/* linux/kernel/blk_drv/mcd.c - Mitsumi CDROM driver Copyright (C) 1992 Martin Harriss martin@bdsi.com (no longer valid - where are you now, Martin?) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. HISTORY 0.1 First attempt - internal use only 0.2 Cleaned up delays and use of timer - alpha release 0.3 Audio support added 0.3.1 Changes for mitsumi CRMC LU005S march version (stud11@cc4.kuleuven.ac.be) 0.3.2 bug fixes to the ioctls and merged with ALPHA0.99-pl12 (Jon Tombs ) 0.3.3 Added more #defines and mcd_setup() (Jon Tombs ) October 1993 Bernd Huebner and Ruediger Helsch, Unifix Software GmbH, Braunschweig, Germany: rework to speed up data read operation. Also enabled definition of irq and address from bootstrap, using the environment. November 93 added code for FX001 S,D (single & double speed). February 94 added code for broken M 5/6 series of 16-bit single speed. 0.4 Added support for loadable MODULEs, so mcd can now also be loaded by insmod and removed by rmmod during runtime. Werner Zimmermann (zimmerma@rz.fht-esslingen.de), Mar. 26, 95 0.5 I added code for FX001 D to drop from double speed to single speed when encountering errors... this helps with some "problematic" CD's that are supposedly "OUT OF TOLERANCE" (but are really shitty presses!) severely scratched, or possibly slightly warped! I have noticed that the Mitsumi 2x/4x drives are just less tolerant and the firmware is not smart enough to drop speed, so let's just kludge it with software! ****** THE 4X SPEED MITSUMI DRIVES HAVE THE SAME PROBLEM!!!!!! ****** Anyone want to "DONATE" one to me?! ;) I hear sometimes they are even WORSE! ;) ** HINT... HINT... TAKE NOTES MITSUMI This could save some hassles with certain "large" CD's that have data on the outside edge in your DOS DRIVERS .... Accuracy counts... speed is secondary ;) 17 June 95 Modifications By Andrew J. Kroll 07 July 1995 Modifications by Andrew J. Kroll Bjorn Ekwall added unregister_blkdev to mcd_init() Michael K. Johnson added retries on open for slow drives which take a while to recognize that they contain a CD. November 1997 -- ported to the Uniform CD-ROM driver by Erik Andersen. */ #include #include #include #include #include #include #include #include #include #include #include #include #include /* #define REALLY_SLOW_IO */ #include #include #include #define MAJOR_NR MITSUMI_CDROM_MAJOR #include #define mcd_port mcd /* for compatible parameter passing with "insmod" */ #include "mcd.h" static int mcd_blocksizes[1] = { 0, }; /* I added A flag to drop to 1x speed if too many errors 0 = 1X ; 1 = 2X */ static int mcdDouble = 0; /* How many sectors to hold at 1x speed counter */ static int mcd1xhold = 0; /* Is the drive connected properly and responding?? */ static int mcdPresent = 0; #if 0 #define TEST1 /* */ #define TEST2 /* do_mcd_req */ #define TEST3 */ /* MCD_S_state */ #define TEST4 /* QUICK_LOOP-counter */ #define TEST5 */ /* port(1) state */ #endif #if 1 #define QUICK_LOOP_DELAY udelay(45) /* use udelay */ #define QUICK_LOOP_COUNT 20 #else #define QUICK_LOOP_DELAY #define QUICK_LOOP_COUNT 140 /* better wait constant time */ #endif /* #define DOUBLE_QUICK_ONLY */ #define CURRENT_VALID \ (CURRENT && MAJOR(CURRENT -> rq_dev) == MAJOR_NR && CURRENT -> cmd == READ \ && CURRENT -> sector != -1) #define MFL_STATUSorDATA (MFL_STATUS | MFL_DATA) #define MCD_BUF_SIZ 16 static volatile int mcd_transfer_is_active; static char mcd_buf[2048*MCD_BUF_SIZ]; /* buffer for block size conversion */ static volatile int mcd_buf_bn[MCD_BUF_SIZ], mcd_next_bn; static volatile int mcd_buf_in, mcd_buf_out = -1; static volatile int mcd_error; static int mcd_open_count; enum mcd_state_e { MCD_S_IDLE, /* 0 */ MCD_S_START, /* 1 */ MCD_S_MODE, /* 2 */ MCD_S_READ, /* 3 */ MCD_S_DATA, /* 4 */ MCD_S_STOP, /* 5 */ MCD_S_STOPPING /* 6 */ }; static volatile enum mcd_state_e mcd_state = MCD_S_IDLE; static int mcd_mode = -1; static int MCMD_DATA_READ= MCMD_PLAY_READ; #define READ_TIMEOUT 3000 #define WORK_AROUND_MITSUMI_BUG_92 #define WORK_AROUND_MITSUMI_BUG_93 #ifdef WORK_AROUND_MITSUMI_BUG_93 int mitsumi_bug_93_wait = 0; #endif /* WORK_AROUND_MITSUMI_BUG_93 */ static short mcd_port = MCD_BASE_ADDR; /* used as "mcd" by "insmod" */ static int mcd_irq = MCD_INTR_NR; /* must directly follow mcd_port */ MODULE_PARM(mcd, "1-2i"); static int McdTimeout, McdTries; static struct wait_queue *mcd_waitq = NULL; static struct mcd_DiskInfo DiskInfo; static struct mcd_Toc Toc[MAX_TRACKS]; static struct mcd_Play_msf mcd_Play; static int audioStatus; static char mcdDiskChanged; static char tocUpToDate; static char mcdVersion; static void mcd_transfer(void); static void mcd_poll(void); static void mcd_invalidate_buffers(void); static void hsg2msf(long hsg, struct msf *msf); static void bin2bcd(unsigned char *p); static int bcd2bin(unsigned char bcd); static int mcdStatus(void); static void sendMcdCmd(int cmd, struct mcd_Play_msf *params); static int getMcdStatus(int timeout); static int GetQChannelInfo(struct mcd_Toc *qp); static int updateToc(void); static int GetDiskInfo(void); static int GetToc(void); static int getValue(unsigned char *result); static int mcd_open(struct cdrom_device_info * cdi, int purpose); static void mcd_release(struct cdrom_device_info * cdi); static int mcd_media_changed(struct cdrom_device_info * cdi, int disc_nr); static int mcd_tray_move(struct cdrom_device_info * cdi, int position); int mcd_audio_ioctl(struct cdrom_device_info * cdi, unsigned int cmd, void * arg); int mcd_drive_status(struct cdrom_device_info * cdi, int slot_nr); static struct cdrom_device_ops mcd_dops = { mcd_open, /* open */ mcd_release, /* release */ mcd_drive_status, /* drive status */ //NULL, /* drive status */ mcd_media_changed, /* media changed */ mcd_tray_move, /* tray move */ NULL, /* lock door */ NULL, /* select speed */ NULL, /* select disc */ NULL, /* get last session */ NULL, /* get universal product code */ NULL, /* hard reset */ mcd_audio_ioctl, /* audio ioctl */ NULL, /* device-specific ioctl */ CDC_OPEN_TRAY | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_DRIVE_STATUS, /* capability */ 0, /* number of minor devices */ }; static struct cdrom_device_info mcd_info = { &mcd_dops, /* device operations */ NULL, /* link */ NULL, /* handle */ 0, /* dev */ 0, /* mask */ 2, /* maximum speed */ 1, /* number of discs */ 0, /* options, not owned */ 0, /* mc_flags, not owned */ 0, /* use count, not owned */ "mcd", /* name of the device type */ }; __initfunc(void mcd_setup(char *str, int *ints)) { if (ints[0] > 0) mcd_port = ints[1]; if (ints[0] > 1) mcd_irq = ints[2]; #ifdef WORK_AROUND_MITSUMI_BUG_93 if (ints[0] > 2) mitsumi_bug_93_wait = ints[3]; #endif /* WORK_AROUND_MITSUMI_BUG_93 */ } static int mcd_media_changed(struct cdrom_device_info * cdi, int disc_nr) { int retval; #if 1 /* the below is not reliable */ return 0; #endif if (cdi->dev) { printk("mcd: Mitsumi CD-ROM request error: invalid device.\n"); return 0; } retval = mcdDiskChanged; mcdDiskChanged = 0; return retval; } /* * Do a 'get status' command and get the result. Only use from the top half * because it calls 'getMcdStatus' which sleeps. */ static int statusCmd(void) { int st, retry; for (retry = 0; retry < MCD_RETRY_ATTEMPTS; retry++) { outb(MCMD_GET_STATUS, MCDPORT(0)); /* send get-status cmd */ st = getMcdStatus(MCD_STATUS_DELAY); if (st != -1) break; } return st; } /* * Send a 'Play' command and get the status. Use only from the top half. */ static int mcdPlay(struct mcd_Play_msf *arg) { int retry, st; for (retry = 0; retry < MCD_RETRY_ATTEMPTS; retry++) { sendMcdCmd(MCMD_PLAY_READ, arg); st = getMcdStatus(2 * MCD_STATUS_DELAY); if (st != -1) break; } return st; } static int mcd_tray_move(struct cdrom_device_info * cdi, int position) { int i; if (position) { /* Eject */ /* all drives can at least stop! */ if (audioStatus == CDROM_AUDIO_PLAY) { outb(MCMD_STOP, MCDPORT(0)); i = getMcdStatus(MCD_STATUS_DELAY); } audioStatus = CDROM_AUDIO_NO_STATUS; outb(MCMD_EJECT, MCDPORT(0)); /* * the status (i) shows failure on all but the FX drives. * But nothing we can do about that in software! * So just read the status and forget it. - Jon. */ i = getMcdStatus(MCD_STATUS_DELAY); return 0; } else return -EINVAL; } long msf2hsg(struct msf *mp) { return bcd2bin(mp -> frame) + bcd2bin(mp -> sec) * 75 + bcd2bin(mp -> min) * 4500 - 150; } int mcd_audio_ioctl(struct cdrom_device_info * cdi, unsigned int cmd, void * arg) { int i, st; struct mcd_Toc qInfo; struct cdrom_ti *ti; struct cdrom_tochdr *tocHdr; struct cdrom_msf *msf; struct cdrom_subchnl *subchnl; struct cdrom_tocentry *entry; struct mcd_Toc *tocPtr; struct cdrom_volctrl *volctrl; st = statusCmd(); if (st < 0) return -EIO; if (!tocUpToDate) { i = updateToc(); if (i < 0) return i; /* error reading TOC */ } switch (cmd) { case CDROMSTART: /* Spin up the drive */ /* Don't think we can do this. Even if we could, * I think the drive times out and stops after a while * anyway. For now, ignore it. */ return 0; case CDROMSTOP: /* Spin down the drive */ outb(MCMD_STOP, MCDPORT(0)); i = getMcdStatus(MCD_STATUS_DELAY); /* should we do anything if it fails? */ audioStatus = CDROM_AUDIO_NO_STATUS; return 0; case CDROMPAUSE: /* Pause the drive */ if (audioStatus != CDROM_AUDIO_PLAY) return -EINVAL; outb(MCMD_STOP, MCDPORT(0)); i = getMcdStatus(MCD_STATUS_DELAY); if (GetQChannelInfo(&qInfo) < 0) { /* didn't get q channel info */ audioStatus = CDROM_AUDIO_NO_STATUS; return 0; } mcd_Play.start = qInfo.diskTime; /* remember restart point */ audioStatus = CDROM_AUDIO_PAUSED; return 0; case CDROMRESUME: /* Play it again, Sam */ if (audioStatus != CDROM_AUDIO_PAUSED) return -EINVAL; /* restart the drive at the saved position. */ i = mcdPlay(&mcd_Play); if (i < 0) { audioStatus = CDROM_AUDIO_ERROR; return -EIO; } audioStatus = CDROM_AUDIO_PLAY; return 0; case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */ ti=(struct cdrom_ti *) arg; if (ti->cdti_trk0 < DiskInfo.first || ti->cdti_trk0 > DiskInfo.last || ti->cdti_trk1 < ti->cdti_trk0) { return -EINVAL; } if (ti->cdti_trk1 > DiskInfo.last) ti->cdti_trk1 = DiskInfo.last; mcd_Play.start = Toc[ti->cdti_trk0].diskTime; mcd_Play.end = Toc[ti->cdti_trk1 + 1].diskTime; #ifdef MCD_DEBUG printk("play: %02x:%02x.%02x to %02x:%02x.%02x\n", mcd_Play.start.min, mcd_Play.start.sec, mcd_Play.start.frame, mcd_Play.end.min, mcd_Play.end.sec, mcd_Play.end.frame); #endif i = mcdPlay(&mcd_Play); if (i < 0) { audioStatus = CDROM_AUDIO_ERROR; return -EIO; } audioStatus = CDROM_AUDIO_PLAY; return 0; case CDROMPLAYMSF: /* Play starting at the given MSF address. */ if (audioStatus == CDROM_AUDIO_PLAY) { outb(MCMD_STOP, MCDPORT(0)); i = getMcdStatus(MCD_STATUS_DELAY); audioStatus = CDROM_AUDIO_NO_STATUS; } msf=(struct cdrom_msf *) arg; /* convert to bcd */ bin2bcd(&msf->cdmsf_min0); bin2bcd(&msf->cdmsf_sec0); bin2bcd(&msf->cdmsf_frame0); bin2bcd(&msf->cdmsf_min1); bin2bcd(&msf->cdmsf_sec1); bin2bcd(&msf->cdmsf_frame1); mcd_Play.start.min = msf->cdmsf_min0; mcd_Play.start.sec = msf->cdmsf_sec0; mcd_Play.start.frame = msf->cdmsf_frame0; mcd_Play.end.min = msf->cdmsf_min1; mcd_Play.end.sec = msf->cdmsf_sec1; mcd_Play.end.frame = msf->cdmsf_frame1; #ifdef MCD_DEBUG printk("play: %02x:%02x.%02x to %02x:%02x.%02x\n", mcd_Play.start.min, mcd_Play.start.sec, mcd_Play.start.frame, mcd_Play.end.min, mcd_Play.end.sec, mcd_Play.end.frame); #endif i = mcdPlay(&mcd_Play); if (i < 0) { audioStatus = CDROM_AUDIO_ERROR; return -EIO; } audioStatus = CDROM_AUDIO_PLAY; return 0; case CDROMREADTOCHDR: /* Read the table of contents header */ tocHdr=(struct cdrom_tochdr *) arg; tocHdr->cdth_trk0 = DiskInfo.first; tocHdr->cdth_trk1 = DiskInfo.last; return 0; case CDROMREADTOCENTRY: /* Read an entry in the table of contents */ entry=(struct cdrom_tocentry *) arg; if (entry->cdte_track == CDROM_LEADOUT) tocPtr = &Toc[DiskInfo.last - DiskInfo.first + 1]; else if (entry->cdte_track > DiskInfo.last || entry->cdte_track < DiskInfo.first) return -EINVAL; else tocPtr = &Toc[entry->cdte_track]; entry->cdte_adr = tocPtr -> ctrl_addr; entry->cdte_ctrl = tocPtr -> ctrl_addr >> 4; if (entry->cdte_format == CDROM_LBA) entry->cdte_addr.lba = msf2hsg(&tocPtr -> diskTime); else if (entry->cdte_format == CDROM_MSF) { entry->cdte_addr.msf.minute = bcd2bin(tocPtr -> diskTime.min); entry->cdte_addr.msf.second = bcd2bin(tocPtr -> diskTime.sec); entry->cdte_addr.msf.frame = bcd2bin(tocPtr -> diskTime.frame); } else return -EINVAL; return 0; case CDROMSUBCHNL: /* Get subchannel info */ subchnl=(struct cdrom_subchnl *) arg; if (GetQChannelInfo(&qInfo) < 0) return -EIO; subchnl->cdsc_audiostatus = audioStatus; subchnl->cdsc_adr = qInfo.ctrl_addr; subchnl->cdsc_ctrl = qInfo.ctrl_addr >> 4; subchnl->cdsc_trk = bcd2bin(qInfo.track); subchnl->cdsc_ind = bcd2bin(qInfo.pointIndex); subchnl->cdsc_absaddr.msf.minute = bcd2bin(qInfo.diskTime.min); subchnl->cdsc_absaddr.msf.second = bcd2bin(qInfo.diskTime.sec); subchnl->cdsc_absaddr.msf.frame = bcd2bin(qInfo.diskTime.frame); subchnl->cdsc_reladdr.msf.minute = bcd2bin(qInfo.trackTime.min); subchnl->cdsc_reladdr.msf.second = bcd2bin(qInfo.trackTime.sec); subchnl->cdsc_reladdr.msf.frame = bcd2bin(qInfo.trackTime.frame); return(0); case CDROMVOLCTRL: /* Volume control */ volctrl=(struct cdrom_volctrl *) arg; outb(MCMD_SET_VOLUME, MCDPORT(0)); outb(volctrl->channel0, MCDPORT(0)); outb(255, MCDPORT(0)); outb(volctrl->channel1, MCDPORT(0)); outb(255, MCDPORT(0)); i = getMcdStatus(MCD_STATUS_DELAY); if (i < 0) return -EIO; { char a, b, c, d; getValue(&a); getValue(&b); getValue(&c); getValue(&d); } return 0; default: return -EINVAL; } } /* * Take care of the different block sizes between cdrom and Linux. * When Linux gets variable block sizes this will probably go away. */ static void mcd_transfer(void) { if (CURRENT_VALID) { while (CURRENT -> nr_sectors) { int bn = CURRENT -> sector / 4; int i; for (i = 0; i < MCD_BUF_SIZ && mcd_buf_bn[i] != bn; ++i) ; if (i < MCD_BUF_SIZ) { int offs = (i * 4 + (CURRENT -> sector & 3)) * 512; int nr_sectors = 4 - (CURRENT -> sector & 3); if (mcd_buf_out != i) { mcd_buf_out = i; if (mcd_buf_bn[i] != bn) { mcd_buf_out = -1; continue; } } if (nr_sectors > CURRENT -> nr_sectors) nr_sectors = CURRENT -> nr_sectors; memcpy(CURRENT -> buffer, mcd_buf + offs, nr_sectors * 512); CURRENT -> nr_sectors -= nr_sectors; CURRENT -> sector += nr_sectors; CURRENT -> buffer += nr_sectors * 512; } else { mcd_buf_out = -1; break; } } } } /* * We only seem to get interrupts after an error. * Just take the interrupt and clear out the status reg. */ static void mcd_interrupt(int irq, void *dev_id, struct pt_regs * regs) { int st; st = inb(MCDPORT(1)) & 0xFF; #ifdef TEST1 printk("", st); #endif if (!(st & MFL_STATUS)) { st = inb(MCDPORT(0)) & 0xFF; #ifdef TEST1 printk("", st); #endif if ((st & 0xFF) != 0xFF) mcd_error = st ? st & 0xFF : -1; } } static void do_mcd_request(void) { #ifdef TEST2 printk(" do_mcd_request(%ld+%ld)\n", CURRENT -> sector, CURRENT -> nr_sectors); #endif mcd_transfer_is_active = 1; while (CURRENT_VALID) { if (CURRENT->bh) { if (!buffer_locked(CURRENT->bh)) panic(DEVICE_NAME ": block not locked"); } mcd_transfer(); if (CURRENT -> nr_sectors == 0) { end_request(1); } else { mcd_buf_out = -1; /* Want to read a block not in buffer */ if (mcd_state == MCD_S_IDLE) { if (!tocUpToDate) { if (updateToc() < 0) { while (CURRENT_VALID) end_request(0); break; } } mcd_state = MCD_S_START; McdTries = 5; SET_TIMER(mcd_poll, 1); } break; } } mcd_transfer_is_active = 0; #ifdef TEST2 printk(" do_mcd_request ends\n"); #endif } static void mcd_poll(void) { int st; if (mcd_error) { if (mcd_error & 0xA5) { printk("mcd: I/O error 0x%02x", mcd_error); if (mcd_error & 0x80) printk(" (Door open)"); if (mcd_error & 0x20) printk(" (Disk changed)"); if (mcd_error & 0x04) { printk(" (Read error)"); /* Bitch about the problem. */ /* Time to get fancy! If at 2x speed and 1 error, drop to 1x speed! */ /* Interesting how it STAYS at MCD_RETRY_ATTEMPTS on first error! */ /* But I find that rather HANDY!!! */ /* Neat! it REALLY WORKS on those LOW QUALITY CD's!!! Smile! :) */ /* AJK [06/17/95] */ /* Slap the CD down to single speed! */ if (mcdDouble == 1 && McdTries == MCD_RETRY_ATTEMPTS && MCMD_DATA_READ == MCMD_2X_READ) { MCMD_DATA_READ = MCMD_PLAY_READ; /* Uhhh, Ummmm, muhuh-huh! */ mcd1xhold = SINGLE_HOLD_SECTORS; /* Hey Beavis! */ printk(" Speed now 1x"); /* Pull my finger! */ } } printk("\n"); mcd_invalidate_buffers(); #ifdef WARN_IF_READ_FAILURE if (McdTries == MCD_RETRY_ATTEMPTS) printk("mcd: read of block %d failed\n", mcd_next_bn); #endif if (!McdTries--) { /* Nuts! This cd is ready for recycling! */ /* When WAS the last time YOU cleaned it CORRECTLY?! */ printk("mcd: read of block %d failed, giving up\n", mcd_next_bn); if (mcd_transfer_is_active) { McdTries = 0; goto ret; } if (CURRENT_VALID) end_request(0); McdTries = MCD_RETRY_ATTEMPTS; } } mcd_error = 0; mcd_state = MCD_S_STOP; } /* Switch back to Double speed if enough GOOD sectors were read! */ /* Are we a double speed with a crappy CD?! */ if (mcdDouble == 1 && McdTries == MCD_RETRY_ATTEMPTS && MCMD_DATA_READ == MCMD_PLAY_READ) { /* We ARE a double speed and we ARE bitching! */ if (mcd1xhold == 0) /* Okay, Like are we STILL at single speed? */ { /* We need to switch back to double speed now... */ MCMD_DATA_READ = MCMD_2X_READ; /* Uhhh... BACK You GO! */ printk("mcd: Switching back to 2X speed!