/*=============================================================== * Copyright (C) 1998 Transarc Corporation - All rights reserved *===============================================================*/ #include #include #ifdef AFS_NT40_ENV #include #else #include #include #include #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "error_macros.h" #include "butc_xbsa.h" #include "afs/butx.h" /* GLOBAL CONFIGURATION PARAMETERS */ extern int dump_namecheck; extern int queryoperator; extern int isafile; extern int forcemultiple; extern struct ubik_client *cstruct; dlqlinkT savedEntries; dlqlinkT entries_to_flush; afs_int32 flushSavedEntries(), finishDump(), finishTape(), useTape(), addVolume(); extern struct rx_connection *UV_Bind(); extern char *globalCellName; extern afs_int32 xbsaType; extern afs_int32 groupId; extern afs_int32 BufferSize; extern afs_int32 statusSize; extern FILE *centralLogIO; afs_int32 lastPass=0; #ifdef xbsa char *butcdumpIdStr = "/backup_afs_volume_dumps"; extern struct butx_transactionInfo butxInfo; extern char *xbsaObjectOwner; extern char *appObjectOwner; extern char *xbsaSecToken; extern char *xbsalGName; extern char *globalButcLog; #endif /*xbsa*/ afs_int32 dataSize; /* Size of data to read on each rx_Read() call */ afs_int32 tapeblocks; /* Number of 16K tape datablocks in buffer (!CONF_XBSA) */ /* TBD * * Done 1) dump id generation * Done xx) volume fragment number accounting !! I think. * 2) check abort - check after subroutine calls * Done 3) trailer anomaly * 4) trailer damage indicator after partial dumps ( affects scandump ) * Done 5) Ensure mount failure logged * 6) Ensure bucoord status calls work * * notes * pass 3: * keep token timeout. If no user reponse (idle time > some period) * and tokens about to time out, terminate dump. This provides at * least something usable. */ #define DUMPNAME(dumpname, name, dbDumpId) \ if (dbDumpId == 0) \ sprintf(dumpname, "%s", name); \ else \ sprintf(dumpname, "%s (DumpId %u)", name, dbDumpId); #ifdef AFS_NT40_ENV localtime_r(t, tm) time_t *t; struct tm *tm; { bcopy(localtime(t), tm, sizeof(struct tm)); } #endif struct dumpRock { /* status only */ int tapeSeq; int curVolume; /* index in dumpNode of volume */ int curVolumeStatus; /* more explicit dump state */ afs_uint32 curVolStartPos; /* Starting position of the current volume */ afs_uint32 databaseDumpId; /* real dump id, for db */ afs_uint32 initialDumpId; /* the initial dump, for appended dumps */ afs_int32 volumesDumped; /* # volumes successfully dumped */ afs_int32 volumesFailed; /* # volumes that failed to dump */ afs_int32 volumesNotDumped; /* # volumes that were not dumped (didn't fail) */ /* tape management */ char tapeName[TC_MAXTAPENAMELEN]; struct butm_tapeInfo *tapeInfoPtr; struct butm_tapeLabel tapeLabel; int wroteLabel; /* If the tape label is written */ /* database information */ struct budb_dumpEntry lastDump; /* the last dump of this volset */ struct budb_dumpEntry dump; /* current dump */ struct budb_tapeEntry tape; /* current tape, not used -VA*/ /* links to existing info */ struct dumpNode *node; }; /* configuration variables */ #define HITEOT(code) ((code == BUTM_IO) || (code == BUTM_EOT) || (code == BUTM_IOCTL)) extern int autoQuery; extern int maxpass; afs_int32 tc_EndMargin; afs_int32 tc_KEndMargin; char *bufferBlock; /* compute the absolute expiration date */ afs_int32 calcExpirationDate(expType, expDate, createTime) afs_int32 expType; afs_int32 expDate; afs_int32 createTime; { struct ktime_date kd; afs_int32 Add_RelDate_to_Time(); switch ( expType ) { case BC_REL_EXPDATE: /* expiration date is relative to the creation time of the dump. * This is the only case that requires any work */ Int32To_ktimeRelDate(expDate, &kd); return(Add_RelDate_to_Time(&kd, createTime)); break; case BC_ABS_EXPDATE: return(expDate); break; case BC_NO_EXPDATE: default: return(0); } } afs_int32 curr_bserver = 0; struct rx_connection *curr_fromconn = (struct rx_connection *)0; struct rx_connection *Bind(server) afs_int32 server; { if (curr_fromconn) { if (curr_bserver == server) /* Keep connection if have it */ return (curr_fromconn); rx_DestroyConnection (curr_fromconn); /* Otherwise get rid of it */ curr_fromconn = (struct rx_connection *)0; curr_bserver = 0; } if (server) { curr_fromconn = UV_Bind (server, AFSCONF_VOLUMEPORT); /* Establish new connection */ if (curr_fromconn) curr_bserver = server; } return (curr_fromconn); } /* notes * 1) save the chunksize or otherwise ensure tape space remaining is * check frequently enough * 2) This is called once. For partial dumps, need to * ensure that the tape device is left in the correct state for * further dumps. * */ #define BIGCHUNK 102400 afs_int32 dumpVolume(curDump, dparamsPtr) struct tc_dumpDesc *curDump; struct dumpRock *dparamsPtr; { struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr; struct dumpNode *nodePtr = dparamsPtr->node; afs_int32 taskId = nodePtr->taskID; char *buffer; int fragmentNumber; afs_int32 volumeFlags; afs_int32 kRemaining; afs_int32 rc, code = 0; afs_int32 toread; afs_uint32 volBytesRead; afs_uint32 chunkSize; afs_int32 bytesread; /* rx reads */ int endofvolume=0; /* Have we read all volume data */ int indump=0; int fragmentvolume; struct volumeHeader hostVolumeHeader; struct rx_call *fromcall = (struct rx_call *)0; struct rx_connection *fromconn; afs_int32 updatedate, fromtid = 0; volEntries volumeInfo; afs_int32 bytesWritten; afs_uint32 statuscount=statusSize, tsize=0; dparamsPtr->curVolumeStatus = DUMP_NOTHING; fromconn = Bind(htonl(curDump->hostAddr)); /* get connection to the server */ /* Determine when the volume was last cloned and updated */ volumeInfo.volEntries_val = (volintInfo *)0; volumeInfo.volEntries_len = 0; rc = AFSVolListOneVolume(fromconn, curDump->partition, curDump->vid, &volumeInfo); if (rc) ERROR_EXIT(rc); updatedate = volumeInfo.volEntries_val[0].updateDate; curDump->cloneDate = ((curDump->vtype == RWVOL) ? time(0) : volumeInfo.volEntries_val[0].creationDate); if (curDump->date >= curDump->cloneDate) ERROR_EXIT(0); /* not recloned since last dump */ if (curDump->date > updatedate) { dparamsPtr->curVolumeStatus = DUMP_NODUMP; /* not modified since last dump */ ERROR_EXIT(0); } /* Start the volserver transaction and dump */ rc = AFSVolTransCreate (fromconn, curDump->vid, curDump->partition, ITBusy, &fromtid); if (rc) ERROR_EXIT(rc); fromcall = rx_NewCall(fromconn); rc = StartAFSVolDump (fromcall, fromtid, curDump->date); if (rc) ERROR_EXIT(rc); dparamsPtr->curVolumeStatus = DUMP_PARTIAL; dparamsPtr->curVolStartPos = tapeInfoPtr->position; /* buffer is place in bufferBlock to write volume data. * butm_writeFileData() assumes the previous BUTM_HDRSIZE bytes * is available to write the tape block header. */ buffer = bufferBlock + BUTM_HDRSIZE; /* Dump one volume fragment at a time until we dump the full volume. * A volume with more than 1 fragment means the volume will 'span' * 2 or more tapes. */ for (fragmentNumber=1; !endofvolume; fragmentNumber++) { /*frag*/ rc = butm_WriteFileBegin(tapeInfoPtr); if (rc) { ErrorLog(1, taskId, rc, tapeInfoPtr->error, "Can't write FileBegin on tape\n"); ERROR_EXIT(rc); } indump = 1; /* first write to tape */ /* Create and Write the volume header */ makeVolumeHeader(&hostVolumeHeader, dparamsPtr, fragmentNumber); hostVolumeHeader.contd = ((fragmentNumber == 1) ? 