NAME
       text - Create and manipulate text widgets

SYNOPSIS
       text pathName ?options?

STANDARD OPTIONS
       -background           -highlightthickness  -relief
       -borderwidth          -insertbackground    -selectbackground
       -cursor               -insertborderwidth   -selectborderwidth
       -exportselection      -insertofftime       -selectforeground
       -font                 -insertontime        -setgrid
       -foreground           -insertwidth         -takefocus
       -highlightbackground  -padx                -xscrollcommand
       -highlightcolor       -pady                -yscrollcommand

       See the options manual entry for details on the standard options.

WIDGET-SPECIFIC OPTIONS
       Command-Line Name:-height
       Database Name:  height
       Database Class: Height

              Specifies the desired height for the window, in units of charac-
              ters in the font given by the -font option.  Must  be  at  least
              one.

       Command-Line Name:-spacing1
       Database Name:  spacing1
       Database Class: Spacing1

              Requests  additional  space  above each text line in the widget,
              using any of the standard forms for screen distances.  If a line
              wraps,  this  option  only applies to the first line on the dis-
              play.  This option may be overriden with  -spacing1  options  in
              tags.

       Command-Line Name:-spacing2
       Database Name:  spacing2
       Database Class: Spacing2

              For  lines  that  wrap (so that they cover more than one line on
              the display) this option specifies additional space  to  provide
              between  the display lines that represent a single line of text.
              The value may have any of the standard  forms  for  screen  dis-
              tances.   This option may be overriden with -spacing2 options in
              tags.

       Command-Line Name:-spacing3
       Database Name:  spacing3
       Database Class: Spacing3

              Requests additional space below each text line  in  the  widget,
              using any of the standard forms for screen distances.  If a line
              wraps, this option only applies to the last line on the display.
              This option may be overriden with -spacing3 options in tags.

       Command-Line Name:-state
       Database Name:  state
       Database Class: State

              Specifies  one  of two states for the text:  normal or disabled.
              If the text is disabled then characters may not be  inserted  or
              deleted  and  no insertion cursor will be displayed, even if the
              input focus is in the widget.

       Command-Line Name:-tabs
       Database Name:  tabs
       Database Class: Tabs

              Specifies a set of tab stops for the window.  The option's value
              consists  of  a list of screen distances giving the positions of
              the tab stops.  Each position may optionally be followed in  the
              next list element by one of the keywords left, right, center, or
              numeric, which specifies how to justify text relative to the tab
              stop.  Left is the default; it causes the text following the tab
              character to be positioned with its left edge at the  tab  posi-
              tion.  Right means that the right edge of the text following the
              tab character is positioned at  the  tab  position,  and  center
              means  that  the  text is centered at the tab position.  Numeric
              means that the decimal point in the text is  positioned  at  the
              tab  position;  if there is no decimal point then the least sig-
              nificant digit of the number is positioned just to the  left  of
              the  tab  position;   if there is no number in the text then the
              text is right-justified at the tab position.  For example, -tabs
              {2c left 4c 6c center} creates three tab stops at two-centimeter
              intervals;  the first two use left justification and  the  third
              uses  center  justification.   If the list of tab stops does not
              have enough elements to cover all of the tabs in  a  text  line,
              then  Tk extrapolates new tab stops using the spacing and align-
              ment from the last tab stop in the list.  The value of the  tabs
              option  may be overridden by -tabs options in tags.  If no -tabs
              option is specified, or if it is specified  as  an  empty  list,
              then  Tk  uses  default  tabs  spaced every eight (average size)
              characters.

       Command-Line Name:-width
       Database Name:  width
       Database Class: Width

              Specifies the desired width for the window in units  of  charac-
              ters in the font given by the -font option.  If the font doesn't
              have a uniform width then the width of the  character  ``0''  is
              used in translating from character units to screen units.

       Command-Line Name:-wrap
       Database Name:  wrap
       Database Class: Wrap

              Specifies  how  to handle lines in the text that are too long to
              be displayed in a single line of the text's window.   The  value
              must  be  none  or char or word.  A wrap mode of none means that
              each line of text appears as exactly one  line  on  the  screen;
              extra characters that don't fit on the screen are not displayed.
              In the other modes each line of text will be broken up into sev-
              eral  screen lines if necessary to keep all the characters visi-
              ble.  In char mode a screen line break may occur after any char-
              acter;  in  word  mode  a  line  break will only be made at word
              boundaries.


DESCRIPTION
       The text command creates a new window (given by the pathName  argument)
       and  makes it into a text widget.  Additional options, described above,
       may be specified on the command line or in the option database to  con-
       figure  aspects  of  the  text such as its default background color and
       relief.  The text command returns the path name of the new window.

       A text widget displays one or more lines of text and allows  that  text
       to be edited.  Text widgets support four different kinds of annotations
       on the text, called tags, marks, embedded windows or  embedded  images.
       Tags  allow different portions of the text to be displayed with differ-
       ent fonts and colors.  In addition, Tcl commands can be associated with
       tags  so  that  scripts  are  invoked  when  particular actions such as
       keystrokes and mouse button presses occur in particular ranges  of  the
       text.  See TAGS below for more details.

       The  second  form  of  annotation consists of marks, which are floating
       markers in the text.  Marks are used to keep track of various interest-
       ing  positions  in  the text as it is edited.  See MARKS below for more
       details.

       The third form of annotation allows arbitrary windows to be embedded in
       a text widget.  See EMBEDDED WINDOWS below for more details.

       The fourth form of annotation allows Tk images to be embedded in a text
       widget.  See EMBEDDED IMAGES below for more details.


INDICES
       Many of the widget commands for texts take one or more indices as argu-
       ments.  An index is a string used to indicate a particular place within
       a text, such as a place to insert characters or one endpoint of a range
       of characters to delete.  Indices have the syntax
              base modifier modifier modifier ...
       Where  base  gives  a starting point and the modifiers adjust the index
       from the starting point (e.g. move forward or backward one  character).
       Every index must contain a base, but the modifiers are optional.

       The base for an index must have one of the following forms:

       line.char   Indicates  char'th  character on line line.  Lines are num-
                   bered from 1 for consistency with other UNIX programs  that
                   use  this  numbering scheme.  Within a line, characters are
                   numbered from 0.  If char is end then it refers to the new-
                   line character that ends the line.

       @x,y        Indicates the character that covers the pixel whose x and y
                   coordinates within the text's window are x and y.

       end         Indicates the end of the text (the character just after the
                   last newline).

       mark        Indicates  the  character just after the mark whose name is
                   mark.

       tag.first   Indicates the first character in the  text  that  has  been
                   tagged  with tag.  This form generates an error if no char-
                   acters are currently tagged with tag.

       tag.last    Indicates the character just after the last one in the text
                   that  has  been  tagged  with  tag.  This form generates an
                   error if no characters are currently tagged with tag.

       pathName    Indicates the position of the embedded window whose name is
                   pathName.   This  form  generates  an  error if there is no
                   embedded window by the given name.

       imageName   Indicates the position of the embedded image whose name  is
                   imageName.   This  form  generates  an error if there is no
                   embedded image by the given name.

       If the base could match more than one of the above  forms,  such  as  a
       mark and imageName both having the same value, then the form earlier in
       the above list takes precedence.  If modifiers follow the  base  index,
       each  one  of  them  must have one of the forms listed below.  Keywords
       such  as  chars  and  wordend  may  be  abbreviated  as  long  as   the
       abbreviation is unambiguous.

       + count chars
              Adjust  the  index  forward by count characters, moving to later
              lines in the text if necessary.  If there are fewer  than  count
              characters  in  the  text  after the current index, then set the
              index to the last character in the text.  Spaces on either  side
              of count are optional.

