!  GV Teleport 33.6 for ARA 2.1 - 9/5/96, DEJ
!  Copyright: © 1991-1997 Global Village Communication, Inc.     All Rights Reserved.
! 
!	Portions Authored by: Kris Kreutzman
!	Portions Copyright:	© 1991-1996 Apple Computer, Inc.	All Rights Reserved.
!
!	revision history:
!	1.0.7 06/24/97 GAS		Modified init and hang up code to fix ARAP callbacks
!	1.0.6 06/13/97 GAS		Modified hangup code
!   1.0.5 03/12/97 GAS		Updated code to support K56Flex speeds
!	1.0.4 01/31/97 RHY		Removed the \^ from diaing strings to turn off data
!							calling tones.
! 	1.0.3 11/15/96 DEJ 		Added fix for problem when "Ring through modem" is on and 
!							making ARA connection.
!   1.0.1 09/05/96 DEJ  	Generated basic Apple/Kris Kreutzman script w/MSG 1.0a1.
!		                    Integrated earlier/cleaner answer & hangup (rhoiberg),
!                           Platinum mods (SAP), Fax/ARA discrimination (crw), Int'l 
!                           Blacklisting & blind dialing (DEJ), 31.2k & 33.6k (gas).
! 
!  'mlts' resource info for this modem:
!    byte 1 == 01 -> modem HAS built-in error correction protocols
!    byte 2 == 01 -> modem HAS built-in data compression protocols
!    byte 3 == 40 -> max number of chars (hex 28) in varstr 7
!    byte 4 == 40 -> max number of chars (hex 28) in varstr 8
!    byte 5 == 40 -> max number of chars (hex 28) in varstr 9
!	
@ORIGINATE
@ANSWER
! 
! ---- Initial modem setup ----
! 
! 
! In originate mode, set serial port speed depending upon the compression flag
!	A higher rate with compression on (PPP) to handle expanded data from the modem
!	A lower rate closer to the DCE when compression is off (ARA)
! 
ifstr 5 1 "0"
serreset 115200, 0, 8, 1
jump 2
!
@LABEL 1
serreset 57600, 0, 8, 1
!
@LABEL 2
hsreset 0 0 0 0 0 0
settries 0
!
! Get the modem's attention
!
matchclr
matchstr 1 3 "OK\13\10"
write "AT\13"
matchread 60
pause 90
!
@LABEL 3
! 
! Setup the modem for the following:
!   AT         Attention
!   &F1        Reset to factory settings
!              Standard compression/reliablity
!              Lock serial port speed
!              Serial port hardware handshaking, turn off software handshaking
!   E0         Turn off AT command mode echo
!   W2         CONNECT returns DCE speed
!   S95=45     Verbose responses and compression/protocol results
!   S0=0       Turn off answering
!   &D3        Reset or return to command mode on DTR toggle (optional)
!   S7=60      Allow 60 seconds for calls to complete
!
matchclr
matchstr 1 4   "OK\13\10"
matchstr 2 101 "ERROR\13\10"
write "AT&F1E0W2S95=45S0=0&D3S7=60\13"
matchread 90
inctries
iftries 3 101
!
! Reset the Modem on setup failure
!
DTRClear
pause 5
DTRSet
flush
pause 90
jump 3
!
!
@LABEL 4
! 
! Modem now responding and configured for full EC/DC functions.
! 
! Varstring 4 , reliable link protocol:
!    = 0, handled by computer (ARAP)
!    = 1, handled by modem (PPP)
!    = 2, MNP10 protocol (Cellular protocol, no longer supported)
! 
! If PPP or Cellular mode, jump to 5, otherwise (ARA) disable EC/DC.
! 
ifstr 4 5 "1"
ifstr 4 5 "2"
!
! Varstring 4 == 0, turn off reliable link protocol in modem (ARAP)
! 
matchclr
matchstr 1 9 "OK\13\10"
write "AT\\N0\13"
matchread 30
jump 101
!
