#!/bin/sh
# This is a shell archive (produced by shar 3.49)
# To extract the files from this archive, save it to a file, remove
# everything above the "!/bin/sh" line above, and type "sh file_name".
#
# made 10/02/1993 09:11 UTC by root@gamma
# Source directory /home1/tmp/x11r5
#
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/dmmap.shar,v 3.0 1994/06/05 05:57:02 dawes Exp $
#
# existing files will NOT be overwritten unless -c is specified
#
# This shar contains:
# length  mode       name
# ------ ---------- ------------------------------------------
#    822 -r--r----- dmmap-1.0/Makefile
#   2560 -r--r----- dmmap-1.0/README
#   1139 -r--r----- dmmap-1.0/COPYING
#    273 -r--r----- dmmap-1.0/version.h
#   2413 -r--r----- dmmap-1.0/dmmap.c
#     24 -r--r----- dmmap-1.0/conf/System
#     29 -r--r----- dmmap-1.0/conf/Master
#     16 -r--r----- dmmap-1.0/conf/Node
#    631 -r-xr-xr-x dmmap-1.0/conf/install
#     85 -r--r----- dmmap-1.0/test/Makefile
#   2384 -r--r----- dmmap-1.0/test/tst_dmmap.c
#
# ============= dmmap-1.0/Makefile ==============
if test ! -d 'dmmap-1.0'; then
    echo 'x - creating directory dmmap-1.0'
    mkdir 'dmmap-1.0'
fi
if test -f 'dmmap-1.0/Makefile' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/Makefile (File already exists)'
else
echo 'x - extracting dmmap-1.0/Makefile (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/Makefile' &&
X
DISTDIR = dmmap-1.0
BINDIST = $(DISTDIR).btz
SRCDIST = $(DISTDIR).stz
DRIVER  = dmmap.o
TEST    = test/tst_dmmap
DISTFIL = README COPYING conf/install conf/System conf/Master conf/Node $(TEST)
DISTSRC = Makefile README COPYING version.h dmmap.c conf \
X			test/Makefile test/tst_dmmap.c
X
CFLAGS = -D_INKERNEL=1 -D_COMPAT322=1
X
all: $(DRIVER) $(TEST)
X
install: $(DISTDIR)
X	cd $(DISTDIR); ./install
X
dist: bin-dist src-dist
X
bin-dist: $(DISTDIR)
X	tar cvf - $(DISTDIR) | gzip -9 > $(BINDIST)
X
src-dist:
X	tar cvf - $(DISTSRC) | gzip -9 > $(SRCDIST)
X
clean:
X	rm -f *.o
X	rm -f $(BINDIST)
X	rm -f $(SRCDIST)
X	rm -rf $(DISTDIR)
X	cd test; make clean
X
$(TEST): $(TEST).c
X	cd test; $(MAKE) $(MAKEARGS)
X
$(DISTDIR): $(DRIVER) $(DISTFIL)
X	rm -rf $(DISTDIR)
X	mkdir $(DISTDIR)
X	cp $(DISTFIL) $(DISTDIR)
X	cp $(DRIVER) $(DISTDIR)/Driver.o
X
SHAR_EOF
chmod 0440 dmmap-1.0/Makefile ||
echo 'restore of dmmap-1.0/Makefile failed'
Wc_c="`wc -c < 'dmmap-1.0/Makefile'`"
test 822 -eq "$Wc_c" ||
	echo 'dmmap-1.0/Makefile: original size 822, current size' "$Wc_c"
fi
# ============= dmmap-1.0/README ==============
if test -f 'dmmap-1.0/README' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/README (File already exists)'
else
echo 'x - extracting dmmap-1.0/README (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/README' &&
X                 The DMMAP Driver
X
Contents:
1. General.
2. Installation.
3. Removal.
4. Testing.
5. Using the driver.
6. Limitations.
X
X
1. General
X
The "dmmap" driver is a generic video mapping driver for SCO unix.  It differs
from the standard SCO video mapping in that it allows you to map memory above
1Mb and memory not usually associated with the current video card.  This
allows the user to map linear frame buffers into user space.  It can only
be accessed by root to limit security problems.
