/* config.h.in. Generated automatically from configure.in by autoheader. */ /****** BEGIN USER CONFIGURATION SECTION *****/ /* * IMPORTANT: UNCOMMENT THE DEFINES FOR YOUR OPERATING SYSTEM * * These are slowly being phased out, but currently * not everyone is auto-configured. Then decide if you * wish to change the features that are compiled into nmh. */ /* * Solaris 2.x * Irix * OSF/1 * HP-UX * AIX */ /* #define SYS5 1 */ /* #define SVR4 1 */ /* * SunOS 4.1.x */ /* #define BIND 1 */ /* #define BSD42 1 */ /* * Linux */ /* #define LINUX_STDIO 1 */ /* * FreeBSD 2.x * NetBSD 1.x, * OpenBSD 2.x * BSD/OS 2.x */ /* #define BIND 1 */ /* #define BSD42 1 */ /* #define BSD44 1 */ /* * SCO 4.x * SCO 5.x * * I believe the second `define' is only necessary * for SCO 5.x, not SCO 4.x */ /* #define SYS5 1 */ /* #define SCO_5_STDIO 1 */ /* * Define to 1 if you need to make `inc' set-group-id * because your mail spool is not world writable. This * will add some extra security checks, although I can't * guarantee it is safe. Also, you will need to change the * group and add the setgid bit to `inc' manually after * installation. */ /* #define MAILGROUP 1 */ /* * Turn on locale (setlocale) support */ #define LOCALE 1 /* * Define to 1 the type of file locking to use. You need to * make sure the type of locking you use is compatible with * other programs which may modify your maildrops. * Currently you can only use one type. */ #define DOT_LOCKING 1 /* #define FCNTL_LOCKING 1 */ /* #define LOCKF_LOCKING 1 */ /* #define FLOCK_LOCKING 1 */ /* * If you have defined DOT_LOCKING, then the default is to * place the lock files in the same directory as the file that * is to be locked. Alternately, if you define LOCKDIR, you * can specify that all lock files go in a specific directory. * Don't define this unless you know you need it. */ /* #define LOCKDIR "/usr/spool/locks" */ /* * Define this if your passwords are stored in some type of * distributed name service, such as NIS, or NIS+. */ #define DBMPWD 1 /* * Directs nmh not to try and rewrite addresses * to their official form. You probably don't * want to change this without good reason. */ #define DUMB 1 /* * Define this if you do not want nmh to attach the local hostname * to local addresses. You must also define DUMB. You probably * dont' need this unless you are behind a firewall. */ #define REALLYDUMB 1 /* * Directs inc/slocal to extract the envelope sender from "From " * line. If inc/slocal is saving message to folder, then this * sender information is then used to create a Return-Path * header which is then added to the message. */ #define RPATHS 1 /* * If defined, slocal will use `mbox' format when saving to * your standard mail spool. If not defined, it will use * mmdf format. */ #define SLOCAL_MBOX 1 /* * If this is defined, nmh will recognize the ~ construct. */ #define MHRC 1 /* * Compile simple ftp client into mhn. This will be used by mhn * for ftp access unless you have specified another access method * in your .mh_profile or mhn.defaults. Use the "mhn-access-ftp" * profile entry to override this. Check mhn(1) man page for * details. */ #define BUILTIN_FTP 1 /* * If you enable POP support, this is the the port name * that nmh will use. Make sure this is defined in your * /etc/services file (or its NIS/NIS+ equivalent). If you * are using KPOP, you will probably need to change this * to "kpop". */ #define POPSERVICE "kpop" /* * Define the default creation modes for folders and messages. */ #define DEFAULT_FOLDER_MODE "0700" #define DEFAULT_MESSAGE_MODE "0600" /* * The prefix which is prepended to the name of messages when they * are "removed" by rmm. This should typically be `,' or `#' */ #define BACKUP_PREFIX ".#" /* * Name of link to file to which you are replying. */ #define LINK "@" /* * If wait/waitpid returns an int (no union wait). */ #define WAITINT 1 /***** END USER CONFIGURATION SECTION *****/ /* Define to empty if the keyword does not work. */ #undef const /* Define to `int' if doesn't define. */ #undef gid_t /* Define if your struct stat has st_blksize. */ #undef HAVE_ST_BLKSIZE /* Define if you have that is POSIX.1 compatible. */ #undef HAVE_SYS_WAIT_H /* Define if you have . */ #undef HAVE_VFORK_H /* Define to `int' if doesn't define. */ #undef mode_t /* Define to `long' if doesn't define. */ #undef off_t /* Define to `int' if doesn't define. */ #undef pid_t /* Define as the return type of signal handlers (int or void). */ #undef RETSIGTYPE /* Define to `unsigned' if doesn't define. */ #undef size_t /* Define if the `S_IS*' macros in do not work properly. */ #undef STAT_MACROS_BROKEN /* Define if you have the ANSI C header files. */ #undef STDC_HEADERS /* Define if you can safely include both and . */ #undef TIME_WITH_SYS_TIME /* Define to `int' if doesn't define. */ #undef uid_t /* Define vfork as fork if vfork does not work. */ #undef vfork /* * Define this if you want SMTP (simple mail transport protocol) * support. When sending mail, instead of passing the message to * the mail transport agent (typically sendmail), nmh will open a * socket connection to the mail port on the machine specified in * the `mts.conf' file (default is localhost), and speak SMTP directly. */ #undef SMTPMTS /* * Use sendmail as transport agent. Post messages by piping * them directly to sendmail. */ #undef SENDMTS /* * Define this to compile client-side support for pop into * inc and msgchk. Do not change this value manually. You * must run configure with the '--enable-nmh-pop' option * to correctly build the pop client support. */ #undef POP /* * Define this to compile client-side support for kpop * (kerberized pop) into inc and msgchk. Do not change this * value manually. You must run configure with the option * '--with-krb4=PREFIX' to correctly build the kpop client support. */ #undef KPOP /* * Define this to "pop" when using Kerberos V4 */ #undef KPOP_PRINCIPAL /* * Define this to compile support for using Hesiod to locate * pop servers into inc and msgchk. Do not change this value * manually. You must run configure with the option * '--with-hesiod=PREFIX' to correctly build Hesiod support. */ #undef HESIOD /* * Compile in support for the Emacs front-end mh-e. */ #undef MHE /* Define to 1 if your termcap library has the ospeed variable */ #undef HAVE_OSPEED /* Define to 1 if you have ospeed, but it is not defined in termcap.h */ #undef MUST_DEFINE_OSPEED /* Define to 1 if you have reliable signals */ #undef RELIABLE_SIGNALS /* Define to 1 if you use POSIX style signal handling */ #undef POSIX_SIGNALS /* Define to 1 if you use BSD style signal handling (and can block signals) */ #undef BSD_SIGNALS /* Define to 1 if you use SYS style signal handling (and can block signals) */ #undef SYSV_SIGNALS /* Define to 1 if you have no signal blocking at all (bummer) */ #undef NO_SIGNAL_BLOCKING /* Define to `unsigned int' if or doesn't define */ #undef sigset_t /* * Define to 1 if your vi has ATT bug, such that it returns * non-zero exit codes on `pseudo-errors'. */ #undef ATTVIBUG /* Define ruserpass as _ruserpass if your libraries have a bug * * such that it can't find ruserpass, but can find _ruserpass. */ #undef ruserpass /* Define if your system defines TIOCGWINSZ in sys/ioctl.h. */ #undef GWINSZ_IN_SYS_IOCTL /* Define if your system defines `struct winsize' in sys/ptem.h. */ #undef WINSIZE_IN_PTEM /* Define to 1 if struct tm has gmtoff */ #undef HAVE_TM_GMTOFF /* Define if you have the killpg function. */ #undef HAVE_KILLPG /* Define if you have the lstat function. */ #undef HAVE_LSTAT /* Define if you have the sigaction function. */ #undef HAVE_SIGACTION /* Define if you have the sigblock function. */ #undef HAVE_SIGBLOCK /* Define if you have the sighold function. */ #undef HAVE_SIGHOLD /* Define if you have the sigprocmask function. */ #undef HAVE_SIGPROCMASK /* Define if you have the sigrelse function. */ #undef HAVE_SIGRELSE /* Define if you have the sigsetjmp function. */ #undef HAVE_SIGSETJMP /* Define if you have the sigsetmask function. */ #undef HAVE_SIGSETMASK /* Define if you have the snprintf function. */ #undef HAVE_SNPRINTF /* Define if you have the strdup function. */ #undef HAVE_STRDUP /* Define if you have the strerror function. */ #undef HAVE_STRERROR /* Define if you have the tzset function. */ #undef HAVE_TZSET /* Define if you have the uname function. */ #undef HAVE_UNAME /* Define if you have the wait3 function. */ #undef HAVE_WAIT3 /* Define if you have the waitpid function. */ #undef HAVE_WAITPID /* Define if you have the writev function. */ #undef HAVE_WRITEV /* Define if you have the header file. */ #undef HAVE_ARPA_FTP_H /* Define if you have the header file. */ #undef HAVE_ARPA_INET_H /* Define if you have the header file. */ #undef HAVE_CRYPT_H /* Define if you have the header file. */ #undef HAVE_DIRENT_H /* Define if you have the header file. */ #undef HAVE_ERRNO_H /* Define if you have the header file. */ #undef HAVE_FCNTL_H /* Define if you have the header file. */ #undef HAVE_LIMITS_H /* Define if you have the header file. */ #undef HAVE_LOCALE_H /* Define if you have the header file. */ #undef HAVE_MEMORY_H /* Define if you have the header file. */ #undef HAVE_NDIR_H /* Define if you have the header file. */ #undef HAVE_STDLIB_H /* Define if you have the header file. */ #undef HAVE_STRING_H /* Define if you have the header file. */ #undef HAVE_SYS_DIR_H /* Define if you have the header file. */ #undef HAVE_SYS_NDIR_H /* Define if you have the header file. */ #undef HAVE_SYS_PARAM_H /* Define if you have the header file. */ #undef HAVE_SYS_TIME_H /* Define if you have the header file. */ #undef HAVE_SYS_UTSNAME_H /* Define if you have the header file. */ #undef HAVE_TERMCAP_H /* Define if you have the header file. */ #undef HAVE_TERMIO_H /* Define if you have the header file. */ #undef HAVE_TERMIOS_H /* Define if you have the header file. */ #undef HAVE_UNISTD_H /* Define if you have the header file. */ #undef HAVE_DB_H /* Define if you have the header file. */ #undef HAVE_NDBM_H /* Define if you have the ndbm library (-lndbm). */ #undef HAVE_LIBNDBM /* Define if you have the nsl library (-lnsl). */ #undef HAVE_LIBNSL /* Define if you have the resolv library (-lresolv). */ #undef HAVE_LIBRESOLV /* Define if you have the socket library (-lsocket). */ #undef HAVE_LIBSOCKET