COM App Example (ActiveQt)

  class Application : public QObject
  {
      Q_OBJECT

      Q_CLASSINFO("ClassID", "{b50a71db-c4a7-4551-8d14-49983566afee}")
      Q_CLASSINFO("InterfaceID", "{4a427759-16ef-4ed8-be79-59ffe5789042}")
      Q_CLASSINFO("RegisterObject", "yes")

      Q_PROPERTY(DocumentList* documents READ documents)
      Q_PROPERTY(QString id READ id)
      Q_PROPERTY(bool visible READ isVisible WRITE setVisible)

  public:
      Application(QObject *parent = 0);
      DocumentList *documents() const;

      QString id() const { return objectName(); }

      void setVisible(bool on);
      bool isVisible() const;

      QTabWidget *window() const { return ui; }

  public slots:
      void quit();

  private:
      DocumentList *docs;

      QTabWidget *ui;
  };

The first class Application represents the application object. It exposes read-only properties documents and id to get access to the list of documents, and an identifier. A read/write property visible controls whether the QTabWidget-based user interface of the application should be visible, and a slot quit() terminates the application.

The RegisterObject attribute is set to make sure that instances of this class are registered in COM's running object table (ROT) - this allows COM clients to connect to an already instantiated COM object.

  class DocumentList : public QObject
  {
      Q_OBJECT

      Q_CLASSINFO("ClassID", "{496b761d-924b-4554-a18a-8f3704d2a9a6}")
      Q_CLASSINFO("InterfaceID", "{6c9e30e8-3ff6-4e6a-9edc-d219d074a148}")

      Q_PROPERTY(Application* application READ application)
      Q_PROPERTY(int count READ count)

  public:
      DocumentList(Application *application);

      int count() const;
      Application *application() const;

  public slots:
      Document *addDocument();
      Document *item(int index) const;

  private:
      QList<Document*> list;
  };

The DocumentList class stores a list of documents. It provides an API to read the number of documents, to access each document by index and to create a new document. The application property returns the root object.

  class Document : public QObject
  {
      Q_OBJECT

      Q_CLASSINFO("ClassID", "{2b5775cd-72c2-43da-bc3b-b0e8d1e1c4f7}")
      Q_CLASSINFO("InterfaceID", "{2ce1761e-07a3-415c-bd11-0eab2c7283de}")

      Q_PROPERTY(Application *application READ application)
      Q_PROPERTY(QString title READ title WRITE setTitle)

  public:
      Document(DocumentList *list);
      ~Document();

      Application *application() const;

      QString title() const;
      void setTitle(const QString &title);

  private:
      QWidget *page;
  };

The Document class finally represents a document in the application. Each document is represented by a page in the application's tab widget, and has a title that is readable and writable through the document's API. The application property again returns the root object.

  Document::Document(DocumentList *list)
  : QObject(list)
  {
      QTabWidget *tabs = list->application()->window();
      page = new QWidget(tabs);
      page->setWindowTitle("Unnamed");
      tabs->addTab(page, page->windowTitle());

      page->show();
  }

  Document::~Document()
  {
      delete page;
  }

  Application *Document::application() const
  {
      return qobject_cast<DocumentList*>(parent())->application();
  }

  QString Document::title() const
  {
      return page->windowTitle();
  }

  void Document::setTitle(const QString &t)
  {
      page->setWindowTitle(t);

      QTabWidget *tabs = application()->window();
      int index = tabs->indexOf(page);
      tabs->setTabText(index, page->windowTitle());
  }

The implementation of the Document class creates a new page for the tab widget, and uses the title of that page for the title property. The page is deleted when the document is deleted.

  DocumentList::DocumentList(Application *application)
  : QObject(application)
  {
  }

  Application *DocumentList::application() const
  {
      return qobject_cast<Application*>(parent());
  }

  int DocumentList::count() const
  {
      return list.count();
  }

  Document *DocumentList::item(int index) const
  {
      if (index >= list.count())
          return 0;

      return list.at(index);
  }

  Document *DocumentList::addDocument()
  {
      Document *document = new Document(this);
      list.append(document);

      return document;
  }

The DocumentList implementation is straightforward.

