XCOMM $XConsortium: XF86Conf.cpp,v 1.5 95/01/16 13:16:10 kaleb Exp $ XCOMM $XFree86: xc/programs/Xserver/hw/xfree86/XF86Conf.cpp,v 3.10 1995/01/11 03:46:15 dawes Exp $ XCOMM XCOMM Copyright (c) 1994 by The XFree86 Project, Inc. XCOMM XCOMM Permission is hereby granted, free of charge, to any person obtaining a XCOMM copy of this software and associated documentation files (the "Software"), XCOMM to deal in the Software without restriction, including without limitation XCOMM the rights to use, copy, modify, merge, publish, distribute, sublicense, XCOMM and/or sell copies of the Software, and to permit persons to whom the XCOMM Software is furnished to do so, subject to the following conditions: XCOMM XCOMM The above copyright notice and this permission notice shall be included in XCOMM all copies or substantial portions of the Software. XCOMM XCOMM THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR XCOMM IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, XCOMM FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL XCOMM THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, XCOMM WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF XCOMM OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE XCOMM SOFTWARE. XCOMM XCOMM Except as contained in this notice, the name of the XFree86 Project shall XCOMM not be used in advertising or otherwise to promote the sale, use or other XCOMM dealings in this Software without prior written authorization from the XCOMM XFree86 Project. XCOMM XCOMM ********************************************************************** XCOMM Refer to the XF86Config(4/5) man page for details about the format of XCOMM this file. This man page is installed as MANPAGE XCOMM ********************************************************************** XCOMM ********************************************************************** XCOMM Files section. This allows default font and rgb paths to be set XCOMM ********************************************************************** Section "Files" XCOMM The location of the RGB database. Note, this is the name of the XCOMM file minus the extension (like ".txt" or ".db"). There is normally XCOMM no need to change the default. RgbPath RGBPATH XCOMM Multiple FontPath entries are allowed (which are concatenated together), XCOMM as well as specifying multiple comma-separated entries in one FontPath XCOMM command (or a combination of both methods) FontPath MISCFONTPATH USE_T1FONTS T1FONTPATH USE_SPFONTS SPFONTPATH USE_75FONTS DPI75FONTPATH USE_100FONTS DPI100FONTPATH EndSection XCOMM ********************************************************************** XCOMM Server flags section. XCOMM ********************************************************************** Section "ServerFlags" XCOMM Uncomment this to cause a core dump at the spot where a signal is XCOMM received. This may leave the console in an unusable state, but may XCOMM provide a better stack trace in the core dump to aid in debugging XCOMM NoTrapSignals XCOMM Uncomment this to disable the server abort sequence XCOMM This allows clients to receive this key event. XCOMM DontZap XCOMM Uncomment this to disable the / mode switching XCOMM sequences. This allows clients to receive these key events. XCOMM DontZoom EndSection XCOMM ********************************************************************** XCOMM Input devices XCOMM ********************************************************************** XCOMM ********************************************************************** XCOMM Keyboard section XCOMM ********************************************************************** Section "Keyboard" Protocol "Standard" XCOMM when using XQUEUE, comment out the above line, and uncomment the XCOMM following line XCOMM Protocol "Xqueue" AutoRepeat 500 5 XCOMM Let the server do the NumLock processing. This should only be required XCOMM when using pre-R6 clients XCOMM ServerNumLock XCOMM Specifiy which keyboard LEDs can be user-controlled (eg, with xset(1)) XCOMM Xleds 1 2 3 XCOMM To set the LeftAlt to Meta, RightAlt key to ModeShift, XCOMM RightCtl key to Compose, and ScrollLock key to ModeLock: XCOMM LeftAlt Meta XCOMM RightAlt ModeShift XCOMM RightCtl Compose XCOMM ScrollLock ModeLock EndSection XCOMM ********************************************************************** XCOMM Pointer section XCOMM ********************************************************************** Section "Pointer" Protocol "Microsoft" Device MOUSEDEV XCOMM When using XQUEUE, comment out the above two lines, and uncomment XCOMM the following line. XCOMM Protocol "Xqueue" XCOMM