/* * Copyright (C) 1996-2002 Michael R. Elkins * Copyright (C) 2004 g10 Code GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #ifdef _MAKEDOC # include "config.h" # include "makedoc-defs.h" #else # include "sort.h" #endif #include "buffy.h" #ifndef _MAKEDOC #define DT_MASK 0x0f #define DT_BOOL 1 /* boolean option */ #define DT_NUM 2 /* a number */ #define DT_STR 3 /* a string */ #define DT_PATH 4 /* a pathname */ #define DT_QUAD 5 /* quad-option (yes/no/ask-yes/ask-no) */ #define DT_SORT 6 /* sorting methods */ #define DT_RX 7 /* regular expressions */ #define DT_MAGIC 8 /* mailbox type */ #define DT_SYN 9 /* synonym for another variable */ #define DT_ADDR 10 /* e-mail address */ #define DTYPE(x) ((x) & DT_MASK) /* subtypes */ #define DT_SUBTYPE_MASK 0xf0 #define DT_SORT_ALIAS 0x10 #define DT_SORT_BROWSER 0x20 #define DT_SORT_KEYS 0x40 #define DT_SORT_AUX 0x80 /* flags to parse_set() */ #define M_SET_INV (1<<0) /* default is to invert all vars */ #define M_SET_UNSET (1<<1) /* default is to unset all vars */ #define M_SET_RESET (1<<2) /* default is to reset all vars to default */ /* forced redraw/resort types */ #define R_NONE 0 #define R_INDEX (1<<0) #define R_PAGER (1<<1) #define R_RESORT (1<<2) /* resort the mailbox */ #define R_RESORT_SUB (1<<3) /* resort subthreads */ #define R_RESORT_INIT (1<<4) /* resort from scratch */ #define R_TREE (1<<5) /* redraw the thread tree */ #define R_BOTH (R_INDEX | R_PAGER) #define R_RESORT_BOTH (R_RESORT | R_RESORT_SUB) struct option_t { char *option; short type; short flags; unsigned long data; unsigned long init; /* initial value */ }; #define UL (unsigned long) #endif /* _MAKEDOC */ #ifndef ISPELL #define ISPELL "ispell" #endif struct option_t MuttVars[] = { /*++*/ { "abort_nosubject", DT_QUAD, R_NONE, OPT_SUBJECT, M_ASKYES }, /* ** .pp ** If set to \fIyes\fP, when composing messages and no subject is given ** at the subject prompt, composition will be aborted. If set to ** \fIno\fP, composing messages with no subject given at the subject ** prompt will never be aborted. */ { "abort_unmodified", DT_QUAD, R_NONE, OPT_ABORT, M_YES }, /* ** .pp ** If set to \fIyes\fP, composition will automatically abort after ** editing the message body if no changes are made to the file (this ** check only happens after the \fIfirst\fP edit of the file). When set ** to \fIno\fP, composition will never be aborted. */ { "alias_file", DT_PATH, R_NONE, UL &AliasFile, UL "~/.muttrc" }, /* ** .pp ** The default file in which to save aliases created by the ** ``$create-alias'' function. ** .pp ** \fBNote:\fP Mutt will not automatically source this file; you must ** explicitly use the ``$source'' command for it to be executed. ** .pp ** The default for this option is the currently used muttrc file, or ** ``~/.muttrc'' if no user muttrc was found. */ { "alias_format", DT_STR, R_NONE, UL &AliasFmt, UL "%4n %2f %t %-10a %r" }, /* ** .pp ** Specifies the format of the data displayed for the `alias' menu. The ** following printf(3)-style sequences are available: ** .pp ** .dl ** .dt %a .dd alias name ** .dt %f .dd flags - currently, a "d" for an alias marked for deletion ** .dt %n .dd index number ** .dt %r .dd address which alias expands to ** .dt %t .dd character which indicates if the alias is tagged for inclusion ** .de */ { "allow_8bit", DT_BOOL, R_NONE, OPTALLOW8BIT, 1 }, /* ** .pp ** Controls whether 8-bit data is converted to 7-bit using either Quoted- ** Printable or Base64 encoding when sending mail. */ { "allow_ansi", DT_BOOL, R_NONE, OPTALLOWANSI, 0 }, /* ** .pp ** Controls whether ANSI color codes in messages (and color tags in ** rich text messages) are to be interpreted. ** Messages containing these codes are rare, but if this option is set, ** their text will be colored accordingly. Note that this may override ** your color choices, and even present a security problem, since a ** message could include a line like "[-- PGP output follows ..." and ** give it the same color as your attachment color. */ { "arrow_cursor", DT_BOOL, R_BOTH, OPTARROWCURSOR, 0 }, /* ** .pp ** When set, an arrow (``->'') will be used to indicate the current entry ** in menus instead of highlighting the whole line. On slow network or modem ** links this will make response faster because there is less that has to ** be redrawn on the screen when moving to the next or previous entries ** in the menu. */ { "ascii_chars", DT_BOOL, R_BOTH, OPTASCIICHARS, 0 }, /* ** .pp ** If set, Mutt will use plain ASCII characters when displaying thread ** and attachment trees, instead of the default \fIACS\fP characters. */ { "askbcc", DT_BOOL, R_NONE, OPTASKBCC, 0 }, /* ** .pp ** If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients ** before editing an outgoing message. */ { "askcc", DT_BOOL, R_NONE, OPTASKCC, 0 }, /* ** .pp ** If set, Mutt will prompt you for carbon-copy (Cc) recipients before ** editing the body of an outgoing message. */ { "assumed_charset", DT_STR, R_NONE, UL &AssumedCharset, UL 0}, /* ** .pp ** This variable is a colon-separated list of character encoding ** schemes for messages without character encoding indication. ** Header field values and message body content without character encoding ** indication would be assumed that they are written in one of this list. ** By default, all the header fields and message body without any charset ** indication are assumed to be in "us-ascii". ** .pp ** For example, Japanese users might prefer this: ** .pp ** set assumed_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" ** .pp ** However, only the first content is valid for the message body. */ { "attach_charset", DT_STR, R_NONE, UL &AttachCharset, UL 0 }, /* ** .pp ** This variable is a colon-separated list of character encoding ** schemes for text file attachments. ** If unset, $$charset value will be used instead. ** For example, the following configuration would work for Japanese ** text handling: ** .pp ** set attach_charset="iso-2022-jp:euc-jp:shift_jis:utf-8" ** .pp ** Note: "iso-2022-*" must be put at the head of the value as shown above ** if included. */ { "attach_format", DT_STR, R_NONE, UL &AttachFormat, UL "%u%D%I %t%4n %T%.40d%> [%.7m/%.10M, %.6e%?C?, %C?, %s] " }, /* ** .pp ** This variable describes the format of the `attachment' menu. The ** following printf-style sequences are understood: ** .pp ** .dl ** .dt %C .dd charset ** .dt %c .dd requires charset conversion (n or c) ** .dt %D .dd deleted flag ** .dt %d .dd description ** .dt %e .dd MIME content-transfer-encoding ** .dt %f .dd filename ** .dt %I .dd disposition (I=inline, A=attachment) ** .dt %m .dd major MIME type ** .dt %M .dd MIME subtype ** .dt %n .dd attachment number ** .dt %Q .dd "Q", if MIME part qualifies for attachment counting ** .dt %s .dd size ** .dt %t .dd tagged flag ** .dt %T .dd graphic tree characters ** .dt %u .dd unlink (=to delete) flag ** .dt %X .dd number of qualifying MIME parts in this part and its children ** (please see the ``$attachments'' section for possible speed effects) ** .dt %>X .dd right justify the rest of the string and pad with character "X" ** .dt %|X .dd pad to the end of the line with character "X" ** .dt %*X .dd soft-fill with character "X" as pad ** .de ** .pp ** For an explanation of `soft-fill', see the ``$$index_format'' documentation. */ { "attach_sep", DT_STR, R_NONE, UL &AttachSep, UL "\n" }, /* ** .pp ** The separator to add between attachments when operating (saving, ** printing, piping, etc) on a list of tagged attachments. */ { "attach_split", DT_BOOL, R_NONE, OPTATTACHSPLIT, 1 }, /* ** .pp ** If this variable is unset, when operating (saving, printing, piping, ** etc) on a list of tagged attachments, Mutt will concatenate the ** attachments and will operate on them as a single attachment. The ** ``$$attach_sep'' separator is added after each attachment. When set, ** Mutt will operate on the attachments one by one. */ { "attribution", DT_STR, R_NONE, UL &Attribution, UL "On %d, %n wrote:" }, /* ** .pp ** This is the string that will precede a message which has been included ** in a reply. For a full listing of defined printf()-like sequences see ** the section on ``$$index_format''. */ { "autoedit", DT_BOOL, R_NONE, OPTAUTOEDIT, 0 }, /* ** .pp ** When set along with ``$$edit_headers'', Mutt will skip the initial ** send-menu and allow you to immediately begin editing the body of your ** message. The send-menu may still be accessed once you have finished ** editing the body of your message. ** .pp ** Also see ``$$fast_reply''. */ { "auto_tag", DT_BOOL, R_NONE, OPTAUTOTAG, 0 }, /* ** .pp ** When set, functions in the \fIindex\fP menu which affect a message ** will be applied to all tagged messages (if there are any). When ** unset, you must first use the tag-prefix function (default: ";") to ** make the next function apply to all tagged messages. */ { "beep", DT_BOOL, R_NONE, OPTBEEP, 1 }, /* ** .pp ** When this variable is set, mutt will beep when an error occurs. */ { "beep_new", DT_BOOL, R_NONE, OPTBEEPNEW, 0 }, /* ** .pp ** When this variable is set, mutt will beep whenever it prints a message ** notifying you of new mail. This is independent of the setting of the ** ``$$beep'' variable. */ { "bounce", DT_QUAD, R_NONE, OPT_BOUNCE, M_ASKYES }, /* ** .pp ** Controls whether you will be asked to confirm bouncing messages. ** If set to \fIyes\fP you don't get asked if you want to bounce a ** message. Setting this variable to \fIno\fP is not generally useful, ** and thus not recommended, because you are unable to bounce messages. */ { "bounce_delivered", DT_BOOL, R_NONE, OPTBOUNCEDELIVERED, 1 }, /* ** .pp ** When this variable is set, mutt will include Delivered-To headers when ** bouncing messages. Postfix users may wish to unset this variable. */ { "braille_friendly", DT_BOOL, R_NONE, OPTBRAILLEFRIENDLY, 0 }, /* ** .pp ** When this variable is set, mutt will place the cursor at the beginning ** of the current line in menus, even when the arrow_cursor variable ** is unset, making it easier for blind persons using Braille displays to ** follow these menus. The option is disabled by default because many ** visual terminals don't permit making the cursor invisible. */ { "check_mbox_size", DT_BOOL, R_NONE, OPTCHECKMBOXSIZE, 0 }, /* ** .pp ** When this variable is set, mutt will use file size attribute instead of ** access time when checking for new mail. */ { "charset", DT_STR, R_NONE, UL &Charset, UL 0 }, /* ** .pp ** Character set your terminal uses to display and enter textual data. ** It is also the fallback for $$send_charset. */ { "check_new", DT_BOOL, R_NONE, OPTCHECKNEW, 1 }, /* ** .pp ** \fBNote:\fP this option only affects \fImaildir\fP and \fIMH\fP style ** mailboxes. ** .pp ** When \fIset\fP, Mutt will check for new mail delivered while the ** mailbox is open. Especially with MH mailboxes, this operation can ** take quite some time since it involves scanning the directory and ** checking each file to see if it has already been looked at. If ** \fIcheck_new\fP is \fIunset\fP, no check for new mail is performed ** while the mailbox is open. */ { "collapse_unread", DT_BOOL, R_NONE, OPTCOLLAPSEUNREAD, 1 }, /* ** .pp ** When \fIunset\fP, Mutt will not collapse a thread if it contains any ** unread messages. */ { "uncollapse_jump", DT_BOOL, R_NONE, OPTUNCOLLAPSEJUMP, 0 }, /* ** .pp ** When \fIset\fP, Mutt will jump to the next unread message, if any, ** when the current thread is \fIun\fPcollapsed. */ { "compose_format", DT_STR, R_BOTH, UL &ComposeFormat, UL "-- Mutt: Compose [Approx. msg size: %l Atts: %a]%>-" }, /* ** .pp ** Controls the format of the status line displayed in the \fICompose\fP ** menu. This string is similar to ``$$status_format'', but has its own ** set of printf()-like sequences: ** .pp ** .dl ** .dt %a .dd total number of attachments ** .dt %h .dd local hostname ** .dt %l .dd approximate size (in bytes) of the current message ** .dt %v .dd Mutt version string ** .de ** .pp ** See the text describing the ``$$status_format'' option for more ** information on how to set ``$$compose_format''. */ { "config_charset", DT_STR, R_NONE, UL &ConfigCharset, UL 0 }, /* ** .pp ** When defined, Mutt will recode commands in rc files from this ** encoding. */ { "confirmappend", DT_BOOL, R_NONE, OPTCONFIRMAPPEND, 1 }, /* ** .pp ** When set, Mutt will prompt for confirmation when appending messages to ** an existing mailbox. */ { "confirmcreate", DT_BOOL, R_NONE, OPTCONFIRMCREATE, 1 }, /* ** .pp ** When set, Mutt will prompt for confirmation when saving messages to a ** mailbox which does not yet exist before creating it. */ { "connect_timeout", DT_NUM, R_NONE, UL &ConnectTimeout, 30 }, /* ** .pp ** Causes Mutt to timeout a network connection (for IMAP or POP) after this ** many seconds if the connection is not able to be established. A negative ** value causes Mutt to wait indefinitely for the connection to succeed. */ { "content_type", DT_STR, R_NONE, UL &ContentType, UL "text/plain" }, /* ** .pp ** Sets the default Content-Type for the body of newly composed messages. */ { "copy", DT_QUAD, R_NONE, OPT_COPY, M_YES }, /* ** .pp ** This variable controls whether or not copies of your outgoing messages ** will be saved for later references. Also see ``$$record'', ** ``$$save_name'', ``$$force_name'' and ``$fcc-hook''. */ { "crypt_use_gpgme", DT_BOOL, R_NONE, OPTCRYPTUSEGPGME, 0 }, /* ** .pp ** This variable controls the use of the GPGME-enabled crypto backends. ** If it is set and Mutt was built with gpgme support, the gpgme code for ** S/MIME and PGP will be used instead of the classic code. Note that ** you need to set this option in .muttrc; it won't have any effect when ** used interactively. */ { "crypt_use_pka", DT_BOOL, R_NONE, OPTCRYPTUSEPKA, 0 }, /* ** .pp Controls whether mutt uses PKA ** (http://www.g10code.de/docs/pka-intro.de.pdf) during signature ** verification (only supported by the GPGME backend). */ { "crypt_autopgp", DT_BOOL, R_NONE, OPTCRYPTAUTOPGP, 1 }, /* ** .pp ** This variable controls whether or not mutt may automatically enable ** PGP encryption/signing for messages. See also ``$$crypt_autoencrypt'', ** ``$$crypt_replyencrypt'', ** ``$$crypt_autosign'', ``$$crypt_replysign'' and ``$$smime_is_default''. */ { "crypt_autosmime", DT_BOOL, R_NONE, OPTCRYPTAUTOSMIME, 1 }, /* ** .pp ** This variable controls whether or not mutt may automatically enable ** S/MIME encryption/signing for messages. See also ``$$crypt_autoencrypt'', ** ``$$crypt_replyencrypt'', ** ``$$crypt_autosign'', ``$$crypt_replysign'' and ``$$smime_is_default''. */ { "date_format", DT_STR, R_BOTH, UL &DateFmt, UL "!