  Application::Application(QObject *parent)
  : QObject(parent), ui(0)
  {
      ui = new QTabWidget;

      setObjectName("From QAxFactory");
      docs = new DocumentList(this);
  }

  DocumentList *Application::documents() const
  {
      return docs;
  }

  void Application::setVisible(bool on)
  {
      ui->setVisible(on);
  }

  bool Application::isVisible() const
  {
      return ui->isVisible();
  }

  void Application::quit()
  {
      delete docs;
      docs = 0;

      delete ui;
      ui = 0;
      QTimer::singleShot(0, qApp, SLOT(quit()));
  }

  #include "main.moc"

The Application class initializes the user interface in the constructor, and shows and hides it in the implementation of setVisible(). The object name (accessible through the id property) is set to "From QAxFactory" to indicate that this COM object has been created by COM. Note that there is no destructor that would delete the QTabWidget - this is instead done in the quit() slot, before calling quit() through a single-shot-timer, which is necessary to ensure that the COM call to the slot is complete.

  QAXFACTORY_BEGIN("{edd3e836-f537-4c6f-be7d-6014c155cc7a}", "{b7da3de8-83bb-4bbe-9ab7-99a05819e201}")
     QAXCLASS(Application)
     QAXTYPE(Document)
     QAXTYPE(DocumentList)
  QAXFACTORY_END()

The classes are exported from the server using the QAxFactory macros. Only Application objects can be instantiated from outside - the other APIs can only be used after accessing the respective objects throughout the Application API.

  int main(int argc, char **argv)
  {
      QApplication app(argc, argv);
      app.setQuitOnLastWindowClosed(false);

      // started by COM - don't do anything
      if (QAxFactory::isServer())
          return app.exec();

      // started by user
      Application appobject(0);
      appobject.setObjectName("From Application");

      QAxFactory::startServer();
      QAxFactory::registerActiveObject(&appobject);

      appobject.setVisible(true);

      QObject::connect(&app, &QGuiApplication::lastWindowClosed, &appobject, &Application::quit);

      return app.exec();
  }

The main() entry point function creates a QApplication, and just enters the event loop if the application has been started by COM. If the application has been started by the user, then the Application object is created and the object name is set to "From Application". Then the COM server is started, and the application object is registered with COM. It is now accessible to COM clients through the client-specific APIs.

Application exiting is controlled explicitly - if COM started the application, then the client code has to call quit(); if the user started the application, then the application terminates when the last window has been closed.

Finally, the user interface is made visible, and the event loop is started.

A simple Visual Basic application could now access this Qt application. In VB, start a new "Standard Exe" project and add a project reference to the comappLib type library. Create a form with a listbox "DocumentList", a static label "DocumentsCount" and a command button "NewDocument". Finally, implement the code for the form like this:

  Private Application As comappLib.Application
  Private MyApp As Boolean

  Private Sub UpdateList()
      DocumentList.Clear
      DocumentsCount.Caption = Application.documents.Count
      For Index = 0 To Application.documents.Count - 1
         DocumentList.AddItem (Application.documents.Item(Index).Title)
      Next
  End Sub

  Private Sub Form_Load()
      On Error GoTo CreateNew
      Set Application = GetObject(, "comapp.Application")
      MyApp = False
      GoTo Initialized
  CreateNew:
      On Error GoTo InitializeFailed
      Set Application = New Application
      Application.Visible = True
      MyApp = True
  Initialized:
      Caption = Application.id
      UpdateList
  InitializeFailed:
  End Sub

  Private Sub Form_Unload(Cancel As Integer)
      If MyApp Then
          Application.quit
      End If
  End Sub

  Private Sub NewDocument_Click()
      Application.documents.addDocument
      UpdateList
  End Sub

To build the example you must first build the QAxServer library. Then run qmake and your make tool in examples\activeqt\comapp.

Files:

• activeqt/comapp/main.cpp
• activeqt/comapp/comapp.pro