!
@LABEL 5
! 
! This is where MNP10 (or MNP10EC) could go, if/when we support that.
! 
! Standard EC/DC is still on.  Decide whether to turn off DC.
! Varstring 5, compression protocol:
!    = 0, handled by computer 
!    = 1, handled by modem
! 
ifstr 5 9 "1"
!
! Varstring 5 == 0, turn off compression protocol in modem.
matchclr
matchstr 1 9 "OK\13\10"
write "AT%C0\13"
matchread 30
jump 101
!
!
@LABEL 9
! 
! If speaker on flag is true, jump to 13.  Otherwise, turn the speaker off.
! 
! Varstring 2, modem speaker:
!    = 0, speaker off
!    = 1, speaker on
! 
ifstr 2 13 "1"
pause 5
matchclr
matchstr 1 13 "OK\13\10"
write "ATM0\13"
matchread 30
jump 101
!
! Modem ready, wait for a call or originate a call
!
@LABEL 13
! 
! 
ifANSWER 32
!
!
! ---- Originating a call ----
! 
! For normal dialing, jump to 19.  Otherwise, manual dial jumps to 15, blind dial
!    jumps to 17.
! 
! Varstring 6, dialing mode:
!    = 0, normal dialing
!    = 1, blind dialing
!    = 2, manual dialing
ifstr 6 17 "1"
ifstr 6 15 "2"
jump 19
!
@LABEL 15
! 
! Display ASK dialog with message.  Goto label 107 if dialog canceled.
! 
ASK 2 "Pick up the phone & dial ^1.  Hit OK when the phone rings, then hangup." 107
note "Manual dialing initiated" 3
! 
! X1S6=4 to ignore dialtone 4 seconds, & ignore busy, D to dial, \^ generates data tone
write "ATX1S6=4D\13"
jump 32
!
@LABEL 17
note "Dialing without tone" 3
matchclr
matchstr 1 19 "OK\13\10"
! X1S6=4 to ignore dialtone 4 seconds, & ignore busy for blind dialing.
write "ATX1S6=4\13"
matchread 30
jump 101
!
!
@LABEL 19
! 
! This is where we break up long dialstrings
! 
! Display the full dialstring contained in Varstring 1
note "Dialing ^1" 3
!
! Varstrings 7, 8 and 9, contain dialstring fragments
!    Long phone numbers may have been split into smaller groups
!    so that the modem can use them
! Check to see whether these fragments exist.  If they do, dial them one at a time.
! If not, jump ahead and dial the remaining phone number.  Use the data tone.
! 
! Varstring 3:  "p" for pulse & "t" for tone dialing
! Varstring 8 == blank (dialstring in varstring 7)
! Varstring 9 == blank (dialstring in varstrings 7 & 8)
! Otherwise (dialstring in varstrings 7, 8 & 9)
! \^ is added to the dialstring to force the modem to generate a data tone
ifstr 8 27 " "
ifstr 9 24 " "
!
!  Write dialstring in varstrings 7, 8 & 9
matchclr
matchstr 1 21 "OK\13\10"
write "ATD^3^7;\13"
matchread 400
jump 101
! 
@LABEL 21
matchclr
matchstr 1 22 "OK\13\10"
write "ATD^3^8;\13"
matchread 400
jump 101
! 
@LABEL 22
write "ATD^3^9\13"
jump 32
!
!
@LABEL 24
!  Write dialstring in varstrings 7 & 8
matchclr
matchstr 1 25 "OK\13\10"
write "ATD^3^7;\13"
matchread 400
jump 101
! 
@LABEL 25
write "ATD^3^8\13"
jump 32
!
@LABEL 27
!  Write dialstring in varstring 7
write "ATD^3^7\13"
!
!
!    ---- Connection response ----
!