0 : TC_VOLCONTD); volumeHeader_hton(&hostVolumeHeader, buffer); rc = butm_WriteFileData(tapeInfoPtr, buffer, 1, sizeof(hostVolumeHeader)); if (rc) { ErrorLog(1, taskId, rc, tapeInfoPtr->error, "Can't write VolumeHeader on tape\n"); ERROR_EXIT(rc); } bytesWritten = BUTM_BLOCKSIZE; /* Wrote one tapeblock */ tsize += bytesWritten; /* Start reading volume data, rx_Read(), and dumping to the tape * until we've dumped the entire volume (endofvolume == 1). We can * exit this loop early if we find we are close to the end of the * tape; in which case we dump the next fragment on the next tape. */ volBytesRead = 0; chunkSize = 0; fragmentvolume = 0; while (!endofvolume && !fragmentvolume) { /*w*/ bytesread = 0; /* Check for abort in the middle of writing data */ if (volBytesRead >= chunkSize) { chunkSize += BIGCHUNK; if ( checkAbortByTaskId(taskId) ) ABORT_EXIT(TC_ABORTEDBYREQUEST); /* set bytes dumped for backup */ lock_Status(); nodePtr->statusNodePtr->nKBytes = tapeInfoPtr->kBytes; unlock_Status(); } /* Determine how much data to read in upcoming RX_Read() call */ toread = dataSize; /* Check if we are close to the EOT. There should at least be some * data on the tape before it is switched. HACK: we have to split a * volume across tapes because the volume trailer says the dump * continues on the next tape (and not the filemark). This could * result in a volume starting on one tape (no volume data dumped) and * continued on the next tape. It'll work, just requires restore to * switch tapes. This allows many small volumes (<16K) to be dumped. */ kRemaining = butm_remainingKSpace(tapeInfoPtr); if ( (kRemaining < tc_KEndMargin) && (volBytesRead || (tapeInfoPtr->position > (isafile?3:2))) ) { fragmentvolume = 1; } /* Guess at how much data to read. So we don't write off end of tape */ if (kRemaining < (tapeblocks * 16)) { if (kRemaining < 0) { toread = BUTM_BLKSIZE; } else { toread = ((kRemaining/16) + 1) * BUTM_BLKSIZE; if (toread > dataSize) toread = dataSize; } } /* Read some volume data. */ if (fragmentvolume) { bytesread = 0; } else { bytesread = rx_Read(fromcall, buffer, toread); volBytesRead += bytesread; if (bytesread != toread) { /* Make sure were at end of volume and not a communication error */ rc = rx_Error(fromcall); if (rc) ERROR_EXIT(rc); endofvolume = 1; } } if (fragmentvolume || endofvolume) { /* Create a volume trailer appending it to this data block */ makeVolumeHeader(&hostVolumeHeader, dparamsPtr, fragmentNumber); hostVolumeHeader.contd = (endofvolume ? 0 : TC_VOLCONTD); hostVolumeHeader.magic = TC_VOLENDMAGIC; hostVolumeHeader.endTime = (endofvolume ? time(0) : 0); volumeHeader_hton(&hostVolumeHeader, &buffer[bytesread]); bytesread += sizeof(hostVolumeHeader); } /* Write the datablock out */ /* full data buffer - write it to tape */ rc = butm_WriteFileData(tapeInfoPtr, buffer, tapeblocks, bytesread); if (rc) { ErrorLog(1, taskId, rc, tapeInfoPtr->error, "Can't write VolumeData on tape\n"); ERROR_EXIT(rc); } bytesWritten = tapeblocks * BUTM_BLOCKSIZE; tsize += bytesWritten; /* Display a status line every statusSize or at end of volume */ if ( statusSize && ((tsize >= statuscount) || endofvolume || fragmentvolume) ) { time_t t = time(0); struct tm tm; localtime_r(&t, &tm); printf("%02d:%02d:%02d: Task %u: %u KB: %s: %u B\n", tm.tm_hour, tm.tm_min, tm.tm_sec, taskId, tapeInfoPtr->kBytes, hostVolumeHeader.volumeName, tsize); statuscount = tsize + statusSize; } } /*w*/ /* End the dump before recording it in BUDB as successfully dumped */ rc = butm_WriteFileEnd(tapeInfoPtr); indump = 0; if (rc) { ErrorLog(1, taskId, rc, tapeInfoPtr->error, "Can't write FileEnd on tape\n"); ERROR_EXIT(rc); } /* Record in BUDB the volume fragment as succcessfully dumped */ volumeFlags = (( fragmentNumber == 1 ) ? BUDB_VOL_FIRSTFRAG : 0); if (endofvolume) volumeFlags |= BUDB_VOL_LASTFRAG; rc = addVolume(0, dparamsPtr->databaseDumpId, dparamsPtr->tapeName, nodePtr->dumps[dparamsPtr->curVolume].name, nodePtr->dumps[dparamsPtr->curVolume].vid, nodePtr->dumps[dparamsPtr->curVolume].cloneDate, dparamsPtr->curVolStartPos, volBytesRead, (fragmentNumber-1), volumeFlags); if (rc) ABORT_EXIT(rc); /* If haven't finished dumping the volume, end this * tape and get the next tape. */ if (!endofvolume) { /* Write an EOT marker. * Log the error but ignore it since the dump is effectively done. * Scantape will detect continued volume and not read the EOT. */ rc = butm_WriteEOT(tapeInfoPtr); if (rc) TapeLog(1, taskId, rc, tapeInfoPtr->error, "Warning: Can't write End-Of-Dump on tape\n"); /* Unmount the tape */ unmountTape(taskId, tapeInfoPtr); /* Tell the database the tape is complete (and ok) */ rc = finishTape(&dparamsPtr->tape, dparamsPtr->tapeInfoPtr->kBytes + (dparamsPtr->tapeInfoPtr->nBytes ? 1 : 0)); if (rc) ABORT_EXIT(rc); /* get the next tape. Prompt, mount, and add it into the database */ dparamsPtr->tapeSeq++; rc = getDumpTape(dparamsPtr, 1, 0); /* interactive - no append */ if (rc) ABORT_EXIT(rc); dparamsPtr->curVolStartPos = tapeInfoPtr->position; } } /*frag*/ dparamsPtr->curVolumeStatus = DUMP_SUCCESS; error_exit: /* * If we hit the end, see if this is the first volume on the tape or not. * Also, mark the tape as finished if the tape contains other dumps. */ if (HITEOT(code)) { ErrorLog(2, taskId, code, tapeInfoPtr->error, "Warning: Dump (%s) hit end-of-tape inferred\n", nodePtr->dumpSetName); if (tapeInfoPtr->position == 2) { dparamsPtr->curVolumeStatus = DUMP_NORETRYEOT; } else { dparamsPtr->curVolumeStatus = DUMP_RETRY; rc = finishTape(&dparamsPtr->tape, dparamsPtr->tapeInfoPtr->kBytes + (dparamsPtr->tapeInfoPtr->nBytes ? 1 : 0)); if (rc) ABORT_EXIT(rc); } } /* * This is used when an error occurs part way into a volume dump. Clean * the tape state by writing an FileEnd mark. Forgo this action if we hit * the end of tape. */ else if (indump) { rc = butm_WriteFileEnd(tapeInfoPtr); indump = 0; if (rc) { ErrorLog(1, taskId, rc, tapeInfoPtr->error, "Can't write FileEnd on tape\n"); } } if (fromcall) { rc = rx_EndCall (fromcall, 0); if (!code) code = rc; } if (fromtid) { afs_int32 rcode; rc = AFSVolEndTrans (fromconn, fromtid, &rcode); if (!code) code = (rc ? rc : rcode); } return(code); abort_exit: dparamsPtr->curVolumeStatus = DUMP_FAILED; ERROR_EXIT(code); } afs_int32 xbsaDumpVolume(curDump, dparamsPtr) struct tc_dumpDesc *curDump; struct dumpRock *dparamsPtr; { #ifdef xbsa struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr; struct dumpNode *nodePtr = dparamsPtr->node; char *buffer = bufferBlock; afs_int32 taskId = nodePtr->taskID; afs_int32 rc, code = 0; afs_int32 toread; afs_uint32 volBytesRead; afs_uint32 chunkSize; afs_int32 bytesread; /* rx reads */ int endofvolume=0; /* Have we read all volume data */ int begindump=0, indump=0; /* if dump transaction started; if dumping data */ struct volumeHeader hostVolumeHeader; struct rx_call *fromcall = (struct rx_call *)0; struct rx_connection *fromconn; afs_int32 updatedate, fromtid = 0; volEntries volumeInfo; afs_int32 bytesWritten; afs_uint32 statuscount=statusSize, tsize=0, esize; afs_hyper_t estSize; char dumpIdStr[XBSA_MAX_OSNAME]; char