\n"); /* Tell 'em! */ } else mcd1xhold--; /* No?! Count down the good reads some more... */ /* and try, try again! */ } immediately: switch (mcd_state) { case MCD_S_IDLE: #ifdef TEST3 printk("MCD_S_IDLE\n"); #endif return; case MCD_S_START: #ifdef TEST3 printk("MCD_S_START\n"); #endif outb(MCMD_GET_STATUS, MCDPORT(0)); mcd_state = mcd_mode == 1 ? MCD_S_READ : MCD_S_MODE; McdTimeout = 3000; break; case MCD_S_MODE: #ifdef TEST3 printk("MCD_S_MODE\n"); #endif if ((st = mcdStatus()) != -1) { if (st & MST_DSK_CHG) { mcdDiskChanged = 1; tocUpToDate = 0; mcd_invalidate_buffers(); } set_mode_immediately: if ((st & MST_DOOR_OPEN) || !(st & MST_READY)) { mcdDiskChanged = 1; tocUpToDate = 0; if (mcd_transfer_is_active) { mcd_state = MCD_S_START; goto immediately; } printk((st & MST_DOOR_OPEN) ? "mcd: door open\n" : "mcd: disk removed\n"); mcd_state = MCD_S_IDLE; while (CURRENT_VALID) end_request(0); return; } outb(MCMD_SET_MODE, MCDPORT(0)); outb(1, MCDPORT(0)); mcd_mode = 1; mcd_state = MCD_S_READ; McdTimeout = 3000; } break; case MCD_S_READ: #ifdef TEST3 printk("MCD_S_READ\n"); #endif if ((st = mcdStatus()) != -1) { if (st & MST_DSK_CHG) { mcdDiskChanged = 1; tocUpToDate = 0; mcd_invalidate_buffers(); } read_immediately: if ((st & MST_DOOR_OPEN) || !(st & MST_READY)) { mcdDiskChanged = 1; tocUpToDate = 0; if (mcd_transfer_is_active) { mcd_state = MCD_S_START; goto immediately; } printk((st & MST_DOOR_OPEN) ? "mcd: door open\n" : "mcd: disk removed\n"); mcd_state = MCD_S_IDLE; while (CURRENT_VALID) end_request(0); return; } if (CURRENT_VALID) { struct mcd_Play_msf msf; mcd_next_bn = CURRENT -> sector / 4; hsg2msf(mcd_next_bn, &msf.start); msf.end.min = ~0; msf.end.sec = ~0; msf.end.frame = ~0; sendMcdCmd(MCMD_DATA_READ, &msf); mcd_state = MCD_S_DATA; McdTimeout = READ_TIMEOUT; } else { mcd_state = MCD_S_STOP; goto immediately; } } break; case MCD_S_DATA: #ifdef TEST3 printk("MCD_S_DATA\n"); #endif st = inb(MCDPORT(1)) & (MFL_STATUSorDATA); data_immediately: #ifdef TEST5 printk("Status %02x\n",st); #endif switch (st) { case MFL_DATA: #ifdef WARN_IF_READ_FAILURE if (McdTries == 5) printk("mcd: read of block %d failed\n", mcd_next_bn); #endif if (!McdTries--) { printk("mcd: read of block %d failed, giving up\n", mcd_next_bn); if (mcd_transfer_is_active) { McdTries = 0; break; } if (CURRENT_VALID) end_request(0); McdTries = 5; } mcd_state = MCD_S_START; McdTimeout = READ_TIMEOUT; goto immediately; case MFL_STATUSorDATA: break; default: McdTries = 5; if (!CURRENT_VALID && mcd_buf_in == mcd_buf_out) { mcd_state = MCD_S_STOP; goto immediately; } mcd_buf_bn[mcd_buf_in] = -1; READ_DATA(MCDPORT(0), mcd_buf + 2048 * mcd_buf_in, 2048); mcd_buf_bn[mcd_buf_in] = mcd_next_bn++; if (mcd_buf_out == -1) mcd_buf_out = mcd_buf_in; mcd_buf_in = mcd_buf_in + 1 == MCD_BUF_SIZ ? 0 : mcd_buf_in + 1; if (!mcd_transfer_is_active) { while (CURRENT_VALID) { mcd_transfer(); if (CURRENT -> nr_sectors == 0) end_request(1); else break; } } if (CURRENT_VALID && (CURRENT -> sector / 4 < mcd_next_bn || CURRENT -> sector / 4 > mcd_next_bn + 16)) { mcd_state = MCD_S_STOP; goto immediately; } McdTimeout = READ_TIMEOUT; #ifdef DOUBLE_QUICK_ONLY if (MCMD_DATA_READ != MCMD_PLAY_READ) #endif { int count= QUICK_LOOP_COUNT; while (count--) { QUICK_LOOP_DELAY; if ((st = (inb(MCDPORT(1))) & (MFL_STATUSorDATA)) != (MFL_STATUSorDATA)) { # ifdef TEST4 /* printk("Quickloop success at %d\n",QUICK_LOOP_COUNT-count); */ printk(" %d ",QUICK_LOOP_COUNT-count); # endif goto data_immediately; } } # ifdef TEST4 /* printk("Quickloop ended at %d\n",QUICK_LOOP_COUNT); */ printk("ended "); # endif } break; } break; case MCD_S_STOP: #ifdef TEST3 printk("MCD_S_STOP\n"); #endif #ifdef WORK_AROUND_MITSUMI_BUG_93 if (!mitsumi_bug_93_wait) goto do_not_work_around_mitsumi_bug_93_1; McdTimeout = mitsumi_bug_93_wait; mcd_state = 9+3+1; break; case 9+3+1: if (McdTimeout) break; do_not_work_around_mitsumi_bug_93_1: #endif /* WORK_AROUND_MITSUMI_BUG_93 */ outb(MCMD_STOP, MCDPORT(0)); #ifdef WORK_AROUND_MITSUMI_BUG_92 if ((inb(MCDPORT(1)) & MFL_STATUSorDATA) == MFL_STATUS) { int i = 4096; do { inb(MCDPORT(0)); } while ((inb(MCDPORT(1)) & MFL_STATUSorDATA) == MFL_STATUS && --i); outb(MCMD_STOP, MCDPORT(0)); if ((inb(MCDPORT(1)) & MFL_STATUSorDATA) == MFL_STATUS) { i = 4096; do { inb(MCDPORT(0)); } while ((inb(MCDPORT(1)) & MFL_STATUSorDATA) == MFL_STATUS && --i); outb(MCMD_STOP, MCDPORT(0)); } } #endif /* WORK_AROUND_MITSUMI_BUG_92 */ mcd_state = MCD_S_STOPPING; McdTimeout = 1000; break; case MCD_S_STOPPING: #ifdef TEST3 printk("MCD_S_STOPPING\n"); #endif if ((st = mcdStatus()) == -1 && McdTimeout) break; if ((st != -1) && (st & MST_DSK_CHG)) { mcdDiskChanged = 1; tocUpToDate = 0; mcd_invalidate_buffers(); } #ifdef WORK_AROUND_MITSUMI_BUG_93 if (!mitsumi_bug_93_wait) goto do_not_work_around_mitsumi_bug_93_2; McdTimeout = mitsumi_bug_93_wait; mcd_state = 9+3+2; break; case 9+3+2: if (McdTimeout) break; st = -1; do_not_work_around_mitsumi_bug_93_2: #endif /* WORK_AROUND_MITSUMI_BUG_93 */ #ifdef TEST3 printk("CURRENT_VALID %d mcd_mode %d\n", CURRENT_VALID, mcd_mode); #endif if (CURRENT_VALID) { if (st != -1) { if (mcd_mode == 1) goto read_immediately; else goto set_mode_immediately; } else { mcd_state = MCD_S_START; McdTimeout = 1; } } else { mcd_state = MCD_S_IDLE; return; } break; default: printk("mcd: invalid state %d\n", mcd_state); return; } ret: if (!McdTimeout--) { printk("mcd: timeout in state %d\n", mcd_state); mcd_state = MCD_S_STOP; } SET_TIMER(mcd_poll, 1); } static void mcd_invalidate_buffers(void) { int i; for (i = 0; i < MCD_BUF_SIZ; ++i) mcd_buf_bn[i] = -1; mcd_buf_out = -1; } /* * Open the device special file. Check that a disk is in. */ static int mcd_open(struct cdrom_device_info * cdi, int purpose) { int st, count=0; if (mcdPresent == 0) return -ENXIO; /* no hardware */ if (!mcd_open_count && mcd_state == MCD_S_IDLE) { mcd_invalidate_buffers(); do { st = statusCmd(); /* check drive status */ if (st == -1) return -EIO; /* drive doesn't respond */ if ((st & MST_READY) == 0) { /* no disk? wait a sec... */ current->state = TASK_INTERRUPTIBLE; current->timeout = jiffies + HZ; schedule(); } } while (((st & MST_READY) == 0) && count++ < MCD_RETRY_ATTEMPTS); if (updateToc() < 0) return -EIO; } ++mcd_open_count; MOD_INC_USE_COUNT; return 0; } /* * On close, we flush all mcd blocks from the buffer cache. */ static void mcd_release(struct cdrom_device_info * cdi) { MOD_DEC_USE_COUNT; if (!--mcd_open_count) { mcd_invalidate_buffers(); } } /* This routine gets called during initialization if things go wrong, * and is used in cleanup_module as well. */ static void cleanup(int level) { switch (level) { case 3: if (unregister_cdrom(&mcd_info)) { printk(KERN_WARNING "Can't unregister cdrom mcd\n"); return; } free_irq(mcd_irq, NULL); case 2: release_region(mcd_port,4); case 1: if (unregister_blkdev(MAJOR_NR, "mcd")) { printk(KERN_WARNING "Can't unregister major mcd\n"); return; } default: } } /* * Test for presence of drive and initialize it. Called at boot time. */ __initfunc(int mcd_init(void)) { int count; unsigned char result[3]; char msg[80]; if (mcd_port <= 0 || mcd_irq <= 0) { printk("skip mcd_init\n"); return -EIO; } if (register_blkdev(MAJOR_NR, "mcd", &cdrom_fops) != 0) { printk("Unable to get major %d for Mitsumi CD-ROM\n", MAJOR_NR); return -EIO; } if (check_region(mcd_port, 4)) { cleanup(1); printk("Init failed, I/O port (%X) already in use\n", mcd_port); return -EIO; } blksize_size[MAJOR_NR] = mcd_blocksizes; blk_dev[MAJOR_NR].request_fn = DEVICE_REQUEST; read_ahead[MAJOR_NR] = 4; /* check for card */ outb(0, MCDPORT(1)); /* send reset */ for (count = 0; count < 2000000; count++) (void) inb(MCDPORT(1)); /* delay a bit */ outb(0x40, MCDPORT(0)); /* send get-stat cmd */ for (count = 0; count < 2000000; count++) if (!