! The following section will parse modem responses of five types:
!   1) PROTOCOL: xxx, COMPRESSION: xxx, CONNECT xxx
!   2) CONNECT xxx/ARQ/V42
!   3) Standard incoming and outgoing call progress messages
!   4) FAX/DATA discrimination messages
!   5) International DELAYED & BLACKLISTED restrictions.
!
@LABEL 32
matchclr
matchstr  1 81  "RING\13\10"
matchstr  2 102 "NO DIALTONE\13\10"
matchstr  3 103 "NO CARRIER"
matchstr  4 103 "ERROR\13\10"
matchstr  5 104 "BUSY\13\10"
matchstr  6 105 "NO ANSWER\13\10"
matchstr  7 33  "CONNECT "
matchstr  8 32  "CARRIER"
matchstr  9 40  "CONNECT\13\10"
matchstr 10 74  "PROTOCOL: LAP"
matchstr 11 74  "PROTOCOL: MNP"
matchstr 12 74  "PROTOCOL: ALT"
matchstr 13 76  "COMPRESSION: V"
matchstr 14 76  "COMPRESSION: MNP5"
matchstr 15 76  "COMPRESSION: CLASS"
matchstr 16 110  "DELAYED  "
matchstr 17 111  "BLACKLISTED\13\10"
matchread 700
ifANSWER 32
jump 101
!
!  Parse the speed of connect result codes
!  1200, 2400 and 4800 have two entries each
!  to distinguish them from 12000, 24000 and 48000
! 
! (added 1200bps support)
!
@LABEL 33
matchclr
matchstr  1 39 "1200\13"
matchstr  2 39 "1200/"
matchstr  3 40 "2400\13"
matchstr  4 40 "2400/"
matchstr  5 41 "4800\13"
matchstr  6 41 "4800/"
matchstr  7 42 "7200"
matchstr  8 43 "9600"
matchstr  9 44 "12000"
matchstr 10 45 "14400"
matchstr 11 46 "16800"
matchstr 12 47 "19200"
matchstr 13 48 "21600"
matchstr 14 49 "24000"
matchstr 15 50 "26400"
matchstr 16 51 "28800"
matchstr 17 52 "31200"
matchstr 18 53 "32000"
matchstr 19 54 "33600"
matchstr 20 55 "34000"
matchstr 21 56 "36000"
matchstr 22 57 "38000"
matchstr 23 58 "40000"
matchstr 24 59 "42000"
matchstr 25 60 "44000"
matchstr 26 61 "46000"
matchstr 27 62 "48000"
matchstr 28 63 "50000"
matchstr 29 64 "52000"
matchstr 30 65 "54000"
matchstr 31 66 "56000"
matchread 30
jump 71
!
! -- Connection rates --
! CommunicatingAt informs ARA of the raw modem to modem
! connection speed.
!
@LABEL 39
note "Communicating at 1200 bps." 2
CommunicatingAt 1200
jump 72
!
@LABEL 40
note "Communicating at 2400 bps." 2
CommunicatingAt 2400
jump 72
!
@LABEL 41
note "Communicating at 4800 bps." 2
CommunicatingAt 4800
jump 72
!
@LABEL 42
note "Communicating at 7200 bps." 2
CommunicatingAt 7200
jump 72
!
@LABEL 43
note "Communicating at 9600 bps." 2
CommunicatingAt 9600
jump 72
!
@LABEL 44
note "Communicating at 12000 bps." 2
CommunicatingAt 12000
jump 72
!
@LABEL 45
note "Communicating at 14400 bps." 2
CommunicatingAt 14400
jump 72
!
@LABEL 46
note "Communicating at 16800 bps." 2
CommunicatingAt 16800
jump 72
!
@LABEL 47
note "Communicating at 19200 bps." 2
CommunicatingAt 19200
jump 72
!
@LABEL 48
note "Communicating at 21600 bps." 2
CommunicatingAt 21600
jump 72
!
@LABEL 49
note "Communicating at 24000 bps." 2
CommunicatingAt 24000
jump 72
!
