Return-Path: <foner@media.mit.edu>
Received: from fort-point-station.mit.edu by po11.mit.edu (8.9.2/4.7) id XAA15705; Fri, 17 May 2002 23:13:23 -0400 (EDT)
Received: from out-of-band.media.mit.edu (out-of-band.media.mit.edu [18.85.16.22])
	by fort-point-station.mit.edu (8.9.2/8.9.2) with ESMTP id XAA14447;
	Fri, 17 May 2002 23:12:32 -0400 (EDT)
Received: (from foner@localhost)
	by out-of-band.media.mit.edu (8.9.3/8.9.3/MEDIA) id XAA02548;
	Fri, 17 May 2002 23:12:31 -0400 (EDT)
Date: Fri, 17 May 2002 23:12:31 -0400 (EDT)
Message-Id: <200205180312.XAA02548@out-of-band.media.mit.edu>
From: Lenny Foner <foner@media.mit.edu>
To: Jacob Morzinski <jmorzins@MIT.EDU>
In-reply-to: <Pine.GSO.4.30L.0205172206340.2348-100000@multics.mit.edu>
	(message from Jacob Morzinski on Fri, 17 May 2002 22:37:08 -0400
	(EDT))
Subject: Which hard disk vendor do you trust?
CC: foner@media.mit.edu, sipb@MIT.EDU

    Date: Fri, 17 May 2002 22:37:08 -0400 (EDT)
    From: Jacob Morzinski <jmorzins@MIT.EDU>

    The summary is that IBM is not backpedalling -- they're making public
    a design parameter.  IDE drives are only designed to be on 333 hours
    per month (11 hours/day), and have been designed this way for years.

And they're being sued for it, by users who (quite rightly) think that
they were lied to by the omission.  Who would have expected such a
parameter if they were buying a disk for a computer?  Not me, and not
thousands of others, apparently.

    I found a document written in 2000 that claims to be from IBM's
    storage division, but which I can no longer find on IBM's site.
    Nevertheless, the document supports the 333 hours/month parameter, and
    also says that SCSI is designed for 732 hours/month (24 hours/day).

I find it difficult to believe that no IDE drive on the market is
rated for 24/7 operation.  You'd think that someone would make
drives that could actually take continuous use but -not- also
require them to have a SCSI interface.  There is certainly equipment
on the market that's designed to be on continuously but also takes
only IDE drives.

    The obvious question is: "how much of a premium are willing to pay for
    reliability?  Is changing to SCSI too much?"

When I said "must", I meant "must".  The device I'm using them in
cannot take SCSI drives and is not open-architecture and this will
never change.

Hence, I need reliable -IDE- drives.  Recommendations to go to SCSI
because they're magically more reliable won't help me, alas.
