NAME
       exec - Invoke subprocess(es)

SYNOPSIS
       exec ?switches? arg ?arg ...?


DESCRIPTION
       This  command  treats its arguments as the specification of one or more
       subprocesses to execute.  The arguments take the  form  of  a  standard
       shell  pipeline  where each arg becomes one word of a command, and each
       distinct command becomes a subprocess.

       If the initial arguments to exec start with - then they are treated  as
       command-line  switches  and are not part of the pipeline specification.
       The following switches are currently supported:

       -keepnewline Retains a trailing newline in the pipeline's output.  Nor-
                    mally a trailing newline will be deleted.

       --           Marks  the  end  of switches.  The argument following this
                    one will be treated as the first arg  even  if  it  starts
                    with a -.

       If  an arg (or pair of arg's) has one of the forms described below then
       it is used by exec to control the flow of input and  output  among  the
       subprocess(es).   Such  arguments  will  not  be  passed to the subpro-
       cess(es).  In forms such as ``< fileName'' fileName may either be in  a
       separate  argument from ``<'' or in the same argument with no interven-
       ing space (i.e. ``<fileName'').

       |              Separates distinct commands in the pipeline.  The  stan-
                      dard  output of the preceding command will be piped into
                      the standard input of the next command.

       |&             Separates distinct commands in the pipeline.  Both stan-
                      dard  output and standard error of the preceding command
                      will be piped into the standard input of the  next  com-
                      mand.   This form of redirection overrides forms such as
                      2> and >&.

       < fileName     The file named by fileName is opened  and  used  as  the
                      standard input for the first command in the pipeline.

       <@ fileId      FileId  must be the identifier for an open file, such as
                      the return value from a previous call to  open.   It  is
                      used  as the standard input for the first command in the
                      pipeline.  FileId must have been opened for reading.

       << value       Value is passed to the first  command  as  its  standard
                      input.

       > fileName     Standard  output  from the last command is redirected to
                      the file named fileName, overwriting its  previous  con-
                      tents.

       2> fileName    Standard  error  from  all  commands  in the pipeline is
                      redirected to the file named fileName,  overwriting  its
                      previous contents.

       >& fileName    Both  standard output from the last command and standard
                      error from all commands are redirected to the file named
                      fileName, overwriting its previous contents.

       >> fileName    Standard  output  from the last command is redirected to
                      the file named fileName, appending  to  it  rather  than
                      overwriting it.

       2>> fileName   Standard  error  from  all  commands  in the pipeline is
                      redirected to the file named fileName, appending  to  it
                      rather than overwriting it.

       >>& fileName   Both  standard output from the last command and standard
                      error from all commands are redirected to the file named
                      fileName, appending to it rather than overwriting it.

       >@ fileId      FileId  must be the identifier for an open file, such as
                      the return value from a previous call to open.  Standard
                      output  from  the last command is redirected to fileId's
                      file, which must have been opened for writing.

       2>@ fileId     FileId must be the identifier for an open file, such  as
                      the return value from a previous call to open.  Standard
                      error from all commands in the pipeline is redirected to
                      fileId's file.  The file must have been opened for writ-
                      ing.

       >&@ fileId     FileId must be the identifier for an open file, such  as
                      the  return  value  from  a previous call to open.  Both
                      standard output from the last command and standard error
                      from  all commands are redirected to fileId's file.  The
                      file must have been opened for writing.

       If standard output has  not  been  redirected  then  the  exec  command
       returns  the standard output from the last command in the pipeline.  If
       any of the commands in the pipeline exit abnormally or  are  killed  or
       suspended,  then  exec  will return an error and the error message will
       include the pipeline's output followed by error messages describing the
       abnormal  terminations;  the errorCode variable will contain additional
       information about the last abnormal termination encountered.  If any of
       the  commands writes to its standard error file and that standard error
       isn't redirected, then exec will return an error;   the  error  message
       will include the pipeline's standard output, followed by messages about
       abnormal terminations (if any), followed by the standard error  output.

       If  the last character of the result or error message is a newline then
       that character is normally deleted from the result  or  error  message.
       This  is  consistent with other Tcl return values, which don't normally
       end with newlines.  However, if  -keepnewline  is  specified  then  the
       trailing newline is retained.

       If  standard input isn't redirected with ``<'' or ``<<'' or ``<@'' then
       the standard input for the first command in the pipeline is taken  from
       the application's current standard input.

       If  the  last  arg is ``&'' then the pipeline will be executed in back-
       ground.  In this case the exec command will return a  list  whose  ele-
       ments  are  the  process identifiers for all of the subprocesses in the
       pipeline.  The standard output from the last command  in  the  pipeline
       will  go  to  the application's standard output if it hasn't been redi-
       rected, and error output from all of the commands in the pipeline  will
       go to the application's standard error file unless redirected.

       The first word in each command is taken as the command name; tilde-sub-
       stitution is performed on it, and if the  result  contains  no  slashes
       then  the directories in the PATH environment variable are searched for
       an executable by the given name.  If the name contains a slash then  it
       must  refer  to an executable reachable from the current directory.  No
       ``glob'' expansion or other shell-like substitutions are  performed  on
       the arguments to commands.