X
The distribution comes in two files,
X
X	dmmap-XX.btz, the binary files required to install and test dmmap
X	dmmap-XX.stz, the source for dmmap and test program(s)
X
To extract one of these files use the following command,
X
X	gunzip < dmmap-XX.?tz | tar xvf -
X
For information on copyright and copying see the file COPYING that appears in
this package.
X
2. Installation
X
To install the dmmap driver, extract the dmmap.tar file somewhere
convenient, then run "install" as root.  The "install" script will take it
from there.  If building from source, type 'make install' as root.
X
3. Removal
X
To remove the dmmap driver follow these steps:
X
X	login as root
X	cd /etc/conf/bin
X	./idinstall -d dmmap
X	./idbuild
X
4. Testing
X
A simple test program, "tst_dmmap" is provided with the driver.  After the
kernel is built and you have rebooted confirm the installation of the
driver by running "tst_dmmap".  It will do a simple test by mapping in the
bios rom and checksumming it.  If you have a bios at address 0xf0000 it
will display the first 20 characters from the bios.
X
5. Using the driver
X
dmmap accepts two ioctls, KDMAPDISP and KDUNMAPDISP, both of which require
as an argument a pointer to a completed "kd_memloc" stucture.  A special
ioctl of '-1' will return the version number of scmap you are running.
A sample of code to map and unmap some memory follows below.  For more
detail see "test/tst_dmmap.c".
X
X	.
X	.
X	.
X
X	struct kd_memloc memloc;
X
X	if ((fd = open("/dev/dmmap", O_RDWR)) < 0)
X		exit(0);
X
X	memloc.vaddr    = NULL;
X	memloc.physaddr = 0xf0000;
X	memloc.length   = 0x10000
X
X	if (ioctl(fd, KDMAPDISP, &memloc) < 0) {
X		perror("KDMAPDISP");
X		exit(1);
X	}
X
X	printf("The first byte of 0x%x is 0x%02x\n", memloc.vaddr, *memloc.vaddr);
X
X	if (ioctl(fd, KDUNMAPDISP, &memloc) < 0) {
X		perror("KDMAPDISP");
X		exit(1);
X	}
X
X	.
X	.
X	.
X
6. Limitations
X
Currently this driver can only map in at most 4Mb of memory.  This is not
about to change as vasmalloc can only handle that much.  It may be possible
to rewrite vasmalloc but thats not going to happen any time soon.
X
SHAR_EOF
chmod 0440 dmmap-1.0/README ||
echo 'restore of dmmap-1.0/README failed'
Wc_c="`wc -c < 'dmmap-1.0/README'`"
test 2560 -eq "$Wc_c" ||
	echo 'dmmap-1.0/README: original size 2560, current size' "$Wc_c"
fi
# ============= dmmap-1.0/COPYING ==============
if test -f 'dmmap-1.0/COPYING' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/COPYING (File already exists)'
else
echo 'x - extracting dmmap-1.0/COPYING (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/COPYING' &&
X
Copyright 1993 by David McCullough <davidm@stallion.oz.au>
X
Permission to use, copy, modify, distribute, and sell this software and its
documentation for any purpose is hereby granted without fee, provided that
the above copyright notice appear in all copies and that both that
copyright notice and this permission notice appear in supporting
documentation, and that the name of David McCullough not be used in
advertising or publicity pertaining to distribution of the software without
specific, written prior permission.  David McCullough makes no representations
about the suitability of this software for any purpose.  It is provided "as is"
without express or implied warranty.
X
DAVID MCCULLOUGH DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT
SHALL DAVID MCCULLOUGH BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
X
SHAR_EOF
chmod 0440 dmmap-1.0/COPYING ||
echo 'restore of dmmap-1.0/COPYING failed'
Wc_c="`wc -c < 'dmmap-1.0/COPYING'`"
test 1139 -eq "$Wc_c" ||
	echo 'dmmap-1.0/COPYING: original size 1139, current size' "$Wc_c"
fi
# ============= dmmap-1.0/version.h ==============
if test -f 'dmmap-1.0/version.h' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/version.h (File already exists)'
else
echo 'x - extracting dmmap-1.0/version.h (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/version.h' &&
#ifndef DMMAP_VERSION_H
#define DMMAP_VERSION_H 1
/******************************************************************************/
X
#define DMMAP_VERSION		0x0100
X
/******************************************************************************/
#endif /* DMMAP_VERSION_H */
SHAR_EOF
chmod 0440 dmmap-1.0/version.h ||
echo 'restore of dmmap-1.0/version.h failed'
Wc_c="`wc -c < 'dmmap-1.0/version.h'`"
test 273 -eq "$Wc_c" ||
	echo 'dmmap-1.0/version.h: original size 273, current size' "$Wc_c"
fi
# ============= dmmap-1.0/dmmap.c ==============
if test -f 'dmmap-1.0/dmmap.c' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/dmmap.c (File already exists)'
else
echo 'x - extracting dmmap-1.0/dmmap.c (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/dmmap.c' &&
/******************************************************************************/
/*
X *	Copyright 1993 by David McCullough <davidm@stallion.oz.au>
X *	    see file COPYING for more details.
