Return-Path: <nathanw@MIT.EDU>
Received: from grand-central-station.mit.edu by po11.mit.edu (8.9.2/4.7) id XAA19700; Sun, 19 May 2002 23:38:24 -0400 (EDT)
Received: from melbourne-city-street.mit.edu (MELBOURNE-CITY-STREET.MIT.EDU [18.7.21.86])
	by grand-central-station.mit.edu (8.9.2/8.9.2) with ESMTP id XAA12971;
	Sun, 19 May 2002 23:37:44 -0400 (EDT)
Received: from department-of-alchemy.mit.edu (DEPARTMENT-OF-ALCHEMY.MIT.EDU [18.7.16.69])
	by melbourne-city-street.mit.edu (8.9.2/8.9.2) with ESMTP id XAA18427;
	Sun, 19 May 2002 23:37:44 -0400 (EDT)
Received: (from nathanw@localhost) by department-of-alchemy.mit.edu (8.9.3)
	id XAA07751; Sun, 19 May 2002 23:37:44 -0400 (EDT)
To: Lenny Foner <foner@media.MIT.EDU>
Cc: marc@mit.edu, tytso@mit.edu, jmorzins@mit.edu, sipb@mit.edu
Subject: Re: Which hard disk vendor do you trust?
References: <200205200325.XAA07739@out-of-band.media.mit.edu>
From: nathanw@MIT.EDU (Nathan J. Williams)
Date: 19 May 2002 23:37:44 -0400
In-Reply-To: <200205200325.XAA07739@out-of-band.media.mit.edu>
Message-ID: <mtu4rh332wn.fsf@department-of-alchemy.mit.edu>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii

Lenny Foner <foner@media.mit.edu> writes:

> Also obviously, it cannot be the case that TiVos are simply
> dying in 3-6 months, or TiVo wouldn't be in business any more.

I suspect that you are unlucky. TiVos do have disk failues, even with
the disks shipped from the factory; digging around on any of the
message boards will show that. TiVoS are an application where a
nonzero, even high failure rate pretty much *is* acceptable - covered
with the insurance policy of a warranty - and the cost savings from
that are necessary to produce a salable product.

> Why would vendors bother to implement two different lines---one more
> reliable than the other---for the -same- physical drives, then slap
> IDE interfaces on the less-reliable line?  Why not a single line
> that then bifurcates into which controller gets put on the drive?

Because manufacturing for quality is often an issue of tolerances, and
closer tolerances mean higher costs, in tools, maintenance, and QA. So
on the manufacturing side it makes perfect sense for there to be a
quality/cost trade-off. 

As has been observed in this thread, much of the market for IDE disks
is vastly more price-sensitive than quality-sensitive.  Therefore, it
also makes sense to slap SCSI controllers on the "close-tolerance",
more expensive disks, and IDE controllers on the "loose-tolerance"
disks.

Quality costs. People are cheap. Therefore, manufacturers make cheap
stuff. The existence of a few people who aren't cheap doesn't matter -
it's an ignorably small group.

        - Nathan


