<html><head><meta name="color-scheme" content="light dark"></head><body><pre style="word-wrap: break-word; white-space: pre-wrap;">	This document describes the routines that make up the Kerberos
V5 application programming interface.  It is geared towards
programmers who already have a basic familiarity with Kerberos and are
in the process of including Kerberos authentication as part of 
applications being developed.

	The function descriptions included are up to date, even if the
description of the functions may be hard to understand for the novice
Kerberos programmer.

\subsection{Acknowledgments}


The Kerberos model is based in part on Needham and Schroeder's trusted
third-party authentication protocol and on modifications suggested by
Denning and Sacco.  The original design and implementation of Kerberos
Versions 1 through 4 was the work of Steve Miller of Digital Equipment
Corporation and Clifford Neuman (now at the Information Sciences
Institute of the University of Southern California), along with Jerome
Saltzer, Technical Director of Project Athena, and Jeffrey Schiller,
MIT Campus Network Manager.  Many other members of Project Athena have
also contributed to the work on Kerberos.  Version 4 is publicly
available, and has seen wide use across the Internet.

Version 5 (described in this document) has evolved from Version 4 based
on new requirements and desires for features not available in Version 4.

%nlg- a bunch more probably needs to be added here to credit all
%those that have contributed to V5 -nlg

\subsection{Kerberos Basics}

Kerberos performs authentication as a trusted third-party
authentication service by using conventional (shared secret
key\footnote{ {\em Secret} and {\em private} are often used
interchangeably in the literature.  In our usage, it takes two (or
more) to share a secret, thus a shared DES key is a {\em secret} key.
Something is only private when no one but its owner knows it.  Thus,
in public key cryptosystems, one has a public and a {\em private} key.
}) cryptography.  Kerberos provides a means of verifying the
identities of principals, without relying on authentication by the
host operating system, without basing trust on host addresses, without
requiring physical security of all the hosts on the network, and under
the assumption that packets traveling along the network can be read,
modified, and inserted at will.

When integrating Kerberos into an application it is important to
review how and when Kerberos functions are used to ensure that the
application's design does not compromise the authentication.  For
instance, an application which uses Kerberos' functions only upon the
{\em initiation} of a stream-based network connection, and assumes the
absence of any active attackers who might be able to ``hijack'' the
stream connection.

%{\Huge nlg- It would be nice to include more examples here of common
%mistakes one can make in designing kerberized systems -nlg}

The Kerberos protocol code libraries, whose API is described in this
document, can be used to provide encryption to any application.  In
order to add authentication to its transactions, a typical network
application adds one or two calls to the Kerberos library, which
results in the transmission of the necessary messages to achieve
authentication.

The two methods for obtaining credentials, the initial ticket exchange
and the ticket granting ticket exchange, use slightly different
protocols and require different API routines.  The basic difference an
API programmer will see is that the initial request does not require a
ticket granting ticket (TGT) but does require the client's secret key
because the reply is sent back encrypted in the client's secret key.
Usually this request is for a TGT and TGT based exchanges are used
from then on.  In a TGT exchange the TGT is sent as part of the
request for tickets and the reply is encrypted in the session key from
the TGT.  For example, once a user's password is used to obtain a TGT,
it is not required for subsequent TGT exchanges.

The reply consists of a ticket and a session key, encrypted either in
the user's secret key (i.e., password), or the TGT session key.  The
combination of a ticket and a session key is known as a set of {\em
credentials}.\footnote{In Kerberos V4, the ``ticket file'' was a bit of
a misnomer, since it contained both tickets and their associated session
keys.  In Kerberos V5, the ``ticket file'' has been renamed to be the
{\em credentials cache}.} An application client can use these
credentials to authenticate to the application server by sending the
ticket and an {\em authenticator} to the server.  The authenticator is
encrypted in the session key of the ticket, and contains the name of the
client, the name of the server, the time the authenticator was created.

In order to verify the authentication, the application server decrypts
the ticket using its service key, which is only known by the application
server and the Kerberos server.  Inside the ticket, the Kerberos server
had placed the name of the client, the name of the server, a DES key
associated with this ticket, and some additional information.  The
application server then uses the ticket session key to decrypt the
authenticator, and verifies that the information in the authenticator
matches the information in the ticket, and that the timestamp in the
authenticator is recent (to prevent reply attacks).  Since the session
key was generated randomly by the Kerberos server, and delivered only
encrypted in the service key, and in a key known only by the user, the
application server can be confident that user is really who he or she
claims to be, by virtue of the fact that the user was able to encrypt
the authenticator in the correct key.

To provide detection of both replay
attacks and message stream modification attacks, the integrity of all
the messages exchanged between principals can also be 
guar\-an\-teed\footnote{Using
\funcname{krb5_mk_safe} and \funcname{krb5_rd_safe} to create and
verify KRB5_SAFE messages} by generating and transmitting a
collision-proof checksum\footnote{aka cryptographic checksum,
elsewhere this is called a hash or digest function} of the client's
message, keyed with the session key.  Privacy and integrity of the
messages exchanged between principals can be secured\footnote{Using
\funcname{krb5_mk_priv} and \funcname{krb5_rd_priv} to create and
verify KRB5_PRIV messages} by encrypting the data to be passed using
the session key.

\subsubsection{The purpose of Realms}

The Kerberos protocol is designed to operate across organizational
boundaries.   Each organization wishing to run a Kerberos
server establishes its own {\em realm}.  The name of the realm in which a
client is registered is part of the client's name, and can be used by the
end-service to decide whether to honor a request.