volumeNameStr[XBSA_MAX_PATHNAME]; static char *dumpDescription = "AFS volume dump"; static char *objectDescription = "XBSA - butc"; dparamsPtr->curVolumeStatus = DUMP_NOTHING; fromconn = Bind(htonl(curDump->hostAddr)); /* get connection to the server */ /* Determine when the volume was last cloned and updated */ volumeInfo.volEntries_val = (volintInfo *)0; volumeInfo.volEntries_len = 0; rc = AFSVolListOneVolume(fromconn, curDump->partition, curDump->vid, &volumeInfo); if (rc) ERROR_EXIT(rc); updatedate = volumeInfo.volEntries_val[0].updateDate; curDump->cloneDate = ((curDump->vtype == RWVOL) ? time(0) : volumeInfo.volEntries_val[0].creationDate); /* Get the volume size (in KB) and increase by 25%. Then set as a hyper */ esize = volumeInfo.volEntries_val[0].size; esize += (esize/4)+1; if (curDump->date >= curDump->cloneDate) ERROR_EXIT(0); /* not recloned since last dump */ if (curDump->date > updatedate) { dparamsPtr->curVolumeStatus = DUMP_NODUMP; /* not modified since last dump */ ERROR_EXIT(0); } /* Start a new XBSA Transaction */ rc = xbsa_BeginTrans(&butxInfo); if (rc != XBSA_SUCCESS) { ErrorLog(1, taskId, rc, 0, "Unable to create a new transaction\n"); ERROR_EXIT(rc); } begindump = 1; /* Will need to do an xbsa_EndTrans */ /* Start the volserver transaction and dump. Once started, the * volume status is "partial dump". Also, the transaction with * the volserver is idle until the first read. An idle transaction * will time out in 600 seconds. After the first rx_Read, * the transaction is not idle. See GCTrans(). */ rc = AFSVolTransCreate (fromconn, curDump->vid, curDump->partition, ITBusy, &fromtid); if (rc) ERROR_EXIT(rc); fromcall = rx_NewCall(fromconn); rc = StartAFSVolDump (fromcall, fromtid, curDump->date); if (rc) ERROR_EXIT(rc); dparamsPtr->curVolumeStatus = DUMP_PARTIAL; dparamsPtr->curVolStartPos = tapeInfoPtr->position; /* Tell XBSA what the name and size of volume to write */ strcpy(dumpIdStr, butcdumpIdStr); /* "backup_afs_volume_dumps" */ sprintf(volumeNameStr, "/%d", dparamsPtr->databaseDumpId); strcat(volumeNameStr, "/"); strcat(volumeNameStr, curDump->name); /* / */ hset32(estSize, esize); hshlft(estSize, 10); /* Multiply by 1024 so its in KB */ rc = xbsa_WriteObjectBegin(&butxInfo, dumpIdStr, volumeNameStr, xbsalGName, estSize, dumpDescription, objectDescription); if (rc != XBSA_SUCCESS) { ErrorLog(1, taskId, rc, 0, "Unable to begin writing of the fileset data to the server\n"); ERROR_EXIT(rc); } indump = 1; /* Will need to do an xbsa_WriteObjectEnd */ /* Create and Write the volume header */ makeVolumeHeader(&hostVolumeHeader, dparamsPtr, 1); hostVolumeHeader.contd = 0; volumeHeader_hton(&hostVolumeHeader, buffer); rc = xbsa_WriteObjectData(&butxInfo, buffer, sizeof(struct volumeHeader), &bytesWritten); if (rc != XBSA_SUCCESS) { ErrorLog(1, taskId, rc, 0, "Unable to write VolumeHeader data to the server\n"); ERROR_EXIT(rc); } /* There is a bug in the ADSM library where the bytesWritten is * not filled in, so we set it as correct anyway. */ bytesWritten = sizeof(struct volumeHeader); if (bytesWritten != sizeof(struct volumeHeader)) { ErrorLog(1, taskId, rc, 0, "The size of VolumeHeader written (%d) does not equal its actual size (%d)\n", bytesWritten, sizeof(struct volumeHeader)); ERROR_EXIT(TC_INTERNALERROR); } incSize(tapeInfoPtr, sizeof(struct volumeHeader)); /* Increment amount we've written */ tsize += bytesWritten; /* Start reading volume data, rx_Read(), and dumping to the tape * until we've dumped the entire volume (endofvolume == 1). */ volBytesRead = 0; chunkSize = 0; while (!endofvolume) { /*w*/ bytesread = 0; /* Check for abort in the middle of writing data */ if (volBytesRead >= chunkSize) { chunkSize += BIGCHUNK; if ( checkAbortByTaskId(taskId) ) ABORT_EXIT(TC_ABORTEDBYREQUEST); /* set bytes dumped for backup */ lock_Status(); nodePtr->statusNodePtr->nKBytes = tapeInfoPtr->kBytes; unlock_Status(); } /* Determine how much data to read in upcoming RX_Read() call */ toread = dataSize; /* Read some volume data. */ bytesread = rx_Read(fromcall, buffer, toread); volBytesRead += bytesread; if (bytesread != toread) { afs_int32 rcode; /* Make sure were at end of volume and not a communication error */ rc = rx_Error(fromcall); if (rc) ERROR_EXIT(rc); endofvolume = 1; /* Create a volume trailer appending it to this data block (if not XBSA) */ makeVolumeHeader(&hostVolumeHeader, dparamsPtr, 1); hostVolumeHeader.contd = 0; hostVolumeHeader.magic = TC_VOLENDMAGIC; hostVolumeHeader.endTime = time(0); volumeHeader_hton(&hostVolumeHeader, &buffer[bytesread]); bytesread += sizeof(hostVolumeHeader); /* End the dump and transaction with the volserver. We end it now, before * we make the XBSA call because if XBSA blocks, we could time out on the * volserver (After last read, the transaction with the volserver is idle). */ rc = rx_EndCall (fromcall, 0); fromcall = 0; if (rc) ERROR_EXIT(rc); rc = AFSVolEndTrans (fromconn, fromtid, &rcode); fromtid = 0; if (rc) ERROR_EXIT(rc); } /* Write the datablock out */ rc = xbsa_WriteObjectData(&butxInfo, buffer, bytesread, &bytesWritten); if (rc != XBSA_SUCCESS) { ErrorLog(1, taskId, rc, 0, "Unable to write data to the server\n"); ERROR_EXIT(rc); } /* There is a bug in the ADSM library where the bytesWritten is * not filled in, so we set it as correct anyway. */ bytesWritten = bytesread; if (bytesWritten != bytesread) { ErrorLog(1, taskId, rc, 0, "The size of data written (%d) does not equal size read (%d)\n", bytesWritten, bytesread); ERROR_EXIT(TC_INTERNALERROR); } incSize(tapeInfoPtr, bytesread); /* Increment amount we've written */ tsize += bytesWritten; /* Display a status line every statusSize or at end of volume */ if ( statusSize && ((tsize >= statuscount) || endofvolume) ) { time_t t = time(0); struct tm tm; localtime_r(&t, &tm); printf("%02d:%02d:%02d: Task %u: %u KB: %s: %u B\n", tm.tm_hour, tm.tm_min, tm.tm_sec, taskId, tapeInfoPtr->kBytes, hostVolumeHeader.volumeName, tsize); statuscount = tsize + statusSize; } } /*w*/ /* End the XBSA transaction before recording it in BUDB as successfully dumped */ rc = xbsa_WriteObjectEnd(&butxInfo); indump = 0; if (rc != XBSA_SUCCESS) { ErrorLog(1, taskId, rc, 0, "Unable to terminate writing of the volume data to the server"); ERROR_EXIT(rc); } rc = xbsa_EndTrans(&butxInfo); begindump = 0; tapeInfoPtr->position++; if (rc != XBSA_SUCCESS) { ErrorLog(1, taskId, rc, 0, "Unable to terminate the current transaction"); ERROR_EXIT(rc); } /* Record in BUDB the volume fragment as succcessfully dumped */ rc = addVolume(0, dparamsPtr->databaseDumpId, dparamsPtr->tapeName, nodePtr->dumps[dparamsPtr->curVolume].name, nodePtr->dumps[dparamsPtr->curVolume].vid, nodePtr->dumps[dparamsPtr->curVolume].cloneDate, dparamsPtr->curVolStartPos, volBytesRead, 0/*frag0*/, (BUDB_VOL_FIRSTFRAG | BUDB_VOL_LASTFRAG)); if (rc) ABORT_EXIT(rc); dparamsPtr->curVolumeStatus = DUMP_SUCCESS; error_exit: /* Cleanup after an error occurs part way into a volume dump */ if (fromcall) { rc = rx_EndCall (fromcall, 0); if (!code) code = rc; } if (fromtid) { afs_int32 rcode; rc = AFSVolEndTrans (fromconn, fromtid, &rcode); if (!code) code = (rc ? rc : rcode); } /* If this dump failed, what happens to successive retries * of the volume? How do they