Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) John Linn Networking and Communications Architecture Digital Equipment Corporation 550 King Street, LKG1-2/A19 Littleton, MA 01460 Linn@erlang.enet.dec.com STATUS OF THIS MEMO This document is an Internet Draft. Internet Drafts are working documents of the Internet Engineering Task Force (IETF), its Areas, and its Working Groups. Note that other groups may also distribute working documents as Internet Drafts. Internet Drafts are draft documents valid for a maximum of six months. Internet Drafts may be updated, replaced, or obsoleted by other documents at any time. It is not appropriate to use Internet Drafts as reference material or to cite them other than as a "working draft" or "work in progress." Please check the I-D abstract listing contained in each Internet Draft directory to learn the current status of this or any other Internet Draft. 1 GSS-API Characteristics and Concepts This Generic Security Service Application Program Interface (GSS-API) definition provides security services to callers in a generic fashion, supportable with a range of underlying mecha- nisms and technologies and hence allowing source-level porta- bility of applications to different environments. This document defines GSS-API services and primitives at a level independent of underlying mechanism and programming language environment, and is to be complemented by other, related documents: o documents defining specific parameter bindings for particular language environments Document Expiration: 15 December 1992 1 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o documents defining token formats, protocols, and procedures to be implemented in order to realize GSS-API services atop particular security mechanisms The operational paradigm in which GSS-API operates (also sum- marized in Figure 1 in the graphic version of this document) is as follows. A typical GSS-API caller is itself a communi- cations protocol, calling on GSS-API in order to protect its communications with authentication, integrity, and/or confi- dentiality security services. A GSS-API caller accepts tokens provided to it by its local GSS-API implementation and trans- fers the tokens to a peer on a remote system; that peer passes the received tokens to its local GSS-API implementation for processing. The security services available through GSS-API in this fashion are implementable (and have been implemented) over a range of underlying mechanisms based on secret-key and public-key cryptographic technologies. The GSS-API separates the operations of initializing a security context between peers, achieving peer entity authentication[1] (GSS_Init_sec_context() and GSS_Accept_sec_context() calls), from the operations of providing per-message data origin au- thentication and data integrity protection (GSS_Sign() and GSS_ Verify() calls) for messages subsequently transferred in con- junction with that context. Per-message GSS_Seal() and GSS_ Unseal() calls provide the data origin authentication and data integrity services which GSS_Sign() and GSS_Verify() offer, and also support selection of confidentiality services as a caller option. Additional calls provide supportive functions to the GSS-API's users. ___________________ [1] This security service definition, and other definitions used in this document, corresponds to that provided in Interna- tional Standard ISO 7498-2-1988(E), Security Architecture. 2 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) In the graphic version of this document, Figure 2 illustrates the dataflows involved in use of the GSS-API by a client and server in a mechanism-independent fashion, establishing a secu- rity context and transferring a protected message. The example assumes that credential acquisition has already been completed. Only a subset of parameter and result values are illustrated, for reasons of clarity in exposition. The client calls GSS_Init_sec_context() to establish a security context to the server identified by targname, and elects to set the mutual_req_flag so that mutual authentication is performed in the course of context establishment. GSS_Init_sec_context() returns an output_token to be passed to the server, and in- dicates GSS_CONTINUE_NEEDED status pending completion of the mutual authentication sequence. Had mutual_req_flag not been set, the initial call to GSS_Init_sec_context() would have re- turned GSS_COMPLETE status. The client sends the output_token to the server. The server passes the received token as the input_token pa- rameter to GSS_Accept_sec_context(). GSS_Accept_sec_context indicates GSS_COMPLETE status, provides the client's authenti- cated identity in the srcname result, and provides an output_ token to be passed to the client. The server sends the output_ token to the client. The client passes the received token as the input_token pa- rameter to a successor call to GSS_Init_sec_context(), which processes data included in the token in order to achieve mu- tual authentication from the client's viewpoint. This call to GSS_Init_sec_context() returns GSS_COMPLETE status, indi- cating successful mutual authentication and completed context establishment. Document Expiration: 15 December 1992 3 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) The client generates a data message and passes it to GSS_ Seal(). GSS_Seal() performs data origin authentication, data integrity, and (optional) confidentiality processing on the mes- sage and encapsulates the result into output_message, indicating GSS_COMPLETE status. The client sends the output_message to the server. The server passes the received message to GSS_Unseal(). GSS_ Unseal inverts the encapsulation performed by GSS_Seal(), de- ciphers the message if optional confidentiality was applied, and validates the data origin authentication and data integrity checking quantities. GSS_Unseal() indicates successful valida- tion by returning GSS_COMPLETE status along with the resultant output_message. For purposes of this example, we assume that the server knows by out-of-band means that this context will have no further use after one protected message is transferred from client to server. Given this premise, the server now calls GSS_Delete_sec_ context() to flush context-level information. GSS_Delete_sec_ context returns a context_token for the server to pass to the client. The client passes the returned context_token to GSS_Process_ context_token(), which returns GSS_COMPLETE status after delet- ing context-level information at the client system. The GSS-API design assumes and addresses several basic goals, including: o Mechanism independence: The GSS-API defines an interface to cryptographically implemented strong authentication and other security services at a generic level which is inde- pendent of particular underlying mechanisms. For example, GSS-API-provided services can be implemented by secret-key technologies (e.g., Kerberos) or public-key approaches (e.g., X.509). 4 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o Protocol environment independence: The GSS-API is indepen- dent of the communications protocol suites with which it is employed, permitting use in a broad range of protocol en- vironments. In appropriate environments, an intermediate implementation "veneer" which is oriented to a particular communication protocol (e.g., Remote Procedure Call (RPC)) may be interposed between applications which call that proto- col and the GSS-API, thereby invoking GSS-API facilities in conjunction with that protocol's communications invocations. o Protocol association independence: The GSS-API's security context construct is independent of communications protocol association constructs. This characteristic allows a single GSS-API implementation to be utilized by a variety of in- voking protocol modules on behalf of those modules' calling applications. GSS-API services can also be invoked directly by applications, wholly independent of protocol associations. o Suitability to a range of implementation placements: GSS- API clients are not constrained to reside within any Trusted Computing Base (TCB) perimeter defined on a system where the GSS-API is implemented; security services are specified in a manner suitable to both intra-TCB and extra-TCB callers. 1.1 GSS-API Constructs This section describes basic elements comprising the GSS-API. 1.1.1 Credentials Credentials structures provide the prerequisites enabling peers to establish security contexts with each other. A caller may designate that its default credential be used for context es- tablishment calls without presenting an explicit handle to that credential. Alternately, those GSS-API callers which need to make explicit selection of particular credentials structures may make references to those credentials through GSS-API-provided credential handles ("cred_handles"). Document Expiration: 15 December 1992 5 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) A single credential structure may be used for initiation of outbound contexts and acceptance of inbound contexts. Callers needing to operate in only one of these modes may designate this fact when credentials are acquired for use, allowing underlying mechanisms to optimize their processing and storage require- ments. The credential elements defined by a particular mechanism may contain multiple cryptographic keys, e.g., to enable authen- tication and message encryption to be performed with different algorithms. A single credential structure may accommodate credential in- formation associated with multiple underlying mechanisms (mech_ types); a credential structure's contents will vary depending on the set of mech_types supported by a particular GSS-API im- plementation. Commonly, a single mech_type will be used for all security contexts established by a particular initiator to a particular target; the primary motivation for supporting cre- dential sets representing multiple mech_types is to allow ini- tiators on systems which are equipped to handle multiple types to initiate contexts to targets on other systems which can ac- commodate only a subset of the set supported at the initiator's system. It is the responsibility of underlying system-specific mech- anisms and OS functions below the GSS-API to ensure that the ability to acquire and use credentials associated with a given identity is constrained to appropriate processes within a sys- tem. This responsibility should be taken seriously by implemen- tors, as the ability for an entity to utilize a principal's cre- dentials is equivalent to the entity's ability to successfully assert that principal's identity. Once a set of GSS-API credentials is established, the transfer- ability of that credentials set to other processes or analogous constructs within a system is a local matter, not defined by the GSS-API. An example local policy would be one in which any cre- dentials received as a result of login to a given user account, or of delegation of rights to that account, are accessible by, or transferable to, processes running under that account. 