/* @(#)memvar.h 1.45 89/12/13 SMI */

/*
 * Copyright 1986-1989 Sun Microsystems, Inc.
 */

#ifndef	memvar_DEFINED
#define	memvar_DEFINED

/*
 * A memory pixrect is a special type of pixrect.  Its image resides in
 * memory, in a publicly known format permitting more direct access to the
 * image than possible with the general pixrectops.
 *
 * In the memory pixrect the image is stored in consecutive memory locations,
 * across the row from left to right, and then from top to bottom.  Each row
 * is padded to a 16-bit or 32-bit boundary (for details refer to the Pixrect
 * Reference Manual).
 *
 * The depth of a pixel is the number of bits required to represent it.
 * Pixels are placed in consecutive fields of width the depth of each pixel,
 * with placement being independent of word or byte boundaries.
 */
struct mpr_data {
	int	md_linebytes;	/* number of bytes from one line to next */
	short	*md_image;	/* word address */
	struct	pr_pos md_offset;
	short	md_primary;
	short	md_flags;	/* Flag bits, see below */
};

/* pixrect data for memory pixrect with plane mask (MP_PLANEMASK set) */
struct mprp_data {
        struct mpr_data	mpr;
        int		planes;
};

#define mpr_d(pr)	((struct mpr_data *) (pr)->pr_data)
#define mprp_d(pr)	((struct mprp_data *) (pr)->pr_data)

/* md_flags bits definitions */

#define MP_REVERSEVIDEO	1	/* Pixrect is reverse video */
				/* (should only be set if pr_depth = 1) */
#define MP_DISPLAY	2	/* Pixrect is a frame buffer device */
#define MP_PLANEMASK	4	/* Pixrect has a plane mask */
				/* (should only be set if pr_depth > 1) */
#ifdef i386
#define MP_I386		8	/* Pixrect is for 386 architecture */
#define MP_STATIC       16	/* Pixrect is a static pixrect */
#endif i386
#define	MP_FONT		32	/* Pixrect is a part of a Pixfont */
				/* (hint to pr_batchrop) */

/* 
 * Each line (row) of the pixrect is padded to be a multiple
 * of this many bits 
 */
#define MPR_LINEBITPAD	16

#define	mpr_linebytes(x, depth)						\
	( ((pr_product(x, depth) + (MPR_LINEBITPAD-1)) >> 3) &~ 1)
#define mpr_prlinebytes(mpr)						\
	mpr_linebytes((mpr)->pr_size.x, (mpr)->pr_depth)
#define	mpr_mdlinebytes(mpr)						\
	(mpr_d(mpr)->md_linebytes)

#define mprd_addr(mprd, xo, yo)						\
	((short *)(							\
	    (int)(mprd)->md_image                                       \
	    + pr_product((mprd)->md_linebytes,(mprd)->md_offset.y+(yo)) \
	    + (((mprd)->md_offset.x+(xo)) >> 3) &~ 1))

#define mprd8_addr(mprd, xo, yo, d)					\
	 ((u_char *)(							\
	     (int)(mprd)->md_image					\
	    + pr_product((mprd)->md_linebytes,(mprd)->md_offset.y+(yo)) \
	    + (pr_product((mprd)->md_offset.x+(xo), (d)) >> 3) )  )

#define	mprd_skew(mprd, xo, yo)						\
	(((mprd)->md_offset.x + (xo)) & 15)

#define	mprs_addr(mprs)		_mprs_addr((struct pr_prpos *)&(mprs))
#define	mprs8_addr(mprs)	_mprs8_addr((struct pr_prpos *)&(mprs))
#define	mprs_skew(mprs)		_mprs_skew((struct pr_prpos *)&(mprs))

#if !defined lint || !defined KERNEL || defined(sun2)
short	*_mprs_addr();
u_char	*_mprs8_addr();
int	_mprs_skew();
#endif

/*
 * Static pixrects.  A pixrect may be created at compile time using the
 * mpr_static macro as part of the static declarations of a program.  Thus
 * mpr_static(cursor, 16, 16, 1, rawcursordata);
 * will declare and initialize (using rawcursordata) the storage needed
 * for a pixrect that may be referred to as 'cursor' subsequently in the
 * same file, or as &cursor if a pointer to that pixrect is called for rather
 * than the pixrect itself.
 */

/* First a pair of utility macros that allow concatenation in a fashion that
 * won't annoy lint (These belong in a standard header file!):
 */
#ifndef	CAT
# ifdef __STDC__
#  define	CAT(a,b)	a ## b
# else /* __STDC__ */
#  undef	IDENT
#  define IDENT(x)	x
#  define	CAT(a,b)	IDENT(a)b
# endif /* __STDC__ */
#endif /* CAT */

#define mpr_static(name, w, h, d, image) \
	struct mpr_data CAT(name,_data) = \
	    {mpr_linebytes(w,d), (short *)(image), {0, 0}, 0, 0}; \
	Pixrect name = {&mem_ops, w, h, d, (caddr_t)&CAT(name,_data)}

/* static pixrect with variables declared "static" */
#define	mpr_static_static(name, w, h, d, image) \
	static struct mpr_data CAT(name,_data) = \
	    {mpr_linebytes(w,d), (short *)(image), {0, 0}, 0, 0}; \
	static Pixrect name = {&mem_ops, w, h, d, (caddr_t)&CAT(name,_data)}

#ifndef NEWPIXMEM
/*
 * During rop calls need to determine if dst/src is something that
 * mem_rop() can handle.  Use the following macro to find out.
 */
#define	MP_NOTMPR(pr)	((pr)->pr_ops->pro_rop != mem_rop)

extern struct pixrectops mem_ops;

int	mem_rop();
#ifndef KERNEL
int	mem_stencil();
int	mem_batchrop();
Pixrect *mem_create();		/* General mpr create routine */
Pixrect *mem_point();		/* Even more general mpr create */
int	mem_destroy();
int	mem_get();
int	mem_put();
int	mem_vector();
Pixrect *mem_region();
#endif KERNEL
int	mem_putcolormap();
int	mem_putattributes();
#ifndef KERNEL
int	mem_getcolormap();
int	mem_getattributes();
#endif KERNEL

#else /* NEWPIXMEM */
#define	MP_NOTMPR(pr)	(0)
extern struct pixrectops mem_ops;
int	mem_destroy();
#endif NEWPIXMEM

#endif	!memvar_DEFINED