get recorded in the XBSA database * (overwritten)? If not, we don't record this in the BUDB database * so it will not be removed when we delete the dump. What to do? * Also if the volume was never recorded in the DB (partial dump). */ if (indump) { /* End the Write */ rc = xbsa_WriteObjectEnd(&butxInfo); indump = 0; if (rc != XBSA_SUCCESS) { ErrorLog(1, taskId, rc, 0, "Unable to terminate writing of the volume data to the server"); } tapeInfoPtr->position++; } if (begindump) { /* End the XBSA Transaction */ rc = xbsa_EndTrans(&butxInfo); begindump = 0; if (rc != XBSA_SUCCESS) { ErrorLog(1, taskId, rc, 0, "Unable to terminate the current transaction"); } } return(code); abort_exit: dparamsPtr->curVolumeStatus = DUMP_FAILED; ERROR_EXIT(code); #endif } #ifdef AFS_DEC_ENV #define HOSTADDR(sockaddr) (sockaddr)->sin_addr.S_un.S_addr #else #define HOSTADDR(sockaddr) (sockaddr)->sin_addr.s_addr #endif /* dumpPass * Go through the list of volumes to dump, dumping each one. The action * taken when a volume dump fails, depends on the passNumber. At minimum, * the failed volume is remembered. * notes: * flushSavedEntries - inconsistent treatment for errors. What should * be done for user aborts? */ afs_int32 dumpPass(dparamsPtr, passNumber) struct dumpRock *dparamsPtr; int passNumber; { struct dumpNode *nodePtr = dparamsPtr->node; struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr; afs_int32 taskId = nodePtr->taskID; struct tc_dumpDesc *curDump; int action, e; afs_int32 code = 0, tcode, dvcode; char ch; char retryPrompt(); struct vldbentry vldbEntry; struct sockaddr_in server; afs_int32 tapepos; TapeLog(2, taskId, 0, 0, "Starting pass %d\n", passNumber); /* while there are more volumes to dump */ for (dparamsPtr->curVolume = 0; dparamsPtr->curVolume < nodePtr->arraySize; dparamsPtr->curVolume++) { /*w*/ curDump = &nodePtr->dumps[dparamsPtr->curVolume]; if (curDump->hostAddr == 0) continue; /* set name of current volume being dumped */ lock_Status(); strcpy(nodePtr->statusNodePtr->volumeName, curDump->name); unlock_Status(); /* Determine location of the volume. * In case the volume moved has moved. */ if (passNumber > 1) { /*pass*/ tcode = bc_GetEntryByID(cstruct, curDump->vid, curDump->vtype, &vldbEntry); if (tcode) { ErrorLog(0, taskId, tcode, 0, "Volume %s (%u) failed - Can't find volume in VLDB\n", curDump->name, curDump->vid); curDump->hostAddr = 0; dparamsPtr->volumesFailed++; continue; } switch (curDump->vtype) { case BACKVOL: if ( !(vldbEntry.flags & BACK_EXISTS) ) { ErrorLog(0, taskId, 0, 0, "Volume %s (%u) failed - Backup volume no longer exists\n", curDump->name, curDump->vid); curDump->hostAddr = 0; dparamsPtr->volumesFailed++; continue; } /* Fall into RWVOL case */ case RWVOL: for (e=0; ehostAddr == vldbEntry.serverNumber[e] ) && (curDump->partition == vldbEntry.serverPartition[e]) ) break; } if (e >= vldbEntry.nServers) { /* Didn't find RO volume */ for (e=0; ename, curDump->vid); curDump->hostAddr = 0; continue; break; } if (e >=vldbEntry.nServers) { ErrorLog(0, taskId, 0, 0, "Volume %s (%u) failed - Can't find volume entry in VLDB\n", curDump->name, curDump->vid); curDump->hostAddr = 0; dparamsPtr->volumesFailed++; continue; } /* Remember the server and partition the volume exists on */ bzero (&server, sizeof(server)); server.sin_addr.s_addr = vldbEntry.serverNumber[e]; server.sin_port = 0; server.sin_family = AF_INET; curDump->hostAddr = HOSTADDR(&server); curDump->partition = vldbEntry.serverPartition[e]; /* Determine date from which to do an incremental dump */ if (nodePtr->parent) { tcode = bcdb_FindClone(nodePtr->parent, curDump->name, &curDump->date); if (tcode) curDump->date = 0; } else { curDump->date = 0; /* do a full dump */ } } /*pass*/ if ( checkAbortByTaskId(taskId) ) ERROR_EXIT(TC_ABORTEDBYREQUEST); /* Establish connection to volume - UV_ routine expects * host address in network order */ if (CONF_XBSA) { dvcode = xbsaDumpVolume(curDump, dparamsPtr); } else { dvcode = dumpVolume(curDump, dparamsPtr); } action = dparamsPtr->curVolumeStatus; /* Flush volume and tape entries to the database */ tcode = flushSavedEntries(action); if (tcode) ERROR_EXIT(tcode); switch (action) { case DUMP_SUCCESS: TapeLog(1, taskId, 0, 0, "Volume %s (%u) successfully dumped\n", curDump->name, curDump->vid); if (dvcode) ErrorLog(1, taskId, dvcode, 0, "Warning: Termination processing error on volume %s (%u)\n", curDump->name, curDump->vid); curDump->hostAddr = 0; dparamsPtr->volumesDumped++; break; case DUMP_PARTIAL: case DUMP_NOTHING: if (action == DUMP_PARTIAL) { ErrorLog(1, taskId, dvcode, 0, "Volume %s (%u) failed - partially dumped\n", curDump->name, curDump->vid); } else if (dvcode) { ErrorLog(0, taskId, dvcode, 0, "Volume %s (%u) failed\n", curDump->name, curDump->vid); } else { ErrorLog(0, taskId, dvcode, 0, "Volume %s (%u) not dumped - has not been re-cloned since last dump\n", curDump->name, curDump->vid); } if (passNumber == maxpass) { if (!queryoperator) ch = 'o'; else ch = retryPrompt(curDump->name, curDump->vid, taskId); switch ( ch ) { case 'r': /* retry */ dparamsPtr->curVolume--; /* redump this volume */ continue; break; case 'o': /* omit */ ErrorLog(1, taskId, 0, 0, "Volume %s (%u) omitted\n", curDump->name, curDump->vid); dparamsPtr->volumesFailed++; break; case 'a': /* abort */ TapeLog(1, taskId, 0, 0, "Dump aborted\n"); ERROR_EXIT(TC_ABORTEDBYREQUEST); break; default: ERROR_EXIT(TC_INTERNALERROR); break; } } break; case DUMP_RETRY: TapeLog(1, taskId, dvcode, 0, "Volume %s (%u) hit end-of-tape inferred - will retry on next tape\n", curDump->name, curDump->vid); /* Get the next tape */ unmountTape(taskId, tapeInfoPtr); dparamsPtr->tapeSeq++; tcode = getDumpTape(dparamsPtr, 1, 0); /* interactive - no appends */ if (tcode) ERROR_EXIT(tcode); dparamsPtr->curVolume--; /* redump this volume */ continue; break; case DUMP_NORETRYEOT: ErrorLog(1, taskId, 0, 0, "Volume %s (%u) failed - volume larger than tape\n", curDump->name, curDump->vid); /* rewrite the label on the tape - rewind - no need to switch tapes */ tcode = butm_Create(tapeInfoPtr, &dparamsPtr->tapeLabel, 1); if (tcode) { ErrorLog(0, taskId, tcode, tapeInfoPtr->error, "Can't relabel tape\n"); unmountTape(taskId, tapeInfoPtr); tcode = getDumpTape(dparamsPtr, 1, 0); /* interactive - no appends */ if (tcode) ERROR_EXIT(tcode); } else { /* Record the tape in database */ tapepos = tapeInfoPtr->position; tcode = useTape(&dparamsPtr->tape, dparamsPtr->databaseDumpId, dparamsPtr->tapeName, (dparamsPtr->tapeSeq + dparamsPtr->dump.tapes.b), dparamsPtr->tapeLabel.useCount, dparamsPtr->tapeLabel.creationTime, dparamsPtr->tapeLabel.expirationDate, tapepos); } curDump->hostAddr = 0; dparamsPtr->volumesFailed++; break; case DUMP_NODUMP: TapeLog(1, taskId, dvcode, 0, "Volume %s (%u) not dumped - has not been modified since last dump\n", curDump->name, curDump->vid); curDump->hostAddr = 0; dparamsPtr->volumesNotDumped++; break; default: ErrorLog(1, taskId, dvcode, 0, "Volume %s (%u) failed\n", curDump->name, curDump->vid); ERROR_EXIT(dvcode); break; } } /*w*/ error_exit: /* check if we terminated while processing a volume */ if (dparamsPtr->curVolume < nodePtr->arraySize) { TapeLog(2, taskId, 0, 0, "Terminated while processing Volume %s (%u)\n", curDump->name, curDump->vid); } /* print a summary of this pass */ TapeLog(2, taskId, 0, 0, "End of pass %d: Volumes remaining = %d\n", passNumber, nodePtr->arraySize - (dparamsPtr->volumesDumped + dparamsPtr->volumesFailed + dparamsPtr->volumesNotDumped)); return(code); } Dumper(nodePtr) struct dumpNode *nodePtr; { struct dumpRock dparams; struct butm_tapeInfo tapeInfo; int pass; int action; afs_int32 taskId; afs_int32 code = 0; /* for volume setup */ struct tc_dumpDesc *dumpDescPtr; int i; int failedvolumes = 0; int dumpedvolumes = 0; int nodumpvolumes = 0; char strlevel[5]; char msg[20]; char finishedMsg1[50]; char finishedMsg2[50]; time_t startTime=0; time_t endTime=0; afs_int32 allocbufferSize; extern struct deviceSyncNode *deviceLatch; extern struct tapeConfig globalTapeConfig; extern afs_int32 createDump(); taskId = nodePtr->taskID; /* Get task Id */ setStatus(taskId, DRIVE_WAIT); EnterDeviceQueue(deviceLatch); clearStatus(taskId, DRIVE_WAIT); printf("\n\n"); TapeLog(2, taskId, 0, 0, "Dump %s\n", nodePtr->dumpSetName); /* setup the dump parameters */ bzero(&dparams, sizeof(dparams)); dparams.node = nodePtr; dparams.tapeInfoPtr = &tapeInfo; dlqInit(&savedEntries); if (!CONF_XBSA) { /* Instantiate the tape module */ tapeInfo.structVersion = BUTM_MAJORVERSION; code = butm_file_Instantiate(&tapeInfo, &globalTapeConfig); if (code) { ErrorLog(0, taskId, code, tapeInfo.error, "Can't initialize the tape module\n"); ERROR_EXIT(code); } } /* check if abort requested while waiting on device latch */ if ( checkAbortByTaskId(taskId) ) ERROR_EXIT(TC_ABORTEDBYREQUEST); /* Are there volumes to dump */ if (nodePtr->arraySize == 0) { TLog(taskId, "Dump (%s), no volumes to dump\n", nodePtr->dumpSetName); ERROR_EXIT(0); } /* Allocate a buffer for the dumps. Leave room for header and vol-trailer. * dataSize is amount of data to read in each rx_Read() call. */ if (CONF_XBSA) { /* XBSA dumps have not header */ dataSize = BufferSize; allocbufferSize = dataSize + sizeof(struct volumeHeader); } else { tapeblocks = BufferSize / BUTM_BLOCKSIZE; /* # of 16K tapeblocks */ dataSize = (tapeblocks * BUTM_BLKSIZE); allocbufferSize = BUTM_HDRSIZE + dataSize + sizeof(struct volumeHeader); } bufferBlock = (char *)0; bufferBlock = malloc(allocbufferSize); if (!bufferBlock) { ErrorLog(0, taskId, TC_NOMEMORY, 0, "Can't allocate BUFFERSIZE for dumps\n"); ERROR_EXIT(TC_NOMEMORY); } /* Determine the dumpid of the most recent dump of this volumeset and dumplevel * Used when requesting a tape. Done now because once we create the dump, the * routine will then find the newly created dump. */ sprintf(strlevel, "%d", nodePtr->level); code = bcdb_FindLatestDump(nodePtr->volumeSetName, strlevel, &dparams.lastDump); if (code) { if (code != BUDB_NODUMPNAME) { ErrorLog(0, taskId, code, 0, "Can't read backup database\n"); ERROR_EXIT(code); } bzero(&dparams.lastDump, sizeof(dparams.lastDump)); } code = createDump(&dparams); /* enter dump into database */ if (code) { ErrorLog(0, taskId, code, 0, "Can't create dump in database\n"); ERROR_EXIT(code); } TLog(taskId, "Dump %s (DumpID %u)\n", nodePtr->dumpSetName, dparams.databaseDumpId); if (!CONF_XBSA) { /* mount the tape and write its label */ code = getDumpTape(&dparams, autoQuery, nodePtr->doAppend); } else { /* Create a dummy tape to satisfy backup databae */ code = getXBSATape(&dparams); tapeInfo.position = 1; } if (code) { /* If didn't write the label, remove dump from the database */ if ( !dparams.wroteLabel ) { i = bcdb_deleteDump(dparams.databaseDumpId, 0, 0, 0); if ( i && (i != BUDB_NOENT) ) ErrorLog(1, taskId, i, 0, "Warning: Can't delete dump %u from database\n", dparams.databaseDumpId); else dparams.databaseDumpId = 0; } ERROR_EXIT(code); /* exit with code from getTape */ } startTime = time(0); for (pass = 1; pass <= maxpass; pass++) { lastPass = (pass == maxpass); code = dumpPass(&dparams, pass); if (code) ERROR_EXIT(code); /* if no failed volumes, we're done */ if ((dparams.volumesDumped + dparams.volumesFailed + dparams.volumesNotDumped) == nodePtr->arraySize) break; } /* * Log the error but ignore it since the dump is effectively done. * Scantape may assume another volume and ask for next tape. */ if (!CONF_XBSA) { code = butm_WriteEOT(&tapeInfo); if (code) TapeLog(taskId, code, tapeInfo.error, "Warning: Can't write end-of-dump on tape\n"); } code = finishTape(&dparams.tape, dparams.tapeInfoPtr->kBytes + (dparams.tapeInfoPtr->nBytes ? 1 : 0)); if (code) ERROR_EXIT(code); code = finishDump(&dparams.dump); if (code) ERROR_EXIT(code); action = dparams.curVolumeStatus; code = flushSavedEntries(action); if (code) ERROR_EXIT(code); error_exit: endTime = time(0); Bind(0); if (bufferBlock) free(bufferBlock); if (!CONF_XBSA) { unmountTape(taskId, &tapeInfo); } waitDbWatcher(); dumpedvolumes = dparams.volumesDumped; nodumpvolumes = dparams.volumesNotDumped; failedvolumes = nodePtr->arraySize - (dumpedvolumes + nodumpvolumes); /* pass back the number of volumes we failed to dump */ lock_Status(); nodePtr->statusNodePtr->volsFailed = failedvolumes; unlock_Status(); lastPass = 1; /* In case we aborted */ DUMPNAME(finishedMsg1, nodePtr->dumpSetName, dparams.databaseDumpId); sprintf(finishedMsg2, "%d volumes dumped", dumpedvolumes); if (failedvolumes) { sprintf(msg, ", %d failed", failedvolumes); strcat(finishedMsg2, msg); } if (nodumpvolumes) { sprintf(msg, ", %d unchanged", nodumpvolumes); strcat(finishedMsg2, msg); } if (code == TC_ABORTEDBYREQUEST) { ErrorLog(0, taskId, 0, 0, "%s: Aborted by request. %s\n", finishedMsg1, finishedMsg2); clearStatus(taskId, ABORT_REQUEST); setStatus (taskId, ABORT_DONE); } else if (code) { ErrorLog(0, taskId, code, 0, "%s: Finished with errors. %s\n", finishedMsg1, finishedMsg2); setStatus(taskId, TASK_ERROR); } else { TLog(taskId, "%s: Finished. %s\n", finishedMsg1, finishedMsg2); } lastPass = 0; /* Record how long the dump took */ if (centralLogIO && startTime) { long timediff; afs_int32 hrs, min, sec, tmp; char line[1024]; struct tm tmstart, tmend; localtime_r(&startTime, &tmstart); localtime_r(&endTime, &tmend); timediff = (int)endTime - (int)startTime; hrs = timediff / 3600; tmp = timediff % 3600; min = tmp / 60; sec = tmp % 60; sprintf(line, "%-5d %02d/%02d/%04d %02d:%02d:%02d " "%02d/%02d/%04d %02d:%02d:%02d " "%02d:%02d:%02d " "%s %d of %d volumes dumped (%ld KB)\n", taskId, tmstart.tm_mon+1, tmstart.tm_mday, tmstart.tm_year+1900, tmstart.tm_hour, tmstart.tm_min, tmstart.tm_sec, tmend.tm_mon+1, tmend.tm_mday, tmend.tm_year+1900, tmend.tm_hour, tmend.tm_min, tmend.tm_sec, hrs, min, sec, nodePtr->volumeSetName, dumpedvolumes, dumpedvolumes+failedvolumes, dparams.tapeInfoPtr->kBytes+1); fwrite(line, strlen(line), 1, centralLogIO); fflush(centralLogIO); } setStatus(taskId, TASK_DONE); FreeNode(taskId); /* free the dump node */ LeaveDeviceQueue(deviceLatch); return(code); } #define BELLTIME 60 /* 60 seconds before a bell rings */ #define BELLCHAR 7 /* ascii for bell */ /* retryPrompt * prompt the user to decide how to handle a failed volume dump. The * volume parameters describe the volume that failed * entry: * volumeName - name of volume * volumeId - volume id * taskId - for job contrl * fn return: * character typed by user, one of r, o or a */ char