%a, %b %d, %Y at %I:%M:%S%p %Z" }, /* ** .pp ** This variable controls the format of the date printed by the ``%d'' ** sequence in ``$$index_format''. This is passed to the \fIstrftime\fP ** call to process the date. See the man page for \fIstrftime(3)\fP for ** the proper syntax. ** .pp ** Unless the first character in the string is a bang (``!''), the month ** and week day names are expanded according to the locale specified in ** the variable ``$$locale''. If the first character in the string is a ** bang, the bang is discarded, and the month and week day names in the ** rest of the string are expanded in the \fIC\fP locale (that is in US ** English). */ { "default_hook", DT_STR, R_NONE, UL &DefaultHook, UL "~f %s !~P | (~P ~C %s)" }, /* ** .pp ** This variable controls how message-hooks, reply-hooks, send-hooks, ** send2-hooks, save-hooks, and fcc-hooks will ** be interpreted if they are specified with only a simple regexp, ** instead of a matching pattern. The hooks are expanded when they are ** declared, so a hook will be interpreted according to the value of this ** variable at the time the hook is declared. The default value matches ** if the message is either from a user matching the regular expression ** given, or if it is from you (if the from address matches ** ``alternates'') and is to or cc'ed to a user matching the given ** regular expression. */ { "delete", DT_QUAD, R_NONE, OPT_DELETE, M_ASKYES }, /* ** .pp ** Controls whether or not messages are really deleted when closing or ** synchronizing a mailbox. If set to \fIyes\fP, messages marked for ** deleting will automatically be purged without prompting. If set to ** \fIno\fP, messages marked for deletion will be kept in the mailbox. */ { "delete_untag", DT_BOOL, R_NONE, OPTDELETEUNTAG, 1 }, /* ** .pp ** If this option is \fIset\fP, mutt will untag messages when marking them ** for deletion. This applies when you either explicitly delete a message, ** or when you save it to another folder. */ { "digest_collapse", DT_BOOL, R_NONE, OPTDIGESTCOLLAPSE, 1}, /* ** .pp ** If this option is \fIset\fP, mutt's received-attachments menu will not show the subparts of ** individual messages in a multipart/digest. To see these subparts, press 'v' on that menu. */ { "display_filter", DT_PATH, R_PAGER, UL &DisplayFilter, UL "" }, /* ** .pp ** When set, specifies a command used to filter messages. When a message ** is viewed it is passed as standard input to $$display_filter, and the ** filtered message is read from the standard output. */ #if defined(DL_STANDALONE) && defined(USE_DOTLOCK) { "dotlock_program", DT_PATH, R_NONE, UL &MuttDotlock, UL BINDIR "/mutt_dotlock" }, /* ** .pp ** Contains the path of the mutt_dotlock (8) binary to be used by ** mutt. */ #endif { "dsn_notify", DT_STR, R_NONE, UL &DsnNotify, UL "" }, /* ** .pp ** \fBNote:\fP you should not enable this unless you are using Sendmail ** 8.8.x or greater. ** .pp ** This variable sets the request for when notification is returned. The ** string consists of a comma separated list (no spaces!) of one or more ** of the following: \fInever\fP, to never request notification, ** \fIfailure\fP, to request notification on transmission failure, ** \fIdelay\fP, to be notified of message delays, \fIsuccess\fP, to be ** notified of successful transmission. ** .pp ** Example: set dsn_notify="failure,delay" */ { "dsn_return", DT_STR, R_NONE, UL &DsnReturn, UL "" }, /* ** .pp ** \fBNote:\fP you should not enable this unless you are using Sendmail ** 8.8.x or greater. ** .pp ** This variable controls how much of your message is returned in DSN ** messages. It may be set to either \fIhdrs\fP to return just the ** message header, or \fIfull\fP to return the full message. ** .pp ** Example: set dsn_return=hdrs */ { "duplicate_threads", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, OPTDUPTHREADS, 1 }, /* ** .pp ** This variable controls whether mutt, when sorting by threads, threads ** messages with the same message-id together. If it is set, it will indicate ** that it thinks they are duplicates of each other with an equals sign ** in the thread diagram. */ { "edit_headers", DT_BOOL, R_NONE, OPTEDITHDRS, 0 }, /* ** .pp ** This option allows you to edit the header of your outgoing messages ** along with the body of your message. */ { "edit_hdrs", DT_SYN, R_NONE, UL "edit_headers", 0 }, /* */ { "editor", DT_PATH, R_NONE, UL &Editor, 0 }, /* ** .pp ** This variable specifies which editor is used by mutt. ** It defaults to the value of the VISUAL, or EDITOR, environment ** variable, or to the string "vi" if neither of those are set. */ { "encode_from", DT_BOOL, R_NONE, OPTENCODEFROM, 0 }, /* ** .pp ** When \fIset\fP, mutt will quoted-printable encode messages when ** they contain the string "From " in the beginning of a line. ** Useful to avoid the tampering certain mail delivery and transport ** agents tend to do with messages. */ { "envelope_from_address", DT_ADDR, R_NONE, UL &EnvFrom, 0 }, /* ** .pp ** Manually sets the \fIenvelope\fP sender for outgoing messages. ** This value is ignored if ``$$use_envelope_from'' is unset. */ { "escape", DT_STR, R_NONE, UL &EscChar, UL "~" }, /* ** .pp ** Escape character to use for functions in the builtin editor. */ { "fast_reply", DT_BOOL, R_NONE, OPTFASTREPLY, 0 }, /* ** .pp ** When set, the initial prompt for recipients and subject are skipped ** when replying to messages, and the initial prompt for subject is ** skipped when forwarding messages. ** .pp ** \fBNote:\fP this variable has no effect when the ``$$autoedit'' ** variable is set. */ { "fcc_attach", DT_BOOL, R_NONE, OPTFCCATTACH, 1 }, /* ** .pp ** This variable controls whether or not attachments on outgoing messages ** are saved along with the main body of your message. */ { "fcc_clear", DT_BOOL, R_NONE, OPTFCCCLEAR, 0 }, /* ** .pp ** When this variable is set, FCCs will be stored unencrypted and ** unsigned, even when the actual message is encrypted and/or ** signed. ** (PGP only) */ { "folder", DT_PATH, R_NONE, UL &Maildir, UL "~/Mail" }, /* ** .pp ** Specifies the default location of your mailboxes. A `+' or `=' at the ** beginning of a pathname will be expanded to the value of this ** variable. Note that if you change this variable from the default ** value you need to make sure that the assignment occurs \fIbefore\fP ** you use `+' or `=' for any other variables since expansion takes place ** during the `set' command. */ { "folder_format", DT_STR, R_INDEX, UL &FolderFormat, UL "%2C %t %N %F %2l %-8.8u %-8.8g %8s %d %f" }, /* ** .pp ** This variable allows you to customize the file browser display to your ** personal taste. This string is similar to ``$$index_format'', but has ** its own set of printf()-like sequences: ** .pp ** .dl ** .dt %C .dd current file number ** .dt %d .dd date/time folder was last modified ** .dt %f .dd filename ** .dt %F .dd file permissions ** .dt %g .dd group name (or numeric gid, if missing) ** .dt %l .dd number of hard links ** .dt %N .dd N if folder has new mail, blank otherwise ** .dt %s .dd size in bytes ** .dt %t .dd * if the file is tagged, blank otherwise ** .dt %u .dd owner name (or numeric uid, if missing) ** .dt %>X .dd right justify the rest of the string and pad with character "X" ** .dt %|X .dd pad to the end of the line with character "X" ** .dt %*X .dd soft-fill with character "X" as pad ** .de ** .pp ** For an explanation of `soft-fill', see the ``$$index_format'' documentation. */ { "followup_to", DT_BOOL, R_NONE, OPTFOLLOWUPTO, 1 }, /* ** .pp ** Controls whether or not the \fIMail-Followup-To\fP header field is ** generated when sending mail. When \fIset\fP, Mutt will generate this ** field when you are replying to a known mailing list, specified with ** the ``subscribe'' or ``$lists'' commands. ** .pp ** This field has two purposes. First, preventing you from ** receiving duplicate copies of replies to messages which you send ** to mailing lists, and second, ensuring that you do get a reply ** separately for any messages sent to known lists to which you are ** not subscribed. The header will contain only the list's address ** for subscribed lists, and both the list address and your own ** email address for unsubscribed lists. Without this header, a ** group reply to your message sent to a subscribed list will be ** sent to both the list and your address, resulting in two copies ** of the same email for you. */ { "force_name", DT_BOOL, R_NONE, OPTFORCENAME, 0 }, /* ** .pp ** This variable is similar to ``$$save_name'', except that Mutt will ** store a copy of your outgoing message by the username of the address ** you are sending to even if that mailbox does not exist. ** .pp ** Also see the ``$$record'' variable. */ { "forward_decode", DT_BOOL, R_NONE, OPTFORWDECODE, 1 }, /* ** .pp ** Controls the decoding of complex MIME messages into text/plain when ** forwarding a message. The message header is also RFC2047 decoded. ** This variable is only used, if ``$$mime_forward'' is \fIunset\fP, ** otherwise ``$$mime_forward_decode'' is used instead. */ { "forw_decode", DT_SYN, R_NONE, UL "forward_decode", 0 }, /* */ { "forward_edit", DT_QUAD, R_NONE, OPT_FORWEDIT, M_YES }, /* ** .pp ** This quadoption controls whether or not the user is automatically ** placed in the editor when forwarding messages. For those who always want ** to forward with no modification, use a setting of ``no''. */ { "forward_format", DT_STR, R_NONE, UL &ForwFmt, UL "[%a: %s]" }, /* ** .pp ** This variable controls the default subject when forwarding a message. ** It uses the same format sequences as the ``$$index_format'' variable. */ { "forw_format", DT_SYN, R_NONE, UL "forward_format", 0 }, /* */ { "forward_quote", DT_BOOL, R_NONE, OPTFORWQUOTE, 0 }, /* ** .pp ** When \fIset\fP forwarded messages included in the main body of the ** message (when ``$$mime_forward'' is \fIunset\fP) will be quoted using ** ``$$indent_string''. */ { "forw_quote", DT_SYN, R_NONE, UL "forward_quote", 0 }, /* */ { "from", DT_ADDR, R_NONE, UL &From, UL 0 }, /* ** .pp ** When set, this variable contains a default from address. It ** can be overridden using my_hdr (including from send-hooks) and ** ``$$reverse_name''. This variable is ignored if ``$$use_from'' ** is unset. ** .pp ** Defaults to the contents of the environment variable EMAIL. */ { "gecos_mask", DT_RX, R_NONE, UL &GecosMask, UL "^[^,]*" }, /* ** .pp ** A regular expression used by mutt to parse the GECOS field of a password ** entry when expanding the alias. By default the regular expression is set ** to "^[^,]*" which will return the string up to the first "," encountered. ** If the GECOS field contains a string like "lastname, firstname" then you ** should set the gecos_mask=".*". ** .pp ** This can be useful if you see the following behavior: you address a e-mail ** to user ID stevef whose full name is Steve Franklin. If mutt expands ** stevef to "Franklin" stevef@foo.bar then you should set the gecos_mask to ** a regular expression that will match the whole name so mutt will expand ** "Franklin" to "Franklin, Steve". */ { "hdr_format", DT_SYN, R_NONE, UL "index_format", 0 }, /* */ { "hdrs", DT_BOOL, R_NONE, OPTHDRS, 1 }, /* ** .pp ** When unset, the header fields normally added by the ``$my_hdr'' ** command are not created. This variable \fImust\fP be unset before ** composing a new message or replying in order to take effect. If set, ** the user defined header fields are added to every new message. */ { "header", DT_BOOL, R_NONE, OPTHEADER, 0 }, /* ** .pp ** When set, this variable causes Mutt to include the header ** of the message you are replying to into the edit buffer. ** The ``$$weed'' setting applies. */ { "help", DT_BOOL, R_BOTH, OPTHELP, 1 }, /* ** .pp ** When set, help lines describing the bindings for the major functions ** provided by each menu are displayed on the first line of the screen. ** .pp ** \fBNote:\fP The binding will not be displayed correctly if the ** function is bound to a sequence rather than a single keystroke. Also, ** the help line may not be updated if a binding is changed while Mutt is ** running. Since this variable is primarily aimed at new users, neither ** of these should present a major problem. */ { "hidden_host", DT_BOOL, R_NONE, OPTHIDDENHOST, 0 }, /* ** .pp ** When set, mutt will skip the host name part of ``$$hostname'' variable ** when adding the domain part to addresses. This variable does not ** affect the generation of Message-IDs, and it will not lead to the ** cut-off of first-level domains. */ { "hide_limited", DT_BOOL, R_TREE|R_INDEX, OPTHIDELIMITED, 0 }, /* ** .pp ** When set, mutt will not show the presence of messages that are hidden ** by limiting, in the thread tree. */ { "hide_missing", DT_BOOL, R_TREE|R_INDEX, OPTHIDEMISSING, 1 }, /* ** .pp ** When set, mutt will not show the presence of missing messages in the ** thread tree. */ { "hide_thread_subject", DT_BOOL, R_TREE|R_INDEX, OPTHIDETHREADSUBJECT, 1 }, /* ** .pp ** When set, mutt will not show the subject of messages in the thread ** tree that have the same subject as their parent or closest previously ** displayed sibling. */ { "hide_top_limited", DT_BOOL, R_TREE|R_INDEX, OPTHIDETOPLIMITED, 0 }, /* ** .pp ** When set, mutt will not show the presence of messages that are hidden ** by limiting, at the top of threads in the thread tree. Note that when ** $$hide_limited is set, this option will have no effect. */ { "hide_top_missing", DT_BOOL, R_TREE|R_INDEX, OPTHIDETOPMISSING, 1 }, /* ** .pp ** When set, mutt will not show the presence of missing messages at the ** top of threads in the thread tree. Note that when $$hide_missing is ** set, this option will have no effect. */ { "history", DT_NUM, R_NONE, UL &HistSize, 10 }, /* ** .pp ** This variable controls the size (in number of strings remembered) of ** the string history buffer. The buffer is cleared each time the ** variable is set. */ { "history_file", DT_PATH, R_NONE, UL &HistFile, UL "~/.mutthistory" }, /* ** .pp ** The file in which Mutt will save its history. */ { "honor_followup_to", DT_QUAD, R_NONE, OPT_MFUPTO, M_YES }, /* ** .pp ** This variable controls whether or not a Mail-Followup-To header is ** honored when group-replying to a message. */ { "hostname", DT_STR, R_NONE, UL &Fqdn, 0 }, /* ** .pp ** Specifies the hostname to use after the ``@'' in local e-mail ** addresses. This overrides the compile time definition obtained from ** /etc/resolv.conf. */ { "ignore_linear_white_space", DT_BOOL, R_NONE, OPTIGNORELWS, 0 }, /* ** .pp ** This option replaces linear-white-space between encoded-word ** and *text to a single space to prevent the display of MIME-encoded ** ``Subject'' field from being divided into multiple lines. */ { "ignore_list_reply_to", DT_BOOL, R_NONE, OPTIGNORELISTREPLYTO, 0 }, /* ** .pp ** Affects the behaviour of the \fIreply\fP function when replying to ** messages from mailing lists. When set, if the ``Reply-To:'' field is ** set to the same value as the ``To:'' field, Mutt assumes that the ** ``Reply-To:'' field was set by the mailing list to automate responses ** to the list, and will