/* config.h: a general config file */ /* don't change these values! */ #define SNMPV1 0xAAAA /* readable by anyone */ #define SNMPV2ANY 0xA000 /* V2 Any type (includes NoAuth) */ #define SNMPV2AUTH 0x8000 /* V2 Authenticated requests only */ /* default list of mibs to load */ #define DEFAULT_MIBS "IP-MIB:IF-MIB:TCP-MIB:UDP-MIB:SNMPv2-MIB:RFC1213-MIB" /* default location to look for mibs to load using the above tokens and/or those in the MIBS envrionment variable*/ #undef DEFAULT_MIBDIRS /* default mib files to load, specified by path. */ #undef DEFAULT_MIBFILES /* should we compile to use special opaque types: float, double, counter64, i64, ui64, union? */ #undef OPAQUE_SPECIAL_TYPES /* comment the next line if you are compiling with libsnmp.h and are not using the UC-Davis SNMP library. */ #define UCD_SNMP_LIBRARY 1 /* comment the next line if you do not want SNMPv2 party-based auth. */ #define USE_V2PARTY_PROTOCOL 1 /* add in recent CMU library extensions (not complete) */ #undef CMU_COMPATIBLE /* should "--" comments in mibs be a comment till the end of the line or also until another "--", the latter being the technically correct. */ #undef MIB_COMMENT_IS_EOL_TERMINATED /* debugging stuff */ #undef SNMP_NO_DEBUGGING /* if defined, we optimize the code to exclude all debugging calls. */ #define SNMP_ALWAYS_DEBUG 0 /* Always print debugging information and ignore the -D flag passed to the cmds */ @TOP@ /* define the system type include file here */ #define SYSTEM_INCLUDE_FILE "s/generic.h" /* define the machine (cpu) type include file here */ #define MACHINE_INCLUDE_FILE "m/generic.h" /* SNMPLIBDIR contains important files */ #undef SNMPLIBPATH #undef SNMPSHAREPATH /* LOGFILE: If defined it closes stdout/err/in and opens this in out/err's place. (stdin is closed so that sh scripts won't wait for it) */ #undef LOGFILE /* default system contact */ #undef SYS_CONTACT /* system location */ #undef SYS_LOC /* Use libwrap to handle allow/deny hosts? */ #undef USE_LIBWRAP /* location of UNIX kernel */ #define KERNEL_LOC "/vmunix" /* location of mount table list */ #define ETC_MNTTAB "/etc/mnttab" /* location of swap device (ok if not found) */ #undef DMEM_LOC /* Command to generate ps output, the final column must be the process name withOUT arguments */ #define PSCMD "/bin/ps" /* Where is the uname command */ #define UNAMEPROG "/bin/uname" /* If you don't have root access don't exit upon kmem errors */ #undef NO_ROOT_ACCESS /* Define if statfs takes 2 args and the second argument has type struct fs_data. [Ultrix] */ #undef STAT_STATFS_FS_DATA @BOTTOM@ /* define if you are using linux and /proc/net/dev has the compressed field, which exists in linux kernels 2.2 and greater. */ #undef PROC_NET_DEV_HAS_COMPRESSED /* define rtentry to ortentry on SYSV machines (alphas) */ #undef RTENTRY /* Use BSD 4.4 routing table entries? */ #undef RTENTRY_4_4 /* rtentry structure tests */ #undef RTENTRY_RT_NEXT #undef STRUCT_RTENTRY_HAS_RT_DST #undef STRUCT_RTENTRY_HAS_RT_UNIT #undef STRUCT_RTENTRY_HAS_RT_USE #undef STRUCT_RTENTRY_HAS_RT_REFCNT #undef STRUCT_RTENTRY_HAS_RT_HASH /* ifnet structure tests */ #undef STRUCT_IFNET_HAS_IF_BAUDRATE #undef STRUCT_IFNET_HAS_IF_SPEED #undef STRUCT_IFNET_HAS_IF_TYPE #undef STRUCT_IFNET_HAS_IF_IMCASTS #undef STRUCT_IFNET_HAS_IF_IQDROPS #undef STRUCT_IFNET_HAS_IF_LASTCHANGE_TV_SEC #undef STRUCT_IFNET_HAS_IF_NOPROTO #undef STRUCT_IFNET_HAS_IF_OMCASTS #undef STRUCT_IFNET_HAS_IF_XNAME #undef