       - count chars
              Adjust the index backward by count characters, moving to earlier
              lines in the text if necessary.  If there are fewer  than  count
              characters  in  the  text before the current index, then set the
              index to the first character in the text.  Spaces on either side
              of count are optional.

       + count lines
              Adjust  the  index  forward  by  count lines, retaining the same
              character position within the line.  If  there  are  fewer  than
              count  lines  after  the line containing the current index, then
              set the index to refer to the same  character  position  on  the
              last  line of the text.  Then, if the line is not long enough to
              contain a character at the indicated character position,  adjust
              the  character  position  to  refer to the last character of the
              line  (the  newline).   Spaces  on  either  side  of  count  are
              optional.

       - count lines
              Adjust  the  index  backward  by count lines, retaining the same
              character position within the line.  If  there  are  fewer  than
              count  lines  before the line containing the current index, then
              set the index to refer to the same  character  position  on  the
              first line of the text.  Then, if the line is not long enough to
              contain a character at the indicated character position,  adjust
              the  character  position  to  refer to the last character of the
              line  (the  newline).   Spaces  on  either  side  of  count  are
              optional.

       linestart
              Adjust the index to refer to the first character on the line.

       lineend
              Adjust the index to refer to the last character on the line (the
              newline).

       wordstart
              Adjust the index to refer to the first  character  of  the  word
              containing  the current index.  A word consists of any number of
              adjacent characters that are letters, digits, or underscores, or
              a single character that is not one of these.

       wordend
              Adjust  the  index to refer to the character just after the last
              one of the word containing the current index.   If  the  current
              index  refers  to  the last character of the text then it is not
              modified.

       If more than one modifier is present then they are applied in  left-to-
       right  order.   For  example, the index ``end - 1 chars'' refers to the
       next-to-last character in the text  and  ``insert  wordstart  -  1  c''
       refers  to the character just before the first one in the word contain-
       ing the insertion cursor.


TAGS
       The first form of annotation in text widgets is a tag.  A tag is a tex-
       tual  string  that is associated with some of the characters in a text.
       Tags may contain arbitrary characters, but it is probably best to avoid
       using  the the characters `` '' (space), +, or -: these characters have
       special meaning in indices, so tags containing them can't  be  used  as
       indices.  There may be any number of tags associated with characters in
       a text.  Each tag may refer to a single character, a range  of  charac-
       ters,  or  several  ranges  of characters.  An individual character may
       have any number of tags associated with it.

       A priority order is defined among tags,  and  this  order  is  used  in
       implementing some of the tag-related functions described below.  When a
       tag is defined (by associating it with characters or setting  its  dis-
       play  options or binding commands to it), it is given a priority higher
       than any existing tag.  The priority order of  tags  may  be  redefined
       using the ``pathName tag raise'' and ``pathName tag lower'' widget com-
       mands.

       Tags serve three purposes in text widgets.  First, they control the way
       information  is  displayed  on  the screen.  By default, characters are
       displayed as determined by the background, font, and foreground options
       for  the  text widget.  However, display options may be associated with
       individual tags using the ``pathName tag  configure''  widget  command.
       If  a  character  has  been tagged, then the display options associated
       with the tag override the default display style.  The following options
       are currently supported for tags:

       -background color
              Color specifies the background color to use for characters asso-
              ciated with the tag.  It may have any of the forms  accepted  by
              Tk_GetColor.

       -bgstipple bitmap
              Bitmap  specifies a bitmap that is used as a stipple pattern for
              the background.  It may  have  any  of  the  forms  accepted  by
              Tk_GetBitmap.   If  bitmap  hasn't  been  specified, or if it is
              specified as an empty string, then a solid fill will be used for
              the background.

       -borderwidth pixels
              Pixels  specifies  the  width of a 3-D border to draw around the
              background.  It may have any of the forms accepted by Tk_GetPix-
              els.  This option is used in conjunction with the -relief option
              to give a 3-D appearance to the background for characters; it is
              ignored  unless the -background option has been set for the tag.

       -elide boolean
              Elide specifies whether the data should be elided.  Elided  data
              is  not  displayed  and takes no space on screen, but further on
              behaves just as normal data.

       -fgstipple bitmap
              Bitmap specifies a bitmap that is used as a stipple pattern when
              drawing  text  and  other  foreground information such as under-
              lines.  It may have any of the forms accepted  by  Tk_GetBitmap.
              If  bitmap  hasn't  been  specified, or if it is specified as an
              empty string, then a solid fill will be used.

       -font fontName
              FontName is the name of a font to use  for  drawing  characters.
              It may have any of the forms accepted by Tk_GetFont.

       -foreground color
              Color  specifies  the  color  to use when drawing text and other
              foreground information such as underlines.  It may have  any  of
              the forms accepted by Tk_GetColor.

       -justify justify
              If  the  first  character  of a display line has a tag for which
              this option has been specified, then justify determines  how  to
              justify the line.  It must be one of left, right, or center.  If
              a line wraps, then the justification for each line on  the  dis-
              play  is determined by the first character of that display line.

       -lmargin1 pixels
              If the first character of a text line has a tag for  which  this
              option  has  been  specified, then pixels specifies how much the
              line should be indented from the left edge of the window.   Pix-
              els may have any of the standard forms for screen distances.  If
              a line of text wraps, this option only applies to the first line
              on  the  display;  the -lmargin2 option controls the indentation
              for subsequent lines.

       -lmargin2 pixels
              If the first character of a display line has  a  tag  for  which
              this  option  has been specified, and if the display line is not
              the first for its text line (i.e., the text line  has  wrapped),
              then  pixels specifies how much the line should be indented from
              the left edge of the window.  Pixels may have any of  the  stan-
              dard  forms for screen distances.  This option is only used when
              wrapping is enabled, and it only applies to the second and later
              display lines for a text line.

       -offset pixels
              Pixels  specifies  an amount by which the text's baseline should
              be offset vertically from the baseline of the overall  line,  in
              pixels.   For  example, a positive offset can be used for super-
              scripts and a negative offset can be used for subscripts.   Pix-
              els may have any of the standard forms for screen distances.

       -overstrike boolean
              Specifies  whether  or not to draw a horizontal rule through the
              middle of  characters.   Boolean  may  have  any  of  the  forms
              accepted by Tk_GetBoolean.

       -relief relief
              Relief  specifies the 3-D relief to use for drawing backgrounds,
              in any of the forms accepted by Tk_GetRelief.   This  option  is
              used  in  conjunction with the -borderwidth option to give a 3-D
              appearance to the  background  for  characters;  it  is  ignored
              unless the -background option has been set for the tag.

       -rmargin pixels
              If  the  first  character  of a display line has a tag for which
              this option has been specified, then pixels specifies how wide a
              margin  to  leave between the end of the line and the right edge
              of the window.  Pixels may have any of the  standard  forms  for
              screen  distances.   This  option  is only used when wrapping is
              enabled.  If a text line wraps, the right margin for  each  line
              on the display is determined by the first character of that dis-
              play line.

       -spacing1 pixels
              Pixels specifies how much additional space should be left  above
              each  text line, using any of the standard forms for screen dis-
              tances.  If a line wraps, this option only applies to the  first
              line on the display.

       -spacing2 pixels
              For  lines  that wrap, this option specifies how much additional
              space to leave between the display lines for a single text line.
              Pixels  may have any of the standard forms for screen distances.

       -spacing3 pixels
              Pixels specifies how much additional space should be left  below
              each  text line, using any of the standard forms for screen dis-
              tances.  If a line wraps, this option only applies to  the  last
              line on the display.