ignore this field. To direct a response to the ** mailing list when this option is set, use the \fIlist-reply\fP ** function; \fIgroup-reply\fP will reply to both the sender and the ** list. */ #ifdef USE_IMAP { "imap_authenticators", DT_STR, R_NONE, UL &ImapAuthenticators, UL 0 }, /* ** .pp ** This is a colon-delimited list of authentication methods mutt may ** attempt to use to log in to an IMAP server, in the order mutt should ** try them. Authentication methods are either 'login' or the right ** side of an IMAP 'AUTH=xxx' capability string, eg 'digest-md5', 'gssapi' ** or 'cram-md5'. This parameter is case-insensitive. If this ** parameter is \fIunset\fP (the default) mutt will try all available methods, ** in order from most-secure to least-secure. ** .pp ** Example: set imap_authenticators="gssapi:cram-md5:login" ** .pp ** \fBNote:\fP Mutt will only fall back to other authentication methods if ** the previous methods are unavailable. If a method is available but ** authentication fails, mutt will not connect to the IMAP server. */ { "imap_check_subscribed", DT_BOOL, R_NONE, OPTIMAPCHECKSUBSCRIBED, 0 }, /* ** .pp ** When \fIset\fP, mutt will fetch the set of subscribed folders from ** your server on connection, and add them to the set of mailboxes ** it polls for new mail. See also the ``$mailboxes'' command. */ { "imap_delim_chars", DT_STR, R_NONE, UL &ImapDelimChars, UL "/." }, /* ** .pp ** This contains the list of characters which you would like to treat ** as folder separators for displaying IMAP paths. In particular it ** helps in using the '=' shortcut for your \fIfolder\fP variable. */ { "imap_headers", DT_STR, R_INDEX, UL &ImapHeaders, UL 0}, /* ** .pp ** Mutt requests these header fields in addition to the default headers ** ("DATE FROM SUBJECT TO CC MESSAGE-ID REFERENCES CONTENT-TYPE ** CONTENT-DESCRIPTION IN-REPLY-TO REPLY-TO LINES X-LABEL") from IMAP ** servers before displaying the index menu. You may want to add more ** headers for spam detection. \fBNote:\fP This is a space separated list. */ { "imap_idle", DT_BOOL, R_NONE, OPTIMAPIDLE, 0 }, /* ** .pp ** When \fIset\fP, mutt will attempt to use the IMAP IDLE extension ** to check for new mail in the current mailbox. Some servers ** (dovecot was the inspiration for this option) react badly ** to mutt's implementation. If your connection seems to freeze ** up periodically, try unsetting this. */ { "imap_keepalive", DT_NUM, R_NONE, UL &ImapKeepalive, 900 }, /* ** .pp ** This variable specifies the maximum amount of time in seconds that mutt ** will wait before polling open IMAP connections, to prevent the server ** from closing them before mutt has finished with them. The default is ** well within the RFC-specified minimum amount of time (30 minutes) before ** a server is allowed to do this, but in practice the RFC does get ** violated every now and then. Reduce this number if you find yourself ** getting disconnected from your IMAP server due to inactivity. */ { "imap_list_subscribed", DT_BOOL, R_NONE, OPTIMAPLSUB, 0 }, /* ** .pp ** This variable configures whether IMAP folder browsing will look for ** only subscribed folders or all folders. This can be toggled in the ** IMAP browser with the \fItoggle-subscribed\fP function. */ { "imap_login", DT_STR, R_NONE, UL &ImapLogin, UL 0 }, /* ** .pp ** Your login name on the IMAP server. ** .pp ** This variable defaults to the value of \fIimap_user\fP. */ { "imap_pass", DT_STR, R_NONE, UL &ImapPass, UL 0 }, /* ** .pp ** Specifies the password for your IMAP account. If \fIunset\fP, Mutt will ** prompt you for your password when you invoke the fetch-mail function. ** \fBWarning\fP: you should only use this option when you are on a ** fairly secure machine, because the superuser can read your muttrc even ** if you are the only one who can read the file. */ { "imap_passive", DT_BOOL, R_NONE, OPTIMAPPASSIVE, 1 }, /* ** .pp ** When \fIset\fP, mutt will not open new IMAP connections to check for new ** mail. Mutt will only check for new mail over existing IMAP ** connections. This is useful if you don't want to be prompted to ** user/password pairs on mutt invocation, or if opening the connection ** is slow. */ { "imap_peek", DT_BOOL, R_NONE, OPTIMAPPEEK, 1 }, /* ** .pp ** When \fIset\fP, mutt will avoid implicitly marking your mail as read whenever ** you fetch a message from the server. This is generally a good thing, ** but can make closing an IMAP folder somewhat slower. This option ** exists to appease speed freaks. */ { "imap_servernoise", DT_BOOL, R_NONE, OPTIMAPSERVERNOISE, 1 }, /* ** .pp ** When \fIset\fP, mutt will display warning messages from the IMAP ** server as error messages. Since these messages are often ** harmless, or generated due to configuration problems on the ** server which are out of the users' hands, you may wish to suppress ** them at some point. */ { "imap_user", DT_STR, R_NONE, UL &ImapUser, UL 0 }, /* ** .pp ** The name of the user whose mail you intend to access on the IMAP ** server. ** .pp ** This variable defaults to your user name on the local machine. */ #endif { "implicit_autoview", DT_BOOL,R_NONE, OPTIMPLICITAUTOVIEW, 0}, /* ** .pp ** If set to ``yes'', mutt will look for a mailcap entry with the ** copiousoutput flag set for \fIevery\fP MIME attachment it doesn't have ** an internal viewer defined for. If such an entry is found, mutt will ** use the viewer defined in that entry to convert the body part to text ** form. */ { "include", DT_QUAD, R_NONE, OPT_INCLUDE, M_ASKYES }, /* ** .pp ** Controls whether or not a copy of the message(s) you are replying to ** is included in your reply. */ { "include_onlyfirst", DT_BOOL, R_NONE, OPTINCLUDEONLYFIRST, 0}, /* ** .pp ** Controls whether or not Mutt includes only the first attachment ** of the message you are replying. */ { "indent_string", DT_STR, R_NONE, UL &Prefix, UL "> " }, /* ** .pp ** Specifies the string to prepend to each line of text quoted in a ** message to which you are replying. You are strongly encouraged not to ** change this value, as it tends to agitate the more fanatical netizens. ** .pp ** This option is a format string, please see the description of ** ``$$index_format'' for supported printf()-style sequences. */ { "indent_str", DT_SYN, R_NONE, UL "indent_string", 0 }, /* */ { "index_format", DT_STR, R_BOTH, UL &HdrFmt, UL "%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?) %s" }, /* ** .pp ** This variable allows you to customize the message index display to ** your personal taste. ** .pp ** ``Format strings'' are similar to the strings used in the ``C'' ** function printf to format output (see the man page for more detail). ** The following sequences are defined in Mutt: ** .pp ** .dl ** .dt %a .dd address of the author ** .dt %A .dd reply-to address (if present; otherwise: address of author) ** .dt %b .dd filename of the original message folder (think mailBox) ** .dt %B .dd the list to which the letter was sent, or else the folder name (%b). ** .dt %c .dd number of characters (bytes) in the message ** .dt %C .dd current message number ** .dt %d .dd date and time of the message in the format specified by ** ``date_format'' converted to sender's time zone ** .dt %D .dd date and time of the message in the format specified by ** ``date_format'' converted to the local time zone ** .dt %e .dd current message number in thread ** .dt %E .dd number of messages in current thread ** .dt %f .dd entire From: line (address + real name) ** .dt %F .dd author name, or recipient name if the message is from you ** .dt %H .dd spam attribute(s) of this message ** .dt %i .dd message-id of the current message ** .dt %l .dd number of lines in the message (does not work with maildir, ** mh, and possibly IMAP folders) ** .dt %L .dd If an address in the To or CC header field matches an address ** defined by the users ``subscribe'' command, this displays ** "To ", otherwise the same as %F. ** .dt %m .dd total number of message in the mailbox ** .dt %M .dd number of hidden messages if the thread is collapsed. ** .dt %N .dd message score ** .dt %n .dd author's real name (or address if missing) ** .dt %O .dd (_O_riginal save folder) Where mutt would formerly have ** stashed the message: list name or recipient name if no list ** .dt %P .dd progress indicator for the builtin pager (how much of the file has been displayed) ** .dt %s .dd subject of the message ** .dt %S .dd status of the message (N/D/d/!/r/\(as) ** .dt %t .dd `to:' field (recipients) ** .dt %T .dd the appropriate character from the $$to_chars string ** .dt %u .dd user (login) name of the author ** .dt %v .dd first name of the author, or the recipient if the message is from you ** .dt %X .dd number of attachments ** (please see the ``$attachments'' section for possible speed effects) ** .dt %y .dd `x-label:' field, if present ** .dt %Y .dd `x-label' field, if present, and (1) not at part of a thread tree, ** (2) at the top of a thread, or (3) `x-label' is different from ** preceding message's `x-label'. ** .dt %Z .dd message status flags ** .dt %{fmt} .dd the date and time of the message is converted to sender's ** time zone, and ``fmt'' is expanded by the library function ** ``strftime''; a leading bang disables locales ** .dt %[fmt] .dd the date and time of the message is converted to the local ** time zone, and ``fmt'' is expanded by the library function ** ``strftime''; a leading bang disables locales ** .dt %(fmt) .dd the local date and time when the message was received. ** ``fmt'' is expanded by the library function ``strftime''; ** a leading bang disables locales ** .dt % .dd the current local time. ``fmt'' is expanded by the library ** function ``strftime''; a leading bang disables locales. ** .dt %>X .dd right justify the rest of the string and pad with character "X" ** .dt %|X .dd pad to the end of the line with character "X" ** .dt %*X .dd soft-fill with character "X" as pad ** .de ** .pp ** `Soft-fill' deserves some explanation. Normal right-justification ** will print everything to the left of the %>, displaying padding and ** the whatever lies to the right only if there's room. By contrast, ** soft-fill gives priority to the right-hand side, guaranteeing space ** to display it and showing padding only if there's still room. If ** necessary, soft-fill will eat text leftwards to make room for ** rightward text. ** .pp ** See also: ``$$to_chars''. */ { "ispell", DT_PATH, R_NONE, UL &Ispell, UL ISPELL }, /* ** .pp ** How to invoke ispell (GNU's spell-checking software). */ { "keep_flagged", DT_BOOL, R_NONE, OPTKEEPFLAGGED, 0 }, /* ** .pp ** If set, read messages marked as flagged will not be moved ** from your spool mailbox to your ``$$mbox'' mailbox, or as a result of ** a ``$mbox-hook'' command. */ { "locale", DT_STR, R_BOTH, UL &Locale, UL "C" }, /* ** .pp ** The locale used by \fIstrftime(3)\fP to format dates. Legal values are ** the strings your system accepts for the locale variable \fILC_TIME\fP. */ { "mail_check", DT_NUM, R_NONE, UL &BuffyTimeout, 5 }, /* ** .pp ** This variable configures how often (in seconds) mutt should look for ** new mail. */ { "mailcap_path", DT_STR, R_NONE, UL &MailcapPath, 0 }, /* ** .pp ** This variable specifies which files to consult when attempting to ** display MIME bodies not directly supported by Mutt. */ { "mailcap_sanitize", DT_BOOL, R_NONE, OPTMAILCAPSANITIZE, 1 }, /* ** .pp ** If set, mutt will restrict possible characters in mailcap % expandos ** to a well-defined set of safe characters. This is the safe setting, ** but we are not sure it doesn't break some more advanced MIME stuff. ** .pp ** \fBDON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE ** DOING!\fP */ #ifdef USE_HCACHE { "header_cache", DT_PATH, R_NONE, UL &HeaderCache, 0 }, /* ** .pp ** The header_cache variable points to the header cache database. ** If header_cache points to a directory it will contain a header cache ** database per folder. If header_cache points to a file that file will ** be a single global header cache. By default it is unset so no header ** caching will be used. */ { "maildir_header_cache_verify", DT_BOOL, R_NONE, OPTHCACHEVERIFY, 1 }, /* ** .pp ** Check for Maildir unaware programs other than mutt having modified maildir ** files when the header cache is in use. This incurs one stat(2) per ** message every time the folder is opened. */ #if defined(HAVE_GDBM) || defined(HAVE_DB4) { "header_cache_pagesize", DT_STR, R_NONE, UL &HeaderCachePageSize, UL "16384" }, /* ** .pp ** When mutt is compiled with either gdbm or bdb4 as the header cache backend, ** this option changes the database page size. Too large or too small ** values can waste space, memory, or CPU time. The default should be more ** or less optimal for most use cases. */ #endif /* HAVE_GDBM || HAVE_DB4 */ #if defined(HAVE_QDBM) { "header_cache_compress", DT_BOOL, R_NONE, OPTHCACHECOMPRESS, 1 }, /* ** .pp ** When mutt is compiled with qdbm as header cache backend, ** this option determines whether the database will be compressed. ** Compression results in database files roughly being one fifth ** of the usual diskspace, but the uncompression can result in a ** slower opening of cached folder(s). */ #endif /* HAVE_QDBM */ #endif /* USE_HCACHE */ { "maildir_trash", DT_BOOL, R_NONE, OPTMAILDIRTRASH, 0 }, /* ** .pp ** If set, messages marked as deleted will be saved with the maildir ** (T)rashed flag instead of unlinked. \fBNOTE:\fP this only applies ** to maildir-style mailboxes. Setting it will have no effect on other ** mailbox types. */ { "mark_old", DT_BOOL, R_BOTH, OPTMARKOLD, 1 }, /* ** .pp ** Controls whether or not mutt marks \fInew\fP \fBunread\fP ** messages as \fIold\fP if you exit a mailbox without reading them. ** With this option set, the next time you start mutt, the messages ** will show up with an "O" next to them in the index menu, ** indicating that they are old. */ { "markers", DT_BOOL, R_PAGER, OPTMARKERS, 1 }, /* ** .pp ** Controls the display of wrapped lines in the internal pager. If set, a ** ``+'' marker is displayed at the beginning of wrapped lines. Also see ** the ``$$smart_wrap'' variable. */ { "mask", DT_RX, R_NONE, UL &Mask, UL "!^\\.[^.]" }, /* ** .pp ** A regular expression used in the file browser, optionally preceded by ** the \fInot\fP operator ``!''