function print(arg1,arg2,arg3,arg4,arg5)
%PRINT  Print graph or save graph to file.
%       PRINT <filename> saves the current Figure window as PostScript
%       or a printer specific format, as specified by PRINTOPT. If
%       a filename is specified, the output is written to the designated file,
%       overwriting it if it already exists. If the specified filename does not
%       include an extension, an appropriate one is appended.
%       If the filename is omitted, the Figure is sent directly to the
%       printer as specified in PRINTOPT.
%
%       PRINT <filename> -f<figure handle> prints the specified figure.
%       PRINT <filename> -s<system name> prints the specified SIMULINK
%       	system.
%
%       Syntax: PRINT [ -ddevice] [ -options ] <filename>
%
%       Available PostScript devices are:
%          -dps    - PostScript for black and white printers
%          -dpsc   - PostScript for color printers
%          -dps2   - Level 2 PostScript for black and white printers
%          -dpsc2  - Level 2 PostScript for color printers
%
%          -deps   - Encapsulated PostScript (EPSF)
%          -depsc  - Encapsulated Color PostScript (EPSF)
%          -deps2  - Encapsulated Level 2 PostScript (EPSF)
%          -depsc2 - Encapsulated Level 2 Color PostScript (EPSF)
%
%       Additional built-in devices are:
%          -dhpgl  - HPGL compatible with Hewlett-Packard 7475A plotter
%          -dill   - Adobe Illustrator 88 compatible illustration file
%          -dmfile - M-file that will mostly re-create Figure and its children
%                    Not fully functional, and is offered as-is without support
%
%       Additional GhostScript devices are (these devices are not supported
%       on the Macintosh):
%          -dlaserjet - HP LaserJet
%          -dljetplus - HP LaserJet+
%          -dljet2p   - HP LaserJet IIP
%          -dljet3    - HP LaserJet III
%          -dcdeskjet - HP DeskJet 500C with 1 bit/pixel color
%          -dcdjcolor - HP DeskJet 500C with 24 bit/pixel color and
%                           high-quality color (Floyd-Steinberg) dithering
%          -dcdjmono  - HP DeskJet 500C printing black only
%          -ddeskjet  - HP DeskJet and DeskJet Plus
%          -dpaintjet - HP PaintJet color printer
%          -dpjetxl   - HP PaintJet XL color printer
%          -dbj10e    - Canon BubbleJet BJ10e
%          -dln03     - DEC LN03 printer
%          -depson    - Epson-compatible dot matrix printers (9- or 24-pin)
%          -deps9high - Epson-compatible 9-pin, interleaved lines 
%                          (triple resolution)
%          -dgif8     - 8-bit color GIF file format
%          -dpcx16    - Older color PCX file format (EGA/VGA, 16-color)
%          -dpcx256   - Newer color PCX file format (256-color)
%
%       Other options are:
%          -append    - Append, not overwrite, the graph to PostScript file
%          -epsi      - Add 1-bit deep bitmap preview (EPSI format)
%          -ocmyk     - Use CMYK colors in PostScript instead of RGB
%          -Pprinter  - Specify the printer to use
%          -fhandle   - Handle Graphics handle of figure to print
%          -sname     - Name of SIMULINK system window to print
%          -psdefcset - Use PostScript default character set encoding always
%
%       Available Windows device options are:
%          -dwin    - Send figure to currently installed printer in monochrome
%          -dwinc   - Send figure to currently installed printer in color
%          -dmeta   - Send figure to clipboard in Metafile format
%          -dbitmap - Send figure to clipboard in bitmap format
%          -dcdj550 - HP Deskjet 550c
%          -dsetup  - Bring up Print Setup dialog box, but do not print
%
%       Other Windows options are:
%          -v       - Verbose mode, bring up the Print dialog box
%                     which is normally suppressed.
%
%       See also PRINTOPT, ORIENT.

%       Modified 23-Nov-93
%	Copyright (c) 1984-94 by The MathWorks, Inc.

%
% ---------------------------------------------- User modifiable values.