(inb(MCDPORT(1)) & MFL_STATUS)) break; if (count >= 2000000) { printk("Init failed. No mcd device at 0x%x irq %d\n", mcd_port, mcd_irq); cleanup(1); return -EIO; } count = inb(MCDPORT(0)); /* pick up the status */ outb(MCMD_GET_VERSION,MCDPORT(0)); for(count=0;count<3;count++) if(getValue(result+count)) { printk("mitsumi get version failed at 0x%d\n", mcd_port); cleanup(1); return -EIO; } if (result[0] == result[1] && result[1] == result[2]) { cleanup(1); return -EIO; } mcdVersion=result[2]; if (mcdVersion >=4) outb(4,MCDPORT(2)); /* magic happens */ /* don't get the IRQ until we know for sure the drive is there */ if (request_irq(mcd_irq, mcd_interrupt, SA_INTERRUPT, "Mitsumi CD", NULL)) { printk("Unable to get IRQ%d for Mitsumi CD-ROM\n", mcd_irq); cleanup(1); return -EIO; } if (result[1] == 'D') { sprintf(msg, " mcd: Mitsumi Double Speed CD-ROM at port=0x%x," " irq=%d\n", mcd_port, mcd_irq); MCMD_DATA_READ = MCMD_2X_READ; mcd_info.speed = 2; /* Added flag to drop to 1x speed if too many errors */ mcdDouble = 1; } else { sprintf(msg, " mcd: Mitsumi Single Speed CD-ROM at port=0x%x," " irq=%d\n", mcd_port, mcd_irq); mcd_info.speed = 2; } request_region(mcd_port, 4, "mcd"); outb(MCMD_CONFIG_DRIVE, MCDPORT(0)); outb(0x02,MCDPORT(0)); outb(0x00,MCDPORT(0)); getValue(result); outb(MCMD_CONFIG_DRIVE, MCDPORT(0)); outb(0x10,MCDPORT(0)); outb(0x04,MCDPORT(0)); getValue(result); mcd_invalidate_buffers(); mcdPresent = 1; mcd_info.dev = MKDEV(MAJOR_NR,0); if (register_cdrom(&mcd_info) != 0) { printk("Cannot register Mitsumi CD-ROM!\n"); cleanup(3); return -EIO; } printk(msg); return 0; } static void hsg2msf(long hsg, struct msf *msf) { hsg += 150; msf -> min = hsg / 4500; hsg %= 4500; msf -> sec = hsg / 75; msf -> frame = hsg % 75; bin2bcd(&msf -> min); /* convert to BCD */ bin2bcd(&msf -> sec); bin2bcd(&msf -> frame); } static void bin2bcd(unsigned char *p) { int u, t; u = *p % 10; t = *p / 10; *p = u | (t << 4); } static int bcd2bin(unsigned char bcd) { return (bcd >> 4) * 10 + (bcd & 0xF); } /* * See if a status is ready from the drive and return it * if it is ready. */ static int mcdStatus(void) { int i; int st; st = inb(MCDPORT(1)) & MFL_STATUS; if (!st) { i = inb(MCDPORT(0)) & 0xFF; return i; } else return -1; } /* * Send a play or read command to the drive */ static void sendMcdCmd(int cmd, struct mcd_Play_msf *params) { outb(cmd, MCDPORT(0)); outb(params -> start.min, MCDPORT(0)); outb(params -> start.sec, MCDPORT(0)); outb(params -> start.frame, MCDPORT(0)); outb(params -> end.min, MCDPORT(0)); outb(params -> end.sec, MCDPORT(0)); outb(params -> end.frame, MCDPORT(0)); } /* * Timer interrupt routine to test for status ready from the drive. * (see the next routine) */ static void mcdStatTimer(void) { if (!(inb(MCDPORT(1)) & MFL_STATUS)) { wake_up(&mcd_waitq); return; } McdTimeout--; if (McdTimeout <= 0) { wake_up(&mcd_waitq); return; } SET_TIMER(mcdStatTimer, 1); } /* * Wait for a status to be returned from the drive. The actual test * (see routine above) is done by the timer interrupt to avoid * excessive rescheduling. */ static int getMcdStatus(int timeout) { int st; McdTimeout = timeout; SET_TIMER(mcdStatTimer, 1); sleep_on(&mcd_waitq); if (McdTimeout <= 0) return -1; st = inb(MCDPORT(0)) & 0xFF; if (st == 0xFF) return -1; if ((st & MST_BUSY) == 0 && audioStatus == CDROM_AUDIO_PLAY) /* XXX might be an error? look at q-channel? */ audioStatus = CDROM_AUDIO_COMPLETED; if (st & MST_DSK_CHG) { mcdDiskChanged = 1; tocUpToDate = 0; audioStatus = CDROM_AUDIO_NO_STATUS; } return st; } /* gives current state of the drive This function is quite unreliable, and should probably be rewritten by someone, eventually... */ int mcd_drive_status(struct cdrom_device_info * cdi, int slot_nr) { int st; st = statusCmd(); /* check drive status */ if (st == -1) return -EIO; /* drive doesn't respond */ if ((st & MST_READY)) return CDS_DISC_OK; if ((st & MST_DOOR_OPEN)) return CDS_TRAY_OPEN; if ((st & MST_DSK_CHG)) return CDS_NO_DISC; if ((st & MST_BUSY)) return CDS_DRIVE_NOT_READY; return -EIO; } /* * Read a value from the drive. */ static int getValue(unsigned char *result) { int count; int s; for (count = 0; count < 2000; count++) if (!