STRUCT_IFNET_HAS_IF_OBYTES #undef STRUCT_IFNET_HAS_IF_IBYTES #undef STRUCT_IFNET_HAS_IF_ADDRLIST /* tcpstat.tcps_rcvmemdrop */ #undef STRUCT_TCPSTAT_HAS_TCPS_RCVMEMDROP /* udpstat.udps_discard */ #undef STRUCT_UDPSTAT_HAS_UDPS_DISCARD /* arphd.at_next */ #undef STRUCT_ARPHD_HAS_AT_NEXT /* ifaddr.ifa_next */ #undef STRUCT_IFADDR_HAS_IFA_NEXT /* ifnet.if_mtu */ #undef STRUCT_IFNET_HAS_IF_MTU /* swdevt.sw_nblksenabled */ #undef STRUCT_SWDEVT_HAS_SW_NBLKSENABLED /* nlist.n_value */ #undef STRUCT_NLIST_HAS_N_VALUE /* vfsstat.f_frsize */ #undef STRUCT_STATVFS_HAS_F_FRSIZE /* ifnet needs to have _KERNEL defined */ #undef IFNET_NEEDS_KERNEL /* sysctl works to get boottime, etc... */ #undef CAN_USE_SYSCTL /* type check for in_addr_t */ #undef in_addr_t /* define if SIOCGIFADDR exists in sys/ioctl.h */ #undef SYS_IOCTL_H_HAS_SIOCGIFADDR /* define if your compiler (processor) defines __FUNCTION__ for you */ #undef HAVE_CPP_UNDERBAR_FUNCTION_DEFINED /* mib pointer to the top of the extensible tree. This has been assigned to UCDavis by the iana group. Optionally, point this to the location in the tree your company/organization has been allocated. */ /* location of the extensible mib tree */ #define EXTENSIBLEMIB 1,3,6,1,4,1,2021 /* location of the extensible mib tree */ #define EXTENSIBLEDOTMIB 1.3.6.1.4.1.2021 /* count the above numbers */ #define EXTENSIBLENUM 7 /* Mib-2 tree Info */ /* These are the system information variables. */ #define VERS_DESC "unknown" /* overridden at run time */ #define SYS_NAME "unknown" /* overridden at run time */ /* comment out the second define to turn off functionality for any of these: (See README for details) */ /* proc PROCESSNAME [MAX] [MIN] */ #define PROCMIBNUM 2 /* exec/shell NAME COMMAND */ #define SHELLMIBNUM 8 /* swap MIN */ #define MEMMIBNUM 4 /* disk DISK MINSIZE */ #define DISKMIBNUM 9 /* load 1 5 15 */ #define LOADAVEMIBNUM 10 /* which version are you using? This mibloc will tell you */ #define VERSIONMIBNUM 100 /* Reports errors the agent runs into */ /* (typically its "can't fork, no mem" problems) */ #define ERRORMIBNUM 101 /* The sub id of EXENSIBLEMIB returned to queries of .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 */ #define AGENTID 250 /* This ID is returned after the AGENTID above. IE, the resulting value returned by a query to sysObjectID is EXTENSIBLEMIB.AGENTID.???, where ??? is defined below by OSTYPE */ #define HPUX9ID 1 #define SUNOS4ID 2 #define SOLARISID 3 #define OSFID 4 #define ULTRIXID 5 #define HPUX10ID 6 #define NETBSD1ID 7 #define FREEBSDID 8 #define IRIXID 9 #define LINUXID 10 #define BSDIID 11 #define OPENBSDID 12 #define UNKNOWNID 255 #ifdef hpux9 #define OSTYPE HPUX9ID #endif #ifdef hpux10 #define OSTYPE HPUX10ID #endif #ifdef sunos4 #define OSTYPE SUNOS4ID #endif #ifdef solaris2 #define OSTYPE SOLARISID #endif #if defined(osf3) || defined(osf4) #define OSTYPE OSFID #endif #ifdef ultrix4 #define OSTYPE ULTRIXID #endif #ifdef netbsd1 #define OSTYPE NETBSD1ID #endif #if defined(freebsd2) || defined(freebsd3) #define OSTYPE FREEBSDID #endif #if defined(irix6) || defined(irix5) #define OSTYPE IRIXID #endif #ifdef linux #define OSTYPE LINUXID #endif #if defined(bsdi2) || defined(bsdi3) #define OSTYPE BSDIID #endif #ifdef openbsd2 #define OSTYPE OPENBSDID #endif /* unknown */ #ifndef OSTYPE #define OSTYPE UNKNOWNID #endif /* how long to wait (seconds) for error querys before reseting the error trap.