. Only files whose names match this mask ** will be shown. The match is always case-sensitive. */ { "mbox", DT_PATH, R_BOTH, UL &Inbox, UL "~/mbox" }, /* ** .pp ** This specifies the folder into which read mail in your ``$$spoolfile'' ** folder will be appended. */ { "mbox_type", DT_MAGIC,R_NONE, UL &DefaultMagic, M_MBOX }, /* ** .pp ** The default mailbox type used when creating new folders. May be any of ** mbox, MMDF, MH and Maildir. */ { "metoo", DT_BOOL, R_NONE, OPTMETOO, 0 }, /* ** .pp ** If unset, Mutt will remove your address (see the ``alternates'' ** command) from the list of recipients when replying to a message. */ { "menu_context", DT_NUM, R_NONE, UL &MenuContext, 0 }, /* ** .pp ** This variable controls the number of lines of context that are given ** when scrolling through menus. (Similar to ``$$pager_context''.) */ { "menu_move_off", DT_BOOL, R_NONE, OPTMENUMOVEOFF, 1 }, /* ** .pp ** When \fIunset\fP, the bottom entry of menus will never scroll up past ** the bottom of the screen, unless there are less entries than lines. ** When \fIset\fP, the bottom entry may move off the bottom. */ { "menu_scroll", DT_BOOL, R_NONE, OPTMENUSCROLL, 0 }, /* ** .pp ** When \fIset\fP, menus will be scrolled up or down one line when you ** attempt to move across a screen boundary. If \fIunset\fP, the screen ** is cleared and the next or previous page of the menu is displayed ** (useful for slow links to avoid many redraws). */ { "meta_key", DT_BOOL, R_NONE, OPTMETAKEY, 0 }, /* ** .pp ** If set, forces Mutt to interpret keystrokes with the high bit (bit 8) ** set as if the user had pressed the ESC key and whatever key remains ** after having the high bit removed. For example, if the key pressed ** has an ASCII value of 0xf8, then this is treated as if the user had ** pressed ESC then ``x''. This is because the result of removing the ** high bit from ``0xf8'' is ``0x78'', which is the ASCII character ** ``x''. */ { "mh_purge", DT_BOOL, R_NONE, OPTMHPURGE, 0 }, /* ** .pp ** When unset, mutt will mimic mh's behaviour and rename deleted messages ** to \fI,\fP in mh folders instead of really deleting ** them. If the variable is set, the message files will simply be ** deleted. */ { "mh_seq_flagged", DT_STR, R_NONE, UL &MhFlagged, UL "flagged" }, /* ** .pp ** The name of the MH sequence used for flagged messages. */ { "mh_seq_replied", DT_STR, R_NONE, UL &MhReplied, UL "replied" }, /* ** .pp ** The name of the MH sequence used to tag replied messages. */ { "mh_seq_unseen", DT_STR, R_NONE, UL &MhUnseen, UL "unseen" }, /* ** .pp ** The name of the MH sequence used for unseen messages. */ { "mime_forward", DT_QUAD, R_NONE, OPT_MIMEFWD, M_NO }, /* ** .pp ** When set, the message you are forwarding will be attached as a ** separate MIME part instead of included in the main body of the ** message. This is useful for forwarding MIME messages so the receiver ** can properly view the message as it was delivered to you. If you like ** to switch between MIME and not MIME from mail to mail, set this ** variable to ask-no or ask-yes. ** .pp ** Also see ``$$forward_decode'' and ``$$mime_forward_decode''. */ { "mime_forward_decode", DT_BOOL, R_NONE, OPTMIMEFORWDECODE, 0 }, /* ** .pp ** Controls the decoding of complex MIME messages into text/plain when ** forwarding a message while ``$$mime_forward'' is \fIset\fP. Otherwise ** ``$$forward_decode'' is used instead. */ { "mime_fwd", DT_SYN, R_NONE, UL "mime_forward", 0 }, /* */ { "mime_forward_rest", DT_QUAD, R_NONE, OPT_MIMEFWDREST, M_YES }, /* ** .pp ** When forwarding multiple attachments of a MIME message from the recvattach ** menu, attachments which cannot be decoded in a reasonable manner will ** be attached to the newly composed message if this option is set. */ #ifdef MIXMASTER { "mix_entry_format", DT_STR, R_NONE, UL &MixEntryFormat, UL "%4n %c %-16s %a" }, /* ** .pp ** This variable describes the format of a remailer line on the mixmaster ** chain selection screen. The following printf-like sequences are ** supported: ** .pp ** .dl ** .dt %n .dd The running number on the menu. ** .dt %c .dd Remailer capabilities. ** .dt %s .dd The remailer's short name. ** .dt %a .dd The remailer's e-mail address. ** .de */ { "mixmaster", DT_PATH, R_NONE, UL &Mixmaster, UL MIXMASTER }, /* ** .pp ** This variable contains the path to the Mixmaster binary on your ** system. It is used with various sets of parameters to gather the ** list of known remailers, and to finally send a message through the ** mixmaster chain. */ #endif { "move", DT_QUAD, R_NONE, OPT_MOVE, M_ASKNO }, /* ** .pp ** Controls whether or not Mutt will move read messages ** from your spool mailbox to your ``$$mbox'' mailbox, or as a result of ** a ``$mbox-hook'' command. */ #if defined(USE_IMAP) || defined(USE_POP) { "message_cachedir", DT_PATH, R_NONE, UL &MessageCachedir, 0 }, /* ** .pp ** Set this to a directory and mutt will cache copies of messages from ** your IMAP and POP servers here. You are free to remove entries at any ** time, for instance if stale entries accumulate because you have ** deleted messages with another mail client. */ { "message_cache_clean", DT_BOOL, R_NONE, OPTMESSAGECACHECLEAN, 0 }, /* ** .pp ** If set, mutt will clean out obsolete entries from the cache when ** the mailbox is synchronized. You probably only want to set it ** every once in a while, since it can be a little slow. */ #endif { "message_format", DT_STR, R_NONE, UL &MsgFmt, UL "%s" }, /* ** .pp ** This is the string displayed in the ``attachment'' menu for ** attachments of type message/rfc822. For a full listing of defined ** printf()-like sequences see the section on ``$$index_format''. */ { "msg_format", DT_SYN, R_NONE, UL "message_format", 0 }, /* */ { "narrow_tree", DT_BOOL, R_TREE|R_INDEX, OPTNARROWTREE, 0 }, /* ** .pp ** This variable, when set, makes the thread tree narrower, allowing ** deeper threads to fit on the screen. */ #ifdef USE_SOCKET { "net_inc", DT_NUM, R_NONE, UL &NetInc, 10 }, /* ** .pp ** Operations that expect to transfer a large amount of data over the ** network will update their progress every \fInet_inc\fP kilobytes. ** If set to 0, no progress messages will be displayed. ** .pp ** See also ``$$read_inc'' and ``$$write_inc''. */ #endif { "pager", DT_PATH, R_NONE, UL &Pager, UL "builtin" }, /* ** .pp ** This variable specifies which pager you would like to use to view ** messages. builtin means to use the builtin pager, otherwise this ** variable should specify the pathname of the external pager you would ** like to use. ** .pp ** Using an external pager may have some disadvantages: Additional ** keystrokes are necessary because you can't call mutt functions ** directly from the pager, and screen resizes cause lines longer than ** the screen width to be badly formatted in the help menu. */ { "pager_context", DT_NUM, R_NONE, UL &PagerContext, 0 }, /* ** .pp ** This variable controls the number of lines of context that are given ** when displaying the next or previous page in the internal pager. By ** default, Mutt will display the line after the last one on the screen ** at the top of the next page (0 lines of context). */ { "pager_format", DT_STR, R_PAGER, UL &PagerFmt, UL "-%Z- %C/%m: %-20.20n %s%* -- (%P)" }, /* ** .pp ** This variable controls the format of the one-line message ``status'' ** displayed before each message in either the internal or an external ** pager. The valid sequences are listed in the ``$$index_format'' ** section. */ { "pager_index_lines",DT_NUM, R_PAGER, UL &PagerIndexLines, 0 }, /* ** .pp ** Determines the number of lines of a mini-index which is shown when in ** the pager. The current message, unless near the top or bottom of the ** folder, will be roughly one third of the way down this mini-index, ** giving the reader the context of a few messages before and after the ** message. This is useful, for example, to determine how many messages ** remain to be read in the current thread. One of the lines is reserved ** for the status bar from the index, so a \fIpager_index_lines\fP of 6 ** will only show 5 lines of the actual index. A value of 0 results in ** no index being shown. If the number of messages in the current folder ** is less than \fIpager_index_lines\fP, then the index will only use as ** many lines as it needs. */ { "pager_stop", DT_BOOL, R_NONE, OPTPAGERSTOP, 0 }, /* ** .pp ** When set, the internal-pager will \fBnot\fP move to the next message ** when you are at the end of a message and invoke the \fInext-page\fP ** function. */ { "pgp_autosign", DT_SYN, R_NONE, UL "crypt_autosign", 0 }, { "crypt_autosign", DT_BOOL, R_NONE, OPTCRYPTAUTOSIGN, 0 }, /* ** .pp ** Setting this variable will cause Mutt to always attempt to ** cryptographically sign outgoing messages. This can be overridden ** by use of the \fIpgp-menu\fP, when signing is not required or ** encryption is requested as well. If ``$$smime_is_default'' is set, ** then OpenSSL is used instead to create S/MIME messages and settings can ** be overridden by use of the \fIsmime-menu\fP. ** (Crypto only) */ { "pgp_autoencrypt", DT_SYN, R_NONE, UL "crypt_autoencrypt", 0 }, { "crypt_autoencrypt", DT_BOOL, R_NONE, OPTCRYPTAUTOENCRYPT, 0 }, /* ** .pp ** Setting this variable will cause Mutt to always attempt to PGP ** encrypt outgoing messages. This is probably only useful in ** connection to the \fIsend-hook\fP command. It can be overridden ** by use of the \fIpgp-menu\fP, when encryption is not required or ** signing is requested as well. IF ``$$smime_is_default'' is set, ** then OpenSSL is used instead to create S/MIME messages and ** settings can be overridden by use of the \fIsmime-menu\fP. ** (Crypto only) */ { "pgp_ignore_subkeys", DT_BOOL, R_NONE, OPTPGPIGNORESUB, 1}, /* ** .pp ** Setting this variable will cause Mutt to ignore OpenPGP subkeys. Instead, ** the principal key will inherit the subkeys' capabilities. Unset this ** if you want to play interesting key selection games. ** (PGP only) */ { "pgp_replyencrypt", DT_SYN, R_NONE, UL "crypt_replyencrypt", 1 }, { "crypt_replyencrypt", DT_BOOL, R_NONE, OPTCRYPTREPLYENCRYPT, 1 }, /* ** .pp ** If set, automatically PGP or OpenSSL encrypt replies to messages which are ** encrypted. ** (Crypto only) */ { "pgp_replysign", DT_SYN, R_NONE, UL "crypt_replysign", 0 }, { "crypt_replysign", DT_BOOL, R_NONE, OPTCRYPTREPLYSIGN, 0 }, /* ** .pp ** If set, automatically PGP or OpenSSL sign replies to messages which are ** signed. ** .pp ** \fBNote:\fP this does not work on messages that are encrypted ** \fBand\fP signed! ** (Crypto only) */ { "pgp_replysignencrypted", DT_SYN, R_NONE, UL "crypt_replysignencrypted", 0}, { "crypt_replysignencrypted", DT_BOOL, R_NONE, OPTCRYPTREPLYSIGNENCRYPTED, 0 }, /* ** .pp ** If set, automatically PGP or OpenSSL sign replies to messages ** which are encrypted. This makes sense in combination with ** ``$$crypt_replyencrypt'', because it allows you to sign all ** messages which are automatically encrypted. This works around ** the problem noted in ``$$crypt_replysign'', that mutt is not able ** to find out whether an encrypted message is also signed. ** (Crypto only) */ { "crypt_timestamp", DT_BOOL, R_NONE, OPTCRYPTTIMESTAMP, 1 }, /* ** .pp ** If set, mutt will include a time stamp in the lines surrounding ** PGP or S/MIME output, so spoofing such lines is more difficult. ** If you are using colors to mark these lines, and rely on these, ** you may unset this setting. ** (Crypto only) */ { "pgp_use_gpg_agent", DT_BOOL, R_NONE, OPTUSEGPGAGENT, 0}, /* ** .pp ** If set, mutt will use a possibly-running gpg-agent process. ** (PGP only) */ { "pgp_verify_sig", DT_SYN, R_NONE, UL "crypt_verify_sig", 0}, { "crypt_verify_sig", DT_QUAD, R_NONE, OPT_VERIFYSIG, M_YES }, /* ** .pp ** If ``yes'', always attempt to verify PGP or S/MIME signatures. ** If ``ask'', ask whether or not to verify the signature. ** If ``no'', never attempt to verify cryptographic signatures. ** (Crypto only) */ { "smime_is_default", DT_BOOL, R_NONE, OPTSMIMEISDEFAULT, 0}, /* ** .pp ** The default behaviour of mutt is to use PGP on all auto-sign/encryption ** operations. To override and to use OpenSSL instead this must be set. ** However, this has no effect while replying, since mutt will automatically ** select the same application that was used to sign/encrypt the original ** message. (Note that this variable can be overridden by unsetting $$crypt_autosmime.) ** (S/MIME only) */ { "smime_ask_cert_label", DT_BOOL, R_NONE, OPTASKCERTLABEL, 1 }, /* ** .pp ** This flag controls whether you want to be asked to enter a label ** for a certificate about to be added to the database or not. It is ** set by default. ** (S/MIME only) */ { "smime_decrypt_use_default_key", DT_BOOL, R_NONE, OPTSDEFAULTDECRYPTKEY, 1 }, /* ** .pp ** If set (default) this tells mutt to use the default key for decryption. Otherwise, ** if manage multiple certificate-key-pairs, mutt will try to use the mailbox-address ** to determine the key to use. It will ask you to supply a key, if it can't find one. ** (S/MIME only) */ { "pgp_entry_format", DT_STR, R_NONE, UL &PgpEntryFormat, UL "%4n %t%f %4l/0x%k %-4a %2c %u" }, /* ** .pp ** This variable allows you to customize the PGP key selection menu to ** your personal taste. This string is similar to ``$$index_format'', but ** has its own set of printf()-like sequences: ** .pp ** .dl ** .dt %n .dd number ** .dt %k .dd key id ** .dt %u .dd user id ** .dt %a .dd algorithm ** .dt %l .dd key length ** .dt %f .dd flags ** .dt %c .dd capabilities ** .dt %t .dd trust/validity of the key-uid association ** .dt %[] .dd date of the key where is an strftime(3) expression ** .de ** .pp ** (PGP only) */ { "pgp_good_sign", DT_RX, R_NONE, UL &PgpGoodSign, 0 }, /* ** .pp ** If you assign a text to this variable, then a PGP signature is only ** considered verified if the output from $$pgp_verify_command contains ** the text. Use this variable if the exit code from the command is 0 ** even for bad signatures. ** (PGP only) */ { "pgp_check_exit", DT_BOOL, R_NONE, OPTPGPCHECKEXIT, 1 }, /* ** .pp ** If set, mutt will check the exit code of the PGP subprocess when ** signing or encrypting. A non-zero exit code means that the ** subprocess failed. ** (PGP only) */ { "pgp_long_ids", DT_BOOL, R_NONE, OPTPGPLONGIDS, 0 }, /* ** .pp ** If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs. ** (PGP only) */ { "pgp_retainable_sigs", DT_BOOL, R_NONE, OPTPGPRETAINABLESIG, 0 }, /* ** .pp ** If set, signed and encrypted messages will consist of nested ** multipart/signed and multipart/encrypted body parts. ** .pp ** This is useful for applications like encrypted and signed mailing ** lists, where the outer layer (multipart/encrypted) can be easily ** removed, while the inner multipart/signed part is retained. ** (PGP only) */ { "pgp_create_traditional", DT_SYN, R_NONE, UL "pgp_autoinline", 0 }, { "pgp_autoinline", DT_BOOL, R_NONE, OPTPGPAUTOINLINE, 0 }, /* ** .pp ** This option controls whether Mutt generates old-style inline ** (traditional) PGP encrypted or signed messages under certain ** circumstances. This can be overridden by use of the \fIpgp-menu\fP, ** when inline is not required. ** .pp ** Note that Mutt might automatically use PGP/MIME for messages ** which consist of more than a single MIME part. Mutt can be ** configured to ask before sending PGP/MIME messages when inline ** (traditional) would not work. ** See also: ``$$pgp_mime_auto''. ** .pp ** Also note that using the old-style PGP message format is \fBstrongly\fP ** \fBdeprecated\fP. ** (PGP only) */ { "pgp_auto_traditional", DT_SYN, R_NONE, UL "pgp_replyinline", 0 }, { "pgp_replyinline", DT_BOOL, R_NONE, OPTPGPREPLYINLINE, 0 }, /* ** .pp ** Setting this variable will cause Mutt to always attempt to ** create an inline (traditional) message when replying to a ** message which is PGP encrypted/signed inline. This can be ** overridden by use of the \fIpgp-menu\fP, when inline is not ** required. This option does not automatically detect if the ** (replied-to) message is inline; instead it relies on Mutt ** internals for previously checked/flagged messages. ** .pp ** Note that Mutt might automatically use PGP/MIME for messages ** which consist of more than a single MIME part. Mutt can be ** configured to ask before sending PGP/MIME messages when inline ** (traditional) would not work. ** See also: ``$$pgp_mime_auto''. ** .pp ** Also note that using the old-style PGP message format is \fBstrongly\fP ** \fBdeprecated\fP. ** (PGP only) ** */ { "pgp_show_unusable", DT_BOOL, R_NONE, OPTPGPSHOWUNUSABLE, 1 }, /* ** .pp ** If set, mutt will display non-usable keys on the PGP key selection ** menu. This includes keys which have been revoked, have expired, or ** have been marked as ``disabled'' by the user. ** (PGP only) */ { "pgp_sign_as", DT_STR, R_NONE, UL &PgpSignAs, 0 }, /* ** .pp ** If you have more than one key pair, this option allows you to specify ** which of your private keys to use. It is recommended that you use the ** keyid form to specify your key (e.g., ``0x00112233''). ** (PGP only) */ { "pgp_strict_enc", DT_BOOL, R_NONE, OPTPGPSTRICTENC, 1 }, /* ** .pp ** If set, Mutt will automatically encode PGP/MIME signed messages as ** \fIquoted-printable\fP. Please note that unsetting this variable may ** lead to problems with non-verifyable PGP signatures, so only change ** this if you know what you are doing. ** (PGP only) */ { "pgp_timeout", DT_NUM, R_NONE, UL &PgpTimeout, 300 }, /* ** .pp ** The number of seconds after which a cached passphrase will expire if ** not used. ** (PGP only) */ { "pgp_sort_keys", DT_SORT|DT_SORT_KEYS, R_NONE, UL &PgpSortKeys, SORT_ADDRESS }, /* ** .pp ** Specifies how the entries in the `pgp keys' menu are sorted. The ** following are legal values: ** .pp ** .dl ** .dt address .dd sort alphabetically by user id ** .dt keyid .dd sort alphabetically by key id ** .dt date .dd sort by key creation date ** .dt trust .dd sort by the trust of the key ** .de ** .pp ** If you prefer reverse order of the above values, prefix it with ** `reverse-'. ** (PGP only) */ { "pgp_mime_auto", DT_QUAD, R_NONE, OPT_PGPMIMEAUTO, M_ASKYES }, /* ** .pp ** This option controls whether Mutt will prompt you for ** automatically sending a (signed/encrypted) message using ** PGP/MIME when inline (traditional) fails (for any reason). ** .pp ** Also note that using the old-style PGP message format is \fBstrongly\fP ** \fBdeprecated\fP. ** (PGP only) */ { "pgp_auto_decode", DT_BOOL, R_NONE, OPTPGPAUTODEC, 0 }, /* ** .pp ** If set, mutt will automatically attempt to decrypt traditional PGP ** messages whenever the user performs an operation which ordinarily would ** result in the contents of the message being operated on. For example, ** if the user displays a pgp-traditional message which has not been manually ** checked with the check-traditional-pgp function, mutt will automatically ** check the message for traditional pgp. */ /* XXX Default values! */ { "pgp_decode_command", DT_STR, R_NONE, UL &PgpDecodeCommand, 0}, /* ** .pp ** This format strings specifies a command which is used to decode ** application/pgp attachments. ** .pp ** The PGP command formats have their own set of printf-like sequences: ** .pp ** .dl ** .dt %p .dd Expands to PGPPASSFD=0 when a pass phrase is needed, to an empty ** string otherwise. Note: This may be used with a %? construct. ** .dt %f .dd Expands to the name of a file containing a message. ** .dt %s .dd Expands to the name of a file containing the signature part ** . of a multipart/signed attachment when verifying it. ** .dt %a .dd The value of $$pgp_sign_as. ** .dt %r .dd One or more key IDs. ** .de ** .pp ** For examples on how to configure these formats for the various versions ** of PGP which are floating around, see the pgp*.rc and gpg.rc files in ** the samples/ subdirectory which has been installed on your system ** alongside the documentation. ** (PGP only) */ { "pgp_getkeys_command", DT_STR, R_NONE, UL &PgpGetkeysCommand, 0}, /* ** .pp ** This command is invoked whenever mutt will need public key information. ** %r is the only printf-like sequence used with this format. ** (PGP only) */ { "pgp_verify_command", DT_STR, R_NONE, UL &PgpVerifyCommand, 0}, /* ** .pp ** This command is used to verify PGP signatures. ** (PGP only) */ { "pgp_decrypt_command", DT_STR, R_NONE, UL &PgpDecryptCommand, 0}, /* ** .pp ** This command is used to decrypt a PGP encrypted message. ** (PGP only) */ { "pgp_clearsign_command", DT_STR, R_NONE, UL &PgpClearSignCommand, 0 }, /* ** .pp ** This format is used to create a old-style "clearsigned" PGP ** message. Note that the use of this format is \fBstrongly\fP ** \fBdeprecated\fP. ** (PGP only) */ { "pgp_sign_command", DT_STR, R_NONE, UL &PgpSignCommand, 0}, /* ** .pp ** This command is used to create the detached PGP signature for a ** multipart/signed PGP/MIME body part. ** (PGP only) */ { "pgp_encrypt_sign_command", DT_STR, R_NONE, UL &PgpEncryptSignCommand, 0}, /* ** .pp ** This command is used to both sign and encrypt a body part. ** (PGP only) */ { "pgp_encrypt_only_command", DT_STR, R_NONE, UL &PgpEncryptOnlyCommand, 0}, /* ** .pp ** This command is used to encrypt a body part without signing it. ** (PGP only) */ { "pgp_import_command", DT_STR, R_NONE, UL &PgpImportCommand, 0}, /* ** .pp ** This command is used to import a key from a message into ** the user's public key ring. ** (PGP only) */ { "pgp_export_command", DT_STR, R_NONE, UL &PgpExportCommand, 0}, /* ** .pp ** This command is used to export a public key from the user's ** key ring. ** (PGP only) */ { "pgp_verify_key_command", DT_STR, R_NONE, UL &PgpVerifyKeyCommand, 0}, /* ** .pp ** This command is used to verify key information from the key selection ** menu. ** (PGP only) */ { "pgp_list_secring_command", DT_STR, R_NONE, UL &PgpListSecringCommand, 0}, /* ** .pp ** This command is used to list the secret key ring's contents. The ** output format must be analogous to the one used by ** gpg --list-keys --with-colons. ** .pp ** This format is also generated by the pgpring utility which comes ** with mutt. ** (PGP only) */ { "pgp_list_pubring_command", DT_STR, R_NONE, UL &PgpListPubringCommand, 0}, /* ** .pp ** This command is used to list the public key ring's contents. The ** output format must be analogous to the one used by ** gpg --list-keys --with-colons. ** .pp ** This format is also generated by the pgpring utility which comes ** with mutt. ** (PGP only) */ { "forward_decrypt", DT_BOOL, R_NONE, OPTFORWDECRYPT, 1 }, /* ** .pp ** Controls the handling of encrypted messages when forwarding a message. ** When set, the outer layer of encryption is stripped off. This ** variable is only used if ``$$mime_forward'' is \fIset\fP and ** ``$$mime_forward_decode'' is \fIunset\fP. ** (PGP only) */ { "forw_decrypt", DT_SYN, R_NONE, UL "forward_decrypt", 0 }, /* */ { "smime_timeout", DT_NUM, R_NONE, UL &SmimeTimeout, 300 }, /* ** .pp ** The number of seconds after which a cached passphrase will expire if ** not used. ** (S/MIME only) */ { "smime_encrypt_with", DT_STR, R_NONE, UL &SmimeCryptAlg, 0 }, /* ** .pp ** This sets the algorithm that should be used for encryption. ** Valid choices are "des", "des3", "rc2-40", "rc2-64", "rc2-128". ** If unset "3des" (TripleDES) is used. ** (S/MIME only) */ { "smime_keys", DT_PATH, R_NONE, UL &SmimeKeys, 0 }, /* ** .pp ** Since there is no pubring/secring as with PGP, mutt has to handle ** storage ad retrieval of keys/certs by itself. This is very basic right now, ** and stores keys and certificates in two different directories, both ** named as the hash-value retrieved from OpenSSL. There is an index file ** which contains mailbox-address keyid pair, and which can be manually ** edited. This one points to the location of the private keys. ** (S/MIME only) */ { "smime_ca_location", DT_PATH, R_NONE, UL &SmimeCALocation, 0 }, /* ** .pp ** This variable contains the name of either a directory, or a file which ** contains trusted certificates for use with OpenSSL. ** (S/MIME only) */ { "smime_certificates", DT_PATH, R_NONE, UL &SmimeCertificates, 0 }, /* ** .pp ** Since there is no pubring/secring as with PGP, mutt has to handle ** storage and retrieval of keys by itself. This is very basic right ** now, and keys and certificates are stored in two different ** directories, both named as the hash-value retrieved from ** OpenSSL. There is an index file which contains mailbox-address ** keyid pairs, and which can be manually edited. This one points to ** the location of the certificates. ** (S/MIME only) */ { "smime_decrypt_command", DT_STR, R_NONE, UL &SmimeDecryptCommand, 0}, /* ** .pp ** This format string specifies a command which is used to decrypt ** application/x-pkcs7-mime attachments. ** .pp ** The OpenSSL command formats have their own set of printf-like sequences ** similar to PGP's: ** .pp ** .dl ** .dt %f .dd Expands to the name of a file containing a message. ** .dt %s .dd Expands to the name of a file containing the signature part ** . of a multipart/signed attachment when verifying it. ** .dt %k .dd The key-pair specified with $$smime_default_key ** .dt %c .dd One or more certificate IDs. ** .dt %a .dd The algorithm used for encryption. ** .dt %C .dd CA location: Depending on whether $$smime_ca_location ** . points to a directory or file, this expands to ** . "-CApath $$smime_ca_location" or "-CAfile $$smime_ca_location". ** .de ** .pp ** For examples on how to configure these formats, see the smime.rc in ** the samples/ subdirectory which has been installed on your system ** alongside the documentation. ** (S/MIME only) */ { "smime_verify_command", DT_STR, R_NONE, UL &SmimeVerifyCommand, 0}, /* ** .pp ** This command is used to verify S/MIME signatures of type multipart/signed. ** (S/MIME only) */ { "smime_verify_opaque_command", DT_STR, R_NONE, UL &SmimeVerifyOpaqueCommand, 0}, /* ** .pp ** This command is used to verify S/MIME signatures of type ** application/x-pkcs7-mime. ** (S/MIME only) */ { "smime_sign_command", DT_STR, R_NONE, UL &SmimeSignCommand, 0}, /* ** .pp ** This command is used to created S/MIME signatures of type ** multipart/signed, which can be read by all mail clients. ** (S/MIME only) */ { "smime_sign_opaque_command", DT_STR, R_NONE, UL &SmimeSignOpaqueCommand, 0}, /* ** .pp ** This command is used to created S/MIME signatures of type ** application/x-pkcs7-signature, which can only be handled by mail ** clients supporting the S/MIME extension. ** (S/MIME only) */ { "smime_encrypt_command", DT_STR, R_NONE, UL &SmimeEncryptCommand, 0}, /* ** .pp ** This command is used to create encrypted S/MIME messages. ** (S/MIME only) */ { "smime_pk7out_command", DT_STR, R_NONE, UL &SmimePk7outCommand, 0}, /* ** .pp ** This command is used to extract PKCS7 structures of S/MIME signatures, ** in order to extract the public X509 certificate(s). ** (S/MIME only) */ { "smime_get_cert_command", DT_STR, R_NONE, UL &SmimeGetCertCommand, 0}, /* ** .pp ** This command is used to extract X509 certificates from a PKCS7 structure. ** (S/MIME only) */ { "smime_get_signer_cert_command", DT_STR, R_NONE, UL &SmimeGetSignerCertCommand, 0}, /* ** .pp ** This command is used to extract only the signers X509 certificate from a S/MIME ** signature, so that the certificate's owner may get compared to the ** email's 'From'-field. ** (S/MIME only) */ { "smime_import_cert_command", DT_STR, R_NONE, UL &SmimeImportCertCommand, 0}, /* ** .pp ** This command is used to import a certificate via smime_keys. ** (S/MIME only) */ { "smime_get_cert_email_command", DT_STR, R_NONE, UL &SmimeGetCertEmailCommand, 0}, /* ** .pp ** This command is used to extract the mail address(es) used for storing ** X509 certificates, and for verification purposes (to check whether the ** certificate was issued for the sender's mailbox). ** (S/MIME only) */ { "smime_sign_as", DT_SYN, R_NONE, UL "smime_default_key", 0 }, { "smime_default_key", DT_STR, R_NONE, UL &SmimeDefaultKey, 0 }, /* ** .pp ** This is the default key-pair to use for signing. This must be set to the ** keyid (the hash-value that OpenSSL generates) to work properly ** (S/MIME only) */ #if defined(USE_SSL) #ifdef USE_SSL_OPENSSL { "ssl_client_cert", DT_PATH, R_NONE, UL &SslClientCert, 0 }, /* ** .pp ** The file containing a client certificate and its associated private ** key. */ #endif /* USE_SSL_OPENSSL */ { "ssl_force_tls", DT_BOOL, R_NONE, OPTSSLFORCETLS, 0 }, /* ** .pp ** If this variable is set, Mutt will require that all connections ** to remote servers be encrypted. Furthermore it will attempt to ** negotiate TLS even if the server does not advertise the capability, ** since it would otherwise have to abort the connection anyway. This ** option supersedes ``$$ssl_starttls''. */ { "ssl_starttls", DT_QUAD, R_NONE, OPT_SSLSTARTTLS, M_YES }, /* ** .pp ** If set (the default), mutt will attempt to use STARTTLS on servers ** advertising the capability. When unset, mutt will not attempt to ** use STARTTLS regardless of the server's capabilities. */ { "certificate_file", DT_PATH, R_NONE, UL &SslCertFile, UL "~/.mutt_certificates" }, /* ** .pp ** This variable specifies the file where the certificates you trust ** are saved. When an unknown certificate is encountered, you are asked ** if you accept it or not. If you accept it, the certificate can also ** be saved in this file and further connections are automatically ** accepted. ** .pp ** You can also manually add CA certificates in this file. Any server ** certificate that is signed with one of these CA certificates are ** also automatically accepted. ** .pp ** Example: set certificate_file=~/.mutt/certificates */ # ifdef USE_SSL_OPENSSL { "ssl_usesystemcerts", DT_BOOL, R_NONE, OPTSSLSYSTEMCERTS, 1 }, /* ** .pp ** If set to \fIyes\fP, mutt will use CA certificates in the ** system-wide certificate store when checking if server certificate ** is signed by a trusted CA. */ { "entropy_file", DT_PATH, R_NONE, UL &SslEntropyFile, 0 }, /* ** .pp ** The file which includes random data that is used to initialize SSL ** library functions. */ { "ssl_use_sslv2", DT_BOOL, R_NONE, OPTSSLV2, 1 }, /* ** .pp ** This variables specifies whether to attempt to use SSLv2 in the ** SSL authentication process. */ # endif /* defined USE_SSL_OPENSSL */ { "ssl_use_sslv3", DT_BOOL, R_NONE, OPTSSLV3, 1 }, /* ** .pp ** This variables specifies whether to attempt to use SSLv3 in the ** SSL authentication process. */ { "ssl_use_tlsv1", DT_BOOL, R_NONE, OPTTLSV1, 1 }, /* ** .pp ** This variables specifies whether to attempt to use TLSv1 in the ** SSL authentication process. */ # ifdef USE_SSL_GNUTLS { "ssl_min_dh_prime_bits", DT_NUM, R_NONE, UL &SslDHPrimeBits, 0 }, /* ** .pp ** This variable specifies the minimum acceptable prime size (in bits) ** for use in any Diffie-Hellman key exchange. A value of 0 will use ** the default from the GNUTLS library. */ { "ssl_ca_certificates_file", DT_PATH, R_NONE, UL &SslCACertFile, 0 }, /* ** .pp ** This variable specifies a file containing trusted CA certificates. ** Any server certificate that is signed with one of these CA ** certificates are also automatically accepted. ** .pp ** Example: set ssl_ca_certificates_file=/etc/ssl/certs/ca-certificates.crt */ # endif /* USE_SSL_GNUTLS */ #endif /* defined(USE_SSL) */ { "pipe_split", DT_BOOL, R_NONE, OPTPIPESPLIT, 0 }, /* ** .pp ** Used in connection with the \fIpipe-message\fP command and the ``tag- ** prefix'' operator. If this variable is unset, when piping a list of ** tagged messages Mutt will concatenate the messages and will pipe them ** as a single folder. When set, Mutt will pipe the messages one by one. ** In both cases the messages are piped in the current sorted order, ** and the ``$$pipe_sep'' separator is added after each message. */ { "pipe_decode", DT_BOOL, R_NONE, OPTPIPEDECODE, 0 }, /* ** .pp ** Used in connection with the \fIpipe-message\fP command. When unset, ** Mutt will pipe the messages without any preprocessing. When set, Mutt ** will weed headers and will attempt to PGP/MIME decode the messages ** first. */ { "pipe_sep", DT_STR, R_NONE, UL &PipeSep, UL "\n" }, /* ** .pp ** The separator to add between messages when piping a list of tagged ** messages to an external Unix command. */ #ifdef USE_POP { "pop_authenticators", DT_STR, R_NONE, UL &PopAuthenticators, UL 0 }, /* ** .pp ** This is a colon-delimited list of authentication methods mutt may ** attempt to use to log in to an POP server, in the order mutt should ** try them. Authentication methods are either 'user', 'apop' or any ** SASL mechanism, eg 'digest-md5', 'gssapi' or 'cram-md5'. ** This parameter is case-insensitive. If this parameter is unset ** (the default) mutt will try all available methods, in order from ** most-secure to least-secure. ** .pp ** Example: set pop_authenticators="digest-md5:apop:user" */ { "pop_auth_try_all", DT_BOOL, R_NONE, OPTPOPAUTHTRYALL, 1 }, /* ** .pp ** If set, Mutt will try all available methods. When unset, Mutt will ** only fall back to other authentication methods if the previous ** methods are unavailable. If a method is available but authentication ** fails, Mutt will not connect to the POP server. */ { "pop_checkinterval", DT_NUM, R_NONE, UL &PopCheckTimeout, 60 }, /* ** .pp ** This variable configures how often (in seconds) mutt should look for ** new mail in the currently selected mailbox if it is a POP mailbox. */ { "pop_delete", DT_QUAD, R_NONE, OPT_POPDELETE, M_ASKNO }, /* ** .pp ** If set, Mutt will delete successfully downloaded messages from the POP ** server when using the fetch-mail function. When unset, Mutt will ** download messages but also leave them on the POP server. */ { "pop_host", DT_STR, R_NONE, UL &PopHost, UL "" }, /* ** .pp ** The name of your POP server for the fetch-mail function. You ** can also specify an alternative port, username and password, ie: ** .pp ** [pop[s]://][username[:password]@]popserver[:port] */ { "pop_last", DT_BOOL, R_NONE, OPTPOPLAST, 0 }, /* ** .pp ** If this variable is set, mutt will try to use the "LAST" POP command ** for retrieving only unread messages from the POP server when using ** the fetch-mail function. */ { "pop_reconnect", DT_QUAD, R_NONE, OPT_POPRECONNECT, M_ASKYES }, /* ** .pp ** Controls whether or not Mutt will try to reconnect to POP server if ** the connection is lost. */ { "pop_user", DT_STR, R_NONE, UL &PopUser, 0 }, /* ** .pp ** Your login name on the POP server. ** .pp ** This variable defaults to your user name on the local machine. */ { "pop_pass", DT_STR, R_NONE, UL &PopPass, UL "" }, /* ** .pp ** Specifies the password for your POP account. If unset, Mutt will ** prompt you for your password when you open POP mailbox. ** \fBWarning\fP: you should only use this option when you are on a ** fairly secure machine, because the superuser can read your muttrc ** even if you are the only one who can read the file. */ #endif /* USE_POP */ { "post_indent_string",DT_STR, R_NONE, UL &PostIndentString, UL "" }, /* ** .pp ** Similar to the ``$$attribution'' variable, Mutt will append this ** string after the inclusion of a message which is being replied to. */ { "post_indent_str", DT_SYN, R_NONE, UL "post_indent_string", 0 }, /* */ { "postpone", DT_QUAD, R_NONE, OPT_POSTPONE, M_ASKYES }, /* ** .pp ** Controls whether or not messages are saved in the ``$$postponed'' ** mailbox when you elect not to send immediately. */ { "postponed", DT_PATH, R_NONE, UL &Postponed, UL "~/postponed" }, /* ** .pp ** Mutt allows you to indefinitely ``$postpone sending a message'' which ** you are editing. When you choose to postpone a message, Mutt saves it ** in the mailbox specified by this variable. Also see the ``$$postpone'' ** variable. */ #ifdef USE_SOCKET { "preconnect", DT_STR, R_NONE, UL &Preconnect, UL 0}, /* ** .pp ** If set, a shell command to be executed if mutt fails to establish ** a connection to the server. This is useful for setting up secure ** connections, e.g. with ssh(1). If the command returns a nonzero ** status, mutt gives up opening the server. Example: ** .pp ** preconnect="ssh -f -q -L 1234:mailhost.net:143 mailhost.net ** sleep 20 < /dev/null > /dev/null" ** .pp ** Mailbox 'foo' on mailhost.net can now be reached ** as '{localhost:1234}foo'. ** .pp ** NOTE: For this example to work, you must be able to log in to the ** remote machine without having to enter a password. */ #endif /* USE_SOCKET */ { "print", DT_QUAD, R_NONE, OPT_PRINT, M_ASKNO }, /* ** .pp ** Controls whether or not Mutt really prints messages. ** This is set to \fIask-no\fP by default, because some people ** accidentally hit ``p'' often (like me). */ { "print_command", DT_PATH, R_NONE, UL &PrintCmd, UL "lpr" }, /* ** .pp ** This specifies the command pipe that should be used to print messages. */ { "print_cmd", DT_SYN, R_NONE, UL "print_command", 0 }, /* */ { "print_decode", DT_BOOL, R_NONE, OPTPRINTDECODE, 1 }, /* ** .pp ** Used in connection with the print-message command. If this ** option is set, the message is decoded before it is passed to the ** external command specified by $$print_command. If this option ** is unset, no processing will be applied to the message when ** printing it. The latter setting may be useful if you are using ** some advanced printer filter which is able to properly format ** e-mail messages for printing. */ { "print_split", DT_BOOL, R_NONE, OPTPRINTSPLIT, 0 }, /* ** .pp ** Used in connection with the print-message command. If this option ** is set, the command specified by $$print_command is executed once for ** each message which is to be printed. If this option is unset, ** the command specified by $$print_command is executed only once, and ** all the messages are concatenated, with a form feed as the message ** separator. ** .pp ** Those who use the \fBenscript\fP(1) program's mail-printing mode will ** most likely want to set this option. */ { "prompt_after", DT_BOOL, R_NONE, OPTPROMPTAFTER, 1 }, /* ** .pp ** If you use an \fIexternal\fP ``$$pager'', setting this variable will ** cause Mutt to prompt you for a command when the pager exits rather ** than returning to the index menu. If unset, Mutt will return to the ** index menu when the external pager exits. */ { "query_command", DT_PATH, R_NONE, UL &QueryCmd, UL "" }, /* ** .pp ** This specifies the command that mutt will use to make external address ** queries. The string should contain a %s, which will be substituted ** with the query string the user types. See ``$query'' for more ** information. */ { "quit", DT_QUAD, R_NONE, OPT_QUIT, M_YES }, /* ** .pp ** This variable controls whether ``quit'' and ``exit'' actually quit ** from mutt. If it set to yes, they do quit, if it is set to no, they ** have no effect, and if it is set to ask-yes or ask-no, you are ** prompted for confirmation when you try to quit. */ { "quote_regexp", DT_RX, R_PAGER, UL &QuoteRegexp, UL "^([ \t]*[|>:}#])+" }, /* ** .pp ** A regular expression used in the internal-pager to determine quoted ** sections of text in the body of a message. ** .pp ** \fBNote:\fP In order to use the \fIquoted\fP\fBx\fP patterns in the ** internal pager, you need to set this to a regular expression that ** matches \fIexactly\fP the quote characters at the beginning of quoted ** lines. */ { "read_inc", DT_NUM, R_NONE, UL &ReadInc, 10 }, /* ** .pp ** If set to a value greater than 0, Mutt will display which message it ** is currently on when reading a mailbox or when performing search actions ** such as search and limit. The message is printed after ** \fIread_inc\fP messages have been read or searched (e.g., if set to 25, Mutt will ** print a message when it is at message 25, and then again when it gets ** to message 50). This variable is meant to indicate progress when ** reading or searching large mailboxes which may take some time. ** When set to 0, only a single message will appear before the reading ** the mailbox. ** .pp ** Also see the ``$$write_inc'' variable and the ``Tuning'' section of the ** manual for performance considerations. */ { "read_only", DT_BOOL, R_NONE, OPTREADONLY, 0 }, /* ** .pp ** If set, all folders are opened in read-only mode. */ { "realname", DT_STR, R_BOTH, UL &Realname, 0 }, /* ** .pp ** This variable specifies what "real" or "personal" name should be used ** when sending messages. ** .pp ** By default, this is the GECOS field from /etc/passwd. Note that this ** variable will \fInot\fP be used when the user has set a real name ** in the $$from variable. */ { "recall", DT_QUAD, R_NONE, OPT_RECALL, M_ASKYES }, /* ** .pp ** Controls whether or not Mutt recalls postponed messages ** when composing a new message. Also see ``$$postponed''. ** .pp ** Setting this variable to ``yes'' is not generally useful, and thus not ** recommended. */ { "record", DT_PATH, R_NONE, UL &Outbox, UL "~/sent" }, /* ** .pp ** This specifies the file into which your outgoing messages should be ** appended. (This is meant as the primary method for saving a copy of ** your messages, but another way to do this is using the ``$my_hdr'' ** command to create a \fIBcc:\fP field with your email address in it.) ** .pp ** The value of \fI$$record\fP is overridden by the ``$$force_name'' and ** ``$$save_name'' variables, and the ``$fcc-hook'' command. */ { "reply_regexp", DT_RX, R_INDEX|R_RESORT, UL &ReplyRegexp, UL "^(re([\\[0-9\\]+])*|aw):[ \t]*" }, /* ** .pp ** A regular expression used to recognize reply messages when threading ** and replying. The default value corresponds to the English "Re:" and ** the German "Aw:". */ { "reply_self", DT_BOOL, R_NONE, OPTREPLYSELF, 0 }, /* ** .pp ** If unset and you are replying to a message sent by you, Mutt will ** assume that you want to reply to the recipients of that message rather ** than to yourself. */ { "reply_to", DT_QUAD, R_NONE, OPT_REPLYTO, M_ASKYES }, /* ** .pp ** If set, when replying to a message, Mutt will use the address listed ** in the Reply-to: header as the recipient of the reply. If unset, ** it will use the address in the From: header field instead. This ** option is useful for reading a mailing list that sets the Reply-To: ** header field to the list address and you want to send a private ** message to the author of a message. */ { "resolve", DT_BOOL, R_NONE, OPTRESOLVE, 1 }, /* ** .pp ** When set, the cursor will be automatically advanced to the next ** (possibly undeleted) message whenever a command that modifies the ** current message is executed. */ { "reverse_alias", DT_BOOL, R_BOTH, OPTREVALIAS, 0 }, /* ** .pp ** This variable controls whether or not Mutt will display the "personal" ** name from your aliases in the index menu if it finds an alias that ** matches the message's sender. For example, if you have the following ** alias: ** .pp ** .ts ** alias juser abd30425@somewhere.net (Joe User) ** .te ** .pp ** and then you receive mail which contains the following header: ** .pp ** .ts ** From: abd30425@somewhere.net ** .te ** .pp ** It would be displayed in the index menu as ``Joe User'' instead of ** ``abd30425@somewhere.net.'' This is useful when the person's e-mail ** address is not human friendly (like CompuServe addresses). */ { "reverse_name", DT_BOOL, R_BOTH, OPTREVNAME, 0 }, /* ** .pp ** It may sometimes arrive that you receive mail to a certain machine, ** move the messages to another machine, and reply to some the messages ** from there. If this variable is set, the default \fIFrom:\fP line of ** the reply messages is built using the address where you received the ** messages you are replying to \fBif\fP that address matches your ** alternates. If the variable is unset, or the address that would be ** used doesn't match your alternates, the \fIFrom:\fP line will use ** your address on the current machine. */ { "reverse_realname", DT_BOOL, R_BOTH, OPTREVREAL, 1 }, /* ** .pp ** This variable fine-tunes the behaviour of the $reverse_name feature. ** When it is set, mutt will use the address from incoming messages as-is, ** possibly including eventual real names. When it is unset, mutt will ** override any such real names with the setting of the $realname variable. */ { "rfc2047_parameters", DT_BOOL, R_NONE, OPTRFC2047PARAMS, 0 }, /* ** .pp ** When this variable is set, Mutt will decode RFC-2047-encoded MIME ** parameters. You want to set this variable when mutt suggests you ** to save attachments to files named like this: ** =?iso-8859-1?Q?file=5F=E4=5F991116=2Ezip?