retryPrompt(volumeName, volumeId, taskId) char *volumeName; afs_int32 volumeId; afs_uint32 taskId; { afs_int32 start; char ch; afs_int32 code = 0; setStatus(taskId, OPR_WAIT); printf("\nDump of volume %s (%u) failed\n\n", volumeName, volumeId); printf("Please select action to be taken for this volume\n"); again: printf("r - retry, try dumping this volume again\n"); printf("o - omit, this volume from this dump\n"); printf("a - abort, the entire dump\n"); while (1) { FFlushInput(stdin); putchar(BELLCHAR); fflush(stdout); start = time(0); while(1) { #ifdef AFS_PTHREAD_ENV code = GetResponseKey(5, &ch); /* ch stores key pressed */ #else code = LWP_GetResponseKey(5, &ch); /* ch stores key pressed */ #endif if (code == 1) break; /* input is available */ if ( checkAbortByTaskId(taskId) ) { clearStatus(taskId, OPR_WAIT); printf("This tape operation has been aborted by the coordinator\n"); return 'a'; } if (time(0) > start + BELLTIME) break; } /* otherwise, we should beep again, check for abort and go back, * since the GetResponseKey() timed out. */ if (code == 1) break; /* input is available */ } clearStatus(taskId, OPR_WAIT); if ( ch != 'r' && ch != 'o' && ch != 'a' ) { printf("Please select one of the 3 options, r, o or a\n"); goto again; } return ch; } /* For testing: it prints the tape label */ printTapeLabel(tl) struct butm_tapeLabel *tl; { printf("Tape Label\n"); printf(" structVersion = %d\n", tl->structVersion); printf(" creationTime = %u\n", tl->creationTime); printf(" expirationDate = %u\n", tl->expirationDate); printf(" AFSName = %s\n", tl->AFSName); printf(" cell = %s\n", tl->cell); printf(" dumpid = %d\n", tl->dumpid); printf(" useCount = %d\n", tl->useCount); printf(" comment = %s\n", tl->comment); printf(" pName = %s\n", tl->pName); printf(" size = %u\n", tl->size); printf(" dumpPath = %s\n", tl->dumpPath); } /* getXBSATape * Create a tape structure to be satisfy the backup database * even though we don't really use a tape with XBSA. */ getXBSATape(dparamsPtr) struct dumpRock *dparamsPtr; { struct dumpNode *nodePtr = dparamsPtr->node; struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr; struct butm_tapeLabel *tapeLabelPtr = &dparamsPtr->tapeLabel; afs_int32 code = 0; tc_MakeTapeName(dparamsPtr->tapeName, &nodePtr->tapeSetDesc, dparamsPtr->tapeSeq); GetNewLabel(tapeInfoPtr, ""/*pName*/, dparamsPtr->tapeName, tapeLabelPtr); strcpy(tapeLabelPtr->dumpPath, nodePtr->dumpName); tapeLabelPtr->dumpid = dparamsPtr->databaseDumpId; tapeLabelPtr->expirationDate = calcExpirationDate(nodePtr->tapeSetDesc.expType, nodePtr->tapeSetDesc.expDate, time(0)); /* printTapeLabel(tapeLabelPtr); For testing */ code = useTape(&dparamsPtr->tape, dparamsPtr->databaseDumpId, dparamsPtr->tapeName, (dparamsPtr->tapeSeq + dparamsPtr->dump.tapes.b), tapeLabelPtr->useCount, tapeLabelPtr->creationTime, tapeLabelPtr->expirationDate, 0 /*tape position*/); return(code); } /* getDumpTape * iterate until the desired tape (as specified by the dump structures) * is mounted. * entry: * interactiveFlag * 0 - assume the tape is there. Prompt if assumption false * 1 - prompt regardless */ getDumpTape(dparamsPtr, interactiveFlag, append) struct dumpRock *dparamsPtr; int interactiveFlag; afs_int32 append; { struct dumpNode *nodePtr = dparamsPtr->node; struct butm_tapeInfo *tapeInfoPtr = dparamsPtr->tapeInfoPtr; struct butm_tapeLabel *newTapeLabelPtr = &dparamsPtr->tapeLabel; char AFSTapeName[TC_MAXTAPENAMELEN]; afs_int32 taskId = nodePtr->taskID; struct butm_tapeLabel oldTapeLabel; struct budb_dumpEntry dumpEntry; struct budb_tapeEntry tapeEntry; struct budb_volumeEntry volEntry; Date oldTapeExpiration, expir; afs_int32 curTime; afs_int32 doAppend; afs_int32 code = 0; int askForTape, opcode; int tapecount = 1; char strlevel[5]; afs_int32 tapepos, lastpos; extern struct tapeConfig globalTapeConfig; extern struct udbHandleS udbHandle; extern afs_int32 BUDB_DeleteDump(); askForTape = interactiveFlag; dparamsPtr->wroteLabel = 0; /* Keep prompting for a tape until we get it right */ while (1) { /* What the name of the tape would be if not appending to it */ tc_MakeTapeName(AFSTapeName, &nodePtr->tapeSetDesc, dparamsPtr->tapeSeq); doAppend = append; if (askForTape) { code = PromptForTape((doAppend ? APPENDOPCODE : WRITEOPCODE), AFSTapeName, dparamsPtr->databaseDumpId, taskId, tapecount); if (code) ERROR_EXIT(code); } askForTape = 1; tapecount++; /* open the tape device */ code = butm_Mount(tapeInfoPtr, AFSTapeName); if (code) { TapeLog(0, taskId, code, tapeInfoPtr->error, "Can't open tape\n"); goto getNewTape; } /* Read the tape label */ code = butm_ReadLabel(tapeInfoPtr, &oldTapeLabel, 1); /* rewind */ if (code) { if (tapeInfoPtr->error) { ErrorLog(0, taskId, code, tapeInfoPtr->error, "Warning: Tape error while reading label (will proceed with dump)\n"); } bzero(&oldTapeLabel, sizeof(oldTapeLabel)); } /* Check if null tape. Prior 3.3, backup tapes have no dump id */ if ( (strcmp(oldTapeLabel.AFSName,"") == 0) && (oldTapeLabel.dumpid == 0) ) { if (doAppend) { TLog(taskId, "Dump not found on tape. Proceeding with initial dump\n"); doAppend = 0; } } else if (doAppend) /* appending */ { /* Check that we don't have a database dump tape */ if ( databaseTape(oldTapeLabel.AFSName) ) { char gotName[BU_MAXTAPELEN+32]; /* label does not match */ LABELNAME(gotName, &oldTapeLabel); TLog(taskId, "Can't append to database tape %s\n", gotName); goto getNewTape; } /* Verify that the tape is of version 4 (AFS 3.3) or greater */ if (oldTapeLabel.structVersion < TAPE_VERSION_4) { TLog(taskId, "Can't append: requires tape version %d or greater\n", TAPE_VERSION_4); goto getNewTape; } /* Verify that the last tape of the dump set is in the drive. * volEntry will be zeroed if last dump has no volume entries. */ code = bcdb_FindLastTape(oldTapeLabel.dumpid, &dumpEntry, &tapeEntry, &volEntry); if (code) { ErrorLog(0, taskId, code, 0, "Can't append: Can't find last volume of dumpId %u in database\n", oldTapeLabel.dumpid); printf("Please scan the dump in or choose another tape\n"); goto getNewTape; } lastpos = (volEntry.position ? volEntry.position : tapeEntry.labelpos); if (strcmp(TNAME(&oldTapeLabel),tapeEntry.name)) { char expName[BU_MAXTAPELEN+32], gotName[BU_MAXTAPELEN+32]; TAPENAME(expName, tapeEntry.name, oldTapeLabel.dumpid); LABELNAME(gotName, &oldTapeLabel); TLog(taskId, "Can't append: Last tape in dump-set is %s, label seen %s\n", expName, gotName); goto getNewTape; } /* After reading the tape label, we now know what it is */ strcpy (AFSTapeName, oldTapeLabel.AFSName); /* the real name */ strcpy (tapeInfoPtr->name, oldTapeLabel.AFSName); /* the real name */ /* Position after last volume on the tape */ code = butm_SeekEODump(tapeInfoPtr, lastpos); if (code) { ErrorLog(0, taskId, code, tapeInfoPtr->error, "Can't append: Can't position to end of dump on tape %s\n", tapeEntry.name); goto getNewTape; } /* Track size of tape - set after seek since seek changes the value */ tapeInfoPtr->kBytes = tapeEntry.useKBytes; } else /* not appending */ { afs_uint32 tapeid; afs_uint32 dmp, parent; struct budb_dumpEntry de, de2; /* Check if tape name is not what expected - null tapes are acceptable * Don't do check if the tape has a user defined label. */ if ( dump_namecheck && (strcmp(oldTapeLabel.pName,"")==0) ) { if ( strcmp(oldTapeLabel.AFSName,"") && /* not null tape */ strcmp(oldTapeLabel.AFSName,AFSTapeName) ) /* not expected name */ { TLog(taskId, "Tape label expected %s, label seen %s\n", AFSTapeName, oldTapeLabel.AFSName); goto getNewTape; } /* Check that we don't have a database dump tape */ if ( databaseTape(oldTapeLabel.AFSName) ) { /* label does not match */ TLog(taskId, "Tape label expected %s, can't dump to database tape %s\n", AFSTapeName, oldTapeLabel.AFSName); goto getNewTape; } } /* Verify the tape has not expired - only check if not appending */ if ( !tapeExpired(&oldTapeLabel) ) { TLog(taskId, "This tape has not expired\n"); goto getNewTape; } /* Given a tape dump with good data, verify we don't overwrite recent dumps * and also verify that the volume will be restorable - if not print warnings */ if (oldTapeLabel.dumpid) { /* Do not overwrite a tape that belongs to the dump's dumpset */ tapeid = (dparamsPtr->initialDumpId ? dparamsPtr->initialDumpId : dparamsPtr->databaseDumpId); if (oldTapeLabel.dumpid == tapeid) { ErrorLog(0, taskId, 0, 0, "Can't overwrite tape containing the dump in progress\n"); goto getNewTape; } /* Since the dumpset on this tape will be deleted from database, check if * any of the dump's parent-dumps are on this tape. */ for (dmp=nodePtr->parent; dmp; dmp=de.parent) { code = bcdb_FindDumpByID(dmp, &de); if (code) { ErrorLog(0, taskId, 0, 0, "Warning: Can't find parent dump %u in backup database\n", dmp); break; } tapeid = (de.initialDumpID ? de.initialDumpID : de.id); if (oldTapeLabel.dumpid == tapeid) { ErrorLog(0, taskId, 0, 0, "Can't overwrite the parent dump %s (DumpID %u)\n", de.name, de.id); goto getNewTape; } } /* Since the dumpset on this tape will be deleted from database, check if * any of the dumps in this dumpset are most-recent-dumps. */ for (dmp=oldTapeLabel.dumpid; dmp; dmp=de.appendedDumpID) { if (dmp == dparamsPtr->lastDump.id) { bcopy(&dparamsPtr->lastDump, &de, sizeof(de)); bcopy(&dparamsPtr->lastDump, &de2, sizeof(de2)); } else { code = bcdb_FindDumpByID(dmp, &de); if (code) break; sprintf(strlevel, "%d", de.level); code = bcdb_FindLatestDump(de.volumeSetName, strlevel, &de2); if (code) continue; } /* If dump on the tape is the latest dump at this level */ if (de.id == de2.id) { if (strcmp(DUMP_TAPE_NAME,de2.name) == 0) { ErrorLog(0, taskId, 0, 0, "Warning: Overwriting most recent dump %s (DumpID %u)\n", de.name, de.id); } else { ErrorLog(0, taskId, 0, 0, "Warning: Overwriting most recent dump of the '%s' volumeset: %s (DumpID %u)\n", de.volumeSetName, de.name, de.id); } } } } /* if (oldTapeLabel.dumpid) */ } /* else not appending */ /* * Now have the right tape. Create a new label for the tape * Appended labels have the dump's dumpId - labels at beginnings of * tape have the initial dump's dumpId. * Appended labels do not increment the useCount. * Labels at beginnings of tape use the most future expiration of the dump set. */ GetNewLabel(tapeInfoPtr, oldTapeLabel.pName, AFSTapeName, newTapeLabelPtr); strcpy(newTapeLabelPtr->dumpPath, nodePtr->dumpName); newTapeLabelPtr->expirationDate = calcExpirationDate(nodePtr->tapeSetDesc.expType, nodePtr->tapeSetDesc.expDate, time(0)); newTapeLabelPtr->dumpid = dparamsPtr->databaseDumpId; newTapeLabelPtr->useCount = oldTapeLabel.useCount; if (!doAppend) { newTapeLabelPtr->useCount++; if (dparamsPtr->initialDumpId) { newTapeLabelPtr->dumpid = dparamsPtr->initialDumpId; expir = ExpirationDate(dparamsPtr->initialDumpId); if (expir > newTapeLabelPtr->expirationDate) newTapeLabelPtr->expirationDate = expir; } } /* write the label on the tape - rewind if not appending and vice-versa */ code = butm_Create(tapeInfoPtr, newTapeLabelPtr, !doAppend); if (code) { char gotName[BU_MAXTAPELEN+32]; LABELNAME(gotName, newTapeLabelPtr); TapeLog(0, taskId, code, tapeInfoPtr->error, "Can't label tape as %s\n", gotName); goto getNewTape; } dparamsPtr->wroteLabel = 1; /* Remember we wrote the label */ tapepos = tapeInfoPtr->position-1; strcpy(dparamsPtr->tapeName, TNAME(newTapeLabelPtr)); /* If appending, set dumpentry in the database as appended. */ if (doAppend) { char gotName[BU_MAXTAPELEN+32]; nodePtr->tapeSetDesc.b = extractTapeSeq(AFSTapeName); dparamsPtr->dump.tapes.b = nodePtr->tapeSetDesc.b; dparamsPtr->initialDumpId = oldTapeLabel.dumpid; strcpy(nodePtr->tapeSetDesc.format, dumpEntry.tapes.format); code = bcdb_MakeDumpAppended(dparamsPtr->databaseDumpId, dparamsPtr->initialDumpId, nodePtr->tapeSetDesc.b); if (code) ErrorLog(2, taskId, code, 0, "Warning: Can't append dump %u to dump %u in database\n", dparamsPtr->databaseDumpId, dparamsPtr->initialDumpId); LABELNAME(gotName, &oldTapeLabel); TLog(taskId, "Appending dump %s (DumpID %u) to tape %s\n", nodePtr->dumpSetName, dparamsPtr->databaseDumpId, gotName); } /* If not appending, delete overwritten dump from the database */ else { if ( (oldTapeLabel.structVersion >= TAPE_VERSION_3) && oldTapeLabel.dumpid ) { code = bcdb_deleteDump(oldTapeLabel.dumpid, 0, 0, 0); if ( code && (code != BUDB_NOENT) ) ErrorLog(0, taskId, code, 0, "Warning: Can't delete old dump %u from database\n", oldTapeLabel.dumpid); } } code = useTape(&dparamsPtr->tape, dparamsPtr->databaseDumpId, dparamsPtr->tapeName, (dparamsPtr->tapeSeq + dparamsPtr->dump.tapes.b), newTapeLabelPtr->useCount, newTapeLabelPtr->creationTime, newTapeLabelPtr->expirationDate, tapepos); /* * The margin of space to check for end of tape is set to the * amount of space used to write an end-of-tape multiplied by 2. * The amount of space is size of a 16K volume trailer, a 16K File * End mark, its EOF marker, a 16K EODump marker, its EOF marker, * and up to two EOF markers done on close (3 16K blocks + 4 EOF * markers). */ tc_EndMargin = (3 * 16384 + 4 * globalTapeConfig.fileMarkSize) * 2; tc_KEndMargin = tc_EndMargin / 1024; break; getNewTape: unmountTape(taskId, tapeInfoPtr); } error_exit: return(code); } makeVolumeHeader(vhptr, dparamsPtr, fragmentNumber) struct volumeHeader *vhptr; struct dumpRock *dparamsPtr; int fragmentNumber; { struct dumpNode *nodePtr = dparamsPtr->node; struct tc_dumpDesc *curDump; afs_int32 code = 0; curDump = &nodePtr->dumps[dparamsPtr->curVolume]; bzero(vhptr, sizeof(*vhptr)); strcpy(vhptr->volumeName, curDump->name); vhptr->volumeID = curDump->vid; vhptr->cloneDate = curDump->cloneDate; vhptr->server = curDump->hostAddr; vhptr->part = curDump->partition; vhptr->from = curDump->date; vhptr->frag = fragmentNumber; vhptr->contd = 0; vhptr->magic = TC_VOLBEGINMAGIC; vhptr->dumpID = dparamsPtr->databaseDumpId; /* real dump id */ vhptr->level = nodePtr->level; vhptr->parentID = nodePtr->parent; vhptr->endTime = 0; vhptr->versionflags = CUR_TAPE_VERSION; strcpy(vhptr->dumpSetName, nodePtr->dumpSetName); strcpy(vhptr->preamble,"H++NAME#"); strcpy(vhptr->postamble,"T--NAME#"); error_exit: return (code); } volumeHeader_hton(hostPtr, netPtr) struct volumeHeader *hostPtr, *netPtr; { struct volumeHeader volHdr; strcpy(volHdr.preamble, hostPtr->preamble); strcpy(volHdr.postamble, hostPtr->postamble); strcpy(volHdr.volumeName, hostPtr->volumeName); strcpy(volHdr.dumpSetName, hostPtr->dumpSetName); volHdr.volumeID = htonl(hostPtr->volumeID); volHdr.server = htonl(hostPtr->server); volHdr.part = htonl(hostPtr->part); volHdr.from = htonl(hostPtr->from); volHdr.frag = htonl(hostPtr->frag); volHdr.magic = htonl(hostPtr->magic); volHdr.contd = htonl(hostPtr->contd); volHdr.dumpID = htonl(hostPtr->dumpID); volHdr.level = htonl(hostPtr->level); volHdr.parentID = htonl(hostPtr->parentID); volHdr.endTime = htonl(hostPtr->endTime); volHdr.versionflags = htonl(hostPtr->versionflags); volHdr.cloneDate = htonl(hostPtr->cloneDate); bcopy(&volHdr, netPtr, sizeof(struct volumeHeader)); } /* database related routines */ afs_int32 createDump(dparamsPtr) struct dumpRock *dparamsPtr; { struct dumpNode *nodePtr = dparamsPtr->node; struct budb_dumpEntry *dumpPtr; afs_int32 code = 0; dumpPtr = &dparamsPtr->dump; bzero(dumpPtr, sizeof(*dumpPtr)); /* id filled in by database */ dumpPtr->parent = nodePtr->parent; dumpPtr->level = nodePtr->level; dumpPtr->flags = 0; #ifdef xbsa if (CONF_XBSA) { if (xbsaType == XBSA_SERVER_TYPE_ADSM) { strcpy(dumpPtr->tapes.tapeServer, butxInfo.serverName); dumpPtr->flags = BUDB_DUMP_ADSM; } if (!