JSON document [RFC7159] from a path derived from this URL. This metadata document contains a consistent set of metadata describing the authorization server configuration. Implementations supporting this specification MAY also support discovery or they MAY simply use the issuer identifier as a concrete identifier for the authorization server. This specification does not Jones, et al. Expires January 7, 2017 [Page 4] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 rely upon the authorization server publishing or the client retrieving a discovery metadata document. 3. Mitigation Data Returned in Authorization Response Mitigating the attacks relies on the authorization server returning additional data about the interaction and the client checking that data. The mitigation data returned is the client ID and the issuer identifier. The syntax for returning the mitigation data from the authorization server is dependent upon the OAuth response type being used. 3.1. Mitigation Data Returned in Authorization Response Parameters Some OAuth response types do not already return the issuer identifier and client ID in the authorization response. When this is the case, the mitigation data is returned as additional OAuth response parameters. These new response parameters are defined for this purpose: client_id Client that this response is intended for. It MUST contain the OAuth 2.0 client ID of the client as its value. iss Issuer identifier for the authorization server issuing the response. The "iss" value is a case-sensitive URL using the "https" scheme that contains scheme, host, and optionally, port number and path components and no query or fragment components. As of the time of this writing, these are the existing response types that are registered in the IANA "OAuth Authorization Endpoint Response Types" registry [IANA.OAuth.Parameters] that do not already return the issuer identifier and client ID in the authorization response: "code", "code token", "none", and "token". Therefore, the client ID and issuer are returned using the new authorization response parameters when using these response types. To avoid duplication, as discussed in Section 7.2, it is NOT RECOMMENDED to also return them in this manner when the response type already returns these values in the authorization response. 3.1.1. Example Authorization Response using Response Parameters The following example authorization response is to a request that used the "code" response type. It uses the "iss" and "client_id" response parameters to return the mitigation information to the client. Jones, et al. Expires January 7, 2017 [Page 5] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 The example successful authorization response follows (with line breaks within lines for display purposes only): HTTP/1.1 302 Found Location: https://client.example.org/cb? code=Qcb0Orv1zh30vL1MPRsbm-diHiMwcLyZvn1arpZv-Jxf_11jnpEX3Tgfvk &state=nrsz6AnHzPSVVBYRVTXV6ZTXQeg_eih7hdpewHNXmZ8 &iss=https://server.example.com &client_id=5d9e8a36-569d-4c40-8d6b-6e279ac1c5f1 3.2. Mitigation Data Returned in JWT As of the time of this writing, these are the existing response types that are registered in the IANA "OAuth Authorization Endpoint Response Types" registry [IANA.OAuth.Parameters] that already return the issuer identifier and client ID in the authorization response: "code id_token", "code id_token token", "id_token", and "id_token token". All of these return these values as the "iss" (issuer) claim value and as an "aud" (audience) claim value in a signed ID Token, which is a JSON Web Token [JWT], as specified in "OpenID Connect Core 1.0" [OpenID.Core]. When using these response types, the client MUST use the client ID and issuer values returned in the ID Token for validating the mitigation data. 3.2.1. Example Authorization Response using JWT The following example authorization response is to a request that used the "id_token token" response type. It uses the "iss" and "aud" claims in the ID Token to return the mitigation information to the client. Jones, et al. Expires January 7, 2017 [Page 6] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 The example successful authorization response follows (with line breaks within lines for display purposes only): HTTP/1.1 302 Found Location: https://client.example.org/cb# access_token=jHkWEdUXMU1BwAsC4vtUsZwnNvTIxEl0z9K3vx5KF0Y &token_type=Bearer &id_token=eyJraWQiOiIxZTlnZGs3IiwiYWxnIjoiUlMyNTYifQ. ewogImlzcyI6ICJodHRwczovL3NlcnZlci5leGFtcGxlLmNvbSIsCiAic3ViIjog IjI0ODI4OTc2MTAwMSIsCiAiYXVkIjogInM2QmhkUmtxdDMiLAogIm5vbmNlIjog Im4tMFM2X1d6QTJNaiIsCiAiZXhwIjogMTMxMTI4MTk3MCwKICJpYXQiOiAxMzEx MjgwOTcwLAogImF0X2hhc2giOiAiNzdRbVVQdGpQZnpXdEYyQW5wSzlSUSIKfQ. kdqTmftlaXg5WBYBr1wkxhkqCGZPc0k8vTiV5g2jj67jQ7XkrDamYx2bOkZLdZrp MPIzkdYB1nZI_G8vQGQuamRhJcEIt21kblGPZ-yhEhdkAiZIZLu38rChalDS2Mh0 glE_rke5XXRhmqqoEFFdziFdnO3p61-7y51co84OEAZvARSINQaOWIzvioRfs4zw IFOaT33Vpxfqr8HDyh31zo9eBW2dSQuCa071z0ENWChWoPliK1JCo_Bk9eDg2uwo 2ZwhsvHzj6TMQ0lYOTzufSlSmXIKfjlOsb3nftQeR697_hA-nMZyAdL8_NRfaC37 XnAbW8WB9wCfECp7cuNuOg &state=af0ifjsldkj Decoding the ID Token in the response will yield the following claims, which includes the mitigation information in the "iss" and "aud" claims: { "iss": "https://server.example.com", "sub": "248289761001", "aud": "s6BhdRkqt3", "nonce": "n-0S6_WzA2Mj", "exp": 1311281970, "iat": 1311280970, "at_hash": "77QmUPtjPfzWtF2AnpK9RQ" } 4. Validating the Authorization Response Upon receiving the mitigation data in an authorization response, the client MUST validate that the response was intended for it and that the authorization server metadata that it obtained at client registration time is consistent with the authorization server metadata contained in the metadata referenced by the issuer identifier. The client MUST validate the authorization server configuration as follows: 1. Compare the issuer identifier for the authorization server that the client received when it registered at the authorization Jones, et al. Expires January 7, 2017 [Page 7] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 server that it made the request to with the issuer value returned in the "iss" response parameter or the "iss" claim in the ID Token, depending upon the response type being used. If they do not exactly match, the client MUST NOT proceed with the authorization. 2. Verify that the response is intended for this client by confirming that the client's client identifier for the authorization server the request was made to matches the value of the "client_id" response parameter or that the client's client identifier is an audience value of the ID Token, depending upon the response type being used. If not, the client MUST NOT proceed with the authorization. 5. Mitigation Data Sent to the Token Endpoint Mitigating the attacks also relies on the client sending additional data about the interaction to the token endpoint, for response types that use it, and the authorization server checking that data. The mitigation data sent is the same state value that is sent in the authorization request and returned in the authorization response. This specification defines the new "state" token request parameter for passing this additional information. As of the time of this writing, these are the existing response types that are registered in the IANA "OAuth Authorization Endpoint Response Types" registry [IANA.OAuth.Parameters] that use the token endpoint: "code", "code id_token", "code id_token token", and "code token". The state value is to be sent in the "state" token request parameter when using these response types, and any new response types registered that use the token endpoint. 5.1. Example Token Request The following example token request is part of a protocol interaction that used the "code" response type. It uses the "state" request parameter to send mitigation information to the authorization server. Jones, et al. Expires January 7, 2017 [Page 8] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 The example of token request follows (with line breaks within lines for display purposes only): POST /token HTTP/1.1 Host: server.example.com Content-Type: application/x-www-form-urlencoded Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW grant_type=authorization_code &code=SplxlOBeZQQYbYS6WxSbIA &redirect_uri=https%3A%2F%2Fclient.example.org%2Fcb &state=ZSGXNBavNc-B3kU3DeJnZoWWOzYxsbvj7jp-S0x_z8U 6. Validating the Token Request When the authorization server receives a token request at the token endpoint that contains a value in the "state" parameter, it MUST validate that the state value received exactly matches the state value previously received in the corresponding authorization request. If the recorded state value and the state value received do not exactly match, the authorization server MUST NOT proceed with the authorization. 