       -tabs tabList
              TabList specifies a set of tab stops in the same form as for the
              -tabs option for the text widget.  This option only applies to a
              display  line  if it applies to the first character on that dis-
              play line.  If this option is specified as an empty  string,  it
              cancels  the  option,  leaving  it  unspecified for the tag (the
              default).  If the option is specified as a non-empty string that
              is  an  empty  list, such as -tags { }, then it requests default
              8-character tabs as described for the tags widget option.

       -underline boolean
              Boolean specifies whether or not to draw an underline underneath
              characters.   It  may  have any of the forms accepted by Tk_Get-
              Boolean.

       -wrap mode
              Mode specifies how to handle  lines  that  are  wider  than  the
              text's window.  It has the same legal values as the -wrap option
              for the text widget:  none, char, or word.  If this  tag  option
              is specified, it overrides the -wrap option for the text widget.

       If a character has several tags associated with it, and if  their  dis-
       play options conflict, then the options of the highest priority tag are
       used.  If a particular display option hasn't been specified for a  par-
       ticular tag, or if it is specified as an empty string, then that option
       will never be used;  the next-highest-priority tag's option  will  used
       instead.   If  no  tag  specifies a particular display option, then the
       default style for the widget will be used.

       The second purpose for tags is event bindings.  You can associate bind-
       ings  with a tag in much the same way you can associate bindings with a
       widget class:  whenever particular X events occur  on  characters  with
       the  given tag, a given Tcl command will be executed.  Tag bindings can
       be used to give behaviors to ranges of characters; among other  things,
       this  allows  hypertext-like  features to be implemented.  For details,
       see the description of the tag bind widget command below.

       The third use for tags is in managing the selection.  See THE SELECTION
       below.


MARKS
       The  second  form  of  annotation in text widgets is a mark.  Marks are
       used for remembering particular places in a text.  They  are  something
       like  tags,  in  that  they  have names and they refer to places in the
       file, but a mark isn't associated with particular characters.  Instead,
       a  mark is associated with the gap between two characters.  Only a sin-
       gle position may be associated with a mark at any given time.   If  the
       characters  around  a  mark are deleted the mark will still remain;  it
       will just have new neighbor characters.  In contrast, if the characters
       containing  a tag are deleted then the tag will no longer have an asso-
       ciation with characters in the file.  Marks may be manipulated with the
       ``pathName  mark''  widget  command, and their current locations may be
       determined by using the mark name as an index in widget commands.

       Each mark also has a gravity, which is either left or right.  The grav-
       ity for a mark specifies what happens to the mark when text is inserted
       at the point of the mark.  If a mark has left gravity, then the mark is
       treated  as  if  it  were attached to the character on its left, so the
       mark will remain to the left of any text inserted at the mark position.
       If  the  mark has right gravity, new text inserted at the mark position
       will appear to the left of the mark (so that the  mark  remains  right-
       most).  The gravity for a mark defaults to right.

       The  name  space  for  marks is different from that for tags:  the same
       name may be used for both a mark and a tag, but they will refer to dif-
       ferent things.

       Two marks have special significance.  First, the mark insert is associ-
       ated with the insertion cursor, as described under THE INSERTION CURSOR
       below.  Second, the mark current is associated with the character clos-
       est to the mouse and is adjusted automatically to track the mouse posi-
       tion and any changes to the text in the widget (one exception:  current
       is not updated in response to mouse motions if a mouse button is  down;
       the  update  will  be  deferred  until  all  mouse  buttons  have  been
       released).  Neither of these special marks may be deleted.


EMBEDDED WINDOWS
       The third form of annotation in text widgets  is  an  embedded  window.
       Each  embedded  window  annotation causes a window to be displayed at a
       particular point in  the text.  There may be  any  number  of  embedded
       windows  in  a  text  widget, and any widget may be used as an embedded
       window (subject to the  usual  rules  for  geometry  management,  which
       require  the  text  window to be the parent of the embedded window or a
       descendant of its parent).   The  embedded  window's  position  on  the
       screen will be updated as the text is modified or scrolled, and it will
       be mapped and unmapped as it moves into and out of the visible area  of
       the  text  widget.  Each embedded window occupies one character's worth
       of index space in the text widget, and it may be referred to either  by
       the  name  of  its  embedded  window or by its position in the widget's
       index space.  If the range of text containing the  embedded  window  is
       deleted then the window is destroyed.

       When  an embedded window is added to a text widget with the window cre-
       ate widget command, several configuration  options  may  be  associated
       with  it.  These options may be  modified later with the window config-
       ure widget command.  The following options are currently supported:

       -align where
              If the window is not as tall as the line in  which  it  is  dis-
              played,  this option determines where the window is displayed in
              the line.  Where must have one of the values top (align the  top
              of the window with the top of the line), center (center the win-
              dow within the range of the line), bottom (align the  bottom  of
              the  window  with  the  bottom  of the line's area), or baseline
              (align the bottom of the window with the baseline of the  line).

       -create script
              Specifies  a Tcl script that may be evaluated to create the win-
              dow for the annotation.  If no -window option has been specified
              for  the annotation this script will be evaluated when the anno-
              tation is about to be displayed on the screen.  Script must cre-
              ate a window for the annotation and return the name of that win-
              dow as its result.  If the annotation's window  should  ever  be
              deleted,  script will be evaluated again the next time the anno-
              tation is displayed.

       -padx pixels
              Pixels specifies the amount of extra space to leave on each side
              of  the  embedded  window.   It  may have any of the usual forms
              defined for a screen distance.

       -pady pixels
              Pixels specifies the amount of extra space to leave on  the  top
              and  on  the  bottom of the embedded window.  It may have any of
              the usual forms defined for a screen distance.

       -stretch boolean
              If the requested height of the embedded window is less than  the
              height  of the line in which it is displayed, this option can be
              used to specify whether the window should  be  stretched  verti-
              cally  to fill its line.  If the -pady option has been specified
              as well, then the requested padding will be retained even if the
              window is stretched.

       -window pathName
              Specifies the name of a window to display in the annotation.


EMBEDDED IMAGES
       The  final  form  of  annotation  in text widgets is an embedded image.
       Each embedded image annotation causes an image to  be  displayed  at  a
       particular  point  in   the  text.  There may be any number of embedded
       images in a text widget, and a particular image may be embedded in mul-
       tiple places in the same text widget.  The embedded image's position on
       the screen will be updated as the text is modified or  scrolled.   Each
       embedded  image  occupies  one  character's worth of index space in the
       text widget, and it may be referred to either by its  position  in  the
       widget's  index  space,  or  the  name it is assigned when the image is
       inserted into the text widget widh image create.  If the range of  text
       containing the embedded image is deleted then that copy of the image is
       removed from the screen.

       When an embedded image is added to a text widget with the image  create
       widget  command,  a  name  unique  to  this  instance  of  the image is
       returned.  This name may then be used to refer to this image  instance.
       The  name  is  taken  to  be  the  value of the -name option (described
       below).  If the -name option is not provided, the -image name  is  used
       instead.   If  the imageName is already in use in the text widget, then
       #nn is added to the end of the imageName,  where  nn  is  an  arbitrary
       integer.   This  insures  the  imageName  is unique.  Once this name is
       assigned to this instance of the image, it does not change, even though
       the -image or -name values can be changed with image configure.

