QML Video Shader Effects Example

Running the Example

To run the example from Qt Creator, open the Welcome mode and select the example from Examples. For more information, visit Building and Running an Example.

Overview

QML Video Shader Effects demonstrates how a ShaderEffect can be used to apply postprocessing effects, expressed in GLSL, to QML VideoOutput type.

It also shows how native code can be combined with QML to implement more advanced functionality - in this case, C++ code is used to calculate the QML frame rate. This value is rendered in QML in a semi-transparent item overlaid on the video content.

The following screenshots show shader effects being applied. In each case, the effect is implemented using a fragment shader.

Here we see an edge detection algorithm being applied to a video clip (Sintel from blender.org).

This image shows a page curl effect, applied to the same video clip.

Here we see a 'glow' effect (edge detection plus colour quantization) being applied to the camera viewfinder.

This image shows a 'wobble' effect applied to the viewfinder.

The application includes many more effects than the ones shown here - look for Effect*.qml files in the list of files below to see the full range.

Application structure

Shader effects can be applied to video or viewfinder content using ShaderEffect, as shown in the following example, which applies a wiggly effect to the content:


  import QtQuick 2.0
  import QtMultimedia 5.0

  Rectangle {
      width: 300
      height: 300
      color: "black"

      MediaPlayer {
          id: mediaPlayer
          source: "test.mp4"
          playing: true
      }

      VideoOutput {
          id: video
          anchors.fill: parent
          source: mediaPlayer
      }

      ShaderEffect {
          property variant source: ShaderEffectSource { sourceItem: video; hideSource: true }
          property real wiggleAmount: 0.005
          anchors.fill: video

          fragmentShader: "
              varying highp vec2 qt_TexCoord0;
              uniform sampler2D source;
              uniform highp float wiggleAmount;
              void main(void)
              {
                  highp vec2 wiggledTexCoord = qt_TexCoord0;
                  wiggledTexCoord.s += sin(4.0 * 3.141592653589 * wiggledTexCoord.t) * wiggleAmount;
                  gl_FragColor = texture2D(source, wiggledTexCoord.st);
              }
          "
      }
  }

In this application, the usage of the ShaderEffect and VideoOutput types is a bit more complicated, for the following reasons:

Each effect can be applied to either a VideoOutput or an Image item, so the type of the source item must be abstracted away from the effect implementation
For some effects (such as the edge detection and glow examples shown in the screenshots above), the transformation is applied only to pixels to the left of a dividing line - this allows the effect to be easily compared with the untransformed image on the right
Most effects have one or more parameters which can be modified by the user - these are controlled by sliders in the UI which are connected to uniform values passed into the GLSL code

The abstraction of source item type is achieved by the Content, which uses a Loader to create either a MediaPlayer, Camera or Image:


  import QtQuick 2.1

  Rectangle {
      ...
      Loader {
          id: contentLoader
      }

      ...
      function openImage(path) {
          stop()
          contentLoader.source = "ContentImage.qml"
          contentLoader.item.source = path
      }

      function openVideo(path) {
          stop()
          contentLoader.source = "ContentVideo.qml"
          contentLoader.item.mediaSource = path
      }

      function openCamera() {
          stop()
          contentLoader.source = "ContentCamera.qml"
      }

  }

Each effect is implemented as a QML item which is based on the Effect, which in turn is based on the ShaderEffect:


  import QtQuick 2.0

  ShaderEffect {
      property variant source
      property ListModel parameters: ListModel { }
      property bool divider: true
      property real dividerValue: 0.5
      property real targetWidth: 0
      property real targetHeight: 0
      property string fragmentShaderFilename
      property string vertexShaderFilename

      QtObject {
          id: d
          property string fragmentShaderCommon: "
              #ifdef GL_ES
                  precision mediump float;
              #else
              #   define lowp
              #   define mediump
              #   define highp
              #endif // GL_ES
          "
      }

