# 1 "" 



























































CRYPTF =
CRYPTO =





CC = cc#	try using "gcc" target rather than changing this (if you do,
LD = cc#	you MUST change LD, too--else "unresolved symbol:  ___main")
LOC = $(LOCAL_UNZIP) $(CRYPTF)
CF = -O $(LOC)
LF = -o unzip



ZC = -DZIPINFO
ZL = -o zipinfo



FC = # not used
FL = -o funzip



LN = rm -f misc_.c; ln
RM = rm -f
E =
O = .o
SHELL = /bin/sh
INSTALL = install -c -s
BINDIR = /mit/sipb/bin#   target directory - where to install executables


OBJS1 = unzip$O $(CRYPTO) envargs$O explode$O extract$O file_io$O inflate$O
OBJS2 = mapname$O match$O misc$O unreduce$O unshrink$O
OBJS = $(OBJS1) $(OBJS2)
LOBJS = $(OBJS)
OS2_OBJS = $(OBJS:.o=.obj) os2unzip.obj
OBJZ = zipinfo$O envargs$O match$O misc_$O
OS2_OBJZ = $(OBJZ:.o=.obj) os2zinfo.obj
OBJF = funzip$O $(CRYPTO) inflate$O
OS2_OBJF = # not yet supported
UNZIPS = unzip$E # zipinfo$E funzip$E	# zipinfo, funzip not fully supported


# 109 "" 

# 113 "" 

# 116 "" 

# 119 "" 

all: default






SYSTEMS1 = 386i 3Bx 7300 amdahl apollo aviion bsd bull c120 c210 coherent
SYSTEMS2 = convex cray cray_cc cray_v3 cyber_sgi dec dnix encore eta
SYSTEMS3 = gcc gcc_dos generic generic2 gould hk68 hp indigo linux
SYSTEMS4 = minix mips msc_dos next osf1 p_iris pyramid rs6000 rtaix
SYSTEMS5 = sco sco_dos sco_x286 sequent sgi stellar 1 sysv sysv6300
SYSTEMS6 = tahoe ultrix vax wombat xos

SYS_UTIL1 = zi_dos zi_gcc zi_indigo zipinfo fu_gcc funzip



















default:
	@if test -z "$(MAKE)"; then\
		if test -z "$(SYSTEM)";\
		then make help;\
		else make $(SYSTEM) MAKE="make";\
		fi;\
	else\
		if test -z "$(SYSTEM)";\
		then $(MAKE) help;\
		else $(MAKE) $(SYSTEM) goober;\
		fi;\
	fi

goober:

help:
	@echo
	@echo\
 "  If you're not sure about the characteristics of your system, try typing"
	@echo\
 '  "make generic".  If the compiler barfs and says something unpleasant about'
	@echo\
 '  "timezone redefined," try typing "make clean" followed by "make generic2".'
	@echo\
 '  One of these actions should produce a working copy of unzip on most Unix'
	@echo\
 '  systems.  If you know a bit more about the machine on which you work, you'
	@echo\
 '  might try "make list" for a list of the specific systems supported herein.'
	@echo\
 '  And as a last resort, feel free to read the numerous comments within the'
	@echo\
 '  Makefile itself.  Note that to compile the decryption version of UnZip,'
	@echo\
 '  you must obtain crypt.c separately, in addition to uncommenting two lines'
	@echo\
 '  in Makefile (see the main Contents file for ftp and mail-server sites).'
	@echo\
 '  Have an excruciatingly pleasant day.'
	@echo

list:
	@echo
	@echo\
 'Type "make <system>", where <system> is one of the following:'
	@echo
	@echo  "	$(SYSTEMS1)"
	@echo  "	$(SYSTEMS2)"
	@echo  "	$(SYSTEMS3)"
	@echo  "	$(SYSTEMS4)"
	@echo  "	$(SYSTEMS5)"
	@echo  "	$(SYSTEMS6)"
	@echo
	@echo\
 'Otherwise set the shell variable SYSTEM to one of these and just type "make".'
	@echo\
 'Targets for related utilities (ZipInfo) include:'
	@echo
	@echo  "	$(SYS_UTIL1)"

	@echo
	@echo\
 'For further (very useful) information, please read the comments in Makefile.'
	@echo








