# Generated automatically from Makefile.in by configure. # Makefile.in generated automatically by automake 1.4 from Makefile.am # Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # Top-level Makefile.am for SASL # Rob Earhart # ################################################################ # Copyright (c) 2000 Carnegie Mellon University. All rights reserved. # # Redistribution and use in source and binary forms, with or without # modification, are permitted provided that the following conditions # are met: # # 1. Redistributions of source code must retain the above copyright # notice, this list of conditions and the following disclaimer. # # 2. Redistributions in binary form must reproduce the above copyright # notice, this list of conditions and the following disclaimer in # the documentation and/or other materials provided with the # distribution. # # 3. The name "Carnegie Mellon University" must not be used to # endorse or promote products derived from this software without # prior written permission. For permission or any other legal # details, please contact # Office of Technology Transfer # Carnegie Mellon University # 5000 Forbes Avenue # Pittsburgh, PA 15213-3890 # (412) 268-4387, fax: (412) 268-7395 # tech-transfer@andrew.cmu.edu # # 4. Redistributions of any form whatsoever must retain the following # acknowledgment: # "This product includes software developed by Computing Services # at Carnegie Mellon University (http://www.cmu.edu/computing/)." # # CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO # THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY # AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE # FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES # WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN # AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING # OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. # ################################################################ SHELL = /bin/sh srcdir = . top_srcdir = . prefix = /usr/local exec_prefix = ${prefix} bindir = ${exec_prefix}/bin sbindir = ${exec_prefix}/sbin libexecdir = ${exec_prefix}/libexec datadir = ${prefix}/share sysconfdir = ${prefix}/etc sharedstatedir = ${prefix}/com localstatedir = ${prefix}/var libdir = ${exec_prefix}/lib infodir = ${prefix}/info mandir = ${prefix}/man includedir = ${prefix}/include oldincludedir = /usr/include DESTDIR = pkgdatadir = $(datadir)/cyrus-sasl pkglibdir = $(libdir)/cyrus-sasl pkgincludedir = $(includedir)/cyrus-sasl top_builddir = . ACLOCAL = aclocal -I $(top_srcdir)/cmulocal -I $(top_srcdir)/config AUTOCONF = autoconf AUTOMAKE = automake AUTOHEADER = autoheader INSTALL = /usr/athena/bin/install -c INSTALL_PROGRAM = ${INSTALL} $(AM_INSTALL_PROGRAM_FLAGS) INSTALL_DATA = ${INSTALL} -m 644 INSTALL_SCRIPT = ${INSTALL_PROGRAM} transform = s,x,x, NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_alias = sparc-sun-solaris2.8 host_triplet = sparc-sun-solaris2.8 AS = @AS@ AWK = gawk CC = gcc CPP = gcc -E DIRS = DLLTOOL = @DLLTOOL@ DMALLOC_LIBS = DYNSASLFLAGS = @DYNSASLFLAGS@ GETADDRINFOOBJS = GETNAMEINFOOBJS = GETSUBOPT = GSSAPIBASE_LIBS = -L/usr/athena/lib -lgssapi_krb5 -lkrb5 -lk5crypto -lcom_err -lresolv GSSAPI_LIBS = IPCTYPE = unix JAVAC = true JAVADOC = true JAVAH = true JAVAROOT = JAVA_INCLUDES = LIBOBJS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIB_CRYPT = LIB_DES = LIB_DYN_SASL = @LIB_DYN_SASL@ LIB_MYSQL = LIB_PAM = -lpam LIB_SASL = @LIB_SASL@ LIB_SOCKET = -lresolv -lsocket -lnsl LN_S = ln -s LTGETADDRINFOOBJS = LTGETNAMEINFOOBJS = LTLIBOBJS = LTSNPRINTFOBJS = MAKEINFO = makeinfo NM = /usr/ccs/bin/nm -p OBJDUMP = @OBJDUMP@ OTP_LIBS = -lcrypto ../sasldb/libsasldb.la $(SASL_DB_LIB) PACKAGE = cyrus-sasl PLAIN_LIBS = PURECOV = PURIFY = PWCHECKMETH = RANLIB = ranlib SASLFLAGS = @SASLFLAGS@ SASL_DB_BACKEND = db_ndbm.lo SASL_DB_BACKEND_STATIC = ../sasldb/db_ndbm.o ../sasldb/allockey.o SASL_DB_INC = SASL_DB_LIB = SASL_DB_MANS = saslpasswd2.8 sasldblistusers2.8 SASL_DB_UTILS = saslpasswd2 sasldblistusers2 SASL_DL_LIB = -ldl SASL_KRB_LIB = SASL_MECHS = libsasldb.la libcrammd5.la libdigestmd5.la libotp.la libgssapiv2.la libplain.la libanonymous.la SASL_STATIC_LIBS = SASL_STATIC_OBJS = ../plugins/sasldb.o ../plugins/cram.o ../plugins/digestmd5.o ../plugins/otp.o ../plugins/gssapi.o ../plugins/plain.o ../plugins/anonymous.o ../plugins/plugin_common.o SASL_UTIL_HEADERS_EXTRA = SASL_UTIL_LIBS_EXTRA = SFIO_INC_FLAGS = SFIO_LIB_FLAGS = SMTPTEST_PROGRAM = SNPRINTFOBJS = SRP_LIBS = VERSION = 2.1.7 plugindir = /usr/lib/sasl2 SAD = saslauthd #SAD = #PWC = pwcheck PWC = SAM = sample #SAM = #JAV = java JAV = #INSTALLOSX = install-exec-local-osx INSTALLOSX = SUBDIRS = include sasldb plugins lib utils doc man $(PWC) $(SAM) $(JAV) $(SAD) EXTRA_DIST = config cmulocal win32 mac dlcompat-20010505 framedir = /Library/Frameworks/SASL2.framework ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ Makefile.am Makefile.in NEWS acconfig.h aclocal.m4 config.h.in \ configure configure.in DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) TAR = gtar GZIP_ENV = --best DIST_SUBDIRS = include sasldb plugins lib utils doc man pwcheck sample \ java saslauthd all: all-redirect .SUFFIXES: $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status $(ACLOCAL_M4): configure.in cd $(srcdir) && $(ACLOCAL) config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) config.h: stamp-h @if test ! -f $@; then \ rm -f stamp-h; \ $(MAKE) stamp-h; \ else :; fi stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES= CONFIG_HEADERS=config.h \ $(SHELL) ./config.status @echo timestamp > stamp-h 2> /dev/null $(srcdir)/config.h.in: $(srcdir)/stamp-h.in @if test ! -f $@; then \ rm -f $(srcdir)/stamp-h.in; \ $(MAKE) $(srcdir)/stamp-h.in; \ else :; fi $(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h cd $(top_srcdir) && $(AUTOHEADER) @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null mostlyclean-hdr: clean-hdr: distclean-hdr: -rm -f config.h maintainer-clean-hdr: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive info-recursive dvi-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $(MAKEFLAGS); amf=$$2; \ dot_seen=no; \ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ rev="$$subdir $$rev"; \ test "$$subdir" = "." && dot_seen=yes; \ done; \ test "$$dot_seen" = "no" && rev=". $$rev"; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ here=`pwd` && cd $(srcdir) \ && mkid -f$$here/ID $$unique $(LISP) TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) tags=; \ here=`pwd`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS)'; \ unique=`for i in $$list; do echo $$i; done | \ awk ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS) mostlyclean-tags: clean-tags: distclean-tags: -rm -f TAGS ID maintainer-clean-tags: distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist -rm -rf $(distdir) GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz mkdir $(distdir)/=build mkdir $(distdir)/=inst dc_install_base=`cd $(distdir)/=inst && pwd`; \ cd $(distdir)/=build \ && ../configure --srcdir=.. --prefix=$$dc_install_base \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) dist -rm -rf $(distdir) @banner="$(distdir).tar.gz is ready for distribution"; \ dashes=`echo "$$banner" | sed s/./=/g`; \ echo "$$dashes"; \ echo "$$banner"; \ echo "$$dashes" dist: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) dist-all: distdir -chmod -R a+r $(distdir) GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) -rm -rf $(distdir) distdir: $(DISTFILES) -rm -rf $(distdir) mkdir $(distdir) -chmod 777 $(distdir) @for file in $(DISTFILES); do \ d=$(srcdir); \ if test -d $$d/$$file; then \ cp -pr $$d/$$file $(distdir)/$$file; \ else \ test -f $(distdir)/$$file \ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ || cp -p $$d/$$file $(distdir)/$$file || :; \ fi; \ done for subdir in $(DIST_SUBDIRS); do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ chmod 777 $(distdir)/$$subdir; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook info-am: info: info-recursive dvi-am: dvi: dvi-recursive check-am: all-am check: check-recursive installcheck-am: installcheck: installcheck-recursive all-recursive-am: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive install-exec-am: install-exec-local install-exec: install-exec-recursive install-data-am: install-data: install-data-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am install: install-recursive uninstall-am: uninstall: uninstall-recursive all-am: Makefile config.h all-redirect: all-recursive-am install-strip: $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install installdirs: installdirs-recursive installdirs-am: mostlyclean-generic: clean-generic: distclean-generic: -rm -f Makefile $(CONFIG_CLEAN_FILES) -rm -f config.cache config.log stamp-h stamp-h[0-9]* maintainer-clean-generic: mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-recursive clean-am: clean-hdr clean-tags clean-generic mostlyclean-am clean: clean-recursive distclean-am: distclean-hdr distclean-tags distclean-generic clean-am -rm -f libtool distclean: distclean-recursive -rm -f config.status maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." maintainer-clean: maintainer-clean-recursive -rm -f config.status .PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ install-data-recursive uninstall-data-recursive install-exec-recursive \ uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ all-recursive check-recursive installcheck-recursive info-recursive \ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ install-exec-local install-exec-am install-exec install-data-am \ install-data install-am install uninstall-am uninstall all-redirect \ all-am all installdirs-am installdirs mostlyclean-generic \ distclean-generic clean-generic maintainer-clean-generic clean \ mostlyclean distclean maintainer-clean dist-hook: @find $(distdir) -name CVS -print | xargs -t rm -rf install-exec-local: $(INSTALLOSX) @if test "$(plugindir)" != "$(prefix)/lib/sasl2"; then \ echo "********************************************************"; \ echo "* WARNING:"; \ echo "* Plugins are being installed into $(prefix)/lib/sasl2,"; \ echo "* but the library will look for them in $(plugindir)."; \ echo "* You need to make sure that the plugins will eventually"; \ echo "* be in $(plugindir) -- the easiest way is to make a"; \ echo "* symbolic link from $(plugindir) to $(prefix)/lib/sasl2,"; \ echo "* but this may not be appropriate for your site, so this"; \ echo "* installation procedure won't do it for you."; \ echo "*"; \ echo "* If you don't want to do this for some reason, you can"; \ echo "* set the location where the library will look for plugins"; \ echo "* by setting the environment variable SASL_PATH to the path"; \ echo "* the library should use."; \ echo "********************************************************"; \ fi install-exec-local-osx: $(mkinstalldirs) $(framedir)/Versions/A/Headers $(mkinstalldirs) $(framedir)/Versions/A/Resources cd $(framedir)/Versions ; ln -fs A Current cd $(framedir) ; ln -fs Versions/A/Headers . cd $(framedir) ; ln -fs Versions/A/Resources . $(INSTALL_DATA) $(srcdir)/config/Info.plist $(framedir)/Versions/A/Resources # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: