#!/bin/sh

cd /athena10-intrepid

touch preseed

pxetype=""

netconfig () {
  echo "Configuring network..."
  mp=/athena10-intrepid
  export IPADDR NETMASK GATEWAY SYSTEM CONTROL
  while [ -z "$IPADDR" ] ; do
    echo -n "Enter IP address: "
    read IPADDR
  done
  NETMASK=`$mp/athena/netparams -f $mp/athena/masks $IPADDR|cut -d\  -f 1`
  net=`$mp/athena/netparams -f $mp/athena/masks $IPADDR|cut -d\  -f 2`
  bc=`$mp/athena/netparams -f $mp/athena/masks $IPADDR|cut -d\  -f 3`
  GATEWAY=`$mp/athena/netparams -f $mp/athena/masks $IPADDR|cut -d\  -f 4`
  maskbits=`$mp/athena/netparams -f $mp/athena/masks $IPADDR|cut -d\  -f 5`

  echo "Autoconfigured settings:"
  echo "  Netmask bits: $maskbits"
  echo "  Broadcast: $bc"
  echo "  Gateway: $GATEWAY"
  echo -n "Are these OK? [Y/n]: "; read response
  case $response in
    y|Y|"") ;;
    *) 
    echo -n "Netmask bits [$maskbits]: "; read r; if [ "$r" ] ; then maskbits=$r ; fi
    echo -n "Broadcast [$bc]: "; read r; if [ "$r" ] ; then bc=$r ; fi
    echo -n "Gateway [$GATEWAY]: "; read r; if [ "$r" ] ; then GATEWAY=$r ; fi
    esac

  # We can not set the hostname here; running "debconf-set netcfg/get_hostname"
  # causes fatal reentry problems.  Setting values directly with preseeding
  # also fails, as the DHCP values override it.
  echo "Killing dhcp client."
  killall dhclient
  echo "Running: ip addr flush dev eth0"
  ip addr flush dev eth0
  echo "Running: ip addr add $IPADDR/$maskbits broadcast $bc dev eth0"
  ip addr add $IPADDR/$maskbits broadcast $bc dev eth0
  echo "Flushing old default route."
  route delete default 2> /dev/null
  echo "Running: route add default gw $GATEWAY"
  route add default gw $GATEWAY
  echo "Replacing installer DHCP nameserver with MIT nameservers."
  sed -e '/nameserver/s/ .*/ 18.72.0.3/' < /etc/resolv.conf > /etc/resolv.conf.new
  echo "nameserver	18.70.0.160" >> /etc/resolv.conf.new
  echo "nameserver	18.71.0.151" >> /etc/resolv.conf.new
  mv -f /etc/resolv.conf.new /etc/resolv.conf
}


echo "Welcome to Athena 10."
echo

while [ -z "$pxetype" ] ; do
  echo "Choose one:"
  echo
  echo "  1: Perform an unattended Athena 10 install, WIPING OUT your ENTIRE DISK."
  echo "     This will give you a CLUSTER-style \"public workstation\" setup,"
  echo "     and you hereby agree with the license terms at:"
  echo "     <http://dlc.sun.com/dlj/DLJ-v1.1.txt>,"
  echo "     Sun's Operating System Distributor License for Java version 1.1."
  echo "  2: Do a normal Athena 10 install.  You'll need to answer normal Ubuntu"
  echo "     install prompts, and then the Athena-10-specific prompts, including"
  echo "     choosing which flavor of Athena 10 you'd like."
  echo "  8: Punt to a completely  vanilla install of Ubuntu 8.10 (Intrepid Ibex)"
  echo "     (Note: locale and keyboard have already been set.)"
  echo
  echo "  9: /bin/sh (for rescue purposes)"
  echo
  echo -n "Choose: "
  read r
  case "$r" in
    1)
      echo "Athena 10 CLUSTER it is."; pxetype=cluster ;;
    2)
      echo "Normal Athena 10 install it is."; pxetype=choose ;;
    8)
      echo "Vanilla Ubuntu it is."; pxetype=vanilla;;
    9)
      echo "Here's a shell.  You'll return to this prompt when done."
      /bin/sh;;
    *)
      echo "Choose one of the above, please.";;
  esac
done

##############################################################################

if [ vanilla = $pxetype ] ; then
  echo "WARNING: if you let the system default to using a DHCP address, this"
  echo "may not work for you, as you won't be able to reach the off-campus"
  echo "Ubuntu repositories.  If you cancelled that and configured manually,"
  echo "or otherwise believe you have a functional address, you can continue."
  echo "Would you like to configure a static address before switching back to"
  echo -n "a vanilla Ubuntu install?  [y/N]: "
  while : ; do
    read r
    case "$r" in
      N*|n*|"") break;;
      y*|Y*) netconfig; break;;
    esac
    echo -n "Choose: [y/N]: "
  done

  echo "Starting normal Ubuntu install in five seconds."
  sleep 5
  exit 0
fi

if [ cluster = $pxetype ] ; then
  cat << EOF

************************************************************
               DESTROYS
THIS PROCEDURE DESTROYS THE CONTENTS OF THE HARD DISK.
               DESTROYS

IF YOU DO NOT WISH TO CONTINUE, REBOOT NOW.

************************************************************

EOF
  echo "Installing autoinstall preseed file."
  egrep -v '(^$|^#)' < preseed.autoinstall >> preseed
fi

# Set up a usable static network config, since the DHCP address is not very useful.
netconfig

# Shovel in the generically useful preseed stuff regardless.
egrep -v '(^$|^#)' < preseed.common >> preseed
# ...and the specified network config.
cat >> preseed <<EOF
d-i netcfg/get_nameservers string 18.72.0.3
d-i netcfg/get_ipaddress string $IPADDR
d-i netcfg/get_netmask string $NETMASK
d-i netcfg/get_gateway string $GATEWAY
d-i netcfg/confirm_static boolean true
EOF

# This is used by the final installer step.
# A hardcoded number is used as DNS may still be iffy.
echo "Fetching Athena 10 postinstaller."
# 18.92.2.195 = OLD athena10.mit.edu
# 18.9.60.73 = NEW athena10.mit.edu
wget http://18.9.60.73/install-debathena.sh

# Let the postinstall know what we are up to.
echo "$pxetype" > $mp/pxe-install-flag

echo "Initial Athena 10 installer complete; exiting preconfig to start main install."
echo "Hit return to continue."
read r
exit 0