%maximum for width or height of preview window, in Points (72/inch).
maxPrevSize = 200; 

% ---------------------------------------------- End user modifiable values.
%

%
% List of all supported devices used for input validation.
%
% The first column contains the device name, the second column contains the
% default filename extension, the third column indicates what type of output
% device is employed, and the fourth indicates Monochrome or Color device.
%
device_table = [
%Postscript device options
	'ps      '      'ps '   'PS'	'M' 
	'psc     '      'ps '   'PS'	'C'
	'ps2     '      'ps '   'PS'	'M'
	'ps2c    '      'ps '   'PS'	'C'
	'psc2    '      'ps '   'PS'	'C'
	'eps     '      'eps'   'EP'	'M'
	'epsc    '      'eps'   'EP'	'C'
	'eps2    '      'eps'   'EP'	'M'
	'eps2c   '      'eps'   'EP'	'C'
	'epsc2   '      'eps'   'EP'	'C'
%Other built-in device options
	'hpgl    '      'hgl'   'BI'	'C'
    'ill     '      'ai '   'BI'    'C'
    'mfile   '      '   '   'BI'    'C'
%GhostScript device options
	'laserjet'      'jet'   'GS'	'M'
	'ljetplus'      'jet'   'GS'	'M'
	'ljet2p  '      'jet'   'GS'	'M'
	'ljet3   '      'jet'   'GS'	'M'
	'cdeskjet'      'jet'   'GS'	'C'
	'cdjcolor'      'jet'   'GS'	'C'
	'cdjmono '      'jet'   'GS'	'M'
	'deskjet '      'jet'   'GS'	'M'
	'cdj550  '      'jet'   'GS'	'C'
	'paintjet'      'jet'   'GS'	'C'
	'pjetxl  '      'jet'   'GS'	'C'
	'bj10e   '      'jet'   'GS'	'M'
	'ln03    '      'ln3'   'GS'	'M'
	'epson   '      'ep '   'GS'	'M'
	'eps9high'      'ep '   'GS'	'M'
	'epsonc  '      'ep '   'GS'	'C'
	'gif8    '      'gif'   'GS'	'C'
	'pcx16   '      'pcx'   'GS'	'C'
	'pcx256  '      'pcx'   'GS'	'C'
% Microsoft Windows-specific options
	'win     '      '   '   'MW'	'M'
	'winc    '      '   '   'MW'	'C'
	'meta    '      'wmf'   'MW'	'C'
	'bitmap  '      'bmp'   'MW'	'C'
	'setup   '      '   '   'MW'	'M'
];

options = [
	'v        '
	'epsi     '
	'append   '
	'psdefcset'
];

devices = device_table(:, 1:8);
extensions = device_table(:, 9:11);
classes = device_table(:, 12:13);
colorDevs = device_table(:, 14 );

comp = computer;
ghostScriptDevice = [];
printplot = 0;
num_opt_args = 0;
filename = [];
printer = [];
hasPreview = 0;
prtSim = 0;
verbose = 0;
dev = [];

% Get current figure, but don't create one, like gcf would, if none yet.
window = get( 0, 'Children' );
if ~isempty( window )
	window = window(1);
end

for i=1:nargin
	cur_arg = eval(['arg', num2str(i)]);

	% Filename
	if (cur_arg(1) ~= '-')
		if ~isstr( cur_arg )
			error( 'Filename argument is not a string.' )
		end
		if isempty(filename)
			filename = cur_arg;
		else
			error( [ 'Multiple inputs that look like filenames: ''' ...
					filename ''' and ''' cur_arg '''' ] );
		end

