Return-Path: <wmacfarl@MIT.EDU>
Received: from grand-central-station.mit.edu by po11.mit.edu (8.9.2/4.7) id WAA17186; Wed, 19 Dec 2001 22:35:31 -0500 (EST)
Received: from melbourne-city-street.mit.edu (MELBOURNE-CITY-STREET.MIT.EDU [18.7.21.86])
	by grand-central-station.mit.edu (8.9.2/8.9.2) with ESMTP id WAA28900
	for <in-house-pikans@mit.edu>; Wed, 19 Dec 2001 22:35:26 -0500 (EST)
Received: from happiness-hotel.mit.edu (HAPPINESS-HOTEL.MIT.EDU [18.214.0.52])
	by melbourne-city-street.mit.edu (8.9.2/8.9.2) with ESMTP id WAA00813
	for <in-house-pikans@mit.edu>; Wed, 19 Dec 2001 22:35:25 -0500 (EST)
Received: from localhost (wmacfarl@localhost) by happiness-hotel.mit.edu (8.9.3) with ESMTP
	id WAA10296; Wed, 19 Dec 2001 22:35:26 -0500
Date: Wed, 19 Dec 2001 22:35:25 -0500 (EST)
From: William F MacFarlane <wmacfarl@MIT.EDU>
To: <in-house-pikans@mit.edu>
Subject: hot water and sanitizer
In-Reply-To: <200112200107.UAA09331@home-on-the-dome.mit.edu>
Message-ID: <Pine.LNX.4.30L.0112192226530.10276-100000@happiness-hotel.mit.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII

	So, here's the scoop on cleaning dishes:
	The sanitizer works as a sanitizer because it has its own heating
mechanism, and pays attention to the temperature of the water rather than
the amount of time that it's been heating to know when to stop.  This is
a good thing.
	A bad thing is that the sanitizer, clever little devil that it is,
also knows to take water from the hot water supply.  Because the hot water
supply does not supply at the moment this is a bit of a conundrum.
	What YOU must do, as a good dish-washing pikan is fill the
sanitizer up with cold water from the sink to get it started.  This
provides it with the raw materials it has suddenly found itself unable to
attain that it needs to do its job.
	In my somewhat limited experience, this is not quite enough to
coax the beast to working.  The sanitizer doesn't seem to realize that it
has water to work with when you do this, and so won't start unless you
prod it some more.  The method of prodding that works is shifting the
sanitizer to drain, and then quickly back to sanitize.

	Short version:
	Fill sanitizer with cold water (1.7 largish pots)
	Quickly cycle from drain to sanitize
	Wait until it heats - it'll take a while because it's starting out
	cold
	Sanitize as normal... what fun!

Will
wmacfarl@mit.edu