@LABEL 50
note "Communicating at 26400 bps." 2
CommunicatingAt 26400
jump 72
!
@LABEL 51
note "Communicating at 28800 bps." 2
CommunicatingAt 28800
jump 72
!
@LABEL 52
note "Communicating at 31200 bps." 2
CommunicatingAt 31200
jump 72
!
@LABEL 53
note "Communicating at 32000 bps." 2
CommunicatingAt 32000
jump 72
!
@LABEL 54
note "Communicating at 33600 bps." 2
CommunicatingAt 33600
jump 72
!
@LABEL 55
note "Communicating at 34000 bps." 2
CommunicatingAt 34000
jump 72
!
@LABEL 56
note "Communicating at 36000 bps." 2
CommunicatingAt 36000
jump 72
!
@LABEL 57
note "Communicating at 38000 bps." 2
CommunicatingAt 38000
jump 72
!
@LABEL 58
note "Communicating at 40000 bps." 2
CommunicatingAt 40000
jump 72
!
@LABEL 59
note "Communicating at 42000 bps." 2
CommunicatingAt 42000
jump 72
!
@LABEL 60
note "Communicating at 44000 bps." 2
CommunicatingAt 44000
jump 72
!
@LABEL 61
note "Communicating at 46000 bps." 2
CommunicatingAt 46000
jump 72
!
@LABEL 62
note "Communicating at 48000 bps." 2
CommunicatingAt 48000
jump 72
!
@LABEL 63
note "Communicating at 50000 bps." 2
CommunicatingAt 50000
jump 72
!
@LABEL 64
note "Communicating at 52000 bps." 2
CommunicatingAt 52000
jump 72
!
@LABEL 65
note "Communicating at 54000 bps." 2
CommunicatingAt 54000
jump 72
!
@LABEL 66
note "Communicating at 56000 bps." 2
CommunicatingAt 56000
jump 72
!
! Labels 67-70 saved for future speed expansion
!
@LABEL 71
note "Communicating at an unknown rate." 2
jump 72
!
! Look for reliablilty and compression results 
! at the end of the connect result.
!
@LABEL 72
matchclr
matchstr  1 75 "LAPM"
matchstr  2 75 "REL"
matchstr  3 75 "ARQ"
matchstr  4 77 "COMP/"
matchstr  5 77 "COMP\13"
matchstr  6 75 "V42/"
matchstr  7 75 "V42\13"
matchstr  8 77 "V42BIS"
matchstr  9 77 "V42bis"
matchstr 10 75 "MNP\13"
matchstr 11 77 "MNP5"
matchstr 12 78 "\10"
matchread 30
jump 78
! 
! -- Modem error correction link negotiation --
! Userhook 2 informs ARA that a modem-to-modem error
! correcting protocol has been negotiated
!
!
@LABEL 74
note "Modem Reliable Link Established." 2
userhook 2
jump 32
!
@LABEL 75
note "Modem Reliable Link Established." 2
userhook 2
jump 72
!
! -- Compression negotiation --
! Userhook 3 informs ARA that a modem-to-modem compression
! protocol has been negotiated
!
@LABEL 76
note "Modem Compression Established." 2
userhook 3
jump 32
!
@LABEL 77
note "Modem Compression Established." 2
userhook 3
jump 72
!
!
! -- Normal exit after "CONNECT" --
!
!  This modem has been setup to do CTS handshaking,
!  and we assume that a CTS handshaking cable is being used.
!
@LABEL 78
! Turn on CTS handshaking.
HSReset 0 1 0 0 0 0
!
ifANSWER 79
pause 30
@LABEL 79
exit 0
!
!
! ---- Answer calls ----
!
! A RING results from the modem in ANSWERING mode
! claims the serial port and answering the phone
!
@LABEL 81
ifORIGINATE 32
userhook 1
note "Answering phone..." 2
write "ATA\13"
jump 32
!  
! ---- Hang up and reset modem ----
!