       When  an embedded image is added to a text widget with the image create
       widget command, several configuration options may  be  associated  with
       it.   These options may be modified later with the image configure wid-
       get command.  The following options are currently supported:

       -align where
              If the image is not as tall as the line  in  which  it  is  dis-
              played,  this  option determines where the image is displayed in
              the line.  Where must have one of the values top (align the  top
              of the image with the top of the line), center (center the image
              within the range of the line), bottom (align the bottom  of  the
              image  with  the  bottom of the line's area), or baseline (align
              the bottom of the image with the baseline of the line).

       -image image
              Specifies the name of the Tk image to display in the annotation.
              If image is not a valid Tk image, then an error is returned.

       -name ImageName
              Specifies  the  name  by which this image instance may be refer-
              enced in the text widget. If ImageName is not supplied, then the
              name  of  the  Tk  image  is  used instead.  If the imageName is
              already in use, #nn is appended  to  the  end  of  the  name  as
              described above.

       -padx pixels
              Pixels specifies the amount of extra space to leave on each side
              of the embedded image.  It may  have  any  of  the  usual  forms
              defined for a screen distance.

       -pady pixels
              Pixels  specifies  the amount of extra space to leave on the top
              and on the bottom of the embedded image.  It may have any of the
              usual forms defined for a screen distance.


THE SELECTION
       Selection  support  is  implemented  via  tags.  If the exportSelection
       option for the text widget is true then the sel tag will be  associated
       with the selection:

       [1]    Whenever  characters  are  tagged  with sel the text widget will
              claim ownership of the selection.

       [2]    Attempts to retrieve the selection will be serviced by the  text
              widget, returning all the characters with the sel tag.

       [3]    If  the  selection  is claimed away by another application or by
              another window within this application, then the sel tag will be
              removed from all characters in the text.

       The sel tag is automatically defined when a text widget is created, and
       it may not be deleted with the ``pathName tag delete'' widget  command.
       Furthermore,  the  selectBackground, selectBorderWidth, and selectFore-
       ground options for the text widget are tied to the  -background,  -bor-
       derwidth,  and  -foreground options for the sel tag:  changes in either
       will automatically be reflected in the other.


THE INSERTION CURSOR
       The mark named insert has special significance in text widgets.  It  is
       defined  automatically  when a text widget is created and it may not be
       unset with the ``pathName mark unset'' widget command.  The insert mark
       represents the position of the insertion cursor, and the insertion cur-
       sor will automatically be drawn at this point whenever the text  widget
       has the input focus.


WIDGET COMMAND
       The  text  command  creates a new Tcl command whose name is the same as
       the path name of the text's window.  This command may be used to invoke
       various operations on the widget.  It has the following general form:
              pathName option ?arg arg ...?
       PathName is the name of the command, which is the same as the text wid-
       get's path name.  Option and the args determine the exact  behavior  of
       the command.  The following commands are possible for text widgets:

       pathName bbox index
              Returns  a  list  of four elements describing the screen area of
              the character given by index.  The first  two  elements  of  the
              list  give  the  x and y coordinates of the upper-left corner of
              the area occupied by the character, and the  last  two  elements
              give the width and height of the area.  If the character is only
              partially visible on the screen, then the return value  reflects
              just  the  visible part.  If the character is not visible on the
              screen then the return value is an empty list.

       pathName cget option
              Returns the current value of the configuration option  given  by
              option.   Option may have any of the values accepted by the text
              command.

       pathName compare index1 op index2
              Compares the indices given by index1 and index2 according to the
              relational  operator given by op, and returns 1 if the relation-
              ship is satisfied and 0 if it isn't.  Op  must  be  one  of  the
              operators  <,  <=,  ==,  >=,  >,  or  !=.  If op is == then 1 is
              returned if the two indices refer to the same character,  if  op
              is < then 1 is returned if index1 refers to an earlier character
              in the text than index2, and so on.

       pathName configure ?option? ?value option value ...?
              Query or modify the configuration options of the widget.  If  no
              option is specified, returns a list describing all of the avail-
              able options for pathName (see Tk_ConfigureInfo for  information
              on  the  format  of  this list).  If option is specified with no
              value, then the command returns a list describing the one  named
              option (this list will be identical to the corresponding sublist
              of the value returned if no option is  specified).   If  one  or
              more option-value pairs are specified, then the command modifies
              the given widget option(s) to have the given value(s);  in  this
              case  the  command returns an empty string.  Option may have any
              of the values accepted by the text command.

       pathName debug ?boolean?
              If boolean is specified, then it must have one of  the  true  or
              false values accepted by Tcl_GetBoolean.  If the value is a true
              one then internal consistency checks will be turned on in the B-
              tree  code associated with text widgets.  If boolean has a false
              value then the debugging checks will be turned off.   In  either
              case  the  command  returns  an empty string.  If boolean is not
              specified then the command returns on or off to indicate whether
              or  not  debugging  is  turned  on.  There is a single debugging
              switch shared by all text widgets:  turning debugging on or  off
              in  any  widget turns it on or off for all widgets.  For widgets
              with large amounts of text, the consistency checks may  cause  a
              noticeable slow-down.

       pathName delete index1 ?index2?
              Delete  a range of characters from the text.  If both index1 and
              index2 are specified, then delete all  the  characters  starting
              with  the  one  given  by index1 and stopping just before index2
              (i.e. the character  at  index2  is  not  deleted).   If  index2
              doesn't specify a position later in the text than index1 then no
              characters are deleted.  If index2 isn't specified then the sin-
              gle  character  at  index1  is  deleted.  It is not allowable to
              delete characters in a way that would leave the text  without  a
              newline  as  the  last  character.  The command returns an empty
              string.

       pathName dlineinfo index
              Returns a list with five elements describing the  area  occupied
              by the display line containing index.  The first two elements of
              the list give the x and y coordinates of the  upper-left  corner
              of  the area occupied by the line, the third and fourth elements
              give the width and height of the area,  and  the  fifth  element
              gives  the  position of the baseline for the line, measured down
              from the top of the area.  All of this information  is  measured
              in  pixels.   If  the  current  wrap  mode  is none and the line
              extends beyond the boundaries of the window, the  area  returned
              reflects  the  entire  area  of the line, including the portions
              that are out of the window.  If the line  is  shorter  than  the
              full  width  of  the window then the area returned reflects just
              the portion of the line  that  is  occupied  by  characters  and
              embedded  windows.   If the display line containing index is not
              visible on the screen then the return value is an empty list.

       pathName dump ?switches? index1 ?index2?
              Return the contents of the text widget from index1  up  to,  but
              not  including  index2, including the text and information about
              marks, tags, and embedded windows.  If index2 is not  specified,
              then  it defaults to one character past index1.  The information
              is returned in the following format:

              key1 value1 index1 key2 value2 index2 ...

              The possible key values are text, mark, tagon, tagoff, and  win-
              dow.   The corresponding value is the text, mark name, tag name,
              or window name.  The index information is the index of the start
              of  the  text, the mark, the tag transition, or the window.  One
              or more of the following switches (or abbreviations thereof) may
              be specified to control the dump:

              -all   Return information about all elements: text, marks, tags,
                     images and windows.  This is the default.

              -command command
                     Instead of returning the information as the result of the
                     dump operation, invoke the command on each element of the
                     text widget within the  range.   The  command  has  three
                     arguments appended to it before it is evaluated: the key,
                     value, and index.

              -image Include information about images in the dump results.

              -mark  Include information about marks in the dump results.

              -tag   Include information about tag  transitions  in  the  dump
                     results.  Tag information is returned as tagon and tagoff
                     elements that indicate the begin and end of each range of
                     each tag, respectively.

              -text  Include  information about text in the dump results.  The
                     value is the text up to the next element or  the  end  of
                     range  indicated by index2.  A text element does not span
                     newlines.  A multi-line block of text  that  contains  no
                     marks or tag transitions will still be dumped as a set of
                     text seqments that each end with a newline.  The  newline
                     is part of the value.