*/ #define ERRORTIMELENGTH 600 /* Exec command to fix PROC problems */ /* %s will be replaced by the process name in error */ #define PROCFIXCMD "/usr/local/bin/perl /local/scripts/fixproc %s" /* Exec command to fix EXEC problems */ /* %s will be replaced by the exec/script name in error */ #define EXECFIXCMD "/usr/local/bin/perl /local/scripts/fixproc %s" /* Should exec output Cashing be used (speeds up things greatly), and if so, After how many seconds should the cache re-newed? Note: Don't define CASHETIME to disable cashing completely */ #define EXCACHETIME 30 #define CACHEFILE "/tmp/.snmp-exec-cache" #define MAXCACHESIZE (200*80) /* roughly 200 lines max */ #define MAXDISKS 50 /* can't scan more than this number */ /* misc defaults */ /* default of 100 meg minimum if the minimum size is not specified in the config file */ #define DEFDISKMINIMUMSPACE 100000 #define DEFMAXLOADAVE 12.0 /* default maximum load average before error */ #define MAXREADCOUNT 100 /* max times to loop reading output from execs. Because of sleep(1)s, this will also be time to wait (in seconds) for exec to finish */ #define SNMPBLOCK 1 /* Set to 1 if you want snmpgets to block and never timeout. Original CMU code had this hardcoded into the code as = 1 */ #define RESTARTSLEEP 5 /* How long to wait after a snmpset to EXTENSIBLEMIB.VERSIONMIBNUM.VERRESTARTAGENT before restarting the agent. This is necessary to finish the snmpset reply before restarting. */ /* Number of community strings to store */ #define NUM_COMMUNITIES 5 /* UNdefine to allow specifying zero-length community string */ /* #define NO_ZEROLENGTH_COMMUNITY 1 */ /* #define EXIT_ON_BAD_KLREAD */ /* define to exit the agent on a bad kernel read */ #define LASTFIELD -1 /* internal define */ /* configure options specified */ #define CONFIGURE_OPTIONS "" #ifndef HAVE_STRCHR #ifdef HAVE_INDEX # define strchr index # define strrchr rindex #endif #endif #ifndef HAVE_INDEX #ifdef HAVE_STRCHR # define index strchr # define rindex strrchr #endif #endif #ifndef HAVE_MEMCPY #ifdef HAVE_BCOPY # define memcpy(d, s, n) bcopy ((s), (d), (n)) # define memmove(d, s, n) bcopy ((s), (d), (n)) # define memcmp bcmp #endif #endif #ifndef HAVE_MEMMOVE #ifdef HAVE_MEMCPY # define memmove memcpy #endif #endif #ifndef HAVE_BCOPY #ifdef HAVE_MEMCPY # define bcopy(s, d, n) memcpy ((d), (s), (n)) # define bzero(p,n) memset((p),(0),(n)) # define bcmp memcmp #endif #endif /* define random functions */ #ifndef HAVE_RANDOM #ifdef HAVE_LRAND48 #define random lrand48 #define srandom(s) srand48(s) #else #ifdef HAVE_RAND #define random rand #define srandom(s) srand(s) #endif #endif #endif /* define signal if DNE */ #ifndef HAVE_SIGNAL #ifdef HAVE_SIGSET #define signal(a,b) sigset(a,b) #endif #endif /* define if you have librpm and libdb */ #undef HAVE_LIBRPM /* define if you have gethostbyname */ #undef HAVE_GETHOSTBYNAME /* define if you have getservbyname */ #undef HAVE_GETSERVBYNAME /* Not-to-be-compiled macros for use by configure only */ #define config_require(x) #define config_arch_require(x,y) #define config_load_mib(x,y,z) #define config_parse_dot_conf(w,x,y,z) #define config_add_mib(x) #include #ifdef WIN32 #define ENV_SEPARATOR ";" #define ENV_SEPARATOR_CHAR ';' #else #define ENV_SEPARATOR ":" #define ENV_SEPARATOR_CHAR ':' #define _CRTIMP #endif #include SYSTEM_INCLUDE_FILE #include MACHINE_INCLUDE_FILE #if defined(HAVE_NLIST) && defined(STRUCT_NLIST_HAS_N_VALUE) && !defined(DONT_USE_NLIST) #define CAN_USE_NLIST #endif