6 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) The credential establishment process (particularly when per- formed on behalf of users rather than server processes) is likely to require access to passwords or other quantities which should be protected locally and exposed for the shortest time possible. As a result, it will often be appropriate for pre- liminary credential establishment to be performed through local means at user login time, with the result(s) cached for sub- sequent reference. These preliminary credentials would be set aside (in a system-specific fashion) for subsequent use, either: o to be accessed by an invocation of the GSS-API GSS_Acquire_ cred() call, returning an explicit handle to reference that credential o as the default credentials installed on behalf of a process 1.1.2 Tokens Tokens are data elements transferred between GSS-API callers, and are divided into two classes. Context-level tokens are ex- changed in order to establish and manage a security context between peers. Per-message tokens are exchanged in conjunction with an established context to provide protective security ser- vices for corresponding data messages. The internal contents of both classes of tokens are specific to the particular underlying mechanism used to support the GSS-API; Appendix B of this docu- ment provides a uniform recommendation for designers of GSS-API support mechanisms, encapsulating mechanism-specific information along with a globally-interpretable mechanism identifier. Tokens are opaque from the viewpoint of GSS-API callers. They are generated within the GSS-API implementation at an end sys- tem, provided to a GSS-API caller to be transferred to the peer GSS-API caller at a remote end system, and processed by the GSS-API implementation at that remote end system. Tokens may be output by GSS-API primitives (and are to be transferred to GSS-API peers) independent of the status indications which those primitives indicate. Token transfer may take place in an in-band manner, integrated into the same protocol stream used by the Document Expiration: 15 December 1992 7 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) GSS-API callers for other data transfers, or in an out-of-band manner across a logically separate channel. Development of GSS-API support primitives based on a partic- ular underlying cryptographic technique and protocol does not necessarily imply that GSS-API callers invoking that GSS-API mechanism type will be able to interoperate with peers invoking the same technique and protocol outside the GSS-API paradigm. For example, the format of GSS-API tokens defined in conjunc- tion with a particular mechanism, and the techniques used to integrate those tokens into callers' protocols, may not be the same as those used by non-GSS-API callers of the same underlying technique. 1.1.3 Security Contexts Security contexts are established between peers, using cre- dentials established locally in conjunction with each peer or received by peers via delegation. Multiple contexts may ex- ist simultaneously between a pair of peers, using the same or different sets of credentials. Coexistence of multiple con- texts using different credentials allows graceful rollover when credentials expire. Distinction among multiple contexts based on the same credentials serves applications by distinguishing different message streams in a security sense. The GSS-API is independent of underlying protocols and address- ing structure, and depends on its callers to transport GSS-API- provided data elements. As a result of these factors, it is a caller responsibility to parse communicated messages, separat- ing GSS-API-related data elements from caller-provided data. The GSS-API is independent of connection vs. connectionless orientation of the underlying communications service. 8 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) No correlation between security context and communications protocol association is dictated[ 2]. This separation allows the GSS-API to be used in a wide range of communications en- vironments, and also simplifies the calling sequences of the individual calls. In many cases (depending on underlying secu- rity protocol, associated mechanism, and availability of cached information), the state information required for context setup can be sent concurrently with initial signed user data, without interposing additional message exchanges. 1.1.4 Mechanism Types In order to successfully establish a security context with a target peer, it is necessary to identify an appropriate underly- ing mechanism type (mech_type) which both initiator and target peers support. The definition of a mechanism embodies not only the use of a particular cryptographic technology (or a hybrid or choice among alternative cryptographic technologies), but also definition of the syntax and semantics of data element exchanges which that mechanism will employ in order to support security services. It is recommended that callers initiating contexts specify the "default" mech_type value, allowing system-specific functions within or invoked by the GSS-API implementation to select the appropriate mech_type, but callers may direct that a particular mech_type be employed when necessary. The means for identifying a shared mech_type to establish a security context with a peer will vary in different environments and circumstances; examples include (but are not limited to): o use of a fixed mech_type, defined by configuration, within an environment ___________________ [ 2] The optional channel binding facility, discussed in Sec- tion 1.1.6 of this document, represents an intentional excep- tion to this rule, supporting additional protection features within GSS-API supporting mechanisms. Document Expiration: 15 December 1992 9 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o syntactic convention on a target-specific basis, through examination of a target's name o lookup of a target's name in a naming service or other database in order to identify mech_types supported by that target o explicit negotiation between GSS-API callers in advance of security context setup When transferred between GSS-API peers, mech_type specifiers (per Appendix B, represented as Object Identifiers (OIDs)) serve to qualify the interpretation of associated tokens. Use of hierarchically structured OIDs serves to preclude ambiguous interpretation of mech_type specifiers. The OID representing the DASS MechType, for example, is 1.3.12.2.1011.7.5. 1.1.5 Naming The GSS-API avoids prescription of naming structures, treating the names transferred across the interface in order to initiate and accept security contexts as opaque octet string quantities. This approach supports the GSS-API's goal of implementability atop a range of underlying security mechanisms, recognizing the fact that different mechanisms process and authenticate names which are presented in different forms. Generalized services offering translation functions among arbitrary sets of naming environments are outside the scope of the GSS-API; availability and use of local conversion functions to translate among the naming formats supported within a given end system is antici- pated. Two distinct classes of name representations are used in con- junction with different GSS-API parameters: o a printable form (denoted by OCTET STRING), for acceptance from and presentation to users; printable name forms are accompanied by OID tags identifying the namespace to which they correspond 10 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o an internal form (denoted by INTERNAL NAME), opaque to callers and defined by individual GSS-API implementations; GSS-API implementations supporting multiple namespace types are responsible for maintaining internal tags to disambiguate the interpretation of particular names Tagging of printable names allows GSS-API callers and underlying GSS-API mechanisms to disambiguate name types and to determine whether an associated name's type is one which they are capable of processing, avoiding aliasing problems which could result from misinterpreting a name of one type as a name of another type. In addition to providing means for names to be tagged with types, this specification defines primitives to support a level of naming environment independence for certain calling applications. To provide basic services[3] oriented towards the requirements of callers which need not themselves interpret the internal syntax and semantics of names, GSS-API calls for name comparison (GSS_Compare_name()), human-readable display (GSS_Display_name()), input conversion (GSS_Import_name()), and internal name deallocation (GSS_Release_name()) functions are defined. GSS_Import_name() implementations can, where appropriate, sup- port more than one printable syntax corresponding to a given namespace (e.g., alternative printable representations for X.500 Distinguished Names), allowing flexibility for their callers to select among alternative representations. GSS_Display_name() ___________________ [3] It is anticipated that these proposed GSS-API calls will be implemented in many end systems based on system-specific name manipulation primitives already extant within those end systems; inclusion within the GSS-API is intended to offer GSS-API callers a portable means to perform specific opera- tions, supportive of authorization and audit requirements, on authenticated names. Document Expiration: 15 December 1992 11 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) implementations output a printable syntax selected as appropri- ate to their operational environments; this selection is a local matter. Callers desiring portability across alternative print- able syntaxes should refrain from implementing comparisons based on printable name forms and should instead use the GSS_Compare_ name() call to determine whether or not one internal-format name matches another. 1.1.6 Channel Bindings The GSS-API accommodates the concept of caller-provided channel binding ("chan_binding") information, used by GSS-API callers to bind the establishment of a security context to relevant characteristics (e.g., addresses, transformed representations of encryption keys) of the underlying communications channel and of protection mechanisms applied to that communications channel. Verification by one peer of chan_binding information provided by the other peer to a context serves to protect against various active attacks. The caller initiating a security context must determine the chan_binding values before making the GSS_Init_ sec_context() call, and consistent values must be provided by both peers to a context. Callers should not assume that underlying mechanisms provide confidentiality protection for channel binding information. Use or non-use of the GSS-API channel binding facility is a caller option, and GSS-API supporting mechanisms can support operation in an environment where NULL channel bindings are presented. When non-NULL channel bindings are used, certain mechanisms will offer enhanced security value by interpreting the bindings' content (rather than simply representing those bindings, or signatures computed on them, within tokens) and will therefore depend on presentation of specific data in a defined format. To this end, agreements among mechanism im- plementors are defining[ 4] conventional interpretations for ___________________ [ 4] These conventions are being incorporated into related documents. 12 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) the contents of channel binding arguments, including address specifiers (with content dependent on communications protocol environment) for context initiators and acceptors. In order for GSS-API callers to be portable across multiple mechanisms and achieve the full security functionality available from each mechanism, it is strongly recommended that GSS-API callers pro- vide channel bindings consistent with these conventions and those of the networking environment in which they operate. 1.2 GSS-API Features and Issues This section describes aspects of GSS-API operations, of the security services which the GSS-API provides, and provides commentary on design issues. 