/* subprocs.c --- choosing, spawning, and killing screenhacks. * xscreensaver, Copyright (c) 1991, 1992, 1993, 1995, 1997, 1998 * Jamie Zawinski * * Permission to use, copy, modify, distribute, and sell this software and its * documentation for any purpose is hereby granted without fee, provided that * the above copyright notice appear in all copies and that both that * copyright notice and this permission notice appear in supporting * documentation. No representations are made about the suitability of this * software for any purpose. It is provided "as is" without express or * implied warranty. */ #ifdef HAVE_CONFIG_H # include "config.h" #endif #include #include #include #include /* not used for much... */ #ifndef ESRCH # include #endif #include /* sys/resource.h needs this for timeval */ #ifdef HAVE_SYS_WAIT_H # include /* for waitpid() and associated macros */ #endif #if defined(HAVE_SETPRIORITY) && defined(PRIO_PROCESS) # include /* for setpriority() and PRIO_PROCESS */ #endif #ifdef VMS # include # include /* for close */ # include /* for getpid */ # define pid_t int # define fork vfork #endif /* VMS */ #include /* for the signal names */ #if !defined(SIGCHLD) && defined(SIGCLD) # define SIGCHLD SIGCLD #endif #if 0 /* putenv() is declared in stdlib.h on modern linux systems. */ #ifdef HAVE_PUTENV extern int putenv (/* const char * */); /* getenv() is in stdlib.h... */ #endif #endif extern int kill (pid_t, int); /* signal() is in sys/signal.h... */ /* This file doesn't need the Xt headers, so stub these types out... */ #undef XtPointer #define XtAppContext void* #define XrmDatabase void* #define XtIntervalId void* #define XtPointer void* #define Widget void* #include "xscreensaver.h" #include "yarandom.h" extern saver_info *global_si_kludge; /* I hate C so much... */ static void nice_subproc (int nice_level) { if (nice_level == 0) return; #if defined(HAVE_NICE) { int old_nice = nice (0); int n = nice_level - old_nice; errno = 0; if (nice (n) == -1 && errno != 0) { char buf [512]; sprintf (buf, "%s: nice(%d) failed", blurb(), n); perror (buf); } } #elif defined(HAVE_SETPRIORITY) && defined(PRIO_PROCESS) if (setpriority (PRIO_PROCESS, getpid(), nice_level) != 0) { char buf [512]; sprintf (buf, "%s: setpriority(PRIO_PROCESS, %lu, %d) failed", blurb(), (unsigned long) getpid(), nice_level); perror (buf); } #else fprintf (stderr, "%s: don't know how to change process priority on this system.\n", blurb()); #endif } #ifndef VMS static void exec_simple_command (const char *command) { char *av[1024]; int ac = 0; char *token = strtok (strdup(command), " \t"); while (token) { av[ac++] = token; token = strtok(0, " \t"); } av[ac] = 0; execvp (av[0], av); /* shouldn't return. */ { char buf [512]; sprintf (buf, "%s: could not execute \"%s\"", blurb(), av[0]); perror (buf); if (errno == ENOENT && (token = getenv("PATH"))) { # ifndef PATH_MAX # ifdef MAXPATHLEN # define PATH_MAX MAXPATHLEN # else # define PATH_MAX 2048 # endif # endif char path[PATH_MAX]; fprintf (stderr, "\n"); *path = 0; # if defined(HAVE_GETCWD) getcwd (path, sizeof(path)); # elif defined(HAVE_GETWD) getwd (path); # endif if (*path) fprintf (stderr, " Current directory is: %s\n", path); fprintf (stderr, " PATH is:\n"); token = strtok (strdup(token), ":"); while (token) { fprintf (stderr, " %s\n", token); token = strtok(0, ":"); } fprintf (stderr, "\n"); } } fflush(stderr); fflush(stdout); exit (1); /* Note that this only exits a child fork. */ } static void exec_complex_command (const char *shell, const char *command) { char *av[5]; int ac = 0; char *command2 = (char *) malloc (strlen (command) + 6); memcpy (command2, "exec ", 5); memcpy (command2 + 5, command, strlen (command) + 1); /* Invoke the shell as "/bin/sh -c 'exec prog -arg -arg ...'" */ av [ac++] = (char *) shell; av [ac++] = "-c"; av [ac++] = command2; av [ac] = 0; execvp (av[0], av); /* shouldn't return. */ { char buf [512]; sprintf (buf, "%s: execvp(\"%s\") failed", blurb(), av[0]); perror (buf); fflush(stderr); fflush(stdout); exit (1); /* Note that this only exits a child fork. */ } } #else /* VMS */ static void exec_vms_command (const char *command) { system (command); fflush (stderr); fflush (stdout); exit (1); /* Note that this only exits a child fork. */ } #endif /* !VMS */ static void exec_screenhack (saver_info *si, const char *command) { /* I don't believe what a sorry excuse for an operating system UNIX is! - I want to spawn a process. - I want to know it's pid so that I can kill it. - I would like to receive a message when it dies of natural causes. - I want the spawned process to have user-specified arguments. If shell metacharacters are present (wildcards, backquotes, etc), the only way to parse those arguments is to run a shell to do the parsing for you. And the only way to know the pid of the process is to fork() and exec() it in the spawned side of the fork. But if you're running a shell to parse your arguments, this gives you the pid of the *shell*, not the pid of the *process* that you're actually interested in, which is an *inferior* of the shell. This also means that the SIGCHLD you get applies to the shell, not its inferior. (Why isn't that sufficient? I don't remember any more, but it turns out that it isn't.) So, the only solution, when metacharacters are present, is to force the shell to exec() its inferior. What a fucking hack! We prepend "exec " to the command string, and hope it doesn't contain unquoted semicolons or ampersands (we don't search for them, because we don't want to prohibit their use in quoted strings (messages, for example) and parsing out the various quote characters is too much of a pain.) (Actually, Clint Wong points out that process groups might be used to take care of this problem; this may be worth considering some day, except that, 1: this code works now, so why fix it, and 2: from what I've seen in Emacs, dealing with process groups isn't especially portable.) */ saver_preferences *p = &si->prefs; #ifndef VMS Bool hairy_p = !!strpbrk (command, "*?$&!<>[];`'\\\"="); /* note: = is in the above because of the sh syntax "FOO=bar cmd". */ if (p->verbose_p) fprintf (stderr, "%s: spawning \"%s\" in pid %lu%s.\n", blurb(), command, (unsigned long) getpid (), (hairy_p ? " (via shell)" : "")); if (hairy_p) /* If it contains any shell metacharacters, do it the hard way, and fork a shell to parse the arguments for us. */ exec_complex_command (p->shell, command); else /* Otherwise, we can just exec the program directly. */ exec_simple_command (command); #else /* VMS */ if (p->verbose_p) fprintf (stderr, "%s: spawning \"%s\" in pid %lu.\n", blurb(), command, getpid()); exec_vms_command (command); #endif /* VMS */ abort(); /* that shouldn't have returned. */ } /* Management of child processes, and de-zombification. */ enum job_status { job_running, /* the process is still alive */ job_stopped, /* we have sent it a STOP signal */ job_killed, /* we have sent it a TERM signal */ job_dead /* we have wait()ed for it, and it's dead -- this state only occurs so that we can avoid calling free() from a signal handler. Shortly after going into this state, the list element will be removed. */ }; struct screenhack_job { char *name; pid_t pid; enum job_status status; struct screenhack_job *next; }; static struct screenhack_job *jobs = 0; /* for debugging -- nothing calls this, but it's useful to invoke from gdb. */ void show_job_list (void) { struct screenhack_job *job; fprintf(stderr, "%s: job list:\n", blurb()); for (job = jobs; job; job = job->next) fprintf (stderr, " %5ld: (%s) %s\n", (long) job->pid, (job->status == job_running ? "running" : job->status == job_stopped ? "stopped" : job->status == job_killed ? " killed" : job->status == job_dead ? " dead" : " ???"), job->name); fprintf (stderr, "\n"); } static void clean_job_list (void); struct screenhack_job * make_job (pid_t pid, const char *cmd) { struct screenhack_job *job = (struct screenhack_job *) malloc (sizeof(*job)); static char name [1024]; const char *in = cmd; char *out = name; clean_job_list(); while (isspace(*in)) in++; /* skip whitespace */ while (!isspace(*in) && *in != ':') *out++ = *in++; /* snarf first token */ while (isspace(*in)) in++; /* skip whitespace */ if (*in == ':') /* token was a visual name; skip it. */ { in++; out = name; while (isspace(*in)) in++; /* skip whitespace */ while (!isspace(*in)) *out++ = *in++; /* snarf first token */ } *out = 0; job->name = strdup(name); job->pid = pid; job->status = job_running; job->next = jobs; jobs = job; return jobs; } static void free_job (struct screenhack_job *job) { if (!job) return; else if (job == jobs) jobs = jobs->next; else { struct screenhack_job *job2, *prev; for (prev = 0, job2 = jobs; job2; prev = job2, job2 = job2->next) if (job2 == job) { prev->next = job->next; break; } } free(job->name); free(job); } /* Cleans out dead jobs from the jobs list -- this must only be called from the main thread, not from a signal handler. */ static void clean_job_list (void) { struct screenhack_job *job, *prev, *next; for (prev = 0, job = jobs, next = (job ? job->next : 0); job; prev = job, job = next, next = (job ? job->next : 0)) { if (job->status == job_dead) { if (prev) prev->next = next; free_job (job); job = prev; } } } static struct screenhack_job * find_job (pid_t pid) { struct screenhack_job *job; for (job = jobs; job; job = job->next) if (job->pid == pid) return job; return 0; } static void await_dying_children (saver_info *si); #ifndef VMS static void describe_dead_child (saver_info *, pid_t, int wait_status); #endif /* Semaphore to temporarily turn the SIGCHLD handler into a no-op. Don't alter this directly -- use block_sigchld() / unblock_sigchld(). */ static int block_sigchld_handler = 0; static void block_sigchld (void) { #ifdef HAVE_SIGACTION sigset_t child_set; sigemptyset (&child_set); sigaddset (&child_set, SIGCHLD); sigprocmask (SIG_BLOCK, &child_set, 0); #endif /* HAVE_SIGACTION */ block_sigchld_handler++; } static void unblock_sigchld (void) { #ifdef HAVE_SIGACTION sigset_t child_set; sigemptyset(&child_set); sigaddset(&child_set, SIGCHLD); sigprocmask(SIG_UNBLOCK, &child_set, 0); #endif /* HAVE_SIGACTION */ block_sigchld_handler--; } static int kill_job (saver_info *si, pid_t pid, int signal) { saver_preferences *p = &si->prefs; struct screenhack_job *job; int status = -1; clean_job_list(); if (block_sigchld_handler) /* This function should not be called from the signal handler. */ abort(); block_sigchld(); /* we control the horizontal... */ job = find_job (pid); if (!job || !job->pid || job->status == job_killed) { if (p->verbose_p) fprintf (stderr, "%s: no child %ld to signal!\n", blurb(), (long) pid); goto DONE; } switch (signal) { case SIGTERM: job->status = job_killed; break; #ifdef SIGSTOP /* #### there must be a way to do this on VMS... */ case SIGSTOP: job->status = job_stopped; break; case SIGCONT: job->status = job_running; break; #endif /* SIGSTOP */ default: abort(); } #ifdef SIGSTOP if (p->verbose_p) fprintf (stderr, "%s: %s pid %lu.\n", blurb(), (signal == SIGTERM ? "killing" : signal == SIGSTOP ? "suspending" : signal == SIGCONT ? "resuming" : "signalling"), (unsigned long) job->pid); #else /* !SIGSTOP */ if (p->verbose_p) fprintf (stderr, "%s: %s pid %lu.\n", blurb(), "killing", (unsigned long) job->pid); #endif /* !SIGSTOP */ status = kill (job->pid, signal); if (p->verbose_p && status < 0) { if (errno == ESRCH) fprintf (stderr, "%s: child process %lu (%s) was already dead.