This is TeX, Version 3.1415 (C version 6.1) (format=lplain 98.6.28)  28 DEC 1998 16:38
**office_maint.tex
(office_maint.tex
LaTeX Version 2.09 <25 March 1992>
! Undefined control sequence.
l.1 \section
            {Toner Cartridges}
? 
LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   T
l.1 \section{T
              oner Cartridges}
? q
OK, entering \batchmode...
LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   T
l.3 T
     he office has, at points, ordered two kinds of cartridges. Both can
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.8 \subsection
               {HP Cartridges}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   H
l.8 \subsection{H
                 P Cartridges}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   1
l.13  1
       ) Look in the manual inside the box.  There is one there.
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   A
l.20 A
      fter you have slapped the label on, call UPS and ask them to come pick...

You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.24 \subsection
                {Nashua Cartridges}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   N
l.24 \subsection{N
                  ashua Cartridges}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   N
l.27 N
      ew toner cartridges can be ordered through Office Depot. The item is o...

You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.29 \section
             {Recycling}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   R
l.29 \section{R
               ecycling}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   T
l.31 T
      here are four blue bins at the back of the office devoted to (non-soda
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   T
l.39 T
      he latest guidelines from abbe:
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   J
l.41 {\it J
           et-A-Way will no longer accept any recyclables left for pickups in
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   G
l.48 G
      lass (clear and colored), aluminum, tin and plastics (\#1 \& \#2 only)...

You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   N
l.51 N
      ewspaper and white paper can be mixed and put either in brown paper
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   T
l.54 T
      he empty deposit soda cans should be sorted by maker (Coca Cola or
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   E
l.61 E
      mpty deposit bottles, in the blue bins with the dollar sign (\$),
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.64 \section
             {General Office Cleanliness}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   G
l.64 \section{G
               eneral Office Cleanliness}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.66 \subsection
                {Office Cleaning Hour}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   O
l.66 \subsection{O
                  ffice Cleaning Hour}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.71 \subsection
                {Recycling}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   R
l.71 \subsection{R
                  ecycling}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.77 \subsection
                {Disasters}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   D
l.77 \subsection{D
                  isasters}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.81 \section
             {The Fridge}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   T
l.81 \section{T
               he Fridge}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   O
l.83 O
      fficially, anything not maintained by CokeComm may be thrown out of
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   T
l.88 T
      he last fridge cleaning occurred in February of 1994, at which time
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
l.94 \section
             {Hostnames in the Office}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   H
l.94 \section{H
               ostnames in the Office}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   T
l.96 T
      his section was last updated on May 30th, 1998. \\
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.


Underfull \hbox (badness 10000) in paragraph at lines 96--97


\hbox(0.0+0.0)x469.75499
.\glue(\rightskip) 0.0

! Undefined control sequence.
l.98 \scriptsize
                
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   \unhbox 
\leavevmode ->\unhbox 
                      \voidb@x 
\@tabular ->\leavevmode 
                        \hbox \bgroup $\let \@acol \@tabacol \let \@classz \...
l.99 \begin{tabular}
                    {|c|c|c|c|} \hline
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
l.150 \normalsize
                 
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
l.152 \section
              {Machines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.


Underfull \vbox (badness 10000) has occurred while \output is active
\vbox(1000.0+0.0)x469.75499, glue set 11.73914
.\glue(\topskip) 3.05556
.\hbox(6.94444+1.94444)x469.75499, glue set 375.44933fil
..\hbox(0.0+0.0)x20.0
..\tenrm T
..\kern-0.83334
..\tenrm o
..\tenrm n
..etc.
.\glue(\parskip) 0.0 plus 1.0
.\glue(\baselineskip) 3.11111
.\hbox(6.94444+1.94444)x469.75499, glue set 0.4803
..\hbox(0.0+0.0)x20.0
..\tenrm T
..\tenrm h
..\tenrm e
..\glue 3.33333 plus 1.66666 minus 1.11111
..etc.
.etc.

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [1]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.


Overfull \vbox (284.0pt too high) has occurred while \output is active
\vbox(0.0+0.0)x469.75499
.\glue(\topskip) 0.0
.\hbox(146.5+141.5)x469.75499, glue set 3.94862fil
..\hbox(0.0+0.0)x20.0
..\hbox(146.5+141.5)x445.80637
...\mathon
...\vbox(146.5+141.5)x445.80637 []
...\mathoff
..\penalty 10000
..\glue(\parfillskip) 0.0 plus 1.0fil
..\glue(\rightskip) 0.0
.\glue -4.0

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [2]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   M
l.152 \section{M
                achines}
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   M
l.152 \section{M
                achines}
You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.