= ** .pp ** When this variable is set interactively, the change doesn't have ** the desired effect before you have changed folders. ** .pp ** Note that this use of RFC 2047's encoding is explicitly, ** prohibited by the standard, but nevertheless encountered in the ** wild. ** Also note that setting this parameter will \fInot\fP have the effect ** that mutt \fIgenerates\fP this kind of encoding. Instead, mutt will ** unconditionally use the encoding specified in RFC 2231. */ { "save_address", DT_BOOL, R_NONE, OPTSAVEADDRESS, 0 }, /* ** .pp ** If set, mutt will take the sender's full address when choosing a ** default folder for saving a mail. If ``$$save_name'' or ``$$force_name'' ** is set too, the selection of the fcc folder will be changed as well. */ { "save_empty", DT_BOOL, R_NONE, OPTSAVEEMPTY, 1 }, /* ** .pp ** When unset, mailboxes which contain no saved messages will be removed ** when closed (the exception is ``$$spoolfile'' which is never removed). ** If set, mailboxes are never removed. ** .pp ** \fBNote:\fP This only applies to mbox and MMDF folders, Mutt does not ** delete MH and Maildir directories. */ { "save_history", DT_NUM, R_NONE, UL &SaveHist, 0 }, /* ** .pp ** This variable controls the size of the history saved in the ** ``$$history_file'' file. */ { "save_name", DT_BOOL, R_NONE, OPTSAVENAME, 0 }, /* ** .pp ** This variable controls how copies of outgoing messages are saved. ** When set, a check is made to see if a mailbox specified by the ** recipient address exists (this is done by searching for a mailbox in ** the ``$$folder'' directory with the \fIusername\fP part of the ** recipient address). If the mailbox exists, the outgoing message will ** be saved to that mailbox, otherwise the message is saved to the ** ``$$record'' mailbox. ** .pp ** Also see the ``$$force_name'' variable. */ { "score", DT_BOOL, R_NONE, OPTSCORE, 1 }, /* ** .pp ** When this variable is \fIunset\fP, scoring is turned off. This can ** be useful to selectively disable scoring for certain folders when the ** ``$$score_threshold_delete'' variable and friends are used. ** */ { "score_threshold_delete", DT_NUM, R_NONE, UL &ScoreThresholdDelete, UL -1 }, /* ** .pp ** Messages which have been assigned a score equal to or lower than the value ** of this variable are automatically marked for deletion by mutt. Since ** mutt scores are always greater than or equal to zero, the default setting ** of this variable will never mark a message for deletion. */ { "score_threshold_flag", DT_NUM, R_NONE, UL &ScoreThresholdFlag, 9999 }, /* ** .pp ** Messages which have been assigned a score greater than or equal to this ** variable's value are automatically marked "flagged". */ { "score_threshold_read", DT_NUM, R_NONE, UL &ScoreThresholdRead, UL -1 }, /* ** .pp ** Messages which have been assigned a score equal to or lower than the value ** of this variable are automatically marked as read by mutt. Since ** mutt scores are always greater than or equal to zero, the default setting ** of this variable will never mark a message read. */ { "send_charset", DT_STR, R_NONE, UL &SendCharset, UL "us-ascii:iso-8859-1:utf-8" }, /* ** .pp ** A colon-delimited list of character sets for outgoing messages. Mutt will use the ** first character set into which the text can be converted exactly. ** If your ``$$charset'' is not iso-8859-1 and recipients may not ** understand UTF-8, it is advisable to include in the list an ** appropriate widely used standard character set (such as ** iso-8859-2, koi8-r or iso-2022-jp) either instead of or after ** "iso-8859-1". ** .pp ** In case the text cannot be converted into one of these exactly, ** mutt uses ``$$charset'' as a fallback. */ { "sendmail", DT_PATH, R_NONE, UL &Sendmail, UL SENDMAIL " -oem -oi" }, /* ** .pp ** Specifies the program and arguments used to deliver mail sent by Mutt. ** Mutt expects that the specified program interprets additional ** arguments as recipient addresses. */ { "sendmail_wait", DT_NUM, R_NONE, UL &SendmailWait, 0 }, /* ** .pp ** Specifies the number of seconds to wait for the ``$$sendmail'' process ** to finish before giving up and putting delivery in the background. ** .pp ** Mutt interprets the value of this variable as follows: ** .dl ** .dt >0 .dd number of seconds to wait for sendmail to finish before continuing ** .dt 0 .dd wait forever for sendmail to finish ** .dt <0 .dd always put sendmail in the background without waiting ** .de ** .pp ** Note that if you specify a value other than 0, the output of the child ** process will be put in a temporary file. If there is some error, you ** will be informed as to where to find the output. */ { "shell", DT_PATH, R_NONE, UL &Shell, 0 }, /* ** .pp ** Command to use when spawning a subshell. By default, the user's login ** shell from /etc/passwd is used. */ { "sig_dashes", DT_BOOL, R_NONE, OPTSIGDASHES, 1 }, /* ** .pp ** If set, a line containing ``-- '' will be inserted before your ** ``$$signature''. It is \fBstrongly\fP recommended that you not unset ** this variable unless your ``signature'' contains just your name. The ** reason for this is because many software packages use ``-- \n'' to ** detect your signature. For example, Mutt has the ability to highlight ** the signature in a different color in the builtin pager. */ { "sig_on_top", DT_BOOL, R_NONE, OPTSIGONTOP, 0}, /* ** .pp ** If set, the signature will be included before any quoted or forwarded ** text. It is \fBstrongly\fP recommended that you do not set this variable ** unless you really know what you are doing, and are prepared to take ** some heat from netiquette guardians. */ { "signature", DT_PATH, R_NONE, UL &Signature, UL "~/.signature" }, /* ** .pp ** Specifies the filename of your signature, which is appended to all ** outgoing messages. If the filename ends with a pipe (``|''), it is ** assumed that filename is a shell command and input should be read from ** its stdout. */ { "simple_search", DT_STR, R_NONE, UL &SimpleSearch, UL "~f %s | ~s %s" }, /* ** .pp ** Specifies how Mutt should expand a simple search into a real search ** pattern. A simple search is one that does not contain any of the ~ ** operators. See ``$patterns'' for more information on search patterns. ** .pp ** For example, if you simply type joe at a search or limit prompt, Mutt ** will automatically expand it to the value specified by this variable. ** For the default value it would be: ** .pp ** ~f joe | ~s joe */ { "smart_wrap", DT_BOOL, R_PAGER, OPTWRAP, 1 }, /* ** .pp ** Controls the display of lines longer than the screen width in the ** internal pager. If set, long lines are wrapped at a word boundary. If ** unset, lines are simply wrapped at the screen edge. Also see the ** ``$$markers'' variable. */ { "smileys", DT_RX, R_PAGER, UL &Smileys, UL "(>From )|(:[-^]?[][)(><}{|/DP])" }, /* ** .pp ** The \fIpager\fP uses this variable to catch some common false ** positives of ``$$quote_regexp'', most notably smileys in the beginning ** of a line */ { "sleep_time", DT_NUM, R_NONE, UL &SleepTime, 1 }, /* ** .pp ** Specifies time, in seconds, to pause while displaying certain informational ** messages, while moving from folder to folder and after expunging ** messages from the current folder. The default is to pause one second, so ** a value of zero for this option suppresses the pause. */ #ifdef USE_SMTP # ifdef USE_SASL { "smtp_authenticators", DT_STR, R_NONE, UL &SmtpAuthenticators, UL 0 }, /* ** .pp ** This is a colon-delimited list of authentication methods mutt may ** attempt to use to log in to an SMTP server, in the order mutt should ** try them. Authentication methods are any SASL mechanism, eg ** ``digest-md5'', ``gssapi'' or ``cram-md5''. ** This parameter is case-insensitive. If this parameter is unset ** (the default) mutt will try all available methods, in order from ** most-secure to least-secure. ** .pp ** Example: set smtp_authenticators="digest-md5:cram-md5" */ # endif /* USE_SASL */ { "smtp_pass", DT_STR, R_NONE, UL &SmtpPass, UL 0 }, /* ** .pp ** Specifies the password for your SMTP account. If \fIunset\fP, Mutt will ** prompt you for your password when you first send mail via SMTP. ** See ``$smtp_url'' to configure mutt to send mail via SMTP. ** \fBWarning\fP: you should only use this option when you are on a ** fairly secure machine, because the superuser can read your muttrc even ** if you are the only one who can read the file. */ { "smtp_url", DT_STR, R_NONE, UL &SmtpUrl, UL 0 }, /* ** .pp ** Defines the SMTP ``smart'' host where sent messages should relayed for ** delivery. This should take the form of an SMTP URL, eg: ** .pp ** smtp[s]://[user[:pass]@]host[:port]/ ** .pp ** Setting this variable overrides the value of the ``$$sendmail'' ** variable. */ #endif /* USE_SMTP */ { "sort", DT_SORT, R_INDEX|R_RESORT, UL &Sort, SORT_DATE }, /* ** .pp ** Specifies how to sort messages in the \fIindex\fP menu. Valid values ** are: ** .pp ** .ts ** . date or date-sent ** . date-received ** . from ** . mailbox-order (unsorted) ** . score ** . size ** . spam ** . subject ** . threads ** . to ** .te ** .pp ** You may optionally use the reverse- prefix to specify reverse sorting ** order (example: set sort=reverse-date-sent). */ { "sort_alias", DT_SORT|DT_SORT_ALIAS, R_NONE, UL &SortAlias, SORT_ALIAS }, /* ** .pp ** Specifies how the entries in the `alias' menu are sorted. The ** following are legal values: ** .pp ** .ts ** . address (sort alphabetically by email address) ** . alias (sort alphabetically by alias name) ** . unsorted (leave in order specified in .muttrc) ** .te */ { "sort_aux", DT_SORT|DT_SORT_AUX, R_INDEX|R_RESORT_BOTH, UL &SortAux, SORT_DATE }, /* ** .pp ** When sorting by threads, this variable controls how threads are sorted ** in relation to other threads, and how the branches of the thread trees ** are sorted. This can be set to any value that ``$$sort'' can, except ** threads (in that case, mutt will just use date-sent). You can also ** specify the last- prefix in addition to the reverse- prefix, but last- ** must come after reverse-. The last- prefix causes messages to be ** sorted against its siblings by which has the last descendant, using ** the rest of sort_aux as an ordering. For instance, set sort_aux=last- ** date-received would mean that if a new message is received in a ** thread, that thread becomes the last one displayed (or the first, if ** you have set sort=reverse-threads.) Note: For reversed ``$$sort'' ** order $$sort_aux is reversed again (which is not the right thing to do, ** but kept to not break any existing configuration setting). */ { "sort_browser", DT_SORT|DT_SORT_BROWSER, R_NONE, UL &BrowserSort, SORT_ALPHA }, /* ** .pp ** Specifies how to sort entries in the file browser. By default, the ** entries are sorted alphabetically. Valid values: ** .pp ** .ts ** . alpha (alphabetically) ** . date ** . size ** . unsorted ** .te ** .pp ** You may optionally use the reverse- prefix to specify reverse sorting ** order (example: set sort_browser=reverse-date). */ { "sort_re", DT_BOOL, R_INDEX|R_RESORT|R_RESORT_INIT, OPTSORTRE, 1 }, /* ** .pp ** This variable is only useful when sorting by threads with ** ``$$strict_threads'' unset. In that case, it changes the heuristic ** mutt uses to thread messages by subject. With sort_re set, mutt will ** only attach a message as the child of another message by subject if ** the subject of the child message starts with a substring matching the ** setting of ``$$reply_regexp''. With sort_re unset, mutt will attach ** the message whether or not this is the case, as long as the ** non-``$$reply_regexp'' parts of both messages are identical. */ { "spam_separator", DT_STR, R_NONE, UL &SpamSep, UL "," }, /* ** .pp ** ``$spam_separator'' controls what happens when multiple spam headers ** are matched: if unset, each successive header will overwrite any ** previous matches value for the spam label. If set, each successive ** match will append to the previous, using ``$spam_separator'' as a ** separator. */ { "spoolfile", DT_PATH, R_NONE, UL &Spoolfile, 0 }, /* ** .pp ** If your spool mailbox is in a non-default place where Mutt cannot find ** it, you can specify its location with this variable. Mutt will ** automatically set this variable to the value of the environment ** variable $$$MAIL if it is not set. */ { "status_chars", DT_STR, R_BOTH, UL &StChars, UL "-*%A" }, /* ** .pp ** Controls the characters used by the "%r" indicator in ** ``$$status_format''. The first character is used when the mailbox is ** unchanged. The second is used when the mailbox has been changed, and ** it needs to be resynchronized. The third is used if the mailbox is in ** read-only mode, or if the mailbox will not be written when exiting ** that mailbox (You can toggle whether to write changes to a mailbox ** with the toggle-write operation, bound by default to "%"). The fourth ** is used to indicate that the current folder has been opened in attach- ** message mode (Certain operations like composing a new mail, replying, ** forwarding, etc. are not permitted in this mode). */ { "status_format", DT_STR, R_BOTH, UL &Status, UL "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d? Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b?%?l? %l?]---(%s/%S)-%>-(%P)---" }, /* ** .pp ** Controls the format of the status line displayed in the \fIindex\fP ** menu. This string is similar to ``$$index_format'', but has its own ** set of printf()-like sequences: ** .pp ** .dl ** .dt %b .dd number of mailboxes with new mail * ** .dt %d .dd number of deleted messages * ** .dt %f .dd the full pathname of the current mailbox ** .dt %F .dd number of flagged messages * ** .dt %h .dd local hostname ** .dt %l .dd size (in bytes) of the current mailbox * ** .dt %L .dd size (in bytes) of the messages shown ** (i.e., which match the current limit) * ** .dt %m .dd the number of messages in the mailbox * ** .dt %M .dd the number of messages shown (i.e., which match the current limit) * ** .dt %n .dd number of new messages in the mailbox * ** .dt %o .dd number of old unread messages * ** .dt %p .dd number of postponed messages * ** .dt %P .dd percentage of the way through the index ** .dt %r .dd modified/read-only/won't-write/attach-message indicator, ** according to $$status_chars ** .dt %s .dd current sorting mode ($$sort) ** .dt %S .dd current aux sorting method ($$sort_aux) ** .dt %t .dd number of tagged messages * ** .dt %u .dd number of unread messages * ** .dt %v .dd Mutt version string ** .dt %V .dd currently active limit pattern, if any * ** .dt %>X .dd right justify the rest of the string and pad with "X" ** .dt %|X .dd pad to the end of the line with "X" ** .dt %*X .dd soft-fill with character "X" as pad ** .de ** .pp ** For an explanation of `soft-fill', see the ``$$index_format'' documentation. ** .pp ** * = can be optionally printed if nonzero ** .pp ** Some of the above sequences can be used to optionally print a string ** if their value is nonzero. For example, you may only want to see the ** number of flagged messages if such messages exist, since zero is not ** particularly meaningful. To optionally print a string based upon one ** of the above sequences, the following construct is used: ** .pp ** %??? ** .pp ** where \fIsequence_char\fP is a character from the table above, and ** \fIoptional_string\fP is the string you would like printed if ** \fIsequence_char\fP is nonzero. \fIoptional_string\fP \fBmay\fP contain ** other sequences as well as normal text, but you may \fBnot\fP nest ** optional strings. ** .pp ** Here is an example illustrating how to optionally print the number of ** new messages in a mailbox: ** %?n?