(inb(MCDPORT(1)) & MFL_STATUS)) break; if (count >= 2000) { printk("mcd: getValue timeout\n"); return -1; } s = inb(MCDPORT(0)) & 0xFF; *result = (unsigned char) s; return 0; } /* * Read the current Q-channel info. Also used for reading the * table of contents. */ int GetQChannelInfo(struct mcd_Toc *qp) { unsigned char notUsed; int retry; for (retry = 0; retry < MCD_RETRY_ATTEMPTS; retry++) { outb(MCMD_GET_Q_CHANNEL, MCDPORT(0)); if (getMcdStatus(MCD_STATUS_DELAY) != -1) break; } if (retry >= MCD_RETRY_ATTEMPTS) return -1; if (getValue(&qp -> ctrl_addr) < 0) return -1; if (getValue(&qp -> track) < 0) return -1; if (getValue(&qp -> pointIndex) < 0) return -1; if (getValue(&qp -> trackTime.min) < 0) return -1; if (getValue(&qp -> trackTime.sec) < 0) return -1; if (getValue(&qp -> trackTime.frame) < 0) return -1; if (getValue(¬Used) < 0) return -1; if (getValue(&qp -> diskTime.min) < 0) return -1; if (getValue(&qp -> diskTime.sec) < 0) return -1; if (getValue(&qp -> diskTime.frame) < 0) return -1; return 0; } /* * Read the table of contents (TOC) and TOC header if necessary */ static int updateToc() { if (tocUpToDate) return 0; if (GetDiskInfo() < 0) return -EIO; if (GetToc() < 0) return -EIO; tocUpToDate = 1; return 0; } /* * Read the table of contents header */ static int GetDiskInfo() { int retry; for (retry = 0; retry < MCD_RETRY_ATTEMPTS; retry++) { outb(MCMD_GET_DISK_INFO, MCDPORT(0)); if (getMcdStatus(MCD_STATUS_DELAY) != -1) break; } if (retry >= MCD_RETRY_ATTEMPTS) return -1; if (getValue(&DiskInfo.first) < 0) return -1; if (getValue(&DiskInfo.last) < 0) return -1; DiskInfo.first = bcd2bin(DiskInfo.first); DiskInfo.last = bcd2bin(DiskInfo.last); #ifdef MCD_DEBUG printk("Disk Info: first %d last %d length %02x:%02x.%02x first %02x:%02x.%02x\n", DiskInfo.first, DiskInfo.last, DiskInfo.diskLength.min, DiskInfo.diskLength.sec, DiskInfo.diskLength.frame, DiskInfo.firstTrack.min, DiskInfo.firstTrack.sec, DiskInfo.firstTrack.frame); #endif if (getValue(&DiskInfo.diskLength.min) < 0) return -1; if (getValue(&DiskInfo.diskLength.sec) < 0) return -1; if (getValue(&DiskInfo.diskLength.frame) < 0) return -1; if (getValue(&DiskInfo.firstTrack.min) < 0) return -1; if (getValue(&DiskInfo.firstTrack.sec) < 0) return -1; if (getValue(&DiskInfo.firstTrack.frame) < 0) return -1; return 0; } /* * Read the table of contents (TOC) */ static int GetToc() { int i, px; int limit; int retry; struct mcd_Toc qInfo; for (i = 0; i < MAX_TRACKS; i++) Toc[i].pointIndex = 0; i = DiskInfo.last + 3; for (retry = 0; retry < MCD_RETRY_ATTEMPTS; retry++) { outb(MCMD_STOP, MCDPORT(0)); if (getMcdStatus(MCD_STATUS_DELAY) != -1) break; } if (retry >= MCD_RETRY_ATTEMPTS) return -1; for (retry = 0; retry < MCD_RETRY_ATTEMPTS; retry++) { outb(MCMD_SET_MODE, MCDPORT(0)); outb(0x05, MCDPORT(0)); /* mode: toc */ mcd_mode = 0x05; if (getMcdStatus(MCD_STATUS_DELAY) != -1) break; } if (retry >= MCD_RETRY_ATTEMPTS) return -1; for (limit = 300; limit > 0; limit--) { if (GetQChannelInfo(&qInfo) < 0) break; px = bcd2bin(qInfo.pointIndex); if (px > 0 && px < MAX_TRACKS && qInfo.track == 0) if (Toc[px].pointIndex == 0) { Toc[px] = qInfo; i--; } if (i <= 0) break; } Toc[DiskInfo.last + 1].diskTime = DiskInfo.diskLength; for (retry = 0; retry < MCD_RETRY_ATTEMPTS; retry++) { outb(MCMD_SET_MODE, MCDPORT(0)); outb(0x01, MCDPORT(0)); mcd_mode = 1; if (getMcdStatus(MCD_STATUS_DELAY) != -1) break; } #ifdef MCD_DEBUG for (i = 1; i <= DiskInfo.last; i++) printk("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X %02X:%02X.%02X\n", i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex, Toc[i].trackTime.min, Toc[i].trackTime.sec, Toc[i].trackTime.frame, Toc[i].diskTime.min, Toc[i].diskTime.sec, Toc[i].diskTime.frame); for (i = 100; i < 103; i++) printk("i = %2d ctl-adr = %02X track %2d px %02X %02X:%02X.%02X %02X:%02X.%02X\n", i, Toc[i].ctrl_addr, Toc[i].track, Toc[i].pointIndex, Toc[i].trackTime.min, Toc[i].trackTime.sec, Toc[i].trackTime.frame, Toc[i].diskTime.min, Toc[i].diskTime.sec, Toc[i].diskTime.frame); #endif return limit > 0 ? 0 : -1; } #ifdef MODULE int init_module(void) { return mcd_init(); } void cleanup_module(void) { cleanup(3); } #endif MODULE