	% Device name
	elseif (cur_arg(2) == 'd')
		%
		% verify device given is supported, and only one given
		% device proper starts after '-d', if only '-d'
		% we echo out possible choices
		%
		if ~isempty( dev )
			error( [ 'Multiple inputs that look like device names: ''' ...
					dev ''' and ''' cur_arg ''''] );
		end

		wasError = 0;
		if ( size(cur_arg, 2) > 2 )
			wasError = 1;
			% Find index of device in table, used a lot later on.
			for devIndex = 1:size(devices,1)
				if strcmp( cur_arg(3:size(cur_arg,2)), ...
							deblank(devices(devIndex,:)) )
					dev = deblank( cur_arg );
					break;
				end
			end
			if isempty(dev)
				disp('Illegal device specified.');
			end
		end
		if isempty(dev)
			disp('Supported devices are:')
			if (comp(1:2) =='PC')
				disp(devices);
			else
				% Find first non PC specific device
				for i = size( classes, 1 ) : -1 : 1
					if ~strcmp( classes(i,:), 'MW' )
						break;
					end
				end
				disp( devices( 1 : i, : ) )
			end
			if wasError
				error(' ');
			else
				return;
			end
		end

	% Printer name
	elseif (cur_arg(2) == 'P')
%
%   Athena Mod.  Athena SGI machines use LPR
%	  
%	  if strcmp(comp,'SGI') | strcmp(comp,'HP700')
  	  if  strcmp(comp,'HP700')
			cmdOption = '-d';
		elseif isvms
			cmdOption = '/QUEUE=';
		else
			cmdOption = '-P';
		end
		printer = [ ' ' cmdOption cur_arg(3:length(cur_arg)) ];
	
	% SIMULINK system name
	elseif (cur_arg(2) == 's')
		if ( exist('open_system') ~= 5 )
			error('SIMULINK is not available in this version of MATLAB.');
		end
		window = cur_arg( 3:length(cur_arg) );
		if isempty( window )
			% Print current system by default, if one is open.
			% Put inside eval so Windows and MAC MATLAB only can use this too.
			window = eval('get_param');
			slashIndices = find( '/' == window );
			if ~isempty( slashIndices )
				% Need just the window name, not the lineage of the composite block.
				window = window( slashIndices( length(slashIndices) )+1 : length( window ) );
			end
			
			if isempty( window )
				error('No SIMULINK system to print with -s option.');
			end
		end
		prtSim = 1;

	% Handle Graphics figure handle
	elseif (cur_arg(2) == 'f')
		window = cur_arg( 3:length(cur_arg) );
		if isempty( window )
			% Get current figure, but don't create one, like gcf would, if none yet.
			window = get( 0, 'Children' );
			if ~isempty( window )
				window = window(1);
			end
		else
			%Must be, or at least should be, a figure handle integer.
			window = eval( window );
		end

    % Driver specific options, just pass through.
	elseif (cur_arg(2) == 'o')
		num_opt_args = num_opt_args + 1;
		eval(['opt_arg', num2str(num_opt_args), ' = cur_arg;']);

	% Other options
	else
		%
		% verify any given options are supported
		%
		match = 0;
		if size(cur_arg,2) > 1
			op = cur_arg(2:size(cur_arg,2));
			for r = 1:size(options,1)
				c = min(size(op,2), size(options(r,:),2));
				if strcmp(op(1:c), options(r,1:c))
					match = 1;
					if ( strcmp( op, 'epsi' ) )
						hasPreview = 1;
						%
						% HARDCOPY code actually wants to see 'preview'.
						%
						cur_arg = '-preview';

						if ~( strcmp( comp, 'PCWIN' )  ... 
							| strcmp( comp, 'MAC2' )   ...
							| strcmp( comp, 'MACFPU' ) ...
							| strcmp( comp, 'MAC' ) )
							%
							% Can't have EPSI preview if using a terminal
							% because we can't do screen capture.
							%
							if ~strcmp( get(0,'TerminalProtocol'), 'x' )
								disp('WARNING: Can not capture screen preview in terminal mode; epsi option ignored.')
								match = 2;
								hasPreview = 0;
							end
						end
					elseif (strcmp(op, 'v'))
						verbose = 1;
					end
					break;
				end
			end
		end
		if match == 0
			error(['Illegal option ''' op ''' given.'])
		elseif match == 1
			num_opt_args = num_opt_args + 1;
			eval(['opt_arg', num2str(num_opt_args), ' = cur_arg;']);
		end
	end
end

% If no window requested, and none to act as default, error out.
if isempty( window )
	error('No Figure to print.');
end