Overfull \vbox (10.0pt too high) has occurred while \output is active
\vbox(0.0+0.0)x469.75499
.\glue(\topskip) 3.05556
.\hbox(6.94444+0.0)x469.75499, glue set 409.14381fil
..\hbox(0.0+0.0)x20.0
..\tenrm M
..\tenrm a
..\tenrm c
..\kern-0.27779
..etc.
.\glue 0.0

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   I
l.154 I
       t's very important that machine hardware be kept in a proper state. This
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   I
l.154 I
       t's very important that machine hardware be kept in a proper state. This
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
<everypar> 
           \@nodocument 
<to be read again> 
                   I
l.154 I
       t's very important that machine hardware be kept in a proper state. This
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [3]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   I
l.154 I
       t's very important that machine hardware be kept in a proper state. This
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   I
l.154 I
       t's very important that machine hardware be kept in a proper state. This
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
<everypar> 
           \@nodocument 
<to be read again> 
                   I
l.154 I
       t's very important that machine hardware be kept in a proper state. This
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

LaTeX error.  See LaTeX manual for explanation.
              Type  H <return>  for immediate help.
! Missing \begin{document}.
\@latexerr ...for immediate help.}\errmessage {#1}
                                                  
<to be read again> 
                   I
l.154 I
       t's very important that machine hardware be kept in a proper state. This

You're in trouble here.  Try typing  <return>  to proceed.
If that doesn't work, type  X <return>  to quit.


Overfull \vbox (10.0pt too high) has occurred while \output is active
\vbox(0.0+0.0)x469.75499
.\glue(\topskip) 3.05556
.\hbox(6.94444+1.94444)x469.75499, glue set 0.23532
..\hbox(0.0+0.0)x20.0
..\tenrm I
..\tenrm t
..\tenrm '
..\tenrm s
..etc.
.\glue -1.94444

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [4]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.


Overfull \vbox (10.0pt too high) has occurred while \output is active
\vbox(0.0+0.0)x469.75499
.\glue(\topskip) 3.05556
.\hbox(6.94444+1.94444)x469.75499, glue set 0.5193
..\tenrm s
..\tenrm h
..\tenrm o
..\tenrm u
..\tenrm l
..etc.
.\glue -1.94444

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [5]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.


Overfull \vbox (10.0pt too high) has occurred while \output is active
\vbox(0.0+0.0)x469.75499
.\glue(\topskip) 3.05556
.\hbox(6.94444+1.94444)x469.75499, glue set 0.09575
..\tenrm t
..\tenrm h
..\tenrm a
..\tenrm t
..\glue 3.33333 plus 1.66666 minus 1.11111
..etc.
.\glue -1.94444

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [6]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.


Overfull \vbox (10.0pt too high) has occurred while \output is active
\vbox(0.0+0.0)x469.75499
.\glue(\topskip) 3.05556
.\hbox(6.94444+1.94444)x469.75499, glue set - 0.27232
..\tenrm u
..\tenrm n
..\tenrm d
..\tenrm e
..\tenrm r
..etc.
.\glue -1.94444

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [7]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.


Overfull \vbox (10.0pt too high) has occurred while \output is active
\vbox(0.0+0.0)x469.75499
.\glue(\topskip) 3.05556
.\hbox(6.94444+1.94444)x469.75499, glue set - 0.11784
..\tenrm m
..\tenrm o
..\tenrm u
..\tenrm n
..\kern-0.27779
..etc.
.\glue -1.94444

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [8]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.


Overfull \vbox (10.0pt too high) has occurred while \output is active
\vbox(0.0+0.0)x469.75499
.\glue(\topskip) 3.05556
.\hbox(6.94444+1.94444)x469.75499, glue set 0.4863
..\tenrm s
..\tenrm o
..\glue 3.33333 plus 1.66666 minus 1.11111
..\tenrm t
..\tenrm h
..etc.
.\glue -1.94444

! Undefined control sequence.
\normalsize ...\normalsize \rm \else \@normalsize 
                                                  \fi 
\@outputpage ...ut \vbox {\reset@font \normalsize 
                                                  \baselineskip \z@ \lineski...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thehead ->\@oddhead 
                      
\@outputpage ...\let \glossary \@gobble \@thehead 
                                                  }}\dp \@tempboxa \z@ \box ...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@thefoot ->\@oddfoot 
                      
\@outputpage ...\let \glossary \@gobble \@thefoot 
                                                  }}}\global \@colht \texthe...

\@opcol ...lumn \@outputdblcol \else \@outputpage 
                                                  \global \@colht \textheigh...
<output> ...specialoutput \else \@makecol \@opcol 
                                                  \@floatplacement \@startco...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

 [9]
! Undefined control sequence.
\@floatplacement ...global \@toproom \topfraction 
                                                  \@colht \global \@botnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...bal \@botroom \bottomfraction 
                                                  \@colht \global \@colnum \...
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

! Undefined control sequence.
\@floatplacement ...er \@fpmin \floatpagefraction 
                                                  \@colht 
<output> ...se \@makecol \@opcol \@floatplacement 
                                                  \@startcolumn \@whilesw \i...
l.163 
      
The control sequence at the end of the top line
of your error message was never \def'ed. If you have
misspelled it (e.g., `\hobx'), type `I' and the correct
spelling (e.g., `I\hbox'). Otherwise just continue,
and I'll forget about whatever was undefined.

)
! Emergency stop.
<*> office_maint.tex
                    
*** (job aborted, no legal \end found)

 
Here is how much of TeX's memory you used:
 5 strings out of 11977
 64 string characters out of 87075
 37653 words of memory out of 262141
 1977 multiletter control sequences out of 9500
 18996 words of font info for 72 fonts, out of 100000 for 255
 14 hyphenation exceptions out of 607
 9i,6n,11p,576b,92s stack positions out of 300i,40n,60p,3000b,4000s
Output written on office_maint.dvi (9 pages, 9456 bytes).