1.2.1 Status Reporting Each GSS-API call provides two status return values. Major_ status values provide a mechanism-independent indication of call status (e.g., GSS_COMPLETE, GSS_FAILURE, GSS_CONTINUE_NEEDED), sufficient to drive normal control flow within the caller in a generic fashion. Table 1 summarizes the defined major_status return codes in tabular fashion. Document Expiration: 15 December 1992 13 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) ________________________________________________________________ Table_1:__GSS-API_Major_Status_Codes____________________________ FATAL ERROR CODES GSS_BAD_BINDINGS channel binding mismatch GSS_BAD_MECH unsupported mechanism requested GSS_BAD_NAME invalid name provided GSS_BAD_NAMETYPE name of unsupported type provided GSS_BAD_STATUS invalid input status selector GSS_BAD_SIG token had invalid signature GSS_CONTEXT_EXPIRED specified security context expired GSS_CREDENTIALS_EXPIRED expired credentials detected GSS_DEFECTIVE_CREDENTIAL defective credential detected GSS_DEFECTIVE_TOKEN defective token detected GSS_FAILURE failure, unspecified at GSS-API level GSS_NO_CONTEXT no valid security context specified GSS_NO_CRED no valid credentials provided 14 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) ________________________________________________________________ Table_1_(Cont.):__GSS-API_Major_Status_Codes____________________ INFORMATORY STATUS CODES GSS_COMPLETE normal completion GSS_CONTINUE_NEEDED continuation call to routine re- quired GSS_DUPLICATE_TOKEN duplicate per-message token de- tected GSS_OLD_TOKEN timed-out per-message token de- tected GSS_UNSEQ_TOKEN out-of-order per-message token _____________________________detected___________________________ Minor_status provides more detailed status information which may include status codes specific to the underlying security mecha- nism. Minor_status values are not specified in this document. GSS_CONTINUE_NEEDED major_status returns, and optional message outputs, are provided in GSS_Init_sec_context() and GSS_Accept_ sec_context() calls so that different mechanisms' employment of different numbers of messages within their authentication sequences need not be reflected in separate code paths within calling applications. The same mechanism is used to encapsulate mutual authentication within the GSS-API's context initiation calls. In the graphic version of this document, Figure 3 illus- trates a GSS-API continuation scenario. Document Expiration: 15 December 1992 15 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) For mech_types which require interactions with third-party servers in order to establish a security context, GSS-API con- text establishment calls may block pending completion of such third-party interactions. On the other hand, no GSS-API calls pend on serialized interactions with GSS-API peer entities. As a result, local GSS-API status returns cannot reflect un- predictable or asynchronous exceptions occurring at remote peers, and reflection of such status information is a caller responsibility outside the GSS-API. 1.2.2 Per-Message Security Service Availability When a context is established, two flags are returned to indi- cate the set of per-message protection security services which will be available on the context: o the integ_avail flag indicates whether per-message integrity and data origin authentication services are available o the conf_avail flag indicates whether per-message confiden- tiality services are available, and will never be returned TRUE unless the integ_avail flag is also returned TRUE GSS-API callers desiring per-message security services should check the values of these flags at context establishment time, and must be aware that a returned FALSE value for integ_avail means that invocation of GSS_Sign() or GSS_Seal() primitives on the associated context will apply no cryptographic protection to user data messages. The GSS-API per-message protection service primitives, as the category name implies, are oriented to operation at the gran- ulatity of protocol data units. They perform cryptographic operations on the data units, transfer cryptographic control information in tokens, and, in the case of GSS_Seal(), encap- sulate the protected data unit. As such, these primitives are not oriented to efficient data protection for stream-paradigm protocols (e.g., Telnet) if cryptography must be applied on an octet-by-octet basis. 16 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 1.2.3 Per-Message Replay Detection and Sequencing Certain underlying mech_types are expected to offer support for replay detection and/or sequencing of messages transferred on the contexts they support. These optionally-selectable protec- tion features are distinct from replay detection and sequencing features applied to the context establishment operation itself; the presence or absence of context-level replay or sequencing features is wholly a function of the underlying mech_type's capabilities, and is not selected or omitted as a caller option. The caller initiating a context provides flags (replay_det_ req_flag and sequence_req_flag) to specify whether the use of per-message replay detection and sequencing features is desired on the context being established. The GSS-API implementation at the initiator system can determine whether these features are supported (and whether they are optionally selectable) as a function of mech_type, without need for bilateral negotiation with the target. When enabled, these features provide recipients with indicators as a result of GSS-API processing of incoming messages, identifying whether those messages were detected as duplicates or out-of-sequence. Detection of such events does not prevent a suspect message from being provided to a recipient; the appropriate course of action on a suspect message is a matter of caller policy. The semantics of the replay detection and sequencing services applied to received messages, as visible across the interface which the GSS-API provides to its clients, are as follows: When replay_det_state is TRUE, the possible major_status returns for well-formed and correctly signed messages are as follows: 1. GSS_COMPLETE indicates that the message was within the win- dow (of time or sequence space) allowing replay events to be detected, and that the message was not a replay of a previously-processed message within that window. Document Expiration: 15 December 1992 17 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 2. GSS_DUPLICATE_TOKEN indicates that the signature on the re- ceived message was correct, but that the message was recog- nized as a duplicate of a previously-processed message. 3. GSS_OLD_TOKEN indicates that the signature on the received message was correct, but that the message is too old to be checked for duplication. When sequence_state is TRUE, the possible major_status returns for well-formed and correctly signed messages are as follows: 1. GSS_COMPLETE indicates that the message was within the win- dow (of time or sequence space) allowing replay events to be detected, and that the message was not a replay of a previously-processed message within that window. 2. GSS_DUPLICATE_TOKEN indicates that the signature on the re- ceived message was correct, but that the message was recog- nized as a duplicate of a previously-processed message. 3. GSS_OLD_TOKEN indicates that the signature on the received message was correct, but that the token is too old to be checked for duplication. 4. GSS_UNSEQ_TOKEN indicates that the signature on the received message was correct, but that it is earlier in a sequenced stream [5] than a message already processed on the context. ___________________ [5] Mechanisms can be architected to provide a stricter form of sequencing service, delivering particular messages to recipi- ents only after all predecessor messages in an ordered stream have been delivered. This type of support is incompatible with the GSS-API paradigm in which recipients receive all mes- sages, whether in order or not, and provide them (one at a time, without intra-GSS-API message buffering) to GSS-API rou- tines for validation. GSS-API facilities provide supportive functions, aiding clients to achieve strict message stream in- tegrity in an efficient manner in conjunction with sequencing provisions in communications protocols, but the GSS-API does not offer this level of message stream integrity service by 18 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) As the message stream integrity features (especially sequencing) may interfere with certain applications' intended communications paradigms, and since support for such features is likely to be resource intensive, it is highly recommended that mech_types supporting these features allow them to be activated selectively on initiator request when a context is established. A context initiator and target are provided with corresponding indicators (replay_det_state and sequence_state), signifying whether these features are active on a given context. An example mech_type supporting per-message replay detection could (when replay_det_state is TRUE) implement the feature as follows: The underlying mechanism would insert timestamps in data elements output by GSS_Sign() and GSS_Seal(), and would maintain (within a time-limited window) a cache (qualified by originator-recipient pair) identifying received data elements processed by GSS_Verify() and GSS_Unseal(). When this feature is active, exception status returns (GSS_DUPLICATE_TOKEN, GSS_ OLD_TOKEN) will be provided when GSS_Verify() or GSS_Unseal() is presented with a message which is either a detected duplicate of a prior message or which is too old to validate against a cache of recently received messages. 1.2.4 Quality of Protection Some mech_types will provide their users with fine granularity control over the means used to provide per-message protection, allowing callers to trade off security processing overhead dy- namically against the protection requirements of particular messages. A per-message quality-of-protection parameter (anal- ogous to quality-of-service, or QOS) selects among different QOP options supported by that mechanism. On context establish- ment for a multi-QOP mech_type, context-level data provides the prerequisite data for a range of protection qualities. ___________________ itself. Document Expiration: 15 December 1992 19 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) It is expected that the majority of callers will not wish to exert explicit mechanism-specific QOP control and will therefore request selection of a default QOP. Definitions of, and choices among, non-default QOP values are mechanism-specific, and no ordered sequences of QOP values can be assumed equivalent across different mechanisms. Meaningful use of non-default QOP values demands that callers be familiar with the QOP definitions of an underlying mechanism or mechanisms, and is therefore a non- portable construct. 2 Interface Descriptions This section describes the GSS-API's service interface, dividing the set of calls offered into four groups. Credential management calls are related to the acquisition and release of credentials by principals. Context-level calls are related to the management of security contexts between principals. Per-message calls are related to the protection of individual messages on established security contexts. Support calls provide ancillary functions useful to GSS-API callers. Table 2 groups and summarizes the calls in tabular fashion. 20 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) ________________________________________________________________ Table_2:__GSS-API_Calls_________________________________________ CREDENTIAL MANAGEMENT GSS_Acquire_cred acquire credentials for use GSS_Release_cred release credentials after use GSS_Inquire_cred display information about creden- tials CONTEXT-LEVEL CALLS GSS_Init_sec_context initiate outbound security context GSS_Accept_sec_context accept inbound security context GSS_Delete_sec_context flush context when no longer needed GSS_Process_context_token process received control token on context GSS_Context_time indicate validity time remaining on context PER-MESSAGE CALLS GSS_Sign apply signature, receive as token separate from message GSS_Verify validate signature token along with message GSS_Seal sign, optionally encrypt, encapsu- late Document Expiration: 15 December 1992 21 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) ________________________________________________________________ Table_2_(Cont.):__GSS-API_Calls_________________________________ GSS_Unseal decapsulate, decrypt if needed, validate signature SUPPORT CALLS GSS_Display_status translate status codes to printable form GSS_Indicate_mechs indicate mech_types supported on local system GSS_Compare_name compare two names for equality GSS_Display_name translate name to printable form GSS_Import_name convert printable name to normal- ized form GSS_Release_name free storage of normalized-form name GSS_Release_buffer free storage of printable name GSS_Release_oid_set__________free_storage_of_OID_set_object_____ 2.1 Credential management calls These GSS-API calls provide functions related to the management of credentials. Their characterization with regard to whether or not they may block pending exchanges with other network entities (e.g., directories or authentication servers) depends in part on OS-specific (extra-GSS-API) issues, so is not specified in this document. 