              -window
                     Include  information  about  embedded windows in the dump
                     results.  The value of  a  window  is  its  Tk  pathname,
                     unless  the  window  has  not been created yet.  (It must
                     have a create script.)  In this case an empty  string  is
                     returned,  and  you  must  query  the window by its index
                     position to get more information.

       pathName get index1 ?index2?
              Return a range of characters from the text.   The  return  value
              will  be  all  the  characters in the text starting with the one
              whose index is index1 and ending just before the one whose index
              is  index2  (the  character at index2 will not be returned).  If
              index2 is  omitted  then  the  single  character  at  index1  is
              returned.   If  there  are  no characters in the specified range
              (e.g. index1 is past the end of the file or index2 is less  than
              or  equal  to  index1) then an empty string is returned.  If the
              specified range contains embedded windows, no information  about
              them is included in the returned string.

       pathName image option ?arg arg ...?
              This  command is used to manipulate embedded images.  The behav-
              ior of the command depends on the option argument  that  follows
              the  tag  argument.  The following forms of the command are cur-
              rently supported:

              pathName image cget index option
                     Returns the value of a configuration option for an embed-
                     ded  image.   Index  identifies  the  embedded image, and
                     option specifies a particular configuration option, which
                     must  be  one  of the ones listed in the section EMBEDDED
                     IMAGES.

              pathName image configure index ?option value ...?
                     Query or modify the configuration options for an embedded
                     image.   If  no  option  is  specified,  returns  a  list
                     describing all of the available options for the  embedded
                     image  at  index (see Tk_ConfigureInfo for information on
                     the format of this list).  If option is specified with no
                     value, then the command returns a list describing the one
                     named option (this list will be identical to  the  corre-
                     sponding  sublist  of  the value returned if no option is
                     specified).  If one or more option-value pairs are speci-
                     fied,  then  the  command modifies the given option(s) to
                     have the  given  value(s);   in  this  case  the  command
                     returns  an empty string.  See EMBEDDED IMAGES for infor-
                     mation on the options that are supported.

              pathName image create index ?option value ...?
                     This command creates a new image annotation,  which  will
                     appear  in  the text at the position given by index.  Any
                     number of option-value pairs may be specified to  config-
                     ure the annotation.  Returns a unique identifier that may
                     be used as an index to refer to this image.  See EMBEDDED
                     IMAGES for information on the options that are supported,
                     and a description of the identifier returned.

              pathName image names
                     Returns a list whose elements are the names of all  image
                     instances currently embedded in window.

       pathName index index
              Returns   the  position  corresponding  to  index  in  the  form
              line.char where line is the line number and char is the  charac-
              ter  number.   Index  may  have any of the forms described under
              INDICES above.

       pathName insert index chars ?tagList chars tagList ...?
              Inserts all of the chars arguments just before the character  at
              index.   If  index  refers to the end of the text (the character
              after the last newline) then  the  new  text  is  inserted  just
              before  the  last  newline  instead.  If there is a single chars
              argument and no tagList, then the new text will receive any tags
              that  are present on both the character before and the character
              after the insertion point; if a tag is present on  only  one  of
              these  characters  then  it will not be applied to the new text.
              If tagList is specified then it consists of a list of tag names;
              the new characters will receive all of the tags in this list and
              no others, regardless of the tags present around  the  insertion
              point.   If  multiple  chars-tagList argument pairs are present,
              they produce the same effect as if a separate insert widget com-
              mand  had been issued for each pair, in order.  The last tagList
              argument may be omitted.

       pathName mark option ?arg arg ...?
              This command is used to manipulate marks.  The exact behavior of
              the command depends on the option argument that follows the mark
              argument.  The following forms of the command are currently sup-
              ported:

              pathName mark gravity markName ?direction?
                     If  direction  is not specified, returns left or right to
                     indicate which of its  adjacent  characters  markName  is
                     attached  to.  If direction is specified, it must be left
                     or right; the gravity of markName is  set  to  the  given
                     value.

              pathName mark names
                     Returns  a  list  whose elements are the names of all the
                     marks that are currently set.

              pathName mark next index
                     Returns the name of the next mark at or after index.   If
                     index is specified in numerical form, then the search for
                     the next mark begins at that index.  If index is the name
                     of a mark, then the search for the next mark begins imme-
                     diately after that mark.  This can still return a mark at
                     the same position if there are multiple marks at the same
                     index.  These semantics mean that the mark next operation
                     can  be used to step through all the marks in a text wid-
                     get in the same order as the mark information returned by
                     the  dump  operation.  If a mark has been set to the spe-
                     cial end index, then it appears  to  be  after  end  with
                     respect  to  the mark next operation.  An empty string is
                     returned if there are no marks after index.

              pathName mark previous index
                     Returns the name of the mark  at  or  before  index.   If
                     index is specified in numerical form, then the search for
                     the previous mark begins with the character  just  before
                     that  index.   If  index  is the name of a mark, then the
                     search for the next mark begins immediately  before  that
                     mark.   This can still return a mark at the same position
                     if there are multiple marks at  the  same  index.   These
                     semantics  mean  that  the mark previous operation can be
                     used to step through all the marks in a  text  widget  in
                     the reverse order as the mark information returned by the
                     dump operation.  An empty string is returned if there are
                     no marks before index.

              pathName mark set markName index
                     Sets  the  mark  named markName to a position just before
                     the character at index.  If markName already  exists,  it
                     is  moved  from  its old position; if it doesn't exist, a
                     new mark is  created.   This  command  returns  an  empty
                     string.

              pathName mark unset markName ?markName markName ...?
                     Remove  the  mark  corresponding  to each of the markName
                     arguments.  The removed  marks  will  not  be  usable  in
                     indices  and  will  not  be  returned  by future calls to
                     ``pathName mark names''.  This command returns  an  empty
                     string.

       pathName scan option args
              This command is used to implement scanning on texts.  It has two
              forms, depending on option:

              pathName scan mark x y
                     Records x and y and the current view in the text  window,
                     for  use  in conjunction with later scan dragto commands.
                     Typically this command is associated with a mouse  button
                     press in the widget.  It returns an empty string.

              pathName scan dragto x y
                     This  command computes the difference between its x and y
                     arguments and the x and y arguments to the last scan mark
                     command  for  the widget.  It then adjusts the view by 10
                     times the difference in  coordinates.   This  command  is
                     typically associated with mouse motion events in the wid-
                     get, to produce the effect of dragging the text  at  high
                     speed  through  the window.  The return value is an empty
                     string.

       pathName search ?switches? pattern index ?stopIndex?
              Searches the text in pathName starting at index for a  range  of
              characters that matches pattern.  If a match is found, the index
              of the first character in the match is returned as result;  oth-
              erwise  an empty string is returned.  One or more of the follow-
              ing switches (or abbreviations thereof) may be specified to con-
              trol the search:

              -forwards
                     The search will proceed forward through the text, finding
                     the first matching range starting at or after  the  posi-
                     tion given by index.  This is the default.

              -backwards
                     The  search will proceed backward through the text, find-
                     ing the matching range closest to index whose first char-
                     acter is before index.

              -exact Use exact matching:  the characters in the matching range
                     must be identical to  those  in  pattern.   This  is  the
                     default.

              -regexp
                     Treat  pattern  as  a  regular  expression  and  match it
                     against the text using the rules for regular  expressions
                     (see the regexp command for details).

              -nocase
                     Ignore case differences between the pattern and the text.