% If no device given, use default from PRINTOPT
if isempty( dev )

	% Find device name in list of devices to set the
	% appropriate filename extension.
	[lprcmd, defaultDevice] = printopt;
	% skip '-d'
	d = defaultDevice( 3 : size(defaultDevice,2) );
	for devIndex = 1 : size(devices,1)
		if strcmp( devices(devIndex, 1 : size(d,2)), d )
			dev = defaultDevice;
	   		break;
		end

	end
	if isempty( dev )
		error(['PRINTOPT specifies an unknown device type '''...
			defaultDevice ''''])
	end
end

devClass = classes(devIndex, :);
if ( devClass == 'GS' )
	if (comp(1:3) =='MAC')
		error('GhostScript devices are not supported on the Macintosh.')
	end
	%
	% Remember actual device, get MATLAB to produce PostScript for later
	% conversion by GhostScript
	%
	ghostScriptDevice = deblank(devices(devIndex,:));
	if ( colorDevs(devIndex ) == 'C' )
		dev = '-dpsc';
	else
		dev = '-dps';
	end
elseif strcmp(devClass, 'MW' )
	if ~strcmp( comp, 'PCWIN' )
		error( ['Can only use Windows device ''' dev ''' on a Windows machine.'])
	end
end

extension = deblank(extensions( devIndex, : ));

if ~prtSim
	% Create Handle Graphics objects on screen if not already there;
	% but, if going to change colors and bring it to front
	% for EPSI preview, do not drawnow now, but after color changes.
	if ~( hasPreview & ...
		(strcmp( 'on', get(window,'InvertHardcopy') ) ...
		| colorDevs( devIndex ) == 'M' ) )
	        drawnow
	end
end

tellUserFilename = 0;
if isempty(filename)
	%EPS files shouldn't go to printer, generate file on disk
	if ( devClass == 'EP' )
		if prtSim
			filename = window;
		else
			filename = [ 'figure' int2str( window ) ];
		end
		tellUserFilename = 1;
	else
		% Generate a unique name for temporary file
		if (devClass ~= 'MW')
			filename = tempname;
			printplot = 1;
		end
	end
else
	% Hack, if user specifies a filename while device is -dwin
	% or -dwinc, either because the user gave that device or, more
	% likely, it's the default, and since the filename is useless
	% with Windows driver anyway, we'll assume the user really wants
	% a PostScript file. This is because 'print foo' is easier
	% to type then 'print -dps foo' and probably more commonly
	% meant if a filename is given.
	if (devClass == 'MW') & (strcmp( dev, '-dwin' ) | strcmp( dev, '-dwinc' ))
		if ( colorDevs(devIndex ) == 'C' )
			dev = '-dpsc';
		else
			dev = '-dps';
		end
		extension = 'ps';
	end
end

% Append appropriate extension to filename if it doesn't have
% one, and we've determined a good one.
if ~any(filename == '.') & ~isempty( extension ) & ~isempty( filename )
	filename = [ filename '.' extension ];
end

if tellUserFilename
	disp( 'Encapsulated PostScript files can not be sent to printer.' );
	disp( [ 'File saved to disk under name ''' filename '''.' ] );
end

if (strcmp('setup', dev(3:size(dev,2))))
	if isempty( filename )
		filename = 'Untitled';
	end
    hardcopy( window , filename, dev)
    return
end

if (comp(1:3) =='MAC')
	if (printplot & verbose)
		printplot = macprint(window, filename, prtSim, 0);
		if ~printplot
			return;
		end
	end

	if ((devClass == 'EP' | devClass == 'PS') & ~printplot & ~hasPreview)
		cur_arg = '-previewmac';
		num_opt_args = num_opt_args + 1;
		eval(['opt_arg', num2str(num_opt_args), ' = cur_arg;']);
	end
end

if ~( prtSim | strcmp( '-dmfile', dev ) )
	% Invert B&W color properties of Figure and child objects
	if strcmp( 'on', get(window,'InvertHardcopy') )
		invertedColor = 1;
		cinvert( window );
	else
		invertedColor = 0;
	end