22 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) The GSS_Acquire_cred() call is defined within the GSS-API in support of application portability, with a particular orien- tation towards support of portable server applications. It is recognized that (for certain systems and mechanisms) creden- tials for interactive users may be managed differently from credentials for server processes; in such environments, it is the GSS-API implementation's responsibility to distinguish these cases and the procedures for making this distinction are a lo- cal matter. The GSS_Release_cred() call provides a means for callers to indicate to the GSS-API that use of a credentials structure is no longer required. The GSS_Inquire_cred() call allows callers to determine information about a credentials structure. 2.1.1 GSS_Acquire_cred call Inputs: o desiredname INTERNAL NAME, -NULL requests locally-determined default o lifetime_req INTEGER,-in seconds; 0 requests default o desired_mechs SET OF OBJECT IDENTIFIER,-empty set requests system-selected default o cred_usage INTEGER-0=INITIATE-AND-ACCEPT, 1=INITIATE-ONLY, 2=ACCEPT-ONLY Outputs: o major_status INTEGER, o minor_status INTEGER, o output_cred_handle OCTET STRING, o lifetime_rec INTEGER -in seconds, or reserved value for INDEFINITE Document Expiration: 15 December 1992 23 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) Return major_status codes: o GSS_COMPLETE indicates that requested credentials were suc- cessfully established, for the duration indicated in life- time_rec, suitable for the usage requested in cred_usage, and for all or a subset of the requested mech_types, and that those credentials can be referenced for subsequent use with the handle returned in output_cred_handle. o GSS_BAD_MECH indicates that a mech_type unsupported by the GSS-API implementation type was requested, causing the cre- dential establishment operation to fail. o GSS_BAD_NAMETYPE indicates that the provided desiredname is uninterpretable or of a type unsupported by the supporting GSS-API implementation, so no credentials could be estab- lished for the accompanying desiredname. o GSS_BAD_NAME indicates that the provided desiredname is in- consistent in terms of internally-incorporated type specifier information, so no credentials could be established for the accompanying desiredname. o GSS_FAILURE indicates that credential establishment failed for reasons unspecified at the GSS-API level, including lack of authorization to establish and use credentials associated with the identity named in the input desiredname argument. GSS_Acquire_cred() is used to acquire credentials so that a principal can (as a function of the input cred_usage parameter) initiate and/or accept security contexts under the identity represented by the desiredname input argument. On successful completion, the returned output_cred_handle result provides a handle for subsequent references to the acquired credentials. Typically, single-user client processes using only default credentials for context establishment purposes will have no need to invoke this call. 24 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) A caller may provide a reserved value for desiredname signifying a request for credentials corresponding to a default princi- pal identity; the procedures used by GSS-API implementations to select the appropriate principal identity in response to this form of request are local matters. It is possible that multiple pre-established credentials may exist for the same principal identity (for example, as a result of multiple user login ses- sions) when GSS_Acquire_cred() is called; the means used in such cases to select a specific credential are local matters[6]. The lifetime_rec result indicates the length of time for which the acquired credentials will be valid, as an offset from the present. A mechanism may return a reserved value indicating IN- DEFINITE if no constraints on credential lifetime are imposed. A caller of GSS_Acquire_cred() can request a length of time for which acquired credentials are to be valid (lifetime_req argu- ment), beginning at the present[7], or can request credentials with a default validity interval. Certain mechanisms and im- plementations may bind in credential validity period specifiers at a point preliminary to invocation of the GSS_Acquire_cred() call (e.g., in conjunction with user login procedures). As a result, callers requesting non-default values for lifetime_req must recognize that such requests cannot always be honored and must be prepared to accommodate the use of returned credentials with different lifetimes as indicated in lifetime_rec. The caller of GSS_Acquire_cred() can explicitly specify a set of mech_types which are to be accommodated in the returned credentials (desired_mechs argument), or can request credentials for a system-defined default set of mech_types. Selection of the system-specified default set is recommended in the interests of application_portability. [6] The input lifetime_req argument to GSS_Acquire_cred() may provide useful information for local GSS-API implementations to employ in making this disambiguation in a manner which will best satisfy a caller's intent. [7] Requests for postdated credentials are not supported within the GSS-API. Document Expiration: 15 December 1992 25 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 2.1.2 GSS_Release_cred call Input: o cred_handle OCTET STRING-NULL specifies default credentials Outputs: o major_status INTEGER, o minor_status INTEGER Return major_status codes: o GSS_COMPLETE indicates that the credentials referenced by the input cred_handle were released for purposes of subsequent access by the caller. The effect on other processes which may be authorized shared access to such credentials is a local matter. o GSS_NO_CRED indicates that no release operation was per- formed, either because the input cred_handle was invalid or because the caller lacks authorization to access the refer- enced credentials. o GSS_FAILURE indicates that the release operation failed for reasons unspecified at the GSS-API level. Provides a means for a caller to explicitly request that cre- dentials be released when their use is no longer required. Note that system-specific credential management functions are also likely to exist, for example to assure that credentials shared among processes are properly deleted when all affected processes terminate, even if no explicit release requests are issued by those processes. Given the fact that multiple callers are not precluded from gaining authorized access to the same creden- tials, invocation of GSS_Release_cred() cannot be assumed to delete a particular set of credentials on a system-wide basis. 26 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 2.1.3 GSS_Inquire_cred call Input: o cred_handle OCTET STRING-NULL specifies default credentials Outputs: o major_status INTEGER, o minor_status INTEGER, o cred_name INTERNAL NAME, o lifetime_rec INTEGER-in seconds, or reserved value for INDEF- INITE o cred_usage INTEGER,-0=INITIATE-AND-ACCEPT, 1=INITIATE-ONLY, 2=ACCEPT-ONLY o mech_set SET OF OBJECT IDENTIFIER Return major_status codes: o GSS_COMPLETE indicates that the credentials referenced by the input cred_handle argument were valid, and that the output cred_name, lifetime_rec, and cred_usage values represent, respectively, the credentials' associated principal name, remaining lifetime, suitable usage modes, and supported mechanism types. o GSS_NO_CRED indicates that no information could be returned about the referenced credentials, either because the input cred_handle was invalid or because the caller lacks autho- rization to access the referenced credentials. o GSS_FAILURE indicates that the release operation failed for reasons unspecified at the GSS-API level. The GSS_Inquire_cred() call is defined primarily for the use of those callers which make use of default credentials rather than acquiring credentials explicitly with GSS_Acquire_cred(). It enables callers to determine a credential structure's asso- ciated principal name, remaining validity period, usability for Document Expiration: 15 December 1992 27 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) security context initiation and/or acceptance, and supported mechanisms. 2.2 Context-level calls This group of calls is devoted to the establishment and manage- ment of security contexts between peers. A context's initiator calls GSS_Init_sec_context(), resulting in generation of a to- ken which the caller passes to the target. At the target, that token is passed to GSS_Accept_sec_context(). Depending on the underlying mech_type and specified options, additional token exchanges may be performed in the course of context establish- ment; such exchanges are accommodated by GSS_CONTINUE_NEEDED status returns from GSS_Init_sec_context() and GSS_Accept_sec_ context(). Either party to an established context may invoke GSS_Delete_sec_context() to flush context information when a context is no longer required. GSS_Process_context_token() is used to process received tokens carrying context-level control information. GSS_Context_time() allows a caller to determine the length of time for which an established context will remain valid. 