CFLAGS = $(CF)

unzips:		$(UNZIPS)

unzip$E:	$(OBJS)
	$(LD) $(LF) $(LOBJS) $(LF2)

crypt$O:        crypt.c unzip.h zip.h	# may or may not be in distribution
envargs$O:      envargs.c unzip.h
explode$O:      explode.c unzip.h
extract$O:      extract.c unzip.h
file_io$O:      file_io.c unzip.h
funzip$O:       funzip.c unzip.h
inflate$O:      inflate.c unzip.h
mapname$O:      mapname.c unzip.h
match$O:        match.c unzip.h
misc$O:         misc.c unzip.h
os2unzip$O:     os2unzip.c unzip.h	# for OS/2 only
os2zinfo$O:     os2unzip.c unzip.h	# for OS/2 only
unreduce$O:     unreduce.c unzip.h
unshrink$O:     unshrink.c unzip.h
unzip$O:        unzip.c unzip.h



generic_msg:
	@echo
	@echo\
 '  Attempting "make generic" and "make zipinfo" now.  If this fails for some'
	@echo\
 '  reason, type "make help" and/or "make list" for suggestions.'
	@echo

install:	$(UNZIPS)
	$(INSTALL) $(UNZIPS) $(DESTDIR)$(BINDIR)

clean:
	rm -f $(OBJS) unzip$E $(OBJZ) zipinfo$E














generic:	unzip	# first try if unknown

generic2:		# second try if unknown:  hope make is called "make"...
	make unzip CF="$(CF) -DBSD"





386i:		unzip	# sun386i, SunOS 4.0.2
3Bx:		unzip	# AT&T 3B2/1000-80; should work on any WE32XXX machine
7300:		unzip	# AT&T 7300 (M68000/SysV)
apollo:		unzip	# Apollo Domain/OS machines
bull:		unzip	# Bull DPX/2, BOS 2.00.45 (doesn't require -Xk switch)
coherent:	unzip	# Coherent 3.10, Mark Williams C
cray_cc:	unzip	# Cray-2 and Y-MP, using default (possibly old) compiler
dec:		unzip	# DEC 5820 (MIPS RISC), test version of Ultrix v4.0
encore:		unzip	# Multimax
eta:		unzip	# ETA-10P*, hybrid SysV with BSD 4.3 enhancements
gould:		unzip	# Gould PN9000 running UTX/32 2.1Bu01
hp:		unzip	# HP 9000 series (68020), 4.3BSD or HP-UX A.B3.10 Ver D
hp_ux:		unzip	# (to match zip's makefile entry)
mips:		unzip	# MIPS M120-5(?), SysV.3 [error in sys/param.h file?]
pyramid:	unzip	# Pyramid 90X, prob. all, under >= OSx4.1, BSD universe
rtaix:		unzip	# IBM RT 6150 under AIX 2.2.1
sco:		unzip	# Xenix/386 (tested on 2.3.1); SCO Unix 3.2.0.
stellar:	unzip	# gs-2000
1:		unzip	# Sun 3, 4; SunOS 4.x (SOME SYSTEMS ARE SYSTEM V!)
tahoe:		unzip	# tahoe (CCI Power6/32), 4.3BSD
ultrix:		unzip	# VAXen, DEC 58x0 (MIPS guts), DECstation 2100; v4.x
vax:		unzip	# general-purpose VAX target (not counting VMS)





bsd:		_bsd	# generic BSD (BSD 4.2 & Ultrix handled in unzip.h)

_bsd:
	$(MAKE) unzip CF="$(CF) -DBSD"

aos:
	$(MAKE) unzip CF="$(CF) -DBSD -U__STDC__"





amdahl:		_sysv	# Amdahl (IBM) mainframe, UTS (SysV) 1.2.4 and 2.0.1
aviion:         _sysv	# Data General AViiONs, DG/UX 4.3x
sgi:		_sysv	# Silicon Graphics Iris 4D, Irix SysV rel. 3.3.2
sysv:		_sysv	# generic System V Unix
xos:		_sysv	# Olivetti LSX-3005..3045, X/OS 2.3 and 2.4

_sysv:
	$(MAKE) unzip CF="$(CF) -DSYSV -DTERMIO"











c120:			# Convex C-120, OS 9.0, with non-vectorizing cc 4.0
	$(MAKE) unzip CF="-O1 $(LOC) -Dunix -DBSD"

c210:			# Convex C-210, OS 9.0, cc 4.0
	$(MAKE) unzip CF="-O2 $(LOC) -Dunix -DBSD"










convex:			# previous target was tested on C200/C400
	$(MAKE) unzip CF="$(CF) -Dunix -DCONVEX -ext" LF="$(LF) -ext"



cray:
	$(MAKE) unzip CC="scc" LD="scc"


cray_v3:
	$(MAKE) unzip CC="scc" LD="scc" CF="$(CF) -h scalar3 -h vector3"



cyber_sgi:
	$(MAKE) unzip CF="$(CF) -I/usr/include/bsd"\
	 LF="-lbsd $(LF)"






dnix:		# 680X0, DIAB dnix 5.2/5.3 (a Swedish System V clone)
	$(MAKE) unzip CF="$(CF) -DPROTO -DMODERN"







gcc:
	$(MAKE) unzip CC=gcc LD=gcc CF="-O2 $(LOC)" LF2=""
	strip unzip





gcc_dos:	# may need to add -Uunix to CF
	$(MAKE) unzip CC=gcc LD=gcc CF="-O2 -Wall $(LOC)"\
	 LF="-s" LF2="-o unzip"
	aout2exe unzip


