#	$NetBSD: CAYMAN,v 1.18 2005/02/26 21:16:43 scw Exp $

#
# Config file for SuperH "CAYMAN" SH-5 Evaluation board
#

include 	"arch/evbsh5/conf/std.evbsh5.el"

maxusers	8

options 	INCLUDE_CONFIG_FILE
options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

#ident		"CAYMAN-$Revision: 1.18 $"

# Uncomment this to build a 64-bit kernel
#makeoptions 	SH5_ABI=64

#makeoptions	DEFCOPTS="-g"
#makeoptions	DEBUG="-g"
options 	SYMTAB_SPACE=0x40000

options 	DIAGNOSTIC
options 	DEBUG
options 	DDB
#options 	PORTMASTER
#options 	UVMHIST
#options 	UVMHIST_PRINT

options 	COMPAT_16
options 	COMPAT_20
options 	COMPAT_BSDPTY

options 	KTRACE		# system call tracing via ktrace(1)
options 	SYSTRACE	# system call vetting via systrace(1)

options 	SYSVMSG
options 	SYSVSEM
options 	SYSVSHM

file-system 	FFS
file-system 	NFS
file-system 	KERNFS
file-system 	MFS

options 	SOFTDEP
options 	FFS_NO_SNAPSHOT	# No FFS snapshots

options 	INET
options 	INET6

config netbsd	root on ? type ?

options 	NFS_BOOT_DHCP

pseudo-device	loop
pseudo-device	bpfilter
pseudo-device	pty
pseudo-device	rnd
#pseudo-device	fss			4	# file system snapshot device

# The mainbus to which all devices attach
mainbus0	at root

#
# The SuperHyway bus is the main interconnect between the constituent
# "modules" which make up an SH-5 system
#
superhyway0	at mainbus0

#
# These are the "modules" present on the Cayman's SH-5
#
cpu0		at superhyway0 pport 0x0d	# A single CPU
#emi0		at superhyway0 pport 0x80	# The memory controller module
pbridge0	at superhyway0 pport 0x09	# Peripheral Bridge
#dmac0		at superhyway0 pport 0x0e	# DMA controller
femi0		at superhyway0 pport 0x08	# Flash/External memory
sh5pci0		at superhyway0 pport 0x40	# PCI bus

#
# The Peripheral Bridge and all its sub-devices are actually on the same
# silicon as the CPU itself.
#
cprc0		at pbridge0			# Clock, Power & Reset Control
intc0		at pbridge0			# Interrupt controller
options 	SH5_INTC_IRL_MODE_INDEP		# Independent IRL[0-3] inputs

tmu0		at pbridge0 ipl 14 intevt 0x400	# Timer
scif0		at pbridge0 ipl 12 intevt 0x700	# On-chip serial controller
rtc0		at pbridge0			# Battery-backed Date/Time chip

#
# The Clock, Power and Reset controller has a number of sub-devices, only one
# of which is currently used.
#
clock0		at cprc0			# Primary clock generator
#watchdog0 	at cprc0			# Watchdog
#power0 	at cprc0			# Power Management
#reset0 	at cprc0			# Reset controller

#
# The FEMI module (which hangs off the SuperHyway) is actually more than
# just an interface to Flash memory. It's pretty much a complete expansion
# bus in its own right.
#
sysfpga0	at femi0 offset 0x4000000	# The main System FPGA chip

#
# PCIbus devices
#
options 	PCI_NETBSD_CONFIGURE
pci*		at sh5pci? bus ?		# pci at SH5 PCI bridge
pci*		at pcibus? bus ?		# pci at PCIbus bridges
pci*		at ppb? bus ?			# pci at PCI-PCI bridges
ppb*		at pci? dev ? function ?	# PCI-PCI Bridges

# Ensoniq card on the Cayman
eap*		at pci? dev ? function ?	# Ensoniq AudioPCI

# Audio support
audio*		at audiobus?

# PCI Network Interfaces
ex*		at pci? dev ? function ?	# 3Com 90x[BC]
gsip*		at pci? dev ? function ?	# NS83820 Gigabit Ethernet
options 	NMBCLUSTERS=8192

# PCI SCSI Interfaces
ahc*		at pci? dev ? function ?	# Adaptec 7850 SCSI Controller

#
# The Super I/O chip is straight out of the x86 PeeCee world in that
# it implements a bunch if "standard" PeeCee type devices (although
# a few of those are not connected on Cayman).
#
# We make it look like a PeeCee isa bus so that we can re-use all the
# pre-existing NetBSD drivers for the devices implemented in the Super IO.
#
superio0	at sysfpga0			# SMC Super I/O Device
isa0		at superio0			# The ISAbus attachment.

# Onboard SMC91C100 LAN controller
sm0		at sysfpga0

# The Alpha Numeric LED display on the Cayman
alphaled0	at sysfpga0

#
# These are the devices Cayman uses
#
# Note that the addresses and irqs are hard-coded and should really be
# moved into a `knowndevs' structure ...
#
#pckbc0	at isa0					# Keyboard Controller
#pms0	at pckbc0				# Mouse
com0	at isa0 port 0x3f8 irq 4		# PC-style serial ports
com1	at isa0 port 0x2f8 irq 3
lpt0	at isa0 port 0x378 irq 7		# Parallel printer port
#wdc0	at isa0 port 0x1f0 irq 14 flags 0x0	# IDE-style disk controller

# Support for IDE/ATAPI device
#wd*		at wdc0 channel ? drive ? flags 0x0000
#atapibus*	at wdc0 channel ?
#cd*		at atapibus? drive ? flags 0x0000

# The PHY device on the onboard LAN controller
sqphy*	at mii? phy ?

# The PHY on the gsip
gphyter* at mii? phy ?			# NS83861 Gig-E PHY

#
# The DTF debug interface.
#
#dtfcons0	at mainbus0

#
# Generic SCSI bus
#
scsibus*	at scsi?
sd*		at scsibus? target ? lun ?