X */
/******************************************************************************/
X
#include	<sys/types.h>
#include	<sys/errno.h>
#include	<sys/param.h>
#include	<sys/dir.h>
#include	<sys/user.h>
#include	<sys/vtkd.h>
#include	<sys/immu.h>
X
#include	"version.h"
X
/******************************************************************************/
X
extern int		vasbind(paddr_t, caddr_t, unsigned int);
extern caddr_t	vasmalloc(paddr_t, unsigned int);
extern caddr_t	vasmapped(paddr_t, unsigned int);
extern int		vasunbind(caddr_t, unsigned int);
X
/******************************************************************************/
X
int dmapioctl(dev, cmd, arg)
X    int dev;
X    int cmd;
X    int arg;
{
X	struct kd_memloc	memloc;
X
X	if (!suser()) {
X		u.u_error = EPERM;
X		return(0);
X	}
X	
X	switch (cmd) {
X	default:
X		u.u_error = EINVAL;
X		break;
X
X	case -1: /* saves anyone using header files that aren't part of the OS */
X		u.u_rval1 = DMMAP_VERSION;
X		break;
X
X	case KDMAPDISP:
X		if (copyin((caddr_t) arg, &memloc, sizeof(memloc)) == -1) {
X			u.u_error = EFAULT;
X			break;
X		}
/*
X *		arg checking.
X *		mapping to a provided memory addr not supported yet 8)
X *		when it is, vaddr must be below KVBASE, and we don't do the
X *		vasmalloc or the vasmapped checks quite the same way.
X */
X		if (memloc.vaddr || memloc.length <= 0 || !memloc.physaddr) {
X			u.u_error = EINVAL;
X			break;
X		}
X
X		if (memloc.vaddr = vasmapped((paddr_t) memloc.physaddr, memloc.length))
X			break;
X
X		if (!(memloc.vaddr = vasmalloc((paddr_t)memloc.physaddr,memloc.length)))
X			break;
X
X		if (vasbind((paddr_t) memloc.physaddr,memloc.vaddr,memloc.length) == -1)
X			break;
X
X		if (copyout(&memloc, arg, sizeof(memloc)) == -1) {
X			u.u_error = EFAULT;
X			break;
X		}
X		break;
X
X	case KDUNMAPDISP:
X		if (copyin((caddr_t) arg, &memloc, sizeof(memloc)) == -1) {
X			u.u_error = EFAULT;
X			break;
X		}
X
X		if (!memloc.vaddr || memloc.length <= 0 || !memloc.physaddr) {
X			u.u_error = EINVAL;
X			break;
X		}
X
X		if (memloc.vaddr != vasmapped((paddr_t)memloc.physaddr,memloc.length)) {
X			u.u_error = ENXIO;
X			break;
X		}
X
X		if (vasunbind(memloc.vaddr, memloc.length) == -1)
X			break;
X		break;
X	}
}
X
/******************************************************************************/
SHAR_EOF
chmod 0440 dmmap-1.0/dmmap.c ||
echo 'restore of dmmap-1.0/dmmap.c failed'
Wc_c="`wc -c < 'dmmap-1.0/dmmap.c'`"
test 2413 -eq "$Wc_c" ||
	echo 'dmmap-1.0/dmmap.c: original size 2413, current size' "$Wc_c"
fi
# ============= dmmap-1.0/conf/System ==============
if test ! -d 'dmmap-1.0/conf'; then
    echo 'x - creating directory dmmap-1.0/conf'
    mkdir 'dmmap-1.0/conf'
fi
if test -f 'dmmap-1.0/conf/System' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/conf/System (File already exists)'
else
echo 'x - extracting dmmap-1.0/conf/System (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/conf/System' &&
dmmap	Y	0	0	0	0	0	0	0	0
SHAR_EOF
chmod 0440 dmmap-1.0/conf/System ||
echo 'restore of dmmap-1.0/conf/System failed'
Wc_c="`wc -c < 'dmmap-1.0/conf/System'`"
test 24 -eq "$Wc_c" ||
	echo 'dmmap-1.0/conf/System: original size 24, current size' "$Wc_c"
fi
# ============= dmmap-1.0/conf/Master ==============
if test -f 'dmmap-1.0/conf/Master' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/conf/Master (File already exists)'