hk68:
	$(MAKE) unzip CC="gcc" LD="gcc" LF="-n $(LF)" \
	CF="-ga -X138 $(LOC) -Dlocaltime=localti -Dtimezone=timezon"



indigo:
	$(MAKE) unzip CF="-cckr $(CF) -DTERMIO"


linux:                # Linux pre-0.96 with gcc 2.1
	$(MAKE) unzip CF="$(CF) -DTERMIO -DLINUX" CC=gcc LD=gcc


minix:
	$(MAKE) unzip CC=gcc CF="$(CF) -DMINIX"













msc_dos:	rsp
	$(MAKE) unzip.exe CF="-Oait -Gs $(LOC) -nologo" CC=cl LD=link E=.exe\
	 O=.obj LOBJS="" LF="@rsp" LF2=""
	del rsp

rsp:
	echo $(OBJS1:.o=.obj)+ > rsp
	echo $(OBJS2:.o=.obj)/noi/e/st:0x1000; >> rsp








msc_os2:		# 16-bit OS/2 (1.x) with MSC 6.00 (use makefile.os2)
	$(MAKE) -nologo unzip.exe zipinfo.exe CC=cl LD=cl E=.exe O=.obj\
	 OBJS="$(OS2_OBJS)" OBJZ="$(OS2_OBJZ)"\
	 CF="-nologo -AC -Ocegit -G2s -DOS2 -DMSC $(LOC)"\
	 LF="-nologo -AC $(LOC) -Lp -F 2000"\
	 LF2="unzip.def -o unzip.exe $(NOD)" LN="copy" RM="del"\
	 ZL="-nologo -AC $(LOC) -Lp -Fb" ZL2="zipinfo.def -o zipinfo.exe"


next:			# 68030 BSD 4.3+Mach
	$(MAKE) unzip LF2="-object -s"



osf1:
	$(MAKE) unzip LF2="-lbsd"



p_iris:
	$(MAKE) unzip CF="$(CF) -I/usr/include/bsd -DBSD"\
	 LF="-lbsd $(LF)"












rs6000:
	$(MAKE) unzip CF="$(CF) -DBSD -D_BSD -DUNIX" LF="-lbsd $(LF)"






sco_dos:	# uncomment zipinfo in UNZIPS if desired
	$(MAKE) unzips CF="-O $(LOC) -DNO_ERRNO -dos -M0" LF="-dos -F 2000"\
	 LF2="-o unzip.exe" ZL="-dos" ZL2="-o zipinfo.exe"


sco_x286:
	$(MAKE) unzip CF="$(CF) -Ml2" LF="$(LF) -Ml2"



sequent:	# Sequent w/Dynix
	$(MAKE) unzip CF="$(CF) -DBSD -DZMEM"


sysv6300:
	$(MAKE) unzip CF="$(CF) -Ml -DTERMIO" LF="$(LF) -Ml"


wombat:		# Wombat 68000 (or whatever)
	@echo
	@echo  '	Ha ha!  Just kidding.'
	@echo









zipinfo$O:	zipinfo.c unzip.h
	$(CC) -c $(CF) zipinfo.c

misc_$O:	misc.c unzip.h
	$(LN) misc.c misc_.c
	$(CC) -c $(CF) $(ZC) misc_.c
	$(RM) misc_.c

os2zinfo$O:	os2unzip.c unzip.h
	$(LN) os2unzip.c os2zinfo.c
	$(CC) -c $(CF) $(ZC) os2zinfo.c
	$(RM) os2zinfo.c

zipinfo$E:	$(OBJZ)
	$(LD) $(ZL) $(OBJZ) $(ZL2)

zi_gcc:			# GNU gcc under Unix (if no strip, don't worry)
	$(MAKE) zipinfo CC=gcc LD=gcc ZL2=""
	strip zipinfo

zi_indigo:		# SGI Iris Indigo
	$(MAKE) zipinfo CF="-cckr -O -DUNIX $(LOC)"

zi_dos:			# MSC 6.0 + nmake, MS-DOS
	$(MAKE) zipinfo.exe CF="-Oait -Gs -nologo $(LOC)" CC=cl\
	 LD=link E=.exe O=.obj ZL="/noi /nol" ZL2=",zipinfo;"\
	 LN="copy" RM="DEL"













funzip$E:	$(OBJF)
	$(LD) $(FL) $(OBJF) $(FL2)

fu_gcc:			# GNU gcc under Unix (if no strip, don't worry)
	$(MAKE) funzip CC=gcc LD=gcc FL2=""
	strip funzip

Makefile: Imakefile
	-rm -f Makefile.bak
	-mv Makefile Makefile.bak
	imake -I. -TImakefile -f /dev/null