@HANGUP 
@LABEL 90 
settries 0
HSReset 0 0 0 0 0 0
!
@LABEL 91
! 
! Try to get control of the modem
! 
pause 60
write "+++"
pause 60 
matchclr
matchstr 1 96 "OK\13\10"
pause 15
write "AT\13"
matchread 30
!
@LABEL 94
! 
! Force a hangup
! 
matchclr
matchstr 1 98 "NO CARRIER\13\10"
matchstr 2 98 "OK\13\10"
matchstr 3 98 "ERROR\13\10"
matchstr 4 98 "0\13\10"
matchstr 5 98 "DELAYED"
matchstr 6 98 "BLACKLISTED"
write "ATH\13"
matchread 30
! 
! Try again to get control of the modem by toggling DTR
!
@LABEL 95
DTRClear
Pause 5
DTRSet
flush
!
!
! Try the hangup sequence three times otherwise declare an error
!
pause 120 
inctries
iftries 3 101
jump 91
!
@LABEL 96
!
! Pause between data and command mode
!
pause 50
jump 94
!
!
@LABEL 97
! 
! AT&F1 resulted in Error, try again using AT&F
! 
pause 15
matchclr
matchstr 1 99 "OK\13\10"
write "AT&FS0=0\13"
matchread 30
jump 101
!
@LABEL 98
! 
! Got control of the modem.  Recall the factory settings.  If it fails, jump 97.
! 
pause 15
matchclr
matchstr 1 99 "OK\13\10"
matchstr 2 97 "ERROR\13\10"
write "AT&F1S0=0\13"
matchread 30
jump 101
!
@LABEL 99
exit 0
! 
!
! ---- Error messages -----
!
! Modem Not Responding
@LABEL 101
exit -6019
!
! No Dial Tone
@LABEL 102
exit -6020
!
! No Carrier or Error
@LABEL 103
exit -6021
!
! Busy
@LABEL 104
exit -6022
!
! No Answer
@LABEL 105
exit -6023
!
! User Cancellation
@LABEL 107
exit -6008
!
! 
! ---- DELAYED and BLACKLISTED functions ----
! 
@LABEL 110
matchclr
matchstr  1 119 "00:00:0"
matchstr  2 118 "00:00:1"
matchstr  3 117 "00:00:2"
matchstr  4 116 "00:00:3"
matchstr  5 115 "00:00:4"
matchstr  6 114 "00:00:5"
matchstr  7 113 "00:01:"
matchstr  8 112 "00:02:"
matchread 30
! 
!  The number is 'DELAYED' more than 3 minutes.  Exit the script telling the user to wait or reset his modem.
!
exit -6019 "\13The modem responds 'DELAYED':\13(Cannot redial this number right now.)\13To try again immediately, turn modem OFF and ON before proceeding."
! 
@LABEL 111
! 
!  The number is 'BLACKLISTED'.  Exit the script, telling the user to reset his modem.
! 
exit -6019 "\13The modem responds 'BLACKLISTED':\13(Cannot redial this number again.)\13Double-check the number, then turn your modem OFF and ON before proceeding."
!
@LABEL 112
note "'DELAYED'. Redialing in 3 minutes..."
pause 600
@LABEL 113
note "'DELAYED'. Redialing in 2 minutes..."
pause 600
@LABEL 114
note "'DELAYED'. Redialing in 1 minute... "
pause 100
@LABEL 115
note "'DELAYED'. Redialing in 50 seconds..."
pause 100
@LABEL 116
note "'DELAYED'. Redialing in 40 seconds..."
pause 100
@LABEL 117
note "'DELAYED'. Redialing in 30 seconds..."
pause 100
@LABEL 118
note "'DELAYED'. Redialing in 20 seconds..."
pause 100
@LABEL 119
note "'DELAYED'. Redialing in 10 seconds..."
pause 100
jump 1
! 
! 
! Labels 121-128 are reserved for emergency hacks.
!