2.2.1 GSS_Init_sec_context call Inputs: o claimant_cred_handle OCTET STRING, -NULL specifies "use default" o input_context_handle INTEGER, -0 specifies "none assigned yet" o targname INTERNAL NAME, o mech_type OBJECT IDENTIFIER, -NULL parameter specifies "use default" o deleg_req_flag BOOLEAN, o mutual_req_flag BOOLEAN, 28 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o replay_det_req_flag BOOLEAN, o sequence_req_flag BOOLEAN, o lifetime_req INTEGER,-0 specifies default lifetime o chan_bindings OCTET STRING, o input_token OCTET STRING-NULL or token received from target Outputs: o major_status INTEGER, o minor_status INTEGER, o output_context_handle INTEGER, o mech_type OBJECT IDENTIFIER, -actual mechanism always indi- cated, never NULL o output_token OCTET STRING, -NULL or token to pass to context target o deleg_state BOOLEAN, o mutual_state BOOLEAN, o replay_det_state BOOLEAN, o sequence_state BOOLEAN, o conf_avail BOOLEAN, o integ_avail BOOLEAN, o lifetime_rec INTEGER - in seconds, or reserved value for INDEFINITE This call may block pending network interactions for those mech_ types in which an authentication server or other network entity must be consulted on behalf of a context initiator in order to generate an output_token suitable for presentation to a specified target. Document Expiration: 15 December 1992 29 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) Return major_status codes: o GSS_COMPLETE indicates that context-level information was successfully initialized, and that the returned output_token will provide sufficient information for the target to perform per-message processing on the newly-established context. o GSS_CONTINUE_NEEDED indicates that control information in the returned output_token must be sent to the target, and that a reply must be received and passed as the input_token argument to a continuation call to GSS_Init_sec_context(), before per-message processing can be performed in conjunction with this context. o GSS_DEFECTIVE_TOKEN indicates that consistency checks per- formed on the input_token failed, preventing further process- ing from being performed based on that token. o GSS_DEFECTIVE_CREDENTIAL indicates that consistency checks performed on the credential structure referenced by claimant_ cred_handle failed, preventing further processing from being performed using that credential structure. o GSS_BAD_SIG indicates that the received input_token con- tains an incorrect signature, so context setup cannot be accomplished. o GSS_NO_CRED indicates that no context was established, ei- ther because the input cred_handle was invalid, because the referenced credentials are valid for context acceptor use only, or because the caller lacks authorization to access the referenced credentials. o GSS_CREDENTIALS_EXPIRED indicates that the credentials pro- vided through the input claimant_cred_handle argument are no longer valid, so context establishment cannot be completed. o GSS_BAD_BINDINGS indicates that a mismatch between the caller-provided chan_bindings and those extracted from the input_token was detected, signifying a security-relevant event and preventing context establishment. (This result will 30 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) be returned by GSS_Init_sec_context only for contexts where mutual_state is TRUE.) o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provided; this major status will be returned only for successor calls following GSS_CONTINUE_ NEEDED status returns. o GSS_BAD_NAMETYPE indicates that the provided targname is of a type uninterpretable or unsupported by the supporting GSS-API implementation, so context establishment cannot be completed. o GSS_BAD_NAME indicates that the provided targname is incon- sistent in terms of internally-incorporated type specifier information, so context establishment cannot be accomplished. o GSS_FAILURE indicates that context setup could not be ac- complished for reasons unspecified at the GSS-API level, and that no interface-defined recovery action is available. Used by context initiator, providing an output_token suitable for use by the target within the selected mech_type's protocol. Using information in the credentials structure referenced by claimant_cred_handle, initialize the data structures required to establish a security context with target targname. The claimant_ cred_handle must correspond to the same valid credentials struc- ture on the initial call to GSS_Init_sec_context() and on any successor calls resulting from GSS_CONTINUE_NEEDED status re- turns; different protocol sequences modeled by the GSS_CONTINUE_ NEEDED mechanism will require access to credentials at different points in the context establishment sequence. The input_context_handle argument is 0, specifying "not yet as- signed", on the first GSS_Init_sec_context() call relating to a given context. That call returns an output_context_handle for future references to this context. When continuation attempts to GSS_Init_sec_context() are needed to perform context establish- ment, the previously-returned non-zero handle value is entered into the input_context_handle argument and will be echoed in the returned output_context_handle argument. On such continuation Document Expiration: 15 December 1992 31 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) attempts (and only on continuation attempts) the input_token value is used, to provide the token returned from the context's target. The chan_bindings argument is used by the caller to provide information binding the security context to security-related characteristics (e.g., addresses, cryptographic keys) of the underlying communications channel. See Section 1.1.6 of this document for more discussion of this argument's usage. The input_token argument contains a message received from the target, and is significant only on a call to GSS_Init_sec_ context() which follows a previous return indicating GSS_ CONTINUE_NEEDED major_status. It is the caller's responsibility to establish a communications path to the target, and to transmit any returned output_token (independent of the accompanying returned major_status value) to the target over that path. The output_token can, however, be transmitted along with the first application-provided input mes- sage to be processed by GSS_Sign() or GSS_Seal() in conjunction with this context. The initiator may request various context-level functions through input flags: the deleg_req_flag requests delegation of access rights, the mutual_req_flag requests mutual authenti- cation, the replay_det_req_flag requests that replay detection features be applied to messages transferred on the established context, and the sequence_req_flag requests that sequencing be enforced. (See Section 1.2.3 for more information on replay detection and sequencing features.) Not all of the optionally-requestable features will be available in all underlying mech_types; the corresponding return state values (deleg_state, mutual_state, replay_det_state, sequence_ state) indicate, as a function of mech_type processing capabil- ities and initiator-provided input flags, the set of features which will be active on the context. These state indicators' 32 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) values are undefined unless the routine's major_status indi- cates COMPLETE. Failure to provide the precise set of features requested by the caller does not cause context establishment to fail; it is the caller's prerogative to delete the context if the feature set provided is unsuitable for the caller's use. The returned mech_type value indicates the specific mechanism employed on the context, and will never indicate the value for "default". The conf_avail return value indicates whether the context sup- ports per-message confidentiality services, and so informs the caller whether or not a request for encryption through the conf_ req_flag input to GSS_Seal() can be honored. In similar fash- ion, the integ_avail return value indicates whether per-message integrity services are available (through either GSS_Sign() or GSS_Seal()) on the established context. The lifetime_req input specifies a desired upper bound for the lifetime of the context to be established, with a value of 0 used to request a default lifetime. The lifetime_rec return value indicates the length of time for which the context will be valid, expressed as an offset from the present; depending on mechanism capabilities, credential lifetimes, and local policy, it may not correspond to the value requested in lifetime_req. If no constraints on context lifetime are imposed, this may be indicated by returning a reserved value representing INDEFI- NITE lifetime_req. The values of conf_avail, integ_avail, and lifetime_rec are undefined unless the routine's major_status indicates COMPLETE. If the mutual_state is TRUE, this fact will be reflected within the output_token. A call to GSS_Accept_sec_context() at the target in conjunction with such a context will return a to- ken, to be processed by a continuation call to GSS_Init_sec_ context(), in order to achieve mutual authentication. Document Expiration: 15 December 1992 33 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 2.2.2 GSS_Accept_sec_context call Inputs: o acceptor_cred_handle OCTET STRING,-NULL specifies "use de- fault" o input_context_handle INTEGER, -0 specifies "not yet assigned" o chan_bindings OCTET STRING, o input_token OCTET STRING Outputs: o major_status INTEGER, o minor_status INTEGER, o srcname INTERNAL NAME, o mech_type OBJECT IDENTIFIER, o output_context_handle INTEGER, o deleg_state BOOLEAN, o mutual_state BOOLEAN, o replay_det_state BOOLEAN, o sequence_state BOOLEAN, o conf_avail BOOLEAN, o integ_avail BOOLEAN, o lifetime_rec INTEGER, - in seconds, or reserved value for INDEFINITE o delegated_cred_handle OCTET STRING, o output_token OCTET STRING -NULL or token to pass to context initiator 34 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) This call may block pending network interactions for those mech_types in which a directory service or other network entity must be consulted on behalf of a context acceptor in order to validate a received input_token. Return major_status codes: o GSS_COMPLETE indicates that context-level data structures were successfully initialized, and that per-message process- ing can now be performed in conjunction with this context. o GSS_CONTINUE_NEEDED indicates that control information in the returned output_token must be sent to the initiator, and that a response must be received and passed as the input_token argument to a continuation call to GSS_Accept_sec_context(), before per-message processing can be performed in conjunction with this context. o GSS_DEFECTIVE_TOKEN indicates that consistency checks per- formed on the input_token failed, preventing further process- ing from being performed based on that token. o GSS_DEFECTIVE_CREDENTIAL indicates that consistency checks performed on the credential structure referenced by acceptor_ cred_handle failed, preventing further processing from being performed using that credential structure. o GSS_BAD_SIG indicates that the received input_token con- tains an incorrect signature, so context setup cannot be accomplished. o GSS_DUPLICATE_TOKEN indicates that the signature on the received input_token was correct, but that the input_token was recognized as a duplicate of an input_token already processed. No new context is established. o GSS_OLD_TOKEN indicates that the signature on the received input_token was correct, but that the input_token is too old to be checked for duplication against previously-processed input_tokens. No new context is established. Document Expiration: 15 December 1992 35 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o GSS_NO_CRED indicates that no context was established, ei- ther because the input cred_handle was invalid, because the referenced credentials are valid for context initiator use only, or because the caller lacks authorization to access the referenced credentials. o GSS_CREDENTIALS_EXPIRED indicates that the credentials pro- vided through the input acceptor_cred_handle argument are no longer valid, so context establishment cannot be completed. o GSS_BAD_BINDINGS indicates that a mismatch between the caller-provided chan_bindings and those extracted from the input_token was detected, signifying a security-relevant event and preventing context establishment. o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provided; this major status will be returned only for successor calls following GSS_CONTINUE_ NEEDED status returns. o GSS_FAILURE indicates that context setup could not be ac- complished for reasons unspecified at the GSS-API level, and that no interface-defined recovery action is available. Used by context target. Using information in the credentials structure referenced by the input acceptor_cred_handle, verify the incoming input_token and (assuming success) return the au- thenticated srcname and the mech_type used. The acceptor_cred_ handle must correspond to the same valid credentials structure on the initial call to GSS_Accept_sec_context() and on any suc- cessor calls resulting from GSS_CONTINUE_NEEDED status returns; different protocol sequences modeled by the GSS_CONTINUE_NEEDED mechanism will require access to credentials at different points in the context establishment sequence. The input_context_handle argument is 0, specifying "not yet as- signed", on the first GSS_Accept_sec_context() call relating to a given context. That call returns an output_context_handle for future references to this context; when continuation attempts 36 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) to