	% if not color, set lines and text to a color contrasting background
    if ( colorDevs(devIndex ) == 'M' )
		lineTextColors = blt( window, get(window,'color') );
	else
		lineTextColors = [];
	end

	% If including preview, and changed any of the colors, update figure
	% raise it to top of stacking order for screen capture.
	% Resize the figure if its larger then the biggest preview allowed
	% in the aspect ratio of the PaperPosition the graph is rendered into.
	if hasPreview
		%
		% Get current size info in points.
		%
		origUnits = get( window, 'units' );
		set( window, 'units', 'Points' );
		frect = get( window, 'position');

		origPaperUnits = get( window, 'paperunits' );
		set( window, 'paperunits', 'Points' );
		prect = get( window, 'paperposition');
		pW = prect(3);
		pH = prect(4);

		if max(pH, pW) > maxPrevSize 
			%
			% One dimension may need to shrink more then the other.
			%
			prevResized = 1;
			scale = min( maxPrevSize ./ [pW pH] );
			newWH = fix( [pW pH] .* scale );
			%
			% Shrink window for screen capture, keep top left position.
			%
			set( window, 'Position', [ frect(1) frect(2)+(frect(4)-newWH(2)) newWH ] )
		else
			prevResized = 0;
		end

		% Bring figure to front
		figure( window );

		% Render Handle Graphics objects in new state for EPSI preview.
		drawnow

	end % hasPreview
end     % ~prtSim

if ( devClass == 'GS' )
	orig_filename1 = filename;
	filename = [tempname '.ps'];
end

if isempty(filename)
	filename = '';
end

if (num_opt_args == 0)
	hardcopy( window, filename, dev)
elseif (num_opt_args == 1)
	hardcopy( window, filename, dev, opt_arg1)
elseif (num_opt_args == 2)
	hardcopy( window, filename, dev, opt_arg1, opt_arg2)
elseif (num_opt_args == 3)
	hardcopy( window, filename, dev, opt_arg1, opt_arg2, opt_arg3)
elseif (num_opt_args == 4)
	hardcopy( window, filename, dev, opt_arg1, opt_arg2, opt_arg3, opt_arg4)
elseif (num_opt_args == 5)
	hardcopy( window, filename, dev, opt_arg1, opt_arg2, opt_arg3, opt_arg4, opt_arg5)
end


if ~prtSim
	% set color of lines and text back to what they were
	if ~isempty( lineTextColors )
		blt( window, get(window,'color'), lineTextColors);
	end

	% Invert back the W&B color properties of Figure and child objects
	if invertedColor
		cinvert( window );
	end

	% Reconstruct figure the way it was.
	if hasPreview 

		% Reconstruct figure the way it was.
		if prevResized
			set( window, 'Position', frect )
		end
		set( window, 'units', origUnits );
		set( window, 'paperunits', origPaperUnits );

		if prevResized | invertedColor | ~isempty(lineTextColors)
			drawnow;
		end

	elseif ((invertedColor | ~isempty( lineTextColors )) & ~strcmp(dev, '-dbitmap'))
		%
		% Discard all the object invalidations that occured as a result of
		% changing colors. All objects are back to their previous state,
		% but they don't know that.
		%
		drawnow('discard')
	end % hasPreview

end % ~prtSim

if ( devClass == 'GS' )

	rsp_file = [tempname '.rsp'];
	rsp_fid = fopen (rsp_file, 'w');
	if (rsp_fid < 0)
		error('Unable to create response file')
	end

	
	if (comp(1:2) =='PC')
		ghostDir = 'ghostscr';	
	else
		ghostDir = 'ghostscript';
	end

	fprintf(rsp_fid, '-dNOPAUSE -q \n');
	fprintf(rsp_fid, ['-I%s/' ghostDir '/ps_files\n'], matlabroot);
	fprintf(rsp_fid, ['-I%s/' ghostDir '/fonts\n'], matlabroot);
	fprintf(rsp_fid, '-sDEVICE=%s\n', ghostScriptDevice);