(butxInfo.serverType & XBSA_SERVER_FLAG_MULTIPLE)) { /* The current server (API) doesn't provide the function required * to specify a server at startup time. For that reason, we can't * be sure that the server name supplied by the user in the user- * defined configuration file is correct. We set a flag here so * we know at restore time that the servername info in the backup * database may be incorrect. We will not allow a server switch * at that time, even if the server at restore time supports * multiple servers. */ dumpPtr->flags |= BUDB_DUMP_XBSA_NSS; } } #endif strcpy(dumpPtr->volumeSetName, nodePtr->volumeSetName); strcpy(dumpPtr->dumpPath, nodePtr->dumpName); strcpy(dumpPtr->name, nodePtr->dumpSetName); dumpPtr->created = 0; /* let database assign it */ dumpPtr->incTime = 0; /* not really used */ dumpPtr->nVolumes = 0; dumpPtr->initialDumpID = 0; dumpPtr->tapes.id = groupId; dumpPtr->tapes.b = 1; dumpPtr->tapes.maxTapes = 0; strcpy(dumpPtr->tapes.format, nodePtr->tapeSetDesc.format); /* principal filled in by database */ /* now call the database to create the entry */ code = bcdb_CreateDump(dumpPtr); if (code == 0) dparamsPtr->databaseDumpId = dumpPtr->id; return(code); } #ifdef xbsa /* InitToServer: * Initialize to a specific server. The first time, we remember the * server as the original server and go back to it each time we pass 0 * as the server. */ afs_int32 InitToServer(afs_int32 taskId, struct butx_transactionInfo *butxInfoP, char *server) { static char origserver[BSA_MAX_DESC]; static int init=0; afs_int32 rc, code=0; if (!init) { strcpy(origserver,""); init = 1; } if (!server) server = origserver; /* return to original server */ if (strcmp(server,"") == 0) return 0; /* No server, do nothing */ if (strcmp(butxInfoP->serverName,server) == 0) return 0; /* same server, do nothing */ if (strcmp(origserver,"") == 0) strcpy(origserver, server);/* remember original server */ if (strcmp(butxInfoP->serverName,"") != 0) { /* If already connected to a server, disconnect from it. * Check to see if our server does not support switching. */ if (!(butxInfo.serverType & XBSA_SERVER_FLAG_MULTIPLE)) { ErrorLog(0, taskId, TC_BADTASK, 0, "This version of XBSA libraries does not support switching " "from server %s to server %s\n", butxInfoP->serverName, server); return(TC_BADTASK); } rc = xbsa_Finalize(&butxInfo); if (rc != XBSA_SUCCESS) { ErrorLog(0, taskId, rc, 0, "InitToServer: Unable to terminate the connection to server %s\n", butxInfoP->serverName); ERROR_EXIT(rc); } } /* initialize to the new server */ rc = xbsa_Initialize(&butxInfo, xbsaObjectOwner, appObjectOwner, xbsaSecToken, server); if (rc != XBSA_SUCCESS) { ErrorLog(0, taskId, rc, 0, "InitToServer: Unable to initialize the XBSA library to server %s\n", server); ERROR_EXIT(rc); } error_exit: return(code); } /* DeleteDump * */ DeleteDump(ptr) struct deleteDumpIf *ptr; { afs_int32 taskId; afs_int32 rc, code=0; afs_uint32 dumpid; afs_int32 index, next, dbTime; budb_volumeList vl; struct budb_dumpEntry dumpEntry; char tapeName[BU_MAXTAPELEN]; char dumpIdStr[XBSA_MAX_OSNAME]; char volumeNameStr[XBSA_MAX_PATHNAME]; afs_int32 i; int intrans=0; int allnotfound=1, onenotfound=0; extern struct udbHandleS udbHandle; extern struct deviceSyncNode *deviceLatch; setStatus(taskId, DRIVE_WAIT); EnterDeviceQueue(deviceLatch); clearStatus(taskId, DRIVE_WAIT); dumpid = ptr->dumpID; taskId = ptr->taskId; /* Get task Id */ printf("\n\n"); TapeLog(2, taskId, 0, 0, "Delete Dump %u\n", dumpid); vl.budb_volumeList_len = 0; vl.budb_volumeList_val = 0; tapeName[0] = '\0'; /* Get the dump info for the dump we are deleting */ rc = bcdb_FindDumpByID(dumpid, &dumpEntry); if (rc) { ErrorLog(0, taskId, rc, 0, "Unable to locate dump ID %u in database\n", dumpid); setStatus(taskId, TASK_ERROR); ERROR_EXIT(rc); } /* we must make sure that we are configured with the correct type of * XBSA server for this dump delete! Only those dumped to an ADSM server. */ if ( (xbsaType == XBSA_SERVER_TYPE_ADSM) && !((dumpEntry.flags & (BUDB_DUMP_ADSM | BUDB_DUMP_BUTA))) ) { ErrorLog(0, taskId, TC_BADTASK, 0, "The dump %u requested for deletion is incompatible with this instance of butc\n", dumpid); setStatus(taskId, TASK_ERROR); ERROR_EXIT(TC_BADTASK); } /* Make sure we are connected to the correct server. If not, switch to it if appropriate */ if ( (strlen((char *)dumpEntry.tapes.tapeServer) != 0) && (strcmp((char *)dumpEntry.tapes.tapeServer,butxInfo.serverName) != 0)) { /* Check to see if the tapeServer name is trustworthy */ if ((dumpEntry.flags & (BUDB_DUMP_XBSA_NSS | BUDB_DUMP_BUTA)) && !forcemultiple) { /* The dump was made with a version of the XBSA interface * that didn't allow switching of servers, we can't be sure * that the servername in the backup database is correct. So, * we will check the servername and log it if they don't match; * but we will try to do the delete without switching servers. */ TLog(taskId, "The dump %d requested for deletion is on server %s " "but butc is connected to server %s " "(Attempting to delete the dump anyway)\n", dumpid, (char *)dumpEntry.tapes.tapeServer, butxInfo.serverName); } else { TLog(taskId, "The dump %u requested for deletion is on server %s " "but butc is connected to server %s " "(switching servers)\n", dumpid, (char *)dumpEntry.tapes.tapeServer, butxInfo.serverName); rc = InitToServer(taskId, &butxInfo, (char *)dumpEntry.tapes.tapeServer); if (rc != XBSA_SUCCESS) { setStatus(taskId, TASK_ERROR); ERROR_EXIT(rc); } } } /* Start a new Transaction */ rc = xbsa_BeginTrans(&butxInfo); if (rc != XBSA_SUCCESS) { ErrorLog(0, taskId, rc, 0, "Unable to create a new transaction\n"); setStatus(taskId, TASK_ERROR); ERROR_EXIT(rc); } intrans = 1; /* Query the backup database for list of volumes to delete */ for (index=next=0; index!=-1; index=next) { rc = ubik_Call_SingleServer(BUDB_GetVolumes, udbHandle.uh_client, UF_SINGLESERVER, BUDB_MAJORVERSION, BUDB_OP_DUMPID, tapeName, dumpid, 0, index, &next, &dbTime, &vl); if (rc) { if (rc == BUDB_ENDOFLIST) break; ErrorLog(0, taskId, rc, 0, "Can't find volume info for dump %d\n", dumpid); setStatus(taskId, TASK_ERROR); ERROR_EXIT(rc); } /* Delete all volumes on the list */ for (i=0; i