GSS_Accept_sec_context() are needed to perform context es- tablishment, that handle value will be entered into the input_ context_handle argument. The chan_bindings argument is used by the caller to provide information binding the security context to security-related characteristics (e.g., addresses, cryptographic keys) of the underlying communications channel. See Section 1.1.6 of this document for more discussion of this argument's usage. The returned state results (deleg_state, mutual_state, replay_ det_state, and sequence_state) reflect the same context state values as returned to GSS_Init_sec_context()'s caller at the initiator system. The conf_avail return value indicates whether the context sup- ports per-message confidentiality services, and so informs the caller whether or not a request for encryption through the conf_ req_flag input to GSS_Seal() can be honored. In similar fash- ion, the integ_avail return value indicates whether per-message integrity services are available (through either GSS_Sign() or GSS_Seal()) on the established context. The lifetime_rec return value indicates the length of time for which the context will be valid, expressed as an offset from the present. The values of deleg_state, mutual_state, replay_det_ state, sequence_state, conf_avail, integ_avail, and lifetime_rec are undefined unless the accompanying major_status indicates COMPLETE. The delegated_cred_handle result is significant only when deleg_ state is TRUE, and provides a means for the target to reference the delegated credentials. The output_token result, when non- NULL, provides a context-level token to be returned to the context initiator to continue a multi-step context establishment sequence. As noted with GSS_Init_sec_context(), any returned token should be transferred to the context's peer (in this case, the context initiator), independent of the value of the accompanying returned major_status. Document Expiration: 15 December 1992 37 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) Note: A target must be able to distinguish a context-level in- put_token, which is passed to GSS_Accept_sec_context(), from the per-message data elements passed to GSS_Verify() or GSS_ Unseal(). These data elements may arrive in a single applica- tion message, and GSS_Accept_sec_context() must be performed before per-message processing can be performed successfully. 2.2.3 GSS_Delete_sec_context call Input: o context_handle INTEGER Outputs: o major_status INTEGER, o minor_status INTEGER, o output_context_token OCTET STRING Return major_status codes: o GSS_COMPLETE indicates that the context was recognized, that relevant context-specific information was flushed, and that the returned output_context_token is ready for transfer to the context's peer. o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provide, so no deletion was performed. o GSS_FAILURE indicates that the context is recognized, but that the GSS_Delete_sec_context() operation could not be performed for reasons unspecified at the GSS-API level. This call may block pending network interactions for mech_types in which active notification must be made to a central server when a security context is to be deleted. 38 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) This call can be made by either peer in a security context, to flush context-specific information and to return an output_ context_token which can be passed to the context's peer in- forming it that the peer's corresponding context information can also be flushed. (Once a context is established, the peers involved are expected to retain cached credential and context- related information until the information's expiration time is reached or until a GSS_Delete_sec_context() call is made.) At- tempts to perform per-message processing on a deleted context will result in error returns. 2.2.4 GSS_Process_context_token call Inputs: o context_handle INTEGER, o input_context_token OCTET STRING Outputs: o major_status INTEGER, o minor_status INTEGER, Return major_status codes: o GSS_COMPLETE indicates that the input_context_token was suc- cessfully processed in conjunction with the context refer- enced by context_handle. o GSS_DEFECTIVE_TOKEN indicates that consistency checks per- formed on the received context_token failed, preventing further processing from being performed with that token. o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provided. o GSS_FAILURE indicates that the context is recognized, but that the GSS_Process_context_token() operation could not be performed for reasons unspecified at the GSS-API level. Document Expiration: 15 December 1992 39 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) This call is used to process context_tokens received from a peer once a context has been established, with corresponding impact on context-level state information. One use for this facility is processing of the context_tokens generated by GSS_Delete_sec_ context(); GSS_Process_context_token() will not block pending network interactions for that purpose. Another use is to process tokens indicating remote-peer context establishment failures after the point where the local GSS-API implementation has already indicated GSS_COMPLETE status. 2.2.5 GSS_Context_time call Input: o context_handle INTEGER, Outputs: o major_status INTEGER, o minor_status INTEGER, o lifetime_rec INTEGER - in seconds, or reserved value for INDEFINITE Return major_status codes: o GSS_COMPLETE indicates that the referenced context is valid, and will remain valid for the amount of time indicated in lifetime_rec. o GSS_CONTEXT_EXPIRED indicates that data items related to the referenced context have expired. o GSS_CREDENTIALS_EXPIRED indicates that the context is recog- nized, but that its associated credentials have expired. o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provided. o GSS_FAILURE indicates that the requested operation failed for reasons unspecified at the GSS-API level. 40 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) This call is used to determine the amount of time for which a currently established context will remain valid. 2.3 Per-message calls This group of calls is used to perform per-message protection processing on an established security context. None of these calls block pending network interactions. These calls may be invoked by a context's initiator or by the context's target. The four members of this group should be considered as two pairs; the output from GSS_Sign() is properly input to GSS_ Verify(), and the output from GSS_Seal() is properly input to GSS_Unseal(). GSS_Sign() and GSS_Verify() support data origin authentication and data integrity services. When GSS_Sign() is invoked on an input message, it yields a per-message token containing data items which allow underlying mechanisms to provide the specified security services. The original message, along with the generated per-message token, is passed to the remote peer; these two data elements are processed by GSS_Verify(), which validates the message in conjunction with the separate token. GSS_Seal() and GSS_Unseal() support caller-requested confiden- tiality in addition to the data origin authentication and data integrity services offered by GSS_Sign() and GSS_Verify(). GSS_ Seal() outputs a single data element, encapsulating optionally- enciphered user data as well as associated token data items. The data element output from GSS_Seal() is passed to the remote peer and processed by GSS_Unseal() at that system. GSS_Unseal() combines decipherment (as required) with validation of data items related to authentication and integrity. Document Expiration: 15 December 1992 41 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 2.3.1 GSS_Sign call Inputs: o context_handle INTEGER, o qop_req INTEGER,-0 specifies default QOP o message OCTET STRING Outputs: o major_status INTEGER, o minor_status INTEGER, o per_msg_token OCTET STRING Return major_status codes: o GSS_COMPLETE indicates that a signature, suitable for an established security context, was successfully applied and that the message and corresponding per_msg_token are ready for transmission. o GSS_CONTEXT_EXPIRED indicates that context-related data items have expired, so that the requested operation cannot be performed. o GSS_CREDENTIALS_EXPIRED indicates that the context is recog- nized, but that its associated credentials have expired, so that the requested operation cannot be performed. o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provided. o GSS_FAILURE indicates that the context is recognized, but that the requested operation could not be performed for reasons unspecified at the GSS-API level. 42 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) Using the security context referenced by context_handle, apply a signature to the input message (along with timestamps and/or other data included in support of mech_type-specific mechanisms) and return the result in per_msg_token. The qop_req parameter allows quality-of-protection control. The caller passes the message and the per_msg_token to the target. The GSS_Sign() function completes before the message and per_ msg_token is sent to the peer; successful application of GSS_ Sign() does not guarantee that a corresponding GSS_Verify() has been (or can necessarily be) performed successfully when the message arrives at the destination. 2.3.2 GSS_Verify call Inputs: o context_handle INTEGER, o message OCTET STRING, o per_msg_token OCTET STRING Outputs: o qop_state INTEGER, o major_status INTEGER, o minor_status INTEGER, Return major_status codes: o GSS_COMPLETE indicates that the message was successfully verified. o GSS_DEFECTIVE_TOKEN indicates that consistency checks per- formed on the received per_msg_token failed, preventing further processing from being performed with that token. o GSS_BAD_SIG indicates that the received per_msg_token con- tains an incorrect signature for the message. Document Expiration: 15 December 1992 43 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o GSS_DUPLICATE_TOKEN, GSS_OLD_TOKEN, and GSS_UNSEQ_TOKEN values appear in conjunction with the optional per-message replay detection features described in Section 1.2.3; their semantics are described in that section. o GSS_CONTEXT_EXPIRED indicates that context-related data items have expired, so that the requested operation cannot be performed. o GSS_CREDENTIALS_EXPIRED indicates that the context is recog- nized, but that its associated credentials have expired, so that the requested operation cannot be performed. o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provided. o GSS_FAILURE indicates that the context is recognized, but that the GSS_Verify() operation could not be performed for reasons unspecified at the GSS-API level. Using the security context referenced by context_handle, verify that the input per_msg_token contains an appropriate signature for the input message, and apply any active replay detection or sequencing features. Return an indication of the quality- of-protection applied to the processed message in the qop_state result. 