	if ~prtSim
		if ~strcmp( get(window,'papertype'), 'usletter' )
			if strcmp( get(window,'papertype'), 'uslegal' )
				fprintf(rsp_fid, '-sPAPERSIZE=legal\n');
			elseif strcmp( get(window,'papertype'), 'a4letter' )
				fprintf(rsp_fid, '-sPAPERSIZE=a4\n' );
			elseif strcmp( get(window,'papertype'), 'tabloid' )
				fprintf(rsp_fid, '-sPAPERSIZE=11x17\n' );
			else
				% PaperType is same as names ghostscript uses
				fprintf(rsp_fid, '-sPAPERSIZE=%s\n', get(window,'papertype') );
			end
		end
	end

	if (comp(1:2) =='PC')
		orig_dir = pwd;
		if (orig_filename1(2) == ':') | (orig_filename1(1)=='\')
			fprintf(rsp_fid, '-sOutputFile=%s\n', orig_filename1 );
		else
			fprintf(rsp_fid, '-sOutputFile=%s\n', [orig_dir '\' orig_filename1] );
		end
		fclose(rsp_fid);
		cd( [ matlabroot '\' ghostDir '\bin' ]);
		dos( [ 'gs386 @' rsp_file ' ' filename '<NUL |' ] );
		cd (orig_dir);
	else    
		fprintf(rsp_fid, '-sOutputFile=%s\n', orig_filename1 );
		fclose(rsp_fid);
		if (getenv('ARCH')=='sgi')
			status = unix( [ matlabroot '/' ghostDir '/' ...
				 getenv('ARCH') '/gs @' rsp_file ' '...
				 filename ' < /dev/null > /dev/null' ] );
		else
			status = unix( [ matlabroot '/' ghostDir '/bin/' ...
				 getenv('ARCH') '/gs @' rsp_file ' '...
				 filename ' < /dev/null > /dev/null' ] );
		end
		if (status)
			error('GhostScript returned nonzero error status')
		end
	end

	delete(rsp_file)
	delete(filename)
	filename = orig_filename1;

elseif strcmp( '-dhpgl', dev )

	%Add Xon/Xoff handshaking parameters to HPGL files.
	% If these settings are not appropriate for you hardware,
	% modify it -- the first line of the HPGL file is 80 blanks
	% to make this easier.
	% To make no such modifications, replace the elseif above with
	% elseif 0

	%Open the HPGL file we just wrote out.
	[ fid, msg ] = fopen( filename, 'r+' );
	if ( fid == -1 )
		error( ['Could not open HPGL file: ''' msg ''''] );
	end

	%The Escape code is ASCII 27
	esc = setstr( 27 );

	%Plotter initialization:
	% Plotter On Instruction == ESC.Y;
	% Set Handshake Mode 2 Instruction == ESC.I<options>;
	%	3 optional arguments <blocksize>;<enquiry>;<acknowledgment>
	%               blocksize == 200 bytes
	%       enquiry character == defaults to NULL
	%   acknowledgment string == ASCII character 17
	% Set Extended Output and Handshake Mode Instruction == ESC.N<options>;
	%   3 optional arguments <delay>;<trigger>
	%     intercharacter delay == 50 milliseconds
	%   Xoff trigger character == ASCII 19
	% For more information, see your plotter manual or local hardware guru.
	fprintf( fid, [esc '.Y;' esc '.I200;;17:' esc '.N50;19:;'] );

	err = fseek( fid, 0, 'eof' );
	if ( err == -1 )
		error('Could not seek to EOF of HPGL file');
	end

	%Plotter off
	% Can't turn off power, just puts plotter in passive state
	fprintf( fid, [esc '.Z\n'] );

	fclose( fid );
end

if (printplot)
	lprcmd = printopt;

	%If user specified a printer, add it to the printing command
	if ~isempty( printer )
		lprcmd = [ lprcmd printer ];
	end

	if (comp(1:2) == 'PC')
		cmd = sprintf(lprcmd, filename);
		dos(cmd);
		delete(filename);
	elseif (comp(1:3) =='MAC')
		macprint(window, filename, prtSim,1);
	else
		unix([lprcmd ' ' filename]);
	end
end