/* * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. * * The Original Code is the Netscape security libraries. * * The Initial Developer of the Original Code is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1994-2000 Netscape Communications Corporation. All * Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */ /* General NSPR 2.0 errors */ /* Caller must #include "prerror.h" */ ER2( PR_OUT_OF_MEMORY_ERROR, "Memory allocation attempt failed." ) ER2( PR_BAD_DESCRIPTOR_ERROR, "Invalid file descriptor." ) ER2( PR_WOULD_BLOCK_ERROR, "The operation would have blocked." ) ER2( PR_ACCESS_FAULT_ERROR, "Invalid memory address argument." ) ER2( PR_INVALID_METHOD_ERROR, "Invalid function for file type." ) ER2( PR_ILLEGAL_ACCESS_ERROR, "Invalid memory address argument." ) ER2( PR_UNKNOWN_ERROR, "Some unknown error has occurred." ) ER2( PR_PENDING_INTERRUPT_ERROR,"Operation interrupted by another thread." ) ER2( PR_NOT_IMPLEMENTED_ERROR, "function not implemented." ) ER2( PR_IO_ERROR, "I/O function error." ) ER2( PR_IO_TIMEOUT_ERROR, "I/O operation timed out." ) ER2( PR_IO_PENDING_ERROR, "I/O operation on busy file descriptor." ) ER2( PR_DIRECTORY_OPEN_ERROR, "The directory could not be opened." ) ER2( PR_INVALID_ARGUMENT_ERROR, "Invalid function argument." ) ER2( PR_ADDRESS_NOT_AVAILABLE_ERROR, "Network address not available (in use?)." ) ER2( PR_ADDRESS_NOT_SUPPORTED_ERROR, "Network address type not supported." ) ER2( PR_IS_CONNECTED_ERROR, "Already connected." ) ER2( PR_BAD_ADDRESS_ERROR, "Network address is invalid." ) ER2( PR_ADDRESS_IN_USE_ERROR, "Local Network address is in use." ) ER2( PR_CONNECT_REFUSED_ERROR, "Connection refused by peer." ) ER2( PR_NETWORK_UNREACHABLE_ERROR, "Network address is presently unreachable." ) ER2( PR_CONNECT_TIMEOUT_ERROR, "Connection attempt timed out." ) ER2( PR_NOT_CONNECTED_ERROR, "Network file descriptor is not connected." ) ER2( PR_LOAD_LIBRARY_ERROR, "Failure to load dynamic library." ) ER2( PR_UNLOAD_LIBRARY_ERROR, "Failure to unload dynamic library." ) ER2( PR_FIND_SYMBOL_ERROR, "Symbol not found in any of the loaded dynamic libraries." ) ER2( PR_INSUFFICIENT_RESOURCES_ERROR, "Insufficient system resources." ) ER2( PR_DIRECTORY_LOOKUP_ERROR, "A directory lookup on a network address has failed." ) ER2( PR_TPD_RANGE_ERROR, "Attempt to access a TPD key that is out of range." ) ER2( PR_PROC_DESC_TABLE_FULL_ERROR, "Process open FD table is full." ) ER2( PR_SYS_DESC_TABLE_FULL_ERROR, "System open FD table is full." ) ER2( PR_NOT_SOCKET_ERROR, "Network operation attempted on non-network file descriptor." ) ER2( PR_NOT_TCP_SOCKET_ERROR, "TCP-specific function attempted on a non-TCP file descriptor." ) ER2( PR_SOCKET_ADDRESS_IS_BOUND_ERROR, "TCP file descriptor is already bound." ) ER2( PR_NO_ACCESS_RIGHTS_ERROR, "Access Denied." ) ER2( PR_OPERATION_NOT_SUPPORTED_ERROR, "The requested operation is not supported by the platform." ) ER2( PR_PROTOCOL_NOT_SUPPORTED_ERROR, "The host operating system does not support the protocol requested." ) ER2( PR_REMOTE_FILE_ERROR, "Access to the remote file has been severed." ) ER2( PR_BUFFER_OVERFLOW_ERROR, "The value requested is too large to be stored in the data buffer provided." ) ER2( PR_CONNECT_RESET_ERROR, "TCP connection reset by peer." ) ER2( PR_RANGE_ERROR, "Unused." ) ER2( PR_DEADLOCK_ERROR, "The operation would have deadlocked." ) ER2( PR_FILE_IS_LOCKED_ERROR, "The file is already locked." ) ER2( PR_FILE_TOO_BIG_ERROR, "Write would result in file larger than the system allows." ) ER2( PR_NO_DEVICE_SPACE_ERROR, "The device for storing the file is full." ) ER2( PR_PIPE_ERROR, "Unused." ) ER2( PR_NO_SEEK_DEVICE_ERROR, "Unused." ) ER2( PR_IS_DIRECTORY_ERROR, "Cannot perform a normal file operation on a directory." ) ER2( PR_LOOP_ERROR, "Symbolic link loop." ) ER2( PR_NAME_TOO_LONG_ERROR, "File name is too long." ) ER2( PR_FILE_NOT_FOUND_ERROR, "File not found." ) ER2( PR_NOT_DIRECTORY_ERROR, "Cannot perform directory operation on a normal file." ) ER2( PR_READ_ONLY_FILESYSTEM_ERROR, "Cannot write to a read-only file system." ) ER2( PR_DIRECTORY_NOT_EMPTY_ERROR, "Cannot delete a directory that is not empty." ) ER2( PR_FILESYSTEM_MOUNTED_ERROR, "Cannot delete or rename a file object while the file system is busy." ) ER2( PR_NOT_SAME_DEVICE_ERROR, "Cannot rename a file to a file system on another device." ) ER2( PR_DIRECTORY_CORRUPTED_ERROR, "The directory object in the file system is corrupted." ) ER2( PR_FILE_EXISTS_ERROR, "Cannot create or rename a filename that already exists." ) ER2( PR_MAX_DIRECTORY_ENTRIES_ERROR, "Directory is full. No additional filenames may be added." ) ER2( PR_INVALID_DEVICE_STATE_ERROR, "The required device was in an invalid state." ) ER2( PR_DEVICE_IS_LOCKED_ERROR, "The device is locked." ) ER2( PR_NO_MORE_FILES_ERROR, "No more entries in the directory." ) ER2( PR_END_OF_FILE_ERROR, "Encountered end of file." ) ER2( PR_FILE_SEEK_ERROR, "Seek error." ) ER2( PR_FILE_IS_BUSY_ERROR, "The file is busy." ) ER2( PR_IN_PROGRESS_ERROR, "Operation is still in progress (probably a non-blocking connect)." ) ER2( PR_ALREADY_INITIATED_ERROR, "Operation has already been initiated (probably a non-blocking connect)." ) #ifdef PR_GROUP_EMPTY_ERROR ER2( PR_GROUP_EMPTY_ERROR, "The wait group is empty." ) #endif #ifdef PR_INVALID_STATE_ERROR ER2( PR_INVALID_STATE_ERROR, "Object state improper for request." ) #endif ER2( PR_MAX_ERROR, "Placeholder for the end of the list" )