2.3.3 GSS_Seal call Inputs: o context_handle INTEGER, o conf_req_flag BOOLEAN, o qop_req INTEGER,-0 specifies default QOP o input_message OCTET STRING Outputs: o major_status INTEGER, 44 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o minor_status INTEGER, o conf_state BOOLEAN, o output_message OCTET STRING Return major_status codes: o GSS_COMPLETE indicates that the input_message was success- fully processed and that the output_message is ready for transmission. o GSS_CONTEXT_EXPIRED indicates that context-related data items have expired, so that the requested operation cannot be performed. o GSS_CREDENTIALS_EXPIRED indicates that the context is recog- nized, but that its associated credentials have expired, so that the requested operation cannot be performed. o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provided. o GSS_FAILURE indicates that the context is recognized, but that the GSS_Seal() operation could not be performed for reasons unspecified at the GSS-API level. Performs the data origin authentication and data integrity functions of GSS_Sign(). If the input conf_req_flag is TRUE, requests that confidentiality be applied to the input_message. Confidentiality may not be supported in all mech_types or by all implementations; the returned conf_state flag indicates whether confidentiality was provided for the input_message. The qop_req parameter allows quality-of-protection control. In all cases, the GSS_Seal() call yields a single output_ message data element containing (optionally enciphered) user data as well as control information. Document Expiration: 15 December 1992 45 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 2.3.4 GSS_Unseal call Inputs: o context_handle INTEGER, o input_message OCTET STRING Outputs: o conf_state BOOLEAN, o qop_state INTEGER, o major_status INTEGER, o minor_status INTEGER, o output_message OCTET STRING Return major_status codes: o GSS_COMPLETE indicates that the input_message was success- fully processed and that the resulting output_message is available. o GSS_DEFECTIVE_TOKEN indicates that consistency checks per- formed on the per_msg_token extracted from the input_message failed, preventing further processing from being performed. o GSS_BAD_SIG indicates that an incorrect signature was de- tected for the message. o GSS_DUPLICATE_TOKEN, GSS_OLD_TOKEN, and GSS_UNSEQ_TOKEN values appear in conjunction with the optional per-message replay detection features described in Section 1.2.3; their semantics are described in that section. o GSS_CONTEXT_EXPIRED indicates that context-related data items have expired, so that the requested operation cannot be performed. o GSS_CREDENTIALS_EXPIRED indicates that the context is recog- nized, but that its associated credentials have expired, so that the requested operation cannot be performed. 46 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o GSS_NO_CONTEXT indicates that no valid context was recognized for the input context_handle provided. o GSS_FAILURE indicates that the context is recognized, but that the GSS_Unseal() operation could not be performed for reasons unspecified at the GSS-API level. Processes a data element generated (and optionally enciphered) by GSS_Seal(), provided as input_message. The returned conf_ state value indicates whether confidentiality was applied to the input_message. If conf_state is TRUE, GSS_Unseal() deciphers the input_message. Returns an indication of the quality-of- protection applied to the processed message in the qop_state result. GSS_Seal() performs the data integrity and data ori- gin authentication checking functions of GSS_Verify() on the plaintext data. Plaintext data is returned in output_message. 2.4 Support calls This group of calls provides support functions useful to GSS-API callers, independent of the state of established contexts. Their characterization with regard to blocking or non-blocking status in terms of network interactions is unspecified. 2.4.1 GSS_Display_status call Inputs: o status_value INTEGER,-GSS-API major_status or minor_status return value o status_type INTEGER,-1 if major_status, 2 if minor_status o mech_type OBJECT IDENTIFIER-mech_type to be used for minor_ status translation Outputs: o major_status INTEGER, o minor_status INTEGER, Document Expiration: 15 December 1992 47 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o status_string_set SET OF OCTET STRING Return major_status codes: o GSS_COMPLETE indicates that a valid printable status repre- sentation (possibly representing more than one status event encoded within the status_value) is available in the returned status_string_set. o GSS_BAD_MECH indicates that translation in accordance with an unsupported mech_type was requested, so translation could not be performed. o GSS_BAD_STATUS indicates that the input status_value was invalid, or that the input status_type carried a value other than 1 or 2, so translation could not be performed. o GSS_FAILURE indicates that the requested operation could not be performed for reasons unspecified at the GSS-API level. Provides a means for callers to translate GSS-API-returned major and minor status codes into printable string representations. 2.4.2 GSS_Indicate_mechs call Input: o (none) Outputs: o major_status INTEGER, o minor_status INTEGER, o mech_set SET OF OBJECT IDENTIFIER Return major_status codes: o GSS_COMPLETE indicates that a set of available mechanisms has been returned in mech_set. 48 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o GSS_FAILURE indicates that the requested operation could not be performed for reasons unspecified at the GSS-API level. Allows callers to determine the set of mechanism types avail- able on the local system. This call is intended for support of specialized callers who need to request non-default mech_type sets from GSS_Acquire_cred(), and should not be needed by other callers. 2.4.3 GSS_Compare_name call Inputs: o name1 INTERNAL NAME, o name2 INTERNAL NAME, o name2_type OBJECT IDENTIFIER Outputs: o major_status INTEGER, o minor_status INTEGER, o name_equal BOOLEAN Return major_status codes: o GSS_COMPLETE indicates that name1 and name2 were comparable, and that the name_equal result indicates whether name1 and name2 were equal or unequal. o GSS_BAD_NAMETYPE indicates that one or both of name1 and name2 contained internal type specifiers uninterpretable by the supporting GSS-API implementation, or that the two names' types are different and incomparable, so the equality comparison could not be completed. o GSS_BAD_NAME indicates that one or both of the input names was ill-formed in terms of its internal type specifier, so the equality comparison could not be completed. Document Expiration: 15 December 1992 49 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o GSS_FAILURE indicates that the requested operation could not be performed for reasons unspecified at the GSS-API level. Allows callers to compare two internal name representations for equality. 2.4.4 GSS_Display_name call Inputs: o name INTERNAL NAME Outputs: o major_status INTEGER, o minor_status INTEGER, o name_string OCTET STRING, o name_type OBJECT IDENTIFIER Return major_status codes: o GSS_COMPLETE indicates that a valid printable name represen- tation is available in the returned name_string. o GSS_BAD_NAMETYPE indicates that the provided name was of a type uninterpretable by the supporting GSS-API implementa- tion, so no printable representation could be generated. o GSS_BAD_NAME indicates that the contents of the provided name were inconsistent with the internally-indicated name type, so no printable representation could be generated. o GSS_FAILURE indicates that the requested operation could not be performed for reasons unspecified at the GSS-API level. Allows callers to translate an internal name representation into a printable form with associated namespace type descriptor. The syntax of the printable form is a local matter. 50 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 2.4.5 GSS_Import_name call Inputs: o input_name_string OCTET STRING, o input_name_type OBJECT IDENTIFIER Outputs: o major_status INTEGER, o minor_status INTEGER, o output_name INTERNAL NAME Return major_status codes: o GSS_COMPLETE indicates that a valid name representation is output in output_name and described by the type value in output_name_type. o GSS_BAD_NAMETYPE indicates that the input_name_type is unsup- ported by the GSS-API implementation, so the import operation could not be completed. o GSS_BAD_NAME indicates that the provided input_name_string is ill-formed in terms of the input_name_type, so the import operation could not be completed. o GSS_FAILURE indicates that the requested operation could not be performed for reasons unspecified at the GSS-API level. Allows callers to provide a printable name representation, designate the type of namespace in conjunction with which it should be parsed, and convert that printable representation to an internal form suitable for input to other GSS-API routines. The syntax of the input_name is a local matter. Document Expiration: 15 December 1992 51 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 2.4.6 GSS_Release_name call Inputs: o name INTERNAL NAME Outputs: o major_status INTEGER, o minor_status INTEGER Return major_status codes: o GSS_COMPLETE indicates that the storage associated with the input name was successfully released. o GSS_BAD_NAME indicates that the input name argument did not contain a valid name. o GSS_FAILURE indicates that the requested operation could not be performed for reasons unspecified at the GSS-API level. Allows callers to release the storage associated with an inter- nal name representation. 2.4.7 GSS_Release_buffer call Inputs: o buffer OCTET STRING Outputs: o major_status INTEGER, o minor_status INTEGER Return major_status codes: o GSS_COMPLETE indicates that the storage associated with the input buffer was successfully released. 52 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) o GSS_FAILURE indicates that the requested operation could not be performed for reasons unspecified at the GSS-API level. Allows callers to release the storage associated with an OCTET STRING buffer allocated by another GSS-API call. 2.4.8 GSS_Release_oid_set call Inputs: o buffer SET OF OBJECT IDENTIFIER Outputs: o major_status INTEGER, o minor_status INTEGER Return major_status codes: o GSS_COMPLETE indicates that the storage associated with the input object identifier set was successfully released. o GSS_FAILURE indicates that the requested operation could not be performed for reasons unspecified at the GSS-API level. Allows callers to release the storage associated with an object identifier set object allocated by another GSS-API call. 3 Mechanism-Specific Example Scenarios This section provides illustrative overviews of the use of var- ious candidate mechanism types to support the GSS-API. These discussions are intended primarily for readers familiar with specific security technologies, demonstrating how GSS-API functions can be used and implemented by candidate underly- ing mechanisms. They should not be regarded as constrictive to implementations or as defining the only means through which GSS-API functions can be realized with a particular underlying technology, and do not demonstrate all GSS-API features with each technology. Document Expiration: 15 December 1992 53 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 3.1 Kerberos V5, single-TGT OS-specific login functions yield a TGT to the local realm Ker- beros server; TGT is placed in a credentials structure for the client. Client calls GSS_Acquire_cred() to acquire a cred_ handle in order to reference the credentials for use in estab- lishing security contexts. Client calls GSS_Init_sec_context(). If the requested service is located in a different realm, GSS_Init_sec_context() gets the necessary TGT/key pairs needed to traverse the path from local to target realm; these data are placed in the owner's TGT cache. After any needed remote realm resolution, GSS_Init_sec_ context() yields a service ticket to the requested service with a corresponding session key; these data are stored in conjunc- tion with the context. GSS-API code sends KRB_TGS_REQ request(s) and receives KRB_TGS_REP response(s) (in the successful case) or KRB_ERROR. Assuming success, GSS_Init_sec_context() builds a Kerberos- formatted KRB_AP_REQ message, and returns it in output_token. The client sends the output_token to the service. The service passes the received token as the input_token argu- ment to GSS_Accept_sec_context(), which verifies the authen- ticator, provides the service with the client's authenticated name, and returns an output_context_handle. Both parties now hold the session key associated with the ser- vice ticket, and can use this key in subsequent GSS_Sign(), GSS_Verify(), GSS_Seal(), and GSS_Unseal() operations. 