Return-Path: <jhawk@MIT.EDU>
Received: from central-city-carrier-station.mit.edu by po11.mit.edu (8.9.2/4.7) id PAA00636; Sat, 16 Mar 2002 15:01:22 -0500 (EST)
Received: from melbourne-city-street.mit.edu (MELBOURNE-CITY-STREET.MIT.EDU [18.7.21.86])
	by central-city-carrier-station.mit.edu (8.9.2/8.9.2) with ESMTP id PAA07041;
	Sat, 16 Mar 2002 15:00:54 -0500 (EST)
Received: from multics.mit.edu (MULTICS.MIT.EDU [18.187.1.73])
	by melbourne-city-street.mit.edu (8.9.2/8.9.2) with ESMTP id PAA17613;
	Sat, 16 Mar 2002 15:00:54 -0500 (EST)
Received: (from jhawk@localhost) by multics.mit.edu (8.9.3)
	id PAA17732; Sat, 16 Mar 2002 15:00:53 -0500 (EST)
Date: Sat, 16 Mar 2002 15:00:53 -0500 (EST)
Message-Id: <200203162000.PAA17732@multics.mit.edu>
To: bugs@mit.edu
cc: sipb-office@mit.edu
Subject: csw hokey
From: John Hawkinson <jhawk@MIT.EDU>

I encountered a variety of lovely failures on coleco-sidewinder (9.0.23
sunblde) just now:

	While typing, suddenly the letter "h" started producing "hm".
	xev showed that only an h event was being received. The letter
	'm' did nothing.

	I unplugged the keyboard and plugged it back in.
	'h' produces only 'h'. 'm' is not produced by anything.
	Also, I cannot type a capital B (nothing happens). Lowercase
	B works just fine.

	STOP-A produces no 'ok' prompt, but the machine freezes,
	and typing 'go' works.

	'eeprom' shows the output going somewhere sensical looking (screen?)

	Logging out doesn't help.

	CTRL-P kills the X server, but it restarts immediately
	with no text-mode login prompt. THe 'm' still doesn't work.

	I unplug the keyboard, and unplug the Y-mouse adapter (with
	nothing attached to it). I plug the keyboard back in. I
	get a flickering white screen. STOP-A doesn't seem to work
	at all (much less display).

	The power button doesn't work.

	I hold down the power button for 5s and the machine goes off.

	I start the machine with the power button. The monitor stays
	black. I'm told the machine pings. Still no output.

	I try swapping the monitor cable from the PCI video card to
	the onboard card. No change. Monitor still black and power-saved.

	I give up, as I have to leave.

--jhawk
