# 6to4.conf
# Configuration file for 6to4 tunnel
#

$in_if="";				# Inside (usually ethernet) interface - for local network

$v6_net="1";			# 2002:x:x:v6_net::
$v6_innernet="2";		# 2002:x:x:v6_innernet::
$v6_prefixlen=16;		# Change for more
$hostbits6=":1";		# should be determined via MAC of $in_if

# Possible remote 6to4 routers:
# Anycast is default per RFC 3068, but can select another if desired

$peer="6to4-anycast";					# RFC 3068 magic value
#$peer="6to4.ipv6.fh-regensburg.de";	# Germany, Europe
#$peer="asterix.ipv6.bt.com";			# Great Britain, Europe
#$peer="6to4.kfu.com";					# USA, West coast
#$peer="6to4.ipv6.microsoft.com";		# USA, West coast
#$peer="ipv6-router.cisco.com";			# USA, West coast; register at http://www.cisco.com/ipv6/