54 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) 3.2 Kerberos V5, double-TGT TGT acquisition as above. Note: To avoid unnecessary frequent invocations of error paths when implementing the GSS-API atop Kerberos V5, it seems appro- priate to represent "single-TGT K-V5" and "double-TGT K-V5" with separate mech_types, and this discussion makes that assumption. Based on the (specified or defaulted) mech_type, GSS_Init_ sec_context() determines that the double-TGT protocol should be employed for the specified target. GSS_Init_sec_context() returns GSS_CONTINUE_NEEDED major_status[8], and its returned output_token contains a request to the service for the service's TGT. (If a service TGT with suitably long remaining lifetime already exists in a cache, it may be usable, obviating the need for this step.) The client passes the output_token to the service. The service passes the received token as the input_token ar- gument to GSS_Accept_sec_context(), which recognizes it as a request for TGT. (Note that current Kerberos V5 defines no intra-protocol mechanism to represent such a request.) GSS_ Accept_sec_context() returns GSS_CONTINUE_NEEDED major_status and provides the service's TGT in its output_token. The service sends the output_token to the client. The client passes the received token as the input_token argument to a continuation of GSS_Init_sec_context(). GSS_Init_sec_ context() caches the received service TGT and uses it as part of a service ticket request to the Kerberos authentication server, storing the returned service ticket and session key in conjunction with the context. GSS_Init_sec_context() builds ___________________ [8] This scenario illustrates a different use for the GSS_ CONTINUE_NEEDED status return facility than for support of mutual authentication; note that both uses can coexist as successive operations within a single context establishment operation. Document Expiration: 15 December 1992 55 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) a Kerberos-formatted authenticator, and returns it in output_ token along with GSS_COMPLETE return major_status. The client sends the output_token to the service. Service passes the received token as the input_token argument to a continuation call to GSS_Accept_sec_context(). GSS_Accept_ sec_context() verifies the authenticator, provides the service with the client's authenticated name, and returns major_status GSS_COMPLETE. GSS_Sign(), GSS_Verify(), GSS_Seal(), and GSS_Unseal() as above. 3.3 X.509 Authentication Framework This example illustrates use of the GSS-API in conjunction with public-key mechanisms, consistent with the X.509 Directory Authentication Framework. The GSS_Acquire_cred() call establishes a credentials struc- ture, making the client's private key accessible for use on behalf of the client. The client calls GSS_Init_sec_context(), which interrogates the Directory to acquire (and validate) a chain of public-key certificates, thereby collecting the public key of the service. The certificate validation operation determines that suitable signatures were applied by trusted authorities and that those certificates have not expired. GSS_Init_sec_context() generates a secret key for use in per-message protection operations on the context, and enciphers that secret key under the service's public key. The enciphered secret key, along with an authenticator quantity signed with the client's private key, is included in the out- put_token from GSS_Init_sec_context(). The output_token also carries a certification path, consisting of a certificate chain leading from the service to the client; a variant approach would 56 Document Expiration: 15 December 1992 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) defer this path resolution to be performed by the service in- stead of being asserted by the client. The client application sends the output_token to the service. The service passes the received token as the input_token ar- gument to GSS_Accept_sec_context(). GSS_Accept_sec_context() validates the certification path, and as a result determines a certified binding between the client's distinguished name and the client's public key. Given that public key, GSS_Accept_sec_ context() can process the input_token's authenticator quantity and verify that the client's private key was used to sign the input_token. At this point, the client is authenticated to the service. The service uses its private key to decipher the en- ciphered secret key provided to it for per-message protection operations on the context. The client calls GSS_Sign() or GSS_Seal() on a data mes- sage, which causes per-message authentication, integrity, and (optional) confidentiality facilities to be applied to that message. The service uses the context's shared secret key to perform corresponding GSS_Verify() and GSS_Unseal() calls. 4 Related Activities In order to implement the GSS-API atop existing, emerging, and future security mechanisms: o object identifiers must be assigned to candidate GSS-API mechanisms and the name types which they support o concrete data element formats must be defined for candidate mechanisms (encapsulation within the mechanism-independent token format definition in Appendix B of this document is recommended to mechanism designers) Calling applications must implement formatting conventions which will enable them to distinguish GSS-API tokens from other data carried in their application protocols. Document Expiration: 15 December 1992 57 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) Concrete language bindings are required for the programming en- vironments in which the GSS-API is to be employed; such bindings for the C language are available in an associated Internet- Draft. 5 Acknowledgments This proposal is the result of a collaborative effort. Acknowl- edgments are due to the many members of the IETF Security Area Advisory Group (SAAG) and the Common Authentication Technology (CAT) Working Group for their contributions at meetings and by electronic mail. Acknowledgments are also due to Kannan Ala- gappan, Doug Barlow, Bill Brown, Cliff Kahn, Charlie Kaufman, Butler Lampson, Richard Pitkin, Joe Tardo, and John Wray of Digital Equipment Corporation, and John Carr, John Kohl, Jon Rochlis, Jeff Schiller, and Ted T'so of MIT and Project Athena. Joe Pato and Bill Sommerfeld of HP/Apollo, Walt Tuvell of OSF, and Bill Griffith and Mike Merritt of AT&T, provided inputs which helped to focus and clarify directions. Precursor work by Richard Pitkin, presented to meetings of the Trusted Systems Interoperability Group (TSIG), helped to demonstrate the value of a generic, mechanism-independent security service API. 58 Document Expiration: 15 December 1992 APPENDIX A PACS AND AUTHORIZATION SERVICES Consideration has been given to modifying the GSS-API service interface to recognize and manipulate Privilege Attribute Cer- tificates (PACs) as in ECMA 138, carrying authorization data as a side effect of establishing a security context, but no such modifications have been incorporated at this time. This appendix provides rationale for this decision and discusses compatibility alternatives between PACs and the GSS-API which do not require that PACs be made visible to GSS-API callers. Existing candidate mechanism types such as Kerberos and X.509 do not incorporate PAC manipulation features, and exclusion of such mechanisms from the set of candidates equipped to fully support the GSS-API seems inappropriate. Inclusion (and GSS- API visibility) of a feature supported by only a limited number of mechanisms could encourage the development of ostensibly portable applications which would in fact have only limited portability. The status quo, in which PACs are not visible across the GSS-API interface, does not preclude implementations in which PACs are carried transparently, within the tokens defined and used for certain mech_types, and stored within peers' credentials and context-level data structures. While invisible to API callers, such PACs could be used by operating system or other local functions as inputs in the course of mediating access requests made by callers. This course of action allows dynamic selection of PAC contents, if such selection is administratively-directed rather than caller-directed. PACs and Authorization Services 59 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) In a distributed computing environment, authentication must span different systems; the need for such authentication pro- vides motivation for GSS-API definition and usage. Heterogeneous systems in a network can intercommunicate, with globally au- thenticated names comprising the common bond between locally defined access control policies. Access control policies to which authentication provides inputs are often local, or spe- cific to particular operating systems or environments. If the GSS-API made particular authorization models visible across its service interface, its scope of application would become less general. The current GSS-API paradigm is consistent with the precedent set by Kerberos, neither defining the interpretation of authorization-related data nor enforcing access controls based on such data. The GSS-API is a general interface, whose callers may reside inside or outside any defined TCB or NTCB boundaries. Given this characteristic, it appears more realistic to provide facilities which provide "value-added" security services to its callers than to offer facilities which enforce restrictions on those callers. Authorization decisions must often be mediated below the GSS-API level in a local manner against (or in spite of) applications, and cannot be selectively invoked or omitted at those applications' discretion. Given that the GSS-API's placement prevents it from providing a comprehensive solution to the authorization issue, the value of a partial contribution specific to particular authorization models is debatable. 60 PACs and Authorization Services APPENDIX B MECHANISM-INDEPENDENT TOKEN FORMAT This appendix specifies a mechanism-independent level of en- capsulating representation for the initial token of a GSS-API context establishment sequence, incorporating an identifier of the mechanism type to be used on that context. Use of this format (with ASN.1-encoded data elements represented in BER, constrained in the interests of parsing simplicity to the Dis- tinguished Encoding Rule (DER) BER subset defined in X.509, clause 8.7) is recommended to the designers of GSS-API imple- mentations based on various mechanisms, so that tokens can be interpreted unambiguously at GSS-API peers. There is no require- ment that the mechanism-specific innerContextToken, innerMs- gToken, and sealedUserData data elements be encoded in ASN.1 BER. -- optional top-level token definitions to -- frame different mechanisms GSS-API DEFINITIONS ::= BEGIN MechType ::= OBJECT IDENTIFIER -- data structure definitions -- callers must be able to distinguish among -- InitialContextToken, SubsequentContextToken, -- PerMsgToken, and SealedMessage data elements -- based on the usage in which they occur Mechanism-Independent Token Format 61 Generic Security Service API: Internet-Draft Common Authentication Technology WG: John Linn (DEC) InitialContextToken ::= -- option indication (delegation, etc.) indicated within -- mechanism-specific token [APPLICATION 0] IMPLICIT SEQUENCE { thisMech MechType, innerContextToken ANY DEFINED BY thisMech -- contents mechanism-specific } SubsequentContextToken ::= innerContextToken ANY -- interpretation based on predecessor InitialContextToken PerMsgToken ::= -- as emitted by GSS_Sign and processed by GSS_Verify innerMsgToken ANY SealedMessage ::= -- as emitted by GSS_Seal and processed by GSS_Unseal -- includes internal, mechanism-defined indicator -- of whether or not encrypted sealedUserData ANY END 62 Mechanism-Independent Token Format