              -count varName
                     The argument following -count gives the name of  a  vari-
                     able;  if a match is found, the number of index positions
                     between beginning and end of the matching range  will  be
                     stored  in the variable.  If there are no embedded images
                     or windows in the matching range, this is  equivalent  to
                     the  number  of  characters matched.  In either case, the
                     range matchIdx to matchIdx + $count chars will return the
                     entire matched text.

              -elide Find  elidden (hidden) text as well. By default only dis-
                     played text is searched.

              --     This switch has no effect except to terminate the list of
                     switches:  the  next  argument will be treated as pattern
                     even if it starts with -.

              The matching range must be entirely  within  a  single  line  of
              text.   For regular expression matching the newlines are removed
              from the ends of the lines before matching:  use the  $  feature
              in  regular  expressions  to match the end of a line.  For exact
              matching the newlines are retained.  If stopIndex is  specified,
              the  search  stops at that index: for forward searches, no match
              at  or  after  stopIndex  will  be  considered;   for   backward
              searches,  no  match  earlier in the text than stopIndex will be
              considered.  If stopIndex is omitted, the entire  text  will  be
              searched:  when the beginning or end of the text is reached, the
              search continues at the other end until the starting location is
              reached  again;   if stopIndex is specified, no wrap-around will
              occur.

       pathName see index
              Adjusts the view in the window so that the  character  given  by
              index  is  completely visible.  If index is already visible then
              the command does nothing.  If index is a short distance  out  of
              view,  the  command  adjusts  the view just enough to make index
              visible at the edge of the window.  If index is far out of view,
              then the command centers index in the window.

       pathName tag option ?arg arg ...?
              This  command is used to manipulate tags.  The exact behavior of
              the command depends on the option argument that follows the  tag
              argument.  The following forms of the command are currently sup-
              ported:

              pathName tag add tagName index1 ?index2 index1 index2 ...?
                     Associate the tag tagName  with  all  of  the  characters
                     starting  with  index1 and ending just before index2 (the
                     character at index2 isn't tagged).  A single command  may
                     contain  any  number of index1-index2 pairs.  If the last
                     index2 is omitted then the single character at index1  is
                     tagged.   If  there  are  no  characters in the specified
                     range (e.g. index1 is past the end of the file or  index2
                     is  less than or equal to index1) then the command has no
                     effect.

              pathName tag bind tagName ?sequence? ?script?
                     This command associates script with the tag given by tag-
                     Name.   Whenever  the  event  sequence  given by sequence
                     occurs for a character that has been tagged with tagName,
                     the script will be invoked.  This widget command is simi-
                     lar to the bind command except that it operates on  char-
                     acters  in  a  text  rather than entire widgets.  See the
                     bind manual entry for complete details on the  syntax  of
                     sequence and the substitutions performed on script before
                     invoking it.  If all arguments are specified then  a  new
                     binding  is  created,  replacing any existing binding for
                     the same sequence and tagName (if the first character  of
                     script  is ``+'' then script augments an existing binding
                     rather than replacing it).  In this case the return value
                     is  an  empty string.  If script is omitted then the com-
                     mand returns  the  script  associated  with  tagName  and
                     sequence  (an  error occurs if there is no such binding).
                     If both script and sequence are omitted then the  command
                     returns  a  list  of all the sequences for which bindings
                     have been defined for tagName.

                     The only events for which bindings may be  specified  are
                     those  related  to the mouse and keyboard (such as Enter,
                     Leave, ButtonPress,  Motion,  and  KeyPress)  or  virtual
                     events.  Event bindings for a text widget use the current
                     mark described under MARKS above.  An Enter  event  trig-
                     gers  for a tag when the tag first becomes present on the
                     current character, and a Leave event triggers for  a  tag
                     when  it  ceases  to be present on the current character.
                     Enter and Leave events can happen either because the cur-
                     rent mark moved or because the character at that position
                     changed.  Note that these events are different than Enter
                     and  Leave events for windows.  Mouse and keyboard events
                     are directed to the  current  character.   If  a  virtual
                     event is used in a binding, that binding can trigger only
                     if the virtual event is defined by an  underlying  mouse-
                     related or keyboard-related event.

                     It is possible for the current character to have multiple
                     tags, and for each of them to have a binding for  a  par-
                     ticular event sequence.  When this occurs, one binding is
                     invoked for each tag, in order  from  lowest-priority  to
                     highest  priority.   If there are multiple matching bind-
                     ings for a single tag, then the most specific binding  is
                     chosen  (see  the  manual  entry for the bind command for
                     details).  continue and  break  commands  within  binding
                     scripts  are  processed  in  the same way as for bindings
                     created with the bind command.

                     If bindings are created for the widget as a  whole  using
                     the bind command, then those bindings will supplement the
                     tag bindings.  The tag bindings will  be  invoked  first,
                     followed by bindings for the window as a whole.

              pathName tag cget tagName option
                     This  command  returns  the  current  value of the option
                     named option associated with the tag  given  by  tagName.
                     Option  may  have  any  of the values accepted by the tag
                     configure widget command.

              pathName tag configure tagName ?option?  ?value?  ?option  value
              ...?
                     This command is similar to the configure  widget  command
                     except  that  it modifies options associated with the tag
                     given by tagName instead of  modifying  options  for  the
                     overall text widget.  If no option is specified, the com-
                     mand returns a  list  describing  all  of  the  available
                     options for tagName (see Tk_ConfigureInfo for information
                     on the format of this list).  If option is specified with
                     no  value, then the command returns a list describing the
                     one named option (this list will be identical to the cor-
                     responding  sublist of the value returned if no option is
                     specified).  If one or more option-value pairs are speci-
                     fied,  then  the  command modifies the given option(s) to
                     have the given value(s) in tagName; in this case the com-
                     mand returns an empty string.  See TAGS above for details
                     on the options available for tags.

              pathName tag delete tagName ?tagName ...?
                     Deletes all tag information for each of the tagName argu-
                     ments.   The command removes the tags from all characters
                     in the file and also deletes any other information  asso-
                     ciated with the tags, such as bindings and display infor-
                     mation.  The command returns an empty string.

              pathName tag lower tagName ?belowThis?
                     Changes the priority of tag tagName so that  it  is  just
                     lower  in  priority than the tag whose name is belowThis.
                     If belowThis  is  omitted,  then  tagName's  priority  is
                     changed to make it lowest priority of all tags.

              pathName tag names ?index?
                     Returns  a  list  whose elements are the names of all the
                     tags that are active at the character position  given  by
                     index.   If  index is omitted, then the return value will
                     describe all of the tags that exist for  the  text  (this
                     includes  all  tags  that have been named in a ``pathName
                     tag'' widget  command  but  haven't  been  deleted  by  a
                     ``pathName  tag delete'' widget command, even if no char-
                     acters are currently marked with the tag).  The list will
                     be sorted in order from lowest priority to highest prior-
                     ity.

              pathName tag nextrange tagName index1 ?index2?
                     This command searches the text for a range of  characters
                     tagged  with  tagName  where  the  first character of the
                     range is no earlier than the character at index1  and  no
                     later  than  the  character  just  before index2 (a range
                     starting at index2 will not be considered).   If  several
                     matching ranges exist, the first one is chosen.  The com-
                     mand's return value is a list  containing  two  elements,
                     which  are  the index of the first character of the range
                     and the index of the character just after the last one in
                     the range.  If no matching range is found then the return
                     value is an empty string.  If index2 is not given then it
                     defaults to the end of the text.

              pathName tag prevrange tagName index1 ?index2?
                     This  command searches the text for a range of characters
                     tagged with tagName where  the  first  character  of  the
                     range  is  before  the character at index1 and no earlier
                     than the character at index2 (a range starting at  index2
                     will  be  considered).  If several matching ranges exist,
                     the one closest  to  index1  is  chosen.   The  command's
                     return value is a list containing two elements, which are
                     the index of the first character of  the  range  and  the
                     index  of  the  character  just after the last one in the
                     range.  If no matching range is  found  then  the  return
                     value is an empty string.  If index2 is not given then it
                     defaults to the beginning of the text.

              pathName tag raise tagName ?aboveThis?
                     Changes the priority of tag tagName so that  it  is  just
                     higher  in priority than the tag whose name is aboveThis.
                     If aboveThis  is  omitted,  then  tagName's  priority  is
                     changed to make it highest priority of all tags.

              pathName tag ranges tagName
                     Returns  a list describing all of the ranges of text that
                     have been tagged with tagName.  The first two elements of
                     the list describe the first tagged range in the text, the
                     next two elements describe the second range, and  so  on.
                     The  first element of each pair contains the index of the
                     first character of the range, and the second  element  of
                     the  pair  contains the index of the character just after
                     the last one in the range.  If there  are  no  characters
                     tagged with tag then an empty string is returned.

              pathName tag remove tagName index1 ?index2 index1 index2 ...?
                     Remove  the tag tagName from all of the characters start-
                     ing at index1 and ending just before index2 (the  charac-
                     ter at index2 isn't affected).  A single command may con-
                     tain any number of  index1-index2  pairs.   If  the  last
                     index2  is omitted then the single character at index1 is
                     tagged.  If there are  no  characters  in  the  specified
                     range  (e.g. index1 is past the end of the file or index2
                     is less than or equal to index1) then the command has  no
                     effect.  This command returns an empty string.

       pathName window option ?arg arg ...?
              This command is used to manipulate embedded windows.  The behav-
              ior of the command depends on the option argument  that  follows
              the  tag  argument.  The following forms of the command are cur-
              rently supported:

              pathName window cget index option
                     Returns the value of a configuration option for an embed-
                     ded  window.   Index  identifies the embedded window, and
                     option specifies a particular configuration option, which
                     must  be  one  of the ones listed in the section EMBEDDED
                     WINDOWS.

              pathName window configure index ?option value ...?
                     Query or modify the configuration options for an embedded
                     window.   If  no  option  is  specified,  returns  a list
                     describing all of the available options for the  embedded
                     window  at index (see Tk_ConfigureInfo for information on
                     the format of this list).  If option is specified with no
                     value, then the command returns a list describing the one
                     named option (this list will be identical to  the  corre-
                     sponding  sublist  of  the value returned if no option is
                     specified).  If one or more option-value pairs are speci-
                     fied,  then  the  command modifies the given option(s) to
                     have the  given  value(s);   in  this  case  the  command
                     returns an empty string.  See EMBEDDED WINDOWS for infor-
                     mation on the options that are supported.

              pathName window create index ?option value ...?
                     This command creates a new window annotation, which  will
                     appear  in  the text at the position given by index.  Any
                     number of option-value pairs may be specified to  config-
                     ure the annotation.  See EMBEDDED WINDOWS for information
                     on the options that  are  supported.   Returns  an  empty
                     string.

              pathName window names
                     Returns  a  list whose elements are the names of all win-
                     dows currently embedded in window.

       pathName xview option args
              This command is used to query and change the horizontal position
              of the text in the widget's window.  It can take any of the fol-
              lowing forms:

              pathName xview
                     Returns a list containing two elements.  Each element  is
                     a  real fraction between 0 and 1;  together they describe
                     the portion of the document's  horizontal  span  that  is
                     visible in the window.  For example, if the first element
                     is .2 and the second element is .6, 20% of  the  text  is
                     off-screen  to the left, the middle 40% is visible in the
                     window, and 40% of the text is off-screen to  the  right.
                     The  fractions  refer only to the lines that are actually
                     visible in the window:  if the lines in  the  window  are
                     all  very  short,  so that they are entirely visible, the
                     returned fractions will be 0 and 1,  even  if  there  are
                     other lines in the text that are much wider than the win-
                     dow.  These are the same values passed to scrollbars  via
                     the -xscrollcommand option.

              pathName xview moveto fraction
                     Adjusts  the  view  in the window so that fraction of the
                     horizontal span of the text is off-screen  to  the  left.
                     Fraction is a fraction between 0 and 1.

              pathName xview scroll number what
                     This  command shifts the view in the window left or right
                     according to number and what.  Number must be an integer.
                     What  must be either units or pages or an abbreviation of
                     one of these.  If what is units, the view adjusts left or
                     right  by number average-width characters on the display;
                     if it is pages then the view adjusts  by  number  screen-
                     fuls.   If  number is negative then characters farther to
                     the left become visible;  if it is positive then  charac-
                     ters farther to the right become visible.

       pathName yview ?args?
              This  command  is used to query and change the vertical position
              of the text in the widget's window.  It can take any of the fol-
              lowing forms:

              pathName yview
                     Returns a list containing two elements, both of which are
                     real fractions between 0 and 1.  The first element  gives
                     the  position  of  the first character in the top line in
                     the window, relative to the text as a whole (0.5 means it
                     is  halfway  through  the text, for example).  The second
                     element gives the position of the  character  just  after
                     the  last  one in the bottom line of the window, relative
                     to the text as a whole.  These are the same values passed
                     to scrollbars via the -yscrollcommand option.

              pathName yview moveto fraction
                     Adjusts  the  view  in  the  window so that the character
                     given by fraction appears on the top line of the  window.
                     Fraction  is a fraction between 0 and 1;  0 indicates the
                     first character in the text, 0.33 indicates the character
                     one-third the way through the text, and so on.

              pathName yview scroll number what
                     This  command  adjust  the  view in the window up or down
                     according to number and what.  Number must be an integer.
                     What  must  be  either units or pages.  If what is units,
                     the view adjusts up or down by number lines on  the  dis-
                     play;   if  it  is  pages then the view adjusts by number
                     screenfuls.  If number is negative then earlier positions
                     in the text become visible;  if it is positive then later
                     positions in the text become visible.

              pathName yview ?-pickplace? index
                     Changes the view in the widget's  window  to  make  index
                     visible.   If  the -pickplace option isn't specified then
                     index will appear at the top of the  window.   If  -pick-
                     place  is  specified  then the widget chooses where index
                     appears in the window:

                      [1]    If index is already visible somewhere in the win-
                             dow then the command does nothing.

                      [2]    If index is only a few lines off-screen above the
                             window then it will be positioned at the  top  of
                             the window.

                      [3]    If index is only a few lines off-screen below the
                             window then it will be positioned at  the  bottom
                             of the window.

                      [4]    Otherwise,  index will be centered in the window.

                     The -pickplace option has been obsoleted by the see  wid-
                     get  command  (see handles both x- and y-motion to make a
                     location visible, whereas -pickplace only handles  motion
                     in y).

              pathName yview number
                     This  command makes the first character on the line after
                     the one given by number visible at the top of the window.
                     Number  must be an integer.  This command used to be used
                     for scrolling, but now it is obsolete.


BINDINGS
       Tk automatically creates class bindings for texts that  give  them  the
       following  default  behavior.   In  the descriptions below, ``word'' is
       dependent on the value of the tcl_wordchars variable.  See  tclvars(n).

       [1]    Clicking  mouse  button  1  positions  the insertion cursor just
              before the character underneath the mouse cursor, sets the input
              focus  to  this  widget, and clears any selection in the widget.
              Dragging with mouse button 1 strokes out a selection between the
              insertion cursor and the character under the mouse.