else
echo 'x - extracting dmmap-1.0/conf/Master (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/conf/Master' &&
dmmap	i	ico		dmap	0	0	0	1	-1
SHAR_EOF
chmod 0440 dmmap-1.0/conf/Master ||
echo 'restore of dmmap-1.0/conf/Master failed'
Wc_c="`wc -c < 'dmmap-1.0/conf/Master'`"
test 29 -eq "$Wc_c" ||
	echo 'dmmap-1.0/conf/Master: original size 29, current size' "$Wc_c"
fi
# ============= dmmap-1.0/conf/Node ==============
if test -f 'dmmap-1.0/conf/Node' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/conf/Node (File already exists)'
else
echo 'x - extracting dmmap-1.0/conf/Node (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/conf/Node' &&
dmmap	dmmap	c	0
SHAR_EOF
chmod 0440 dmmap-1.0/conf/Node ||
echo 'restore of dmmap-1.0/conf/Node failed'
Wc_c="`wc -c < 'dmmap-1.0/conf/Node'`"
test 16 -eq "$Wc_c" ||
	echo 'dmmap-1.0/conf/Node: original size 16, current size' "$Wc_c"
fi
# ============= dmmap-1.0/conf/install ==============
if test -f 'dmmap-1.0/conf/install' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/conf/install (File already exists)'
else
echo 'x - extracting dmmap-1.0/conf/install (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/conf/install' &&
: !/bin/sh
#
# installation script for dmmap driver
#
X
if id | grep root > /dev/null 2>&1
then
X	:
else
X	echo "Please run this script as root" >&2
X	exit 1
fi
X
if /etc/conf/bin/idinstall -s -g dmmap > /dev/null 2>&1
then
X	echo "Updating existing dmmap driver ..."
X	/etc/conf/bin/idinstall -k -u dmmap
else
X	echo "Installing dmmap driver ..."
X	/etc/conf/bin/idinstall -k -a dmmap
fi
X
echo "Do you wish to re-link the kernel now (y/n)[y]: \c"
read t
case ${t:-y} in
[yY]|[yY][eE][sS])
X	cd /etc/conf/bin;
X	./idbuild
X	;;
*)
X	echo "\n\nWarning!"
X	echo "\nYou must re-link the the kernel in order to use the dmmap driver"
X	;;
esac
X
Xexit 0
SHAR_EOF
chmod 0555 dmmap-1.0/conf/install ||
echo 'restore of dmmap-1.0/conf/install failed'
Wc_c="`wc -c < 'dmmap-1.0/conf/install'`"
test 631 -eq "$Wc_c" ||
	echo 'dmmap-1.0/conf/install: original size 631, current size' "$Wc_c"
fi
# ============= dmmap-1.0/test/Makefile ==============
if test ! -d 'dmmap-1.0/test'; then
    echo 'x - creating directory dmmap-1.0/test'
    mkdir 'dmmap-1.0/test'
fi
if test -f 'dmmap-1.0/test/Makefile' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/test/Makefile (File already exists)'
else
echo 'x - extracting dmmap-1.0/test/Makefile (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/test/Makefile' &&
X
CFLAGS = -D_INKERNEL=1 -D_COMPAT322=1
X
all: tst_dmmap
X
clean:
X	rm -f *.o tst_dmmap
X
SHAR_EOF
chmod 0440 dmmap-1.0/test/Makefile ||
echo 'restore of dmmap-1.0/test/Makefile failed'
Wc_c="`wc -c < 'dmmap-1.0/test/Makefile'`"
test 85 -eq "$Wc_c" ||
	echo 'dmmap-1.0/test/Makefile: original size 85, current size' "$Wc_c"
fi
# ============= dmmap-1.0/test/tst_dmmap.c ==============
if test -f 'dmmap-1.0/test/tst_dmmap.c' -a X"$1" != X"-c"; then
	echo 'x - skipping dmmap-1.0/test/tst_dmmap.c (File already exists)'
else
echo 'x - extracting dmmap-1.0/test/tst_dmmap.c (Text)'
sed 's/^X//' << 'SHAR_EOF' > 'dmmap-1.0/test/tst_dmmap.c' &&
/******************************************************************************/
/*
X *	Copyright 1993 by David McCullough <davidm@stallion.oz.au>
X *	    see file COPYING for more details.