\n", blurb(), job->pid, job->name); else { char buf [1024]; sprintf (buf, "%s: couldn't kill child process %lu (%s)", blurb(), job->pid, job->name); perror (buf); } } await_dying_children (si); DONE: unblock_sigchld(); if (block_sigchld_handler < 0) abort(); clean_job_list(); return status; } #ifdef SIGCHLD static RETSIGTYPE sigchld_handler (int sig) { saver_info *si = global_si_kludge; /* I hate C so much... */ if (si->prefs.debug_p) fprintf(stderr, "%s: got SIGCHLD%s\n", blurb(), (block_sigchld_handler ? " (blocked)" : "")); if (block_sigchld_handler < 0) abort(); else if (block_sigchld_handler == 0) { block_sigchld(); await_dying_children (si); unblock_sigchld(); } init_sigchld(); } #endif /* SIGCHLD */ #ifndef VMS static void await_dying_children (saver_info *si) { while (1) { int wait_status = 0; pid_t kid; errno = 0; kid = waitpid (-1, &wait_status, WNOHANG|WUNTRACED); if (si->prefs.debug_p) { if (kid < 0 && errno) fprintf (stderr, "%s: waitpid(-1) ==> %ld (%d)\n", blurb(), (long) kid, errno); else fprintf (stderr, "%s: waitpid(-1) ==> %ld\n", blurb(), (long) kid); } /* 0 means no more children to reap. -1 means error -- except "interrupted system call" isn't a "real" error, so if we get that, we should just try again. */ if (kid == 0 || (kid < 0 && errno != EINTR)) break; describe_dead_child (si, kid, wait_status); } } static void describe_dead_child (saver_info *si, pid_t kid, int wait_status) { int i; saver_preferences *p = &si->prefs; struct screenhack_job *job = find_job (kid); const char *name = job ? job->name : ""; if (WIFEXITED (wait_status)) { int exit_status = WEXITSTATUS (wait_status); /* Treat exit code as a signed 8-bit quantity. */ if (exit_status & 0x80) exit_status |= ~0xFF; /* One might assume that exiting with non-0 means something went wrong. But that loser xswarm exits with the code that it was killed with, so it *always* exits abnormally. Treat abnormal exits as "normal" (don't mention them) if we've just killed the subprocess. But mention them if they happen on their own. */ if (exit_status != 0 && (!job || (p->verbose_p || job->status != job_killed))) fprintf (stderr, "%s: child pid %lu (%s) exited abnormally (code %d).\n", blurb(), (unsigned long) kid, name, exit_status); else if (p->verbose_p) fprintf (stderr, "%s: child pid %lu (%s) exited normally.\n", blurb(), (unsigned long) kid, name); if (job) job->status = job_dead; } else if (WIFSIGNALED (wait_status)) { if (p->verbose_p || !job || job->status != job_killed || WTERMSIG (wait_status) != SIGTERM) fprintf (stderr, "%s: child pid %lu (%s) terminated with %s.\n", blurb(), (unsigned long) kid, name, signal_name (WTERMSIG(wait_status))); if (job) job->status = job_dead; } else if (WIFSTOPPED (wait_status)) { if (p->verbose_p) fprintf (stderr, "%s: child pid %lu (%s) stopped with %s.\n", blurb(), (unsigned long) kid, name, signal_name (WSTOPSIG (wait_status))); if (job) job->status = job_stopped; } else { fprintf (stderr, "%s: child pid %lu (%s) died in a mysterious way!", blurb(), (unsigned long) kid, name); if (job) job->status = job_dead; } /* Clear out the pid so that screenhack_running_p() knows it's dead. */ if (!job || job->status == job_dead) for (i = 0; i < si->nscreens; i++) { saver_screen_info *ssi = &si->screens[i]; if (kid == ssi->pid) ssi->pid = 0; } } #else /* VMS */ static void await_dying_children (saver_info *si) { return; } #endif /* VMS */ void init_sigchld (void) { #ifdef SIGCHLD # ifdef HAVE_SIGACTION /* Thanks to Tom Kelly */ static Bool sigchld_initialized_p = 0; if (!sigchld_initialized_p) { struct sigaction action, old; action.sa_handler = sigchld_handler; sigemptyset(&action.sa_mask); action.sa_flags = 0; if (sigaction(SIGCHLD, &action, &old) < 0) { char buf [255]; sprintf (buf, "%s: couldn't catch SIGCHLD", blurb()); perror (buf); } sigchld_initialized_p = True; } # else /* !HAVE_SIGACTION */ if (((long) signal (SIGCHLD, sigchld_handler)) == -1L) { char buf [255]; sprintf (buf, "%s: couldn't catch SIGCHLD", blurb()); perror (buf); } # endif /* !HAVE_SIGACTION */ #endif /* SIGCHLD */ } static Bool hack_enabled_p (const char *hack) { const char *s = hack; while (isspace(*s)) s++; return (*s != '-'); } static Bool select_visual_of_hack (saver_screen_info *ssi, const char *hack) { saver_info *si = ssi->global; saver_preferences *p = &si->prefs; Bool selected; static char vis [1024]; const char *in = hack; char *out = vis; while (isspace(*in)) in++; /* skip whitespace */ if (*in == '-') in++; /* skip optional "-" */ while (isspace(*in)) in++; /* skip whitespace */ while (!isspace(*in) && *in != ':') *out++ = *in++; /* snarf first token */ while (isspace(*in)) in++; /* skip whitespace */ *out = 0; if (*in == ':') selected = select_visual(ssi, vis); else selected = select_visual(ssi, 0); if (!selected && (p->verbose_p || si->demoing_p)) { if (*in == ':') in++; while (isspace(*in)) in++; fprintf (stderr, (si->demoing_p ? "%s: warning, no \"%s\" visual for \"%s\".