%n new messages.? ** .pp ** You can also switch between two strings using the following construct: ** .pp ** %??&? ** .pp ** If the value of \fIsequence_char\fP is non-zero, \fIif_string\fP will ** be expanded, otherwise \fIelse_string\fP will be expanded. ** .pp ** You can force the result of any printf-like sequence to be lowercase ** by prefixing the sequence character with an underscore (_) sign. ** For example, if you want to display the local hostname in lowercase, ** you would use: ** %_h ** .pp ** If you prefix the sequence character with a colon (:) character, mutt ** will replace any dots in the expansion by underscores. This might be helpful ** with IMAP folders that don't like dots in folder names. */ { "status_on_top", DT_BOOL, R_BOTH, OPTSTATUSONTOP, 0 }, /* ** .pp ** Setting this variable causes the ``status bar'' to be displayed on ** the first line of the screen rather than near the bottom. */ { "strict_threads", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, OPTSTRICTTHREADS, 0 }, /* ** .pp ** If set, threading will only make use of the ``In-Reply-To'' and ** ``References'' fields when you ``$$sort'' by message threads. By ** default, messages with the same subject are grouped together in ** ``pseudo threads.''. This may not always be desirable, such as in a ** personal mailbox where you might have several unrelated messages with ** the subject ``hi'' which will get grouped together. See also ** ``$$sort_re'' for a less drastic way of controlling this ** behaviour. */ { "suspend", DT_BOOL, R_NONE, OPTSUSPEND, 1 }, /* ** .pp ** When \fIunset\fP, mutt won't stop when the user presses the terminal's ** \fIsusp\fP key, usually ``control-Z''. This is useful if you run mutt ** inside an xterm using a command like xterm -e mutt. */ { "text_flowed", DT_BOOL, R_NONE, OPTTEXTFLOWED, 0 }, /* ** .pp ** When set, mutt will generate text/plain; format=flowed attachments. ** This format is easier to handle for some mailing software, and generally ** just looks like ordinary text. To actually make use of this format's ** features, you'll need support in your editor. ** .pp ** Note that $$indent_string is ignored when this option is set. */ { "thread_received", DT_BOOL, R_RESORT|R_RESORT_INIT|R_INDEX, OPTTHREADRECEIVED, 0 }, /* ** .pp ** When set, mutt uses the date received rather than the date sent ** to thread messages by subject. */ { "thorough_search", DT_BOOL, R_NONE, OPTTHOROUGHSRC, 0 }, /* ** .pp ** Affects the \fI~b\fP and \fI~h\fP search operations described in ** section ``$patterns'' above. If set, the headers and attachments of ** messages to be searched are decoded before searching. If unset, ** messages are searched as they appear in the folder. */ { "tilde", DT_BOOL, R_PAGER, OPTTILDE, 0 }, /* ** .pp ** When set, the internal-pager will pad blank lines to the bottom of the ** screen with a tilde (~). */ { "timeout", DT_NUM, R_NONE, UL &Timeout, 600 }, /* ** .pp ** This variable controls the \fInumber of seconds\fP Mutt will wait ** for a key to be pressed in the main menu before timing out and ** checking for new mail. A value of zero or less will cause Mutt ** to never time out. */ { "tmpdir", DT_PATH, R_NONE, UL &Tempdir, 0 }, /* ** .pp ** This variable allows you to specify where Mutt will place its ** temporary files needed for displaying and composing messages. If ** this variable is not set, the environment variable TMPDIR is ** used. If TMPDIR is not set then "/tmp" is used. */ { "to_chars", DT_STR, R_BOTH, UL &Tochars, UL " +TCFL" }, /* ** .pp ** Controls the character used to indicate mail addressed to you. The ** first character is the one used when the mail is NOT addressed to your ** address (default: space). The second is used when you are the only ** recipient of the message (default: +). The third is when your address ** appears in the TO header field, but you are not the only recipient of ** the message (default: T). The fourth character is used when your ** address is specified in the CC header field, but you are not the only ** recipient. The fifth character is used to indicate mail that was sent ** by \fIyou\fP. The sixth character is used to indicate when a mail ** was sent to a mailing-list you subscribe to (default: L). */ #ifdef USE_SOCKET { "tunnel", DT_STR, R_NONE, UL &Tunnel, UL 0 }, /* ** .pp ** Setting this variable will cause mutt to open a pipe to a command ** instead of a raw socket. You may be able to use this to set up ** preauthenticated connections to your IMAP/POP3 server. Example: ** .pp ** tunnel="ssh -q mailhost.net /usr/local/libexec/imapd" ** .pp ** NOTE: For this example to work you must be able to log in to the remote ** machine without having to enter a password. */ #endif { "use_8bitmime", DT_BOOL, R_NONE, OPTUSE8BITMIME, 0 }, /* ** .pp ** \fBWarning:\fP do not set this variable unless you are using a version ** of sendmail which supports the -B8BITMIME flag (such as sendmail ** 8.8.x) or you may not be able to send mail. ** .pp ** When \fIset\fP, Mutt will invoke ``$$sendmail'' with the -B8BITMIME ** flag when sending 8-bit messages to enable ESMTP negotiation. */ { "use_domain", DT_BOOL, R_NONE, OPTUSEDOMAIN, 1 }, /* ** .pp ** When set, Mutt will qualify all local addresses (ones without the ** @host portion) with the value of ``$$hostname''. If \fIunset\fP, no ** addresses will be qualified. */ { "use_envelope_from", DT_BOOL, R_NONE, OPTENVFROM, 0 }, /* ** .pp ** When \fIset\fP, mutt will set the \fIenvelope\fP sender of the message. ** If ``$$envelope_from_address'' is set, it will be used as the sender ** address. If not, mutt will attempt to derive the sender from the ** "From:" header. ** .pp ** Note that this information is passed to sendmail command using the ** "-f" command line switch. Therefore setting this option is not useful ** if the ``$$sendmail'' variable already contains "-f" or if the ** executable pointed to by $$sendmail doesn't support the "-f" switch. */ { "envelope_from", DT_SYN, R_NONE, UL "use_envelope_from", 0 }, /* */ { "use_from", DT_BOOL, R_NONE, OPTUSEFROM, 1 }, /* ** .pp ** When \fIset\fP, Mutt will generate the `From:' header field when ** sending messages. If \fIunset\fP, no `From:' header field will be ** generated unless the user explicitly sets one using the ``$my_hdr'' ** command. */ #ifdef HAVE_LIBIDN { "use_idn", DT_BOOL, R_BOTH, OPTUSEIDN, 1}, /* ** .pp ** When \fIset\fP, Mutt will show you international domain names decoded. ** Note: You can use IDNs for addresses even if this is \fIunset\fP. ** This variable only affects decoding. */ #endif /* HAVE_LIBIDN */ #ifdef HAVE_GETADDRINFO { "use_ipv6", DT_BOOL, R_NONE, OPTUSEIPV6, 1}, /* ** .pp ** When \fIset\fP, Mutt will look for IPv6 addresses of hosts it tries to ** contact. If this option is unset, Mutt will restrict itself to IPv4 addresses. ** Normally, the default should work. */ #endif /* HAVE_GETADDRINFO */ { "user_agent", DT_BOOL, R_NONE, OPTXMAILER, 1}, /* ** .pp ** When \fIset\fP, mutt will add a "User-Agent" header to outgoing ** messages, indicating which version of mutt was used for composing ** them. */ { "visual", DT_PATH, R_NONE, UL &Visual, 0 }, /* ** .pp ** Specifies the visual editor to invoke when the \fI~v\fP command is ** given in the builtin editor. */ { "wait_key", DT_BOOL, R_NONE, OPTWAITKEY, 1 }, /* ** .pp ** Controls whether Mutt will ask you to press a key after \fIshell- ** escape\fP, \fIpipe-message\fP, \fIpipe-entry\fP, \fIprint-message\fP, ** and \fIprint-entry\fP commands. ** .pp ** It is also used when viewing attachments with ``$auto_view'', provided ** that the corresponding mailcap entry has a \fIneedsterminal\fP flag, ** and the external program is interactive. ** .pp ** When set, Mutt will always ask for a key. When unset, Mutt will wait ** for a key only if the external command returned a non-zero status. */ { "weed", DT_BOOL, R_NONE, OPTWEED, 1 }, /* ** .pp ** When set, mutt will weed headers when displaying, forwarding, ** printing, or replying to messages. */ { "wrap", DT_NUM, R_PAGER, UL &Wrap, 0 }, /* ** .pp ** When set to a positive value, mutt will wrap text at $$wrap characters. ** When set to a negative value, mutt will wrap text so that there are $$wrap ** characters of empty space on the right side of the terminal. */ { "wrap_search", DT_BOOL, R_NONE, OPTWRAPSEARCH, 1 }, /* ** .pp ** Controls whether searches wrap around the end of the mailbox. ** .pp ** When set, searches will wrap around the first (or last) message. When ** unset, searches will not wrap. */ { "wrapmargin", DT_NUM, R_PAGER, UL &Wrap, 0 }, /* ** .pp ** (DEPRECATED) Equivalent to setting $wrap with a negative value. */ { "write_inc", DT_NUM, R_NONE, UL &WriteInc, 10 }, /* ** .pp ** When writing a mailbox, a message will be printed every ** \fIwrite_inc\fP messages to indicate progress. If set to 0, only a ** single message will be displayed before writing a mailbox. ** .pp ** Also see the ``$$read_inc'' variable. */ { "write_bcc", DT_BOOL, R_NONE, OPTWRITEBCC, 1}, /* ** .pp ** Controls whether mutt writes out the Bcc header when preparing ** messages to be sent. Exim users may wish to unset this. If mutt ** is set to deliver directly via SMTP (see ``$$smtp_url''), this ** option does nothing: mutt will never write out the BCC header ** in this case. */ /*--*/ { NULL } }; const struct mapping_t SortMethods[] = { { "date", SORT_DATE }, { "date-sent", SORT_DATE }, { "date-received", SORT_RECEIVED }, { "mailbox-order", SORT_ORDER }, { "subject", SORT_SUBJECT }, { "from", SORT_FROM }, { "size", SORT_SIZE }, { "threads", SORT_THREADS }, { "to", SORT_TO }, { "score", SORT_SCORE }, { "spam", SORT_SPAM }, { NULL, 0 } }; /* same as SortMethods, but with "threads" replaced by "date" */ const struct mapping_t SortAuxMethods[] = { { "date", SORT_DATE }, { "date-sent", SORT_DATE }, { "date-received", SORT_RECEIVED }, { "mailbox-order", SORT_ORDER }, { "subject", SORT_SUBJECT }, { "from", SORT_FROM }, { "size", SORT_SIZE }, { "threads", SORT_DATE }, /* note: sort_aux == threads * isn't possible. */ { "to", SORT_TO }, { "score", SORT_SCORE }, { "spam", SORT_SPAM }, { NULL, 0 } }; const struct mapping_t SortBrowserMethods[] = { { "alpha", SORT_SUBJECT }, { "date", SORT_DATE }, { "size", SORT_SIZE }, { "unsorted", SORT_ORDER }, { NULL } }; const struct mapping_t SortAliasMethods[] = { { "alias", SORT_ALIAS }, { "address", SORT_ADDRESS }, { "unsorted", SORT_ORDER }, { NULL } }; const struct mapping_t SortKeyMethods[] = { { "address", SORT_ADDRESS }, { "date", SORT_DATE }, { "keyid", SORT_KEYID }, { "trust", SORT_TRUST }, { NULL } }; /* functions used to parse commands in a rc file */ static int parse_list (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_spam_list (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_unlist (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_group (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_ungroup (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_lists (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_unlists (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_alias (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_unalias (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_ignore (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_unignore (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_source (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_set (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_my_hdr (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_unmy_hdr (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_subscribe (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_unsubscribe (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_attachments (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_unattachments (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_alternates (BUFFER *, BUFFER *, unsigned long, BUFFER *); static int parse_unalternates (BUFFER *, BUFFER *, unsigned long, BUFFER *); /* Parse -group arguments */ static int parse_group_context (group_context_t **ctx, BUFFER *buf, BUFFER *s, unsigned long data, BUFFER *err); struct command_t { char *name; int (*func) (BUFFER *, BUFFER *, unsigned long, BUFFER *); unsigned long data; unsigned long data1; }; struct command_t Commands[] = { { "alternates", parse_alternates, 0 }, { "unalternates", parse_unalternates, 0 }, #ifdef USE_SOCKET { "account-hook", mutt_parse_hook, M_ACCOUNTHOOK }, #endif { "alias", parse_alias, 0 }, { "attachments", parse_attachments, 0 }, { "unattachments",parse_unattachments,0 }, { "auto_view", parse_list, UL &AutoViewList }, { "alternative_order", parse_list, UL &AlternativeOrderList}, { "bind", mutt_parse_bind, 0 }, { "charset-hook", mutt_parse_hook, M_CHARSETHOOK }, #ifdef HAVE_COLOR { "color", mutt_parse_color, 0 }, { "uncolor", mutt_parse_uncolor, 0 }, #endif { "exec", mutt_parse_exec, 0 }, { "fcc-hook", mutt_parse_hook, M_FCCHOOK }, { "fcc-save-hook", mutt_parse_hook, M_FCCHOOK | M_SAVEHOOK }, { "folder-hook", mutt_parse_hook, M_FOLDERHOOK }, { "group", parse_group, 0 }, { "ungroup", parse_ungroup, 0 }, { "hdr_order", parse_list, UL &HeaderOrderList }, #ifdef HAVE_ICONV { "iconv-hook", mutt_parse_hook, M_ICONVHOOK }, #endif { "ignore", parse_ignore, 0 }, { "lists", parse_lists, 0 }, { "macro", mutt_parse_macro, 0 }, { "mailboxes", mutt_parse_mailboxes, M_MAILBOXES }, { "unmailboxes", mutt_parse_mailboxes, M_UNMAILBOXES }, { "message-hook", mutt_parse_hook, M_MESSAGEHOOK }, { "mbox-hook", mutt_parse_hook, M_MBOXHOOK }, { "mime_lookup", parse_list, UL &MimeLookupList }, { "unmime_lookup", parse_unlist, UL &MimeLookupList }, { "mono", mutt_parse_mono, 0 }, { "my_hdr", parse_my_hdr, 0 }, { "pgp-hook", mutt_parse_hook, M_CRYPTHOOK }, { "crypt-hook", mutt_parse_hook, M_CRYPTHOOK }, { "push", mutt_parse_push, 0 }, { "reply-hook", mutt_parse_hook, M_REPLYHOOK }, { "reset", parse_set, M_SET_RESET }, { "save-hook", mutt_parse_hook, M_SAVEHOOK }, { "score", mutt_parse_score, 0 }, { "send-hook", mutt_parse_hook, M_SENDHOOK }, { "send2-hook", mutt_parse_hook, M_SEND2HOOK }, { "set", parse_set, 0 }, { "source", parse_source, 0 }, { "spam", parse_spam_list, M_SPAM }, { "nospam", parse_spam_list, M_NOSPAM }, { "subscribe", parse_subscribe, 0 }, { "toggle", parse_set, M_SET_INV }, { "unalias", parse_unalias, 0 }, { "unalternative_order",parse_unlist, UL &AlternativeOrderList }, { "unauto_view", parse_unlist, UL &AutoViewList }, { "unhdr_order", parse_unlist, UL &HeaderOrderList }, { "unhook", mutt_parse_unhook, 0 }, { "unignore", parse_unignore, 0 }, { "unlists", parse_unlists, 0 }, { "unmono", mutt_parse_unmono, 0 }, { "unmy_hdr", parse_unmy_hdr, 0 }, { "unscore", mutt_parse_unscore, 0 }, { "unset", parse_set, M_SET_UNSET }, { "unsubscribe", parse_unsubscribe, 0 }, { NULL } };