By establishing {\em inter-realm} keys, the administrators of two
realms can allow a client authenticated in the local realm to use its
credentials remotely.  The exchange of inter-realm keys (a separate
key may be used for each direction) registers the ticket-granting
service of each realm as a principal in the other realm.  A client is
then able to obtain a ticket-granting ticket for the remote realm's
ticket-granting service from its local realm.  When that
ticket-granting ticket is used, the remote ticket-granting service
uses the inter-realm key (which usually differs from its own normal
TGS key) to decrypt the ticket-granting ticket, and is thus certain
that it was issued by the client's own TGS. Tickets issued by the
remote ticket-granting service will indicate to the end-service that
the client was authenticated from another realm.   


This method can be repeated to authenticate throughout an organization
across multiple realms.  To build a valid authentication
path\footnote{An {\em authentication path} is the sequence of
intermediate realms that are transited in communicating from one realm
to another.} to a distant realm, the local realm must share an
inter-realm key with an intermediate realm which
communicates\footnote{A realm is said to {\em communicate} with
another realm if the two realms share an inter-realm key} with either
the distant remote realm or yet another intermediate realm.

Realms are typically organized hierarchically.  Each realm shares a
key with its parent and a different key with each child.  If an
inter-realm key is not directly shared by two realms, the hierarchical
organization allows an authentication path to be easily constructed.
If a hierarchical organization is not used, it may be necessary to
consult some database in order to construct an authentication path
between realms.

Although realms are typically hierarchical, intermediate realms may be
bypassed to achieve cross-realm authentication through alternate
authentication paths\footnote{These might be established to make communication
between two realms more efficient}.  It is important for the
end-service to know which realms were transited when deciding how much
faith to place in the authentication process.  To facilitate this
decision, a field in each ticket contains the names of the realms that
were involved in authenticating the client.

\subsubsection{Fundamental assumptions about the environment}

Kerberos has certain limitations that should be kept in mind when
designing security measures:

\begin{itemize}
\item
Kerberos does not address ``Denial of service'' attacks.  There are
places in these protocols where an intruder can prevent an application
from participating in the proper authentication steps.  Detection and
solution of such attacks (some of which can appear to be not-uncommon
``normal'' failure modes for the system) is usually best left to
the human administrators and users.

\item
Principals must keep their secret keys secret.  If an intruder somehow
steals a principal's key, it will be able to masquerade as that
principal or impersonate any server to the legitimate principal.

\item
``Password guessing'' attacks are not solved by Kerberos.  If a user
chooses a poor password, it is possible for an attacker to
successfully mount an offline dictionary attack by repeatedly
attempting to decrypt, with successive entries from a dictionary,
messages obtained which are encrypted under a key derived from the
user's password.

\end{itemize}

\subsection{Glossary of terms}

Below is a list of terms used throughout this document.

\begin{description}
\item [Authentication] 
Verifying the claimed identity of a principal.

\item [Authentication header]
A record containing a Ticket and an Authenticator to be presented to a
server as part of the authentication process.

\item [Authentication path]
A sequence of intermediate realms transited in the authentication
process when communicating from one realm to another.

\item [Authenticator]
A record containing information that can be shown to
have been recently generated using the session key known only by the 
client and server.

\item [Authorization]
The process of determining whether a client may use a
service,  which objects the client is allowed to access, and the 
type of access allowed for each.

\item [Ciphertext]
The output of an encryption function.  Encryption transforms plaintext
into ciphertext.

\item [Client]
A process that makes use of a network service on behalf of a
user.  Note that in some cases a {\em Server} may itself be a client of
some other server (e.g. a print server may be a client of a file server).

\item [Credentials]
A ticket plus the secret session key necessary to
successfully use that ticket in an authentication exchange.

\item [KDC]
Key Distribution Center, a network service that supplies
tickets and temporary session keys; or an
instance of that service or the host on which it runs.
The KDC services both initial ticket and ticket-granting ticket
requests.
The initial ticket portion is sometimes referred to as the
Authentication Server (or service).
The ticket-granting ticket portion is sometimes referred to as the
ticket-granting server (or service).

\item [Kerberos]
Aside from the 3-headed dog guarding Hades, the name given
to Project Athena's authentication service, the protocol used by that
service, or the code used to implement the authentication service.

\item [Plaintext]
The input to an encryption function or the output of a decryption
function.  Decryption transforms ciphertext into plaintext.

\item [Principal]
A uniquely named client or server instance that participates in
a network communication.

\item [Principal identifier]
The name used to uniquely identify each different
principal.

\item [Seal]
To encipher a record containing several fields in such a way
that the fields cannot be individually replaced without either
knowledge of the encryption key or leaving evidence of tampering.

\item [Secret key]
An encryption key shared by a principal and the KDC,
distributed outside the bounds of the system, with a long lifetime.
In the case of a human user's principal, the secret key is derived from a
password.

\item [Server]
A particular Principal which provides a resource to network clients.

\item [Service]
A resource provided to network clients; often provided by more than one
server (for example, remote file service).

\item [Session key]
A temporary encryption key used between two principals,
with a lifetime limited to the duration of a single login
{\em session}.

\item [Sub-session key] 
A temporary encryption key used between two
principals, selected and exchanged by the principals using the session
key, and with a lifetime limited to the duration of a single
association.

\item [Ticket]
A record that helps a client authenticate itself to a server; it contains
the client's identity, a session key, a timestamp, and other
information, all sealed using the server's secret key.  It only serves to
authenticate a client when presented along with a fresh Authenticator.

\end{description}
</pre></body></html>