7. Security Considerations 7.1. IdP Mix-Up and Malicious Endpoint Attacks The attacks mitigated by this extension are described in detail in "A Comprehensive Formal Security Analysis of OAuth 2.0" [arXiv.1601.01229v2] and "On the security of modern Single Sign-On Protocols: Second-Order Vulnerabilities in OpenID Connect" [arXiv.1508.04324v2]. To mitigate these attacks, clients configured to use more than one authorization server should use authorization servers that return issuer and client ID information and should validate that a consistent set of authorization server endpoints are being used when using response types that utilize multiple endpoints. When registering, clients SHOULD NOT allow multiple authorization servers to return the same issuer value, and MUST NOT allow multiple authorization servers to return the same issuer and client ID value pair. 7.2. Duplicate Information Attacks If a protocol is defined to return the same information in multiple locations, this can create an additional attack surface. Knowing that the information is supposed to be the same, recipients will often be lazy and use the information from only one of the locations, Jones, et al. Expires January 7, 2017 [Page 9] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 not validating that all the supposedly duplicate instances are the same. This can enable attackers to create illegal protocol messages that have different values in the multiple locations and those illegal messages will not be detected or rejected by these lazy recipients. For this reason, if an OAuth profile is being used that returns the mitigation information defined by this specification in one location, it SHOULD NOT also be returned in another. In particular, if a JWT containing the client ID and issuer values is being returned in the authorization response, they SHOULD NOT also be returned as individual authorization response parameters. 7.3. Cut-and-Paste Attacks OAuth authorization responses are sent as redirects to redirection URIs, with the response parameters typically passed as URI query parameters or fragment values. A "cut-and-paste" attack is performed by the attacker creating what appears to be a legitimate authorization response, but that substitutes some of the response parameter values with values of the attacker's choosing. Sometimes this is done by copying or "cutting" some values out of a legitimate response and replacing or "pasting" some of these values into a different response, the original version of which may have also been legitimate, creating a combination of response values that are not legitimate and that may cause behaviors sought by the attacker. The Code Substitution threat described in Section 4.4.1.13 of [RFC6819] is one example of the use of a cut-and-paste attack. A concern with returning the mitigation information as new individual authorization response parameters whose values are not cryptographically bound together is that cut-and-paste attacks against their values will not be detected. A security analysis has not been done of the effects of the new attacks that the use of cut- and-paste against these new values will enable. To prevent replay of the state in another browser instance by an attacker, the state value MUST be tied to the browser instance in a way that cannot be forged by an attacker. Section 4 of [I-D.bradley-oauth-jwt-encoded-state] provides several examples of how a client can accomplish this. In the replay attack, the attacker can set cookies in the browser. Using an unsigned cookie to bind state to the browser is not sufficient. Jones, et al. Expires January 7, 2017 [Page 10] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 8. IANA Considerations 8.1. OAuth Parameters Registration This specification registers the following parameters in the IANA "OAuth Parameters" registry [IANA.OAuth.Parameters] established by RFC 6749 [RFC6749]. 