/**************************** NN CONFIGURATION *************************** * * Configuration file for nn. * * You must edit this file to reflect your local configuration * and environment. * * Before editing this file, read the licence terms in the README * file and the installation guidelines in the INSTALLATION file. * * (c) Copyright 1990, Kim F. Storm. All rights reserved. */ #define RELEASE "6.5" #include #include /************************* DATABASE CONFIGURATION *************************** * * Define NOV if you have access to .overview files in your news spool * area and you want to use them rather than run nnmaster. * If you use NNTP and your server is INN 1.4 or later with XOVER support * and is generating .overview files there, you can use NOV over NNTP. In * that case, make sure you define NNTP below as well. * * IMPORTANT NOTE! * The minute you define NOV, all bets are off regarding the * documentation! There are NUMEROUS differences! */ #define NOV /* Optional */ /*#define NOV_DIRECTORY "/usr/spool/news" /*********************** NETWORK DEPENDENT DEFINITIONS ********************** * * Define NETWORK_DATABASE if you share the database through NFS on * a network with different, non-compatible machines, e.g. SUNs and * VAXen, or SUN-3 and SUN-4, or if you are using different compilers * on the same architecture. * * In a homogenous network, you can leave it undefined for higher * performance (no data conversion is needed). * * NETWORK_DATABASE is IGNORED if you are using NOV, as it has plain * ascii files. (Thank you Geoff!) */ /* #define NETWORK_DATABASE */ /********************************** NNTP ********************************* * * Define NNTP to enable nntp support. If you are not using NNTP, * just leave the following NNTP_* definitions as they are - they * will be ignored anyway. * * With NNTP, the nnmaster still maintains a local database of * all article headers for fast access (and because NNTP does not * support nn - yet), while the articles are fetched from the * nntp server when they are read or saved. * * You may still share this database through NFS locally (see the * description of NETWORK_DATABASE above) if you don't want to * have separate nn databases on all your local systems. * * Consult the file NNTP for further information on the use of NNTP. */ #define NNTP /* * Define NNTP_SERVER to the name of a file containing the name of the * nntp server. * * It is vital that both the nnmaster and all nn users on a machine * uses the same nntp server, because the nn database is synchronized * with a specific news active file. * * If the file name does not start with a slash, it is relative to * LIB_DIRECTORY defined below. * NOTE: If you plan to use the included inews, it MUST be a full pathname */ #define NNTP_SERVER "nntp_server" /* * Define NNTP_POST if you want nn to reject attempts to post via * NNTP to a server, that disallows postings. * * You should define this, if you use the NNTP based mini-inews for * postings from NNTP clients. If you use another mechanism, that * does not involve NNTP, you should leave it undefined. */ #define NNTP_POST /* * NNTP's mini-inews seems to require that messages contain a complete * header with Message-ID, Path, and Date fields which the normal inews * generates itself. If your mini-inews requires these headers to * be present, define NNTP_MINI_INEWS_HEADER below. */ #define NNTP_MINI_INEWS_HEADER /* uses "broken" mini-inews */ /* * Define NNTP_PATH_HOSTNAME to force a specific hostname into the * Path: header generated when NNTP_MINI_INEWS_HEADER is defined. * This is useful for multi-machine sites with one mail/news gateway. * * If the string starts with a '/' it is taken as the name of a file * from which the outgoing hostname should be read (at runtime). */ /* #define NNTP_PATH_HOSTNAME "puthostnamehere" */ /***************** OPERATING SYSTEM DEPENDENT DEFINITIONS ******************* * * Include the appropriate s- file for your system below. * * If a file does not exist for your system, you can use * conf/s-template.h as a starting point for writing you own. */ #include "s-sunos5.h" /* * Define DEFAULT_PAGER as the initial value of the 'pager' variable. * nnadmin pipes shell command output though this command. */ /* #define DEFAULT_PAGER "pg -n -s" */ /* system V */ #define DEFAULT_PAGER "more" /* bsd */ /* * DEFAULT_PRINTER is the initial value of the 'printer' variable. * nn's :print command pipes text into this command. */ #define DEFAULT_PRINTER "lpr" /* System V */ /* #define DEFAULT_PRINTER "lpr -p -JNEWS" */ /* bsd */ /* * Define RESIZING to make nn understand dynamic window-resizing. * (It uses the TIOCGWINSZ ioctl found on most 4.3BSD systems) * This should be defined in the conf/s-xxxxx.h file. * * PLEASE DEFINE THIS IN YOUR conf/s-.h FILE INSTEAD!! */ /*#define RESIZING */ /* * Include file configuration. Most systems with an ANSI conformant C * compiler should have these. If you have them, you should use