      // The following is a workaround for the fact that ShaderEffect
      // doesn't provide a way for shader programs to be read from a file,
      // rather than being inline in the QML file

      onFragmentShaderFilenameChanged:
          fragmentShader = d.fragmentShaderCommon + fileReader.readFile(":shaders/" + fragmentShaderFilename)
      onVertexShaderFilenameChanged:
          vertexShader = fileReader.readFile(vertexShaderFilename)
  }

The interface of Effect allows for derived effects to specify the number of parameters which they support (and therefore the number of sliders which should be displayed), and whether a vertical dividing line should be drawn between transformed and untransformed image regions. As an example, here is the implementation of the pixelation effect. As you can see, the pixelation effect supports one parameter (which controls the pixelation granularity), and states that the divider should be displayed.


  import QtQuick 2.0

  Effect {
      parameters: ListModel {
          ListElement {
              name: "Granularity"
              value: 0.5
          }
          onDataChanged: updateParameters()
      }

      function updateParameters()
      {
              granularity = parameters.get(0).value * 20.0;
      }

      // Transform slider values, and bind result to shader uniforms
      property real granularity: 0.5 * 20

      fragmentShaderFilename: "pixelate.fsh"
  }

The main.qml file shows a FileOpen, which allows the user to select the input source and an EffectSelectionPanel item, which lists each of the available shader effects. As described above, a Content item is used to load the appropriate input and effect type. A Divider item draws the vertical dividing line, which can be dragged left / right by the user. Finally, a ParameterPanel item renders the sliders corresponding to each effect parameter.

Here is the effect selection menu:

Calculating and displaying QML painting rate

The QML painting rate is calculated by the FrequencyMonitor class, which turns a stream of events (received via the notify() slot), into an instantaneous and an averaged frequency:


  class FrequencyMonitor : public QObject
  {
      Q_OBJECT
      Q_PROPERTY(qreal instantaneousFrequency READ instantaneousFrequency NOTIFY instantaneousFrequencyChanged)
      Q_PROPERTY(qreal averageFrequency READ averageFrequency NOTIFY averageFrequencyChanged)

  public:
      ...
      static void qmlRegisterType();

  public slots:
      Q_INVOKABLE void notify();
  };

The FrequencyMonitor class is exposed to QML like this


  void FrequencyMonitor::qmlRegisterType()
  {
      ::qmlRegisterType<FrequencyMonitor>("FrequencyMonitor", 1, 0, "FrequencyMonitor");
  }

and its data is displayed by defining a QML item called FrequencyItem, like this:


  import FrequencyMonitor 1.0

  Rectangle {
      id: root
      ...
      function notify() {
          monitor.notify()
      }

      FrequencyMonitor {
          id: monitor
          onAverageFrequencyChanged: {
              averageFrequencyText.text = monitor.averageFrequency.toFixed(2)
          }
      }

      Text {
          id: labelText
          anchors {
              left: parent.left
              top: parent.top
              margins: 10
          }
          color: root.textColor
          font.pixelSize: 0.6 * root.textSize
          text: root.label
          width: root.width - 2*anchors.margins
          elide: Text.ElideRight
      }

      Text {
          id: averageFrequencyText
          anchors {
              right: parent.right
              bottom: parent.bottom
              margins: 10
          }
          color: root.textColor
          font.pixelSize: root.textSize
      }
  }

The result looks like this:

All that remains is to connect the afterRendering() signal of the QQuickView object to a JavaScript function, which will eventually call frequencyItem.notify():


  #include <QtGui/QGuiApplication>
  #include <QtQuick/QQuickItem>
  #include <QtQuick/QQuickView>
  #include "filereader.h"
  #include "trace.h"

  #ifdef PERFORMANCEMONITOR_SUPPORT
  #include "performancemonitordeclarative.h"
  #endif

  int main(int argc, char *argv[])
  {
      QGuiApplication app(argc, argv);

      ...
      QQuickItem *rootObject = viewer.rootObject();
      ...
      QObject::connect(&viewer, SIGNAL(afterRendering()),
                       rootObject, SLOT(qmlFramePainted()));

Files:

Images:

Contents

QML Video Shader Effects Example

Running the Example

Overview

Application structure

Calculating and displaying QML painting rate