8.1.1. Registry Contents o Parameter name: "client_id" o Parameter usage location: Authorization Response o Change controller: IESG o Specification document(s): Section 3.1 of [[ this specification ]] o Related information: None o Parameter name: "iss" o Parameter usage location: Authorization Response o Change controller: IESG o Specification document(s): Section 3.1 of [[ this specification ]] o Related information: None o Parameter name: "state" o Parameter usage location: Token Request o Change controller: IESG o Specification document(s): Section 5 of [[ this specification ]] o Related information: None 9. References 9.1. Normative References [IANA.OAuth.Parameters] IANA, "OAuth Parameters", . [JWT] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015, . [OAuth.Discovery] Jones, M., Sakimura, N., and J. Bradley, "OAuth 2.0 Discovery", draft-ietf-oauth-discovery-02 (work in progress), March 2016, . Jones, et al. Expires January 7, 2017 [Page 11] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 [OAuth.Responses] de Medeiros, B., Ed., Scurtescu, M., Tarjan, P., and M. Jones, "OAuth 2.0 Multiple Response Type Encoding Practices", February 2014, . [OpenID.Core] Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and C. Mortimore, "OpenID Connect Core 1.0", November 2014, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November 2003, . [RFC5785] Nottingham, M. and E. Hammer-Lahav, "Defining Well-Known Uniform Resource Identifiers (URIs)", RFC 5785, DOI 10.17487/RFC5785, April 2010, . [RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012, . [RFC6819] Lodderstedt, T., Ed., McGloin, M., and P. Hunt, "OAuth 2.0 Threat Model and Security Considerations", RFC 6819, DOI 10.17487/RFC6819, January 2013, . [RFC7159] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data Interchange Format", RFC 7159, DOI 10.17487/RFC7159, March 2014, . [RFC7662] Richer, J., Ed., "OAuth 2.0 Token Introspection", RFC 7662, DOI 10.17487/RFC7662, October 2015, . 9.2. Informative References Jones, et al. Expires January 7, 2017 [Page 12] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 [arXiv.1508.04324v2] Mladenov, V., Mainka, C., and J. Schwenk, "On the security of modern Single Sign-On Protocols: Second-Order Vulnerabilities in OpenID Connect", arXiv 1508.04324v2, January 2016, . [arXiv.1601.01229v2] Fett, D., Kuesters, R., and G. Schmitz, "A Comprehensive Formal Security Analysis of OAuth 2.0", arXiv 1601.01229v2, January 2016, . [I-D.bradley-oauth-jwt-encoded-state] Bradley, J., Lodderstedt, T., and H. Zandbelt, "Encoding claims in the OAuth 2 state parameter using a JWT", draft- bradley-oauth-jwt-encoded-state-05 (work in progress), December 2015. [RFC7591] Richer, J., Ed., Jones, M., Bradley, J., Machulak, M., and P. Hunt, "OAuth 2.0 Dynamic Client Registration Protocol", RFC 7591, DOI 10.17487/RFC7591, July 2015, . Appendix A. Implementation Notes The authorization server can compare the two state values either by recording the complete state value between the authorization request and the token request, possibly in the same data structure in which the authorization code issued was recorded, or by recording only a cryptographic hash of the state value, possibly resulting in substantial size savings. Appendix B. Acknowledgements Alfred Albrecht, John Bradley, Brian Campbell, Joerg Connotte, William Denniss, Sebastian Ebling, Florian Feldmann, Daniel Fett, Roland Hedberg, Phil Hunt, Ralf Kuesters, Torsten Lodderstedt, Christian Mainka, Vladislav Mladenov, Anthony Nadalin, Justin Richer, Nat Sakimura, Antonio Sanso, Guido Schmitz, Joerg Schwenk, Hannes Tschofenig, and Hans Zandbelt all contributed to the discussions that led to the creation of this specification. This specification is partially based on the OpenID Connect Core 1.0 specification, which was produced by the OpenID Connect working group of the OpenID Foundation. Jones, et al. Expires January 7, 2017 [Page 13] Internet-Draft OAuth 2.0 Mix-Up Mitigation July 2016 Appendix C. Open Issues o We need to do a security analysis of the cut-and-paste attacks that may be enabled when mitigation information is returned to the client using individual authorization response parameters. Appendix D. Document History [[ to be removed by the RFC Editor before publication as an RFC ]] -01 o Changed terms "issuer URL" and "configuration information location" to "issuer identifier" so that consistent terminology is used for this. -00 o Created the initial working group draft from draft-jones-oauth- mix-up-mitigation-01 with no normative changes and adding Nat Sakimura as an editor. Authors' Addresses Michael B. Jones Microsoft Email: mbj@microsoft.com URI: http://self-issued.info/ John Bradley Ping Identity Email: ve7jtb@ve7jtb.com URI: http://www.thread-safe.com/ Nat Sakimura Nomura Research Institute, Ltd. Email: n-sakimura@nri.co.jp URI: http://nat.sakimura.org/ Jones, et al. Expires January 7, 2017 [Page 14]