       [2]    Double-clicking  with  mouse button 1 selects the word under the
              mouse and positions the insertion cursor at the beginning of the
              word.  Dragging after a double click will stroke out a selection
              consisting of whole words.

       [3]    Triple-clicking with mouse button 1 selects the line  under  the
              mouse and positions the insertion cursor at the beginning of the
              line.  Dragging after a triple click will stroke out a selection
              consisting of whole lines.

       [4]    The ends of the selection can be adjusted by dragging with mouse
              button 1 while the Shift key is down;  this will adjust the  end
              of  the selection that was nearest to the mouse cursor when but-
              ton 1 was pressed.  If the button is double-clicked before drag-
              ging  then  the  selection  will  be  adjusted in units of whole
              words;  if it is  triple-clicked  then  the  selection  will  be
              adjusted in units of whole lines.

       [5]    Clicking  mouse  button 1 with the Control key down will reposi-
              tion the insertion cursor without affecting the selection.

       [6]    If any normal printing characters are typed, they  are  inserted
              at the point of the insertion cursor.

       [7]    The  view  in  the widget can be adjusted by dragging with mouse
              button 2.  If mouse button  2  is  clicked  without  moving  the
              mouse,  the selection is copied into the text at the position of
              the mouse cursor.  The Insert key also  inserts  the  selection,
              but at the position of the insertion cursor.

       [8]    If  the  mouse  is  dragged  out of the widget while button 1 is
              pressed, the entry will automatically scroll to make  more  text
              visible  (if there is more text off-screen on the side where the
              mouse left the window).

       [9]    The Left and Right keys move the insertion cursor one  character
              to  the  left  or  right;   they also clear any selection in the
              text.  If Left or Right is typed with the Shift key  down,  then
              the  insertion  cursor  moves  and  the selection is extended to
              include the new character.  Control-Left and Control-Right  move
              the  insertion  cursor by words, and Control-Shift-Left and Con-
              trol-Shift-Right move the insertion cursor  by  words  and  also
              extend  the  selection.  Control-b and Control-f behave the same
              as Left and Right, respectively.  Meta-b and Meta-f  behave  the
              same as Control-Left and Control-Right, respectively.

       [10]   The  Up  and  Down keys move the insertion cursor one line up or
              down and clear any selection in the text.  If  Up  or  Right  is
              typed  with  the Shift key down, then the insertion cursor moves
              and the selection is extended  to  include  the  new  character.
              Control-Up  and  Control-Down move the insertion cursor by para-
              graphs (groups of lines separated by blank lines), and  Control-
              Shift-Up  and  Control-Shift-Down  move  the insertion cursor by
              paragraphs and also extend the selection.   Control-p  and  Con-
              trol-n behave the same as Up and Down, respectively.

       [11]   The  Next  and  Prior  keys move the insertion cursor forward or
              backwards by one screenful and clear any selection in the  text.
              If the Shift key is held down while Next or Prior is typed, then
              the selection is extended to include the  new  character.   Con-
              trol-v  moves  the  view  down  one screenful without moving the
              insertion cursor or adjusting the selection.

       [12]   Control-Next and Control-Prior scroll the view right or left  by
              one  page  without  moving the insertion cursor or affecting the
              selection.

       [13]   Home and Control-a move the insertion cursor to the beginning of
              its  line  and  clear  any  selection in the widget.  Shift-Home
              moves the insertion cursor to the beginning of the line and also
              extends the selection to that point.

       [14]   End  and  Control-e  move the insertion cursor to the end of the
              line and clear any selection in the widget.  Shift-End moves the
              cursor  to the end of the line and extends the selection to that
              point.

       [15]   Control-Home and Meta-< move the insertion cursor to the  begin-
              ning  of  the  text and clear any selection in the widget.  Con-
              trol-Shift-Home moves the insertion cursor to the  beginning  of
              the text and also extends the selection to that point.

       [16]   Control-End  and  Meta-> move the insertion cursor to the end of
              the text and clear any selection in the widget.   Control-Shift-
              End  moves  the  cursor  to  the end of the text and extends the
              selection to that point.

       [17]   The Select key and Control-Space set the selection anchor to the
              position of the insertion cursor.  They don't affect the current
              selection.   Shift-Select  and  Control-Shift-Space  adjust  the
              selection  to  the  current  position  of  the insertion cursor,
              selecting from the anchor to the insertion cursor if  there  was
              not any selection previously.

       [18]   Control-/ selects the entire contents of the widget.

       [19]   Control-\ clears any selection in the widget.

       [20]   The  F16  key (labelled Copy on many Sun workstations) or Meta-w
              copies the selection in the widget to the clipboard, if there is
              a selection.

       [21]   The F20 key (labelled Cut on many Sun workstations) or Control-w
              copies the selection in the widget to the clipboard and  deletes
              the  selection.   If  there  is  no selection in the widget then
              these keys have no effect.

       [22]   The F18 key (labelled Paste on many Sun  workstations)  or  Con-
              trol-y  inserts the contents of the clipboard at the position of
              the insertion cursor.

       [23]   The Delete key deletes the selection, if there  is  one  in  the
              widget.   If  there is no selection, it deletes the character to
              the right of the insertion cursor.

       [24]   Backspace and Control-h delete the selection, if there is one in
              the widget.  If there is no selection, they delete the character
              to the left of the insertion cursor.

       [25]   Control-d deletes the character to the right  of  the  insertion
              cursor.

       [26]   Meta-d deletes the word to the right of the insertion cursor.

       [27]   Control-k  deletes  from  the insertion cursor to the end of its
              line; if the insertion cursor is already at the end of  a  line,
              then Control-k deletes the newline character.

       [28]   Control-o  opens  a new line by inserting a newline character in
              front of the insertion cursor without moving the insertion  cur-
              sor.

       [29]   Meta-backspace  and  Meta-Delete  delete the word to the left of
              the insertion cursor.

       [30]   Control-x deletes whatever is selected in the text widget.

       [31]   Control-t reverses the order of the two characters to the  right
              of the insertion cursor.

       If  the  widget  is disabled using the -state option, then its view can
       still be adjusted and text can still be selected, but no insertion cur-
       sor will be displayed and no text modifications will take place.

       The behavior of texts can be changed by defining new bindings for indi-
       vidual widgets or by redefining the class bindings.


PERFORMANCE ISSUES
       Text widgets should run efficiently under a variety of conditions.  The
       text  widget uses about 2-3 bytes of main memory for each byte of text,
       so texts containing a megabyte or more  should  be  practical  on  most
       workstations.   Text  is  represented internally with a modified B-tree
       structure that makes operations relatively efficient  even  with  large
       texts.   Tags are included in the B-tree structure in a way that allows
       tags to span large ranges or have many disjoint smaller ranges  without
       loss  of  efficiency.   Marks are also implemented in a way that allows
       large numbers of marks.  In most cases it is fine to have large numbers
       of unique tags, or a tag that has many distinct ranges.

       One  performance problem can arise if you have hundreds or thousands of
       different tags that all have the following characteristics:  the  first
       and last ranges of each tag are near the beginning and end of the text,
       respectively, or a single tag range covers most  of  the  text  widget.
       The  cost  of adding and deleting tags like this is proportional to the
       number of other tags with the same properties.  In contrast,  there  is
       no  problem  with  having  thousands  of distinct tags if their overall
       ranges are localized and spread uniformly throughout the text.

       Very long text lines can be expensive, especially  if  they  have  many
       marks and tags within them.

       The display line with the insert cursor is redrawn each time the cursor
       blinks, which causes a steady stream  of  graphics  traffic.   Set  the
       insertOffTime attribute to 0 avoid this.

KEYWORDS
