Return-Path: <scs@eskimo.com>
Received: from fort-point-station.mit.edu by po11.mit.edu (8.9.2/4.7) id LAA13220; Thu, 20 Dec 2001 11:02:07 -0500 (EST)
Received: from mail.eskimo.com (mail.eskimo.com [204.122.16.4])
	by fort-point-station.mit.edu (8.9.2/8.9.2) with ESMTP id LAA05266;
	Thu, 20 Dec 2001 11:02:00 -0500 (EST)
Received: from eskimo.com (scs@eskimo.com [204.122.16.13])
	by mail.eskimo.com (8.9.1a/8.8.8) with ESMTP id IAA10248;
	Thu, 20 Dec 2001 08:01:58 -0800 (PST)
Date: Thu, 20 Dec 2001 08:01:58 -0800 (PST)
Message-Id: <200112201601.IAA10248@mail.eskimo.com>
From: scs@eskimo.com (Steve Summit)
Reply-To: scs@eskimo.com
To: in-house-pikans@mit.edu
Subject: Re: hot water and sanitizer
In-Reply-To: <Pine.LNX.4.30L.0112192226530.10276-100000@happiness-hotel.mit.edu>
	<Pine.LNX.4.30L.0112192243150.10655-100000@happiness-hotel.mit.edu>
Cc: nutso-flaming-pikans@mit.edu, scs@eskimo.com

William F MacFarlane wrote:
>	A bad thing is that the sanitizer, clever little devil that it is,
> also knows to take water from the hot water supply.  Because the hot water
> supply does not supply at the moment this is a bit of a conundrum.
>	What YOU must do, as a good dish-washing pikan is fill the
> sanitizer up with cold water from the sink to get it started...

There's a super secret, alternative solution.

Lo these many years ago, in 1981 or so, when a previous water
heater gave out and I replaced it, I thought this would be a
useful problem to solve.  (It turns out I was wrong, but read on.)
I installed a bypass valve above the water heater which enables
you to divert cold water into the hot water pipes, while leaving
the water heater completely isolated (i.e. while it's being
replaced).  This valve is intended to be opened only during those
occasions when the water heater is broken, and only in order to
get water to the sterilizer which it can then try to heat.

Now, in fact, it sounds like cold water is so non-useful in the
sterilizer that filling it some other way (i.e. with water boiled
on the stove) is a better idea anyway.  And, as far as I know, in
20 years the only time that bypass valve has ever been opened was
by a housemanager whose name I won't mention (but whose initials
are Jenifer Tidwell) who tried to fix a hot-water-not-hot-enough
problem by opening it, thus making the problem even worse (i.e. by
mixing cold water in with the hot).  So, in retrospect, although
I still give myself an A+ for forward thinking, I have to concede
that the bypass valve gets at best a C- for practicality.

(Still, it might be fun to open it, now that its time has come,
and to enable the sterilizer to do its trickle-fill thing after
each load.  OTOH, hopefully by tonight when it's time to do
dishes again, the water heater'll be replaced anyway...)

scs '83