PORTABILITY ISSUES
       Windows (all versions)
              Reading  from  or  writing  to  a socket, using the ``@ fileId''
              notation, does not work.  When reading from a socket,  a  16-bit
              DOS  application  will hang and a 32-bit application will return
              immediately with end-of-file.  When either type  of  application
              writes  to a socket, the information is instead sent to the con-
              sole, if one is present, or is discarded.

              The Tk console text widget does not  provide  real  standard  IO
              capabilities.   Under  Tk, when redirecting from standard input,
              all applications will see an immediate end-of-file;  information
              redirected  to  standard  output  or standard error will be dis-
              carded.

              Either forward or backward slashes are accepted as path  separa-
              tors  for arguments to Tcl commands.  When executing an applica-
              tion, the path name specified for the application may also  con-
              tain  forward  or  backward slashes as path separators.  Bear in
              mind, however, that most Windows applications  accept  arguments
              with  forward  slashes only as option delimiters and backslashes
              only in paths.  Any arguments to an application that  specify  a
              path  name  with  forward slashes will not automatically be con-
              verted to use the backslash character.  If an argument  contains
              forward slashes as the path separator, it may or may not be rec-
              ognized as a path name, depending on the program.

              Additionally, when calling a 16-bit DOS or Windows 3.X  applica-
              tion,  all  path  names must use the short, cryptic, path format
              (e.g.,   using   ``applba~1.def''    instead    of    ``applbak-
              ery.default'').

              Two or more forward or backward slashes in a row in a path refer
              to a network path.  For example, a simple concatenation  of  the
              root  directory  c:/  with  a  subdirectory /windows/system will
              yield c://windows/system (two slashes together), which refers to
              the mount point called system on the machine called windows (and
              the c:/ is ignored), and is not equivalent to c:/windows/system,
              which  describes  a directory on the current computer.  The file
              join command should be used to concatenate path components.

       Windows NT
              When attempting to execute an application, exec  first  searches
              for  the  name as it was specified.  Then, in order, .com, .exe,
              and .bat are appended to the end of the specified  name  and  it
              searches for the longer name.  If a directory name was not spec-
              ified as part of the application name, the following directories
              are  automatically  searched  in order when attempting to locate
              the application:

                     The directory from which the Tcl executable was loaded.
                     The current directory.
                     The Windows NT 32-bit system directory.
                     The Windows NT 16-bit system directory.
                     The Windows NT home directory.
                     The directories listed in the path.

              In order to execute the shell  builtin  commands  like  dir  and
              copy,  the  caller  must  prepend ``cmd.exe /c '' to the desired
              command.


       Windows 95
              When attempting to execute an application, exec  first  searches
              for  the  name as it was specified.  Then, in order, .com, .exe,
              and .bat are appended to the end of the specified  name  and  it
              searches for the longer name.  If a directory name was not spec-
              ified as part of the application name, the following directories
              are  automatically  searched  in order when attempting to locate
              the application:

                     The directory from which the Tcl executable was loaded.
                     The current directory.
                     The Windows 95 system directory.
                     The Windows 95 home directory.
                     The directories listed in the path.

              In order to execute the shell  builtin  commands  like  dir  and
              copy, the caller must prepend ``command.com /c '' to the desired
              command.

              Once a 16-bit DOS application has read  standard  input  from  a
              console  and then quit, all subsequently run 16-bit DOS applica-
              tions will see the standard input  as  already  closed.   32-bit
              applications  do  not  have this problem and will run correctly,
              even after a 16-bit DOS application thinks that  standard  input
              is  closed.   There  is no known workaround for this bug at this
              time.

              Redirection between the NUL: device  and  a  16-bit  application
              does not always work.  When redirecting from NUL:, some applica-
              tions may hang, others will get an infinite stream  of  ``0x01''
              bytes, and some will actually correctly get an immediate end-of-
              file; the behavior seems to depend upon something compiled  into
              the  application itself.  When redirecting greater than 4K or so
              to NUL:, some applications will hang.  The above problems do not
              happen with 32-bit applications.

              All DOS 16-bit applications are run synchronously.  All standard
              input from a pipe to a 16-bit DOS application is collected  into
              a  temporary  file;  the  other  end  of the pipe must be closed
              before the 16-bit DOS application begins executing.   All  stan-
              dard  output or error from a 16-bit DOS application to a pipe is
              collected into temporary files; the application  must  terminate
              before  the  temporary files are redirected to the next stage of
              the pipeline.  This is due to a workaround for a Windows 95  bug
              in  the implementation of pipes, and is how the standard Windows
              95 DOS shell handles pipes itself.

              Certain applications, such as command.com, should  not  be  exe-
              cuted  interactively.   Applications  which  directly access the
              console window, rather than reading from  their  standard  input
              and writing to their standard output may fail, hang Tcl, or even
              hang the system if their  own  private  console  window  is  not
              available to them.

       Macintosh
              The  exec  command  is  not implemented and does not exist under
              Macintosh.

       Unix
              The exec command is fully functional and works as described.


SEE ALSO
       error(n), open(n)


KEYWORDS