\n" : "%s: no \"%s\" visual; skipping \"%s\".\n"), blurb(), (vis ? vis : "???"), in); } return selected; } static void spawn_screenhack_1 (saver_screen_info *ssi, Bool first_time_p) { saver_info *si = ssi->global; saver_preferences *p = &si->prefs; raise_window (si, first_time_p, True, False); XFlush (si->dpy); if (p->screenhacks_count) { char *hack; pid_t forked; char buf [255]; int new_hack; int retry_count = 0; Bool force = False; AGAIN: if (p->screenhacks_count == 1) /* If there is only one hack in the list, there is no choice. */ new_hack = 0; else if (si->selection_mode == -1) /* Select the next hack, wrapping. */ new_hack = (ssi->current_hack + 1) % p->screenhacks_count; else if (si->selection_mode == -2) /* Select the previous hack, wrapping. */ new_hack = ((ssi->current_hack + p->screenhacks_count - 1) % p->screenhacks_count); else if (si->selection_mode > 0) /* Select a specific hack, by number. No negotiation. */ { new_hack = ((si->selection_mode - 1) % p->screenhacks_count); force = True; } else { /* Select a random hack (but not the one we just ran.) */ while ((new_hack = random () % p->screenhacks_count) == ssi->current_hack) ; } ssi->current_hack = new_hack; hack = p->screenhacks[ssi->current_hack]; /* If the hack is disabled, or there is no visual for this hack, then try again (move forward, or backward, or re-randomize.) Unless this hack was specified explicitly, in which case, use it regardless. */ if (force) select_visual_of_hack (ssi, hack); if (!force && (!hack_enabled_p (hack) || !select_visual_of_hack (ssi, hack))) { if (++retry_count > (p->screenhacks_count*4)) { /* Uh, oops. Odds are, there are no suitable visuals, and we're looping. Give up. (This is totally lame, what we should do is make a list of suitable hacks at the beginning, then only loop over them.) */ if (p->verbose_p) fprintf(stderr, "%s: no suitable visuals for these programs.\n", blurb()); return; } else goto AGAIN; } /* Turn off "next" and "prev" modes now, but "demo" mode is only turned off by explicit action. */ if (si->selection_mode < 0) si->selection_mode = 0; /* If there's a visual description on the front of the command, nuke it. */ { char *in = hack; while (isspace(*in)) in++; /* skip whitespace */ if (*in == '-') in++; /* skip optional "-" */ while (isspace(*in)) in++; /* skip whitespace */ hack = in; while (!isspace(*in) && *in != ':') in++; /* snarf first token */ while (isspace(*in)) in++; /* skip whitespace */ if (*in == ':') { in++; while (isspace(*in)) in++; hack = in; } } switch ((int) (forked = fork ())) { case -1: sprintf (buf, "%s: couldn't fork", blurb()); perror (buf); restore_real_vroot (si); saver_exit (si, 1, 0); case 0: close (ConnectionNumber (si->dpy)); /* close display fd */ nice_subproc (p->nice_inferior); /* change process priority */ hack_subproc_environment (ssi); /* set $DISPLAY */ exec_screenhack (si, hack); /* this does not return */ abort(); break; default: ssi->pid = forked; (void) make_job (forked, hack); break; } } } void spawn_screenhack (saver_info *si, Bool first_time_p) { int i; if (!monitor_powered_on_p (si)) { if (si->prefs.verbose_p) fprintf (stderr, "%s: server reports that monitor has powered down; " "not launching a new hack.\n", blurb()); return; } for (i = 0; i < si->nscreens; i++) { saver_screen_info *ssi = &si->screens[i]; spawn_screenhack_1 (ssi, first_time_p); } } void kill_screenhack (saver_info *si) { int i; for (i = 0; i < si->nscreens; i++) { saver_screen_info *ssi = &si->screens[i]; if (ssi->pid) kill_job (si, ssi->pid, SIGTERM); ssi->pid = 0; } } void suspend_screenhack (saver_info *si, Bool suspend_p) { #ifdef SIGSTOP /* older VMS doesn't have it... */ int i; for (i = 0; i < si->nscreens; i++) { saver_screen_info *ssi = &si->screens[i]; if (ssi->pid) kill_job (si, ssi->pid, (suspend_p ? SIGSTOP : SIGCONT)); } #endif /* SIGSTOP */ } /* Called when we're exiting abnormally, to kill off the subproc. */ void emergency_kill_subproc (saver_info *si) { int i; #ifdef SIGCHLD signal (SIGCHLD, SIG_IGN); #endif /* SIGCHLD */ for (i = 0; i < si->nscreens; i++) { saver_screen_info *ssi = &si->screens[i]; if (ssi->pid) { kill_job (si, ssi->pid, SIGTERM); ssi->pid = 0; } } } Bool screenhack_running_p (saver_info *si) { Bool result = True; int i; for (i = 0; i < si->nscreens; i++) { saver_screen_info *ssi = &si->screens[i]; if (!ssi->pid) result = False; } return result; } /* Environment variables. */ /* Modifies $PATH in the current environment, so that if DEFAULT_PATH_PREFIX is defined, the xscreensaver daemon will search that directory for hacks. */ void hack_environment (saver_info *si) { #if defined(HAVE_PUTENV) && defined(DEFAULT_PATH_PREFIX) static const char *def_path = DEFAULT_PATH_PREFIX; if (def_path && *def_path) { const char *opath = getenv("PATH"); char *npath = (char *) malloc(strlen(def_path) + strlen(opath) + 20); strcpy (npath, "PATH="); strcat (npath, def_path); strcat (npath, ":"); strcat (npath, opath); if (putenv (npath)) abort (); } #endif /* HAVE_PUTENV && DEFAULT_PATH_PREFIX */ } void hack_subproc_environment (saver_screen_info *ssi) { /* Store $DISPLAY into the environment, so that the $DISPLAY variable that the spawned processes inherit is correct. First, it must be on the same host and display as the value of -display passed in on our command line (which is not necessarily the same as what our $DISPLAY variable is.) Second, the screen number in the $DISPLAY passed to the subprocess should be the screen on which this particular hack is running -- not the display specification which the driver itself is using, since the driver ignores its screen number and manages all existing screens. */ saver_info *si = ssi->global; const char *odpy = DisplayString (si->dpy); char *ndpy = (char *) malloc(strlen(odpy) + 20); int screen_number; char *s; for (screen_number = 0; screen_number < si->nscreens; screen_number++) if (ssi == &si->screens[screen_number]) break; strcpy (ndpy, "DISPLAY="); s = ndpy + strlen(ndpy); strcpy (s, odpy); while (*s && *s != ':') s++; /* skip to colon */ while (*s == ':') s++; /* skip over colons */ while (isdigit(*s)) s++; /* skip over dpy number */ while (*s == '.') s++; /* skip over dot */ if (s[-1] != '.') *s++ = '.'; /* put on a dot */ sprintf(s, "%d", screen_number); /* put on screen number */ /* Allegedly, BSD 4.3 didn't have putenv(), but nobody runs such systems any more, right? It's not Posix, but everyone seems to have it. */ #ifdef HAVE_PUTENV if (putenv (ndpy)) abort (); #endif /* HAVE_PUTENV */ } /* Restarting the xscreensaver process from scratch. */ static char **saved_argv; void save_argv (int argc, char **argv) { saved_argv = (char **) calloc (argc+2, sizeof (char *)); saved_argv [argc] = 0; while (argc--) { int i = strlen (argv [argc]) + 1; saved_argv [argc] = (char *) malloc (i); memcpy (saved_argv [argc], argv [argc], i); } } /* Re-execs the process with the arguments in saved_argv. Does not return unless there was an error. */ void restart_process (saver_info *si) { if (si->prefs.verbose_p) { int i; fprintf (real_stderr, "%s: re-executing", blurb()); for (i = 0; saved_argv[i]; i++) fprintf (real_stderr, " %s", saved_argv[i]); fprintf (real_stderr, "\n"); } describe_uids (si, real_stderr); fprintf (real_stderr, "\n"); fflush (real_stdout); fflush (real_stderr); execvp (saved_argv [0], saved_argv); /* shouldn't return */ { char buf [512]; sprintf (buf, "%s: could not restart process", blurb()); perror(buf); fflush(stderr); } XBell(si->dpy, 0); }