Baudrate and SampleRate are only for some Logitech mice XCOMM BaudRate 9600 XCOMM SampleRate 150 XCOMM Emulate3Buttons is an option for 2-button Microsoft mice XCOMM Emulate3Buttons XCOMM ChordMiddle is an option for some 3-button Logitech mice XCOMM ChordMiddle EndSection XCOMM ********************************************************************** XCOMM Monitor section XCOMM ********************************************************************** XCOMM Any number of monitor sections may be present Section "Monitor" Identifier "Generic Monitor" VendorName "Unknown" ModelName "Unknown" XCOMM Bandwidth is in MHz unless units are specified Bandwidth 25.2 XCOMM HorizSync is in kHz unless units are specified. XCOMM HorizSync may be a comma separated list of discrete values, or a XCOMM comma separated list of ranges of values. XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S XCOMM USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 # typical for a single frequency fixed-sync monitor XCOMM HorizSync 30-64 # multisync XCOMM HorizSync 31.5, 35.2 # multiple fixed sync frequencies XCOMM HorizSync 15-25, 30-50 # multiple ranges of sync frequencies XCOMM VertRefresh is in Hz unless units are specified. XCOMM VertRefresh may be a comma separated list of discrete values, or a XCOMM comma separated list of ranges of values. XCOMM NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S XCOMM USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 60 # typical for a single frequency fixed-sync monitor XCOMM VertRefresh 50-100 # multisync XCOMM VertRefresh 60, 65 # multiple fixed sync frequencies XCOMM VertRefresh 40-50, 80-100 # multiple ranges of sync frequencies XCOMM Modes can be specified in two formats. A compact one-line format, or XCOMM a multi-line format. XCOMM A generic VGA 640x480 mode (hsync = 31.5kHz, refresh = 60Hz) XCOMM These two are equivalent XCOMM ModeLine "640x480" 25.175 640 664 760 800 480 491 493 525 Mode "640x480" DotClock 25.175 HTimings 640 664 760 800 VTimings 480 491 493 525 EndMode XCOMM These two are equivalent XCOMM ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace XCOMM Mode "1024x768i" XCOMM DotClock 45 XCOMM HTimings 1024 1048 1208 1264 XCOMM VTimings 768 776 784 817 XCOMM Flags "Interlace" XCOMM EndMode EndSection XCOMM ********************************************************************** XCOMM Graphics device section XCOMM ********************************************************************** XCOMM Any number of graphics device sections may be present Section "Device" Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset "generic" XCOMM VideoRam 256 XCOMM Clocks 25.2 28.3 EndSection Section "Device" # SVGA server auto-detected chipset Identifier "Generic SVGA" VendorName "Unknown" BoardName "Unknown" EndSection XCOMM Section "Device" XCOMM Identifier "Any Trident TVGA 9000" XCOMM VendorName "Trident" XCOMM BoardName "TVGA 9000" XCOMM Chipset "tvga9000" XCOMM VideoRam 512 XCOMM Clocks 25 28 45 36 57 65 50 40 25 28 0 45 72 77 80 75 XCOMM EndSection XCOMM Section "Device" XCOMM Identifier "Actix GE32+ 2MB" XCOMM VendorName "Actix" XCOMM BoardName "GE32+" XCOMM Ramdac "ATT20C490" XCOMM Dacspeed 110 XCOMM Option "dac_8_bit" XCOMM Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0 XCOMM Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0 XCOMM EndSection XCOMM ********************************************************************** XCOMM Screen sections XCOMM ********************************************************************** XCOMM The colour SVGA server Section "Screen" Driver "svga" Device "Generic SVGA" Monitor "Generic Monitor" Subsection "Display" Depth 8 Modes "640x480" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection XCOMM The 16-colour VGA server Section "Screen" Driver "vga16" Device "Generic VGA" Monitor "Generic Monitor" Subsection "Display" Modes "640x480" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection XCOMM The Mono server Section "Screen" Driver "vga2" Device "Generic VGA" Monitor "Generic Monitor" Subsection "Display" Modes "640x480" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection XCOMM The accelerated servers (S3, Mach32, Mach8, 8514, P9000, AGX, W32) XCOMM Section "Screen" XCOMM Driver "accel" XCOMM Device "Actix GE32+ 2MB" XCOMM Monitor "Generic Monitor" XCOMM Subsection "Display" XCOMM Depth 8 XCOMM Modes "640x480" XCOMM ViewPort 0 0 XCOMM Virtual 1280 1024 XCOMM EndSubsection XCOMM SubSection "Display" XCOMM Depth 16 XCOMM Weight 565 XCOMM Modes "640x480" XCOMM ViewPort 0 0 XCOMM Virtual 1024 768 XCOMM EndSubsection XCOMM EndSection