X */
/******************************************************************************/
X
#include	<stdio.h>
#include	<fcntl.h>
#include	<errno.h>
#include	<ctype.h>
#include	<sys/types.h>
#include	<sys/vtkd.h>
X
/******************************************************************************/
X
hex_dump(s, n)
X	unsigned char	*s;
X	unsigned int	 n;
{
X	int				 i, j;
X
X	for (i = 0; i < n; i += 16) {
X		printf("%08x: ", s + i);
X		for (j = 0; j < 8; j++)
X			if (i + j < n)
X				printf("%02x ", s[i + j]);
X			else
X				printf("   ");
X		printf("  ");
X		for (; j < 16; j++)
X			if (i + j < n)
X				printf("%02x ", s[i + j]);
X			else
X				printf("   ");
X		printf("  ");
X		for (j = 0; j < 16; j++)
X			printf("%c", (i+j < n && isprint(s[i + j])) ? s[i+j] : '.');
X		printf("\n");
X	}
}
X
/******************************************************************************/
X
main(argc, argv)
X	int					 argc;
X	char				*argv[];
{
X	int					 fd, ver;
X	struct kd_memloc	 memloc;
X
X	if (argc != 1 && argc != 3) {
X		fprintf(stderr, "usage: %s [physaddr length]\n", argv[0]);
X		exit(1);
X	}
X
X	if ((fd = open("/dev/dmmap", O_RDWR)) < 0) {
X		fprintf(stderr, "Cannot open /dev/dmmap : %s\n", sys_errlist[errno]);
X		exit(1);
X	}
X
X	if ((ver = ioctl(fd, -1)) < 0) {
X		perror("Failed to get version");
X		exit(1);
X	}
X
X	printf("dmmap version 0x%04x\n", ver);
X
X	memloc.vaddr    = NULL;				/* this must be NULL for now */
X	if (argc == 1) {
X		memloc.physaddr = (char *) 0xf0000;	/* common bios location */
X		memloc.length   = 32;				/* map only 32 bytes by default */
X	} else {
X		if (sscanf(argv[1], "%i", &memloc.physaddr) != 1) {
X			fprintf(stderr, "physaddr is not a valid number!\n");
X			exit(1);
X		}
X		if (sscanf(argv[2], "%i", &memloc.length) != 1) {
X			fprintf(stderr, "length is not a valid number!\n");
X			exit(1);
X		}
X	}
X
X	printf("mapping %d bytes at physical address 0x%x\n", memloc.length,
X			memloc.physaddr);
X
X	if (ioctl(fd, KDMAPDISP, &memloc) < 0) {
X		perror("KDMAPDISP failed");
X		exit(1);
X	}
X
X	hex_dump(memloc.vaddr, memloc.length);
X
X	if (ioctl(fd, KDUNMAPDISP, &memloc) < 0) {
X		perror("KDUNMAPDISP failed");
X		exit(1);
X	}
X
X	close(fd);
X	exit(0);
}
X
/******************************************************************************/
SHAR_EOF
chmod 0440 dmmap-1.0/test/tst_dmmap.c ||
echo 'restore of dmmap-1.0/test/tst_dmmap.c failed'
Wc_c="`wc -c < 'dmmap-1.0/test/tst_dmmap.c'`"
test 2384 -eq "$Wc_c" ||
	echo 'dmmap-1.0/test/tst_dmmap.c: original size 2384, current size' "$Wc_c"
fi
exit 0