them! * * Again, PLEASE DEFINE THESE IN YOUR conf/s-.h FILE! * * IF YOU HAVE THESE FILES, IT IS *VERY IMPORTANT* THAT YOU INCLUDE THEM */ /* Do you have /usr/include/string.h */ /* #define HAVE_STRING_H */ /* Do you have /usr/include/unistd.h */ /* #define HAVE_UNISTD_H */ /* Do you have /usr/include/stdlib.h */ /* #define HAVE_STDLIB_H */ /* Do you have /usr/include/memory.h */ /* #define HAVE_MEMORY_H */ /* Do you have /usr/include/fcntl.h */ /* #define HAVE_FCNTL_H */ /********************** MACHINE DEPENDENT DEFINITIONS ********************** * * Include the appropriate m- file for your system below. * * If a file does not exist for your system, you can use * conf/m-template.h as a starting point for writing you own. */ #include "m-sparc.h" /***************************** OWNERSHIP *************************** * * Specify owner and group for installed files and programs. * * The nnmaster will run suid/sgid to this owner and group. * * The only requirements are that the ownership allows the * nnmaster to READ the news related files and directories, and * the ordinary users to read the database and execute the nn* * programs. * * Common choices are: (news, news) and (your uid, your gid) */ #define OWNER "jhawk" #define GROUP "gsipbbin" /**************************** LOCALIZATION **************************** * * Specify where programs and files are installed. * * BIN_DIRECTORY - the location of the user programs (mandatory) * * LIB_DIRECTORY - the location of auxiliary programs and files. * (mandatory UNLESS ALL of the following are defined). * * MASTER_DIRECTORY - the location of the master program (on server) * (= LIB_DIRECTORY if undefined) * * CLIENT_DIRECTORY - the location of auxiliary programs (on clients) * (= LIB_DIRECTORY if undefined) * * HELP_DIRECTORY - the location of help files, online manual, etc. * (= CLIENT_DIRECTORY/help if undefined) * * CACHE_DIRECTORY - if NNTP is used, nn uses this central directory * to store working copies of articles on the local * system. If not defined, it stores the articles * in each user's ~/.nn directory. * * TMP_DIRECTORY - temporary file storage. Overriden by $TMPDIR. * (= /usr/tmp if undefined). * * LOG_FILE - the location of nn's log file. * (= LIB_DIRECTORY/Log if undefined). */ #define BIN_DIRECTORY "/mit/sipb/bin" #define LIB_DIRECTORY "/mit/sipb/lib/nn" /**************************** DATABASE LOCATION ************************** * * Specify where the nn database should be installed. * * If none of the following symbols are defined, the database will * be contained in the NEWS_DIRECTORY in a separate .nn directory for * master files and in files named .nnx and .nnd in each group's * spool directory. To use this scheme, the OWNER specified above * must have write permission on the news spool directories. * * If you access news via NNTP, you will probably always have to * give the database directory explicitly through DB_DIRECTORY * (and DB_DATA_DIRECTORY), since the normal news spool directories * are probably not available on the local system. * The exception may be if nnmaster runs directly on the nntp server. * * To change the default behaviour, you can define the following * symbols: * * DB_DIRECTORY - the directory containing the master files. * * DB_DATA_DIRECTORY - the directory containing the per-group files * (default is DB_DIRECTORY/DATA if undefined). * * DB_LONG_NAMES - use group's name rather than number when * building file names in DB_DATA_DIRECTORY. * (The file system must support long file names!!) */ /*#define DB_DIRECTORY "/usr/spool/nn" /*************************** NEWS TRANSPORT ************************** * * Specify the location of your news programs and files * You only need to specify these if you are not * satisfied with the default settings. * * NEWS_DIRECTORY - The news spool directory. * Default: /usr/spool/news * * NEWS_LIB_DIRECTORY - The news lib directory. * Default: /usr/lib/news * * INEWS_PATH - The location of the inews program. * Default: NEWS_LIB_DIR/inews * * RMGROUP_PATH - The location of the rmgroup program. * Default: NEWS_LIB_DIR/{rm,del}group */ /*#define NEWS_DIRECTORY "/usr/spool/news" /*#define NEWS_LIB_DIRECTORY "/usr/lib/news" /* #define INEWS_PATH "/usr/lib/news/inews" */ /* * If no "Lines:" header field is present, NN can be made to * count them itself. */ /*#define DONT_COUNT_LINES 1 */ /*************************** MAIL INTERFACE ************************* * * Specify a mailer that accepts a letter WITH a header IN THE TEXT. * * A program named 'recmail' program is normally delivered with * the Bnews system, or you can use sendmail -t if you have it. * * The contrib/ directory contains two programs which you might * be able to use with a little tweaking. */ /* #define REC_MAIL "/usr/lib/news/recmail" */ /* non-sendmail */ #define REC_MAIL "/usr/lib/sendmail -t" /* sendmail */ /* * Define HAVE_ROUTING if your mailer understands domain based * adresses (...@...) and performs the necessary rerouting (e.g. * Sendmail or Smail). * * Otherwise, nn will provide a simple routing facility using * routing information specified in the file LIB_DIRECTORY/routes. */ #define HAVE_ROUTING /* */ /* * If HAVE_ROUTING is NOT defined, nn needs to know the name of * your host. To obtain the host name it will use either of the * 'uname' or 'gethostname' system calls as specified in the s- * file included above. * * If neither 'uname' nor 'gethostname' is available, you must * define HOSTNAME to be the name of your host. Otherwise, leave * it undefined (it will not be used anyway). */ /* #define HOSTNAME "myhost" */ /* Not used if HAVE_ROUTING */ /* * Define APPEND_SIGNATURE if you want nn to ask users to append * ~/.signature to mail messages (reply/forward/mail). * * If the mailer defined in REC_MAIL automatically includes .signature * you should not define this (it will fool people to include it twice). * * I think 'recmail' includes .signature, but 'sendmail -t' doesn't. */ /*#define APPEND_SIGNATURE /* */ /* * BUG_REPORT_ADDRESS is the initial value of the bug-report-address * variable which is used by the :bug command to report bugs in * the nn software. * This address is currently set up as a mailing list, and it is * intended that it will point to the current maintainer. */ #define BUG_REPORT_ADDRESS "bug-sipb@mit.edu" /*************************** DOCUMENTATION *************************** * * Specify directories for the user and system manuals * * Adapt this to your local standards; the manuals will be named * $(MAN_DIR)/program.$(MAN_SECTION) * * USER_MAN - nn, nntidy, nngrep, etc. * SYS_MAN - nnadmin * DAEMON_MAN - nnmaster */ #define USER_MAN_DIR "/mit/sipb/man/man1" #define USER_MAN_SECTION "1" #define SYS_MAN_DIR "/mit/sipb/man/man1" #define SYS_MAN_SECTION "1m" #define DAEMON_MAN_DIR "/mit/sipb/man/man8" #define DAEMON_MAN_SECTION "8" /************************** LOCAL POLICY ***************************** * * Define STATISTICS if you want to keep a record of how much * time the users spend on news reading. * * Sessions shorter than the specified number of minutes are not * recorded (don't clutter up the log file). * * Usage statistics is entered into the $LOG_FILE with code U */ /* #define STATISTICS 5 */ /* minutes */ /* * Define ACCOUNTING if you want to keep accumulated accounting * based on the statistics in a separate 'acct' file. In this * case, the accounting figures will be secret, and not be * written to the Log file. And the users will not be able to * "decrease" their own account. * * See account.c for optional cost calculation parameters. */ /* #define ACCOUNTING */ /* * Define AUTHORIZE if you want to restrict the use of nn to * certain users or certain periods of the day. Define both * this and ACCOUNTING if you want to impose a usage quota * * See account.c for implementing various access policies. */ /* #define AUTHORIZE */ /* * Default folder directory */ #define FOLDER_DIRECTORY "~/News" /* * Max length of authors name (in "edited" format). * Also size of "Name" field on the article menus. * You may want to increase this if your terminals are wider than * 80 columns. */ #define NAME_LENGTH 80 /* * Does your 'inews' program run immediately, or does it defer? * If you have C-News, it can take minutes to find out if a post * was accepted, whereas with INN, it only takes seconds. */ #define INEWS_IS_FAST /* comment out for C-News */ /* * Synchronous posting: If set this will cause NN to wait until a * post or mail is *actually* finished. If you want to NN's * "Article posted" message to be *accurate*, then define this. * Warning: Do NOT define this if you are using C-News, or you will * have to wait 60 seconds or more to find out if the post has been * accepted. You probably want this if you are using INN or posting * via some sort of NNTP. */ #define SYNCHRONOUS_POSTING /* comment out for C-News */ /* * PUT_TIMESTAMP_IN_SCRIPTS * Defining this causes the "inst" script to add identifying information * to the beginning of the shell scripts. */ #define PUT_TIMESTAMP_IN_SCRIPTS /* * CONFIG_NUM_IN_VERSION * Defining this will make NN announce itself including the build number * like "NN version 6.5.xx #12", rather than "NN version 6.5.xx". */ #define CONFIG_NUM_IN_VERSION /* * NO_X_NEWSREADER * Define this to disable the "X-Newsreader: " header in posts and mail * Son-of-RFC1036 is rumoured to discourage this. */ #define NO_X_NEWSREADER /* * ART_GREP * Define this if you want to enable the "experimental" subject * body search code. On the "G" menu, there will be two extra * choices: "b" body search unread, and "B" body search all. * Choose your pattern, and you will be presented with a merged group * containing the articles you chose. There may still be bugs! * WARNING: * THIS WOULD BE *BAD* FOR NNTP SITES! You don't want all your * users downloading the entire news database... */ #define ART_GREP /************************ CONFIGURATION COMPLETED ************************/ #include "global.h"