# -*- Mode: cperl; coding: utf-8; cperl-indent-level: 2 -*-
package CPAN::Tarzip;
use strict;
use vars qw($VERSION @ISA $BUGHUNTING);
use CPAN::Debug;
use File::Basename ();
$VERSION = sprintf "%.6f", substr(q$Rev: 659 $,4)/1000000 + 5.4;
# module is internal to CPAN.pm

@ISA = qw(CPAN::Debug);
$BUGHUNTING = 0; # released code must have turned off

# it's ok if file doesn't exist, it just matters if it is .gz or .bz2
sub new {
  my($class,$file) = @_;
  $CPAN::Frontend->mydie("new called without arg") unless defined $file;
  if (0) {
    # nonono, we get e.g. 01mailrc.txt uncompressed if only wget is available
    $CPAN::Frontend->mydie("file[$file] doesn't match /\\.(bz2|gz|zip|tgz)\$/")
        unless $file =~ /\.(bz2|gz|zip|tgz)$/i;
  }
  my $me = { FILE => $file };
  if (0) {
  } elsif ($file =~ /\.bz2$/i) {
    unless ($me->{UNGZIPPRG} = $CPAN::Config->{bzip2}) {
      my $bzip2;
      if ($CPAN::META->has_inst("File::Which")) {
        $bzip2 = File::Which::which("bzip2");
      }
      if ($bzip2) {
        $me->{UNGZIPPRG} = $bzip2;
      } else {
        $CPAN::Frontend->mydie(qq{
CPAN.pm needs the external program bzip2 in order to handle '$file'.
Please install it now and run 'o conf init' to register it as external
program.
});
      }
    }
  } else {
    # yes, we let gzip figure it out in *any* other case
    $me->{UNGZIPPRG} = $CPAN::Config->{gzip};
  }
  bless $me, $class;
}

sub gzip {
  my($self,$read) = @_;
  my $write = $self->{FILE};
  if ($CPAN::META->has_inst("Compress::Zlib")) {
    my($buffer,$fhw);
    $fhw = FileHandle->new($read)
	or $CPAN::Frontend->mydie("Could not open $read: $!");
	my $cwd = `pwd`;
    my $gz = Compress::Zlib::gzopen($write, "wb")
	or $CPAN::Frontend->mydie("Cannot gzopen $write: $! (pwd is $cwd)\n");
    $gz->gzwrite($buffer)
	while read($fhw,$buffer,4096) > 0 ;
    $gz->gzclose() ;
    $fhw->close;
    return 1;
  } else {
    system(qq{$self->{UNGZIPPRG} -c "$read" > "$write"})==0;
  }
}


sub gunzip {
  my($self,$write) = @_;
  my $read = $self->{FILE};
  if ($CPAN::META->has_inst("Compress::Zlib")) {
    my($buffer,$fhw);
    $fhw = FileHandle->new(">$write")
	or $CPAN::Frontend->mydie("Could not open >$write: $!");
    my $gz = Compress::Zlib::gzopen($read, "rb")
	or $CPAN::Frontend->mydie("Cannot gzopen $read: $!\n");
    $fhw->print($buffer)
	while $gz->gzread($buffer) > 0 ;
    $CPAN::Frontend->mydie("Error reading from $read: $!\n")
	if $gz->gzerror != Compress::Zlib::Z_STREAM_END();
    $gz->gzclose() ;
    $fhw->close;
    return 1;
  } else {
    system(qq{$self->{UNGZIPPRG} -dc "$read" > "$write"})==0;
  }
}


sub gtest {
  my($self) = @_;
  return $self->{GTEST} if exists $self->{GTEST};
  my $read = $self->{FILE} or die;
  my $success;
  # After I had reread the documentation in zlib.h, I discovered that
  # uncompressed files do not lead to an gzerror (anymore?).
  if ( $CPAN::META->has_inst("Compress::Zlib") ) {
    my($buffer,$len);
    $len = 0;
    my $gz = Compress::Zlib::gzopen($read, "rb")
	or $CPAN::Frontend->mydie(sprintf("Cannot gzopen %s: %s\n",
                                          $read,
                                          $Compress::Zlib::gzerrno));
    while ($gz->gzread($buffer) > 0 ){
        $len += length($buffer);
        $buffer = "";
    }
    my $err = $gz->gzerror;
    $success = ! $err || $err == Compress::Zlib::Z_STREAM_END();
    if ($len == -s $read){
        $success = 0;
        CPAN->debug("hit an uncompressed file") if $CPAN::DEBUG;
    }
    $gz->gzclose();
    CPAN->debug("err[$err]success[$success]") if $CPAN::DEBUG;
  } else {
    $success = 0==system(qq{$self->{UNGZIPPRG} -qdt "$read"});
  }
  return $self->{GTEST} = $success;
}


sub TIEHANDLE {
  my($class,$file) = @_;
  my $ret;
  $class->debug("file[$file]");
  my $self = $class->new($file);
  if (0) {
  } elsif (!$self->gtest) {
    my $fh = FileHandle->new($file) or die "Could not open file[$file]: $!";
    binmode $fh;
    $self->{FH} = $fh;
  } elsif ($CPAN::META->has_inst("Compress::Zlib")) {
    my $gz = Compress::Zlib::gzopen($file,"rb") or
	die "Could not gzopen $file";
    $self->{GZ} = $gz;
  } else {
    my $pipe = "$CPAN::Config->{gzip} -dc $file |";
    my $fh = FileHandle->new($pipe) or die "Could not pipe[$pipe]: $!";
    binmode $fh;
    $self->{FH} = $fh;
  }
  $self;
}


sub READLINE {
  my($self) = @_;
  if (exists $self->{GZ}) {
    my $gz = $self->{GZ};
    my($line,$bytesread);
    $bytesread = $gz->gzreadline($line);
    return undef if $bytesread <= 0;
    return $line;
  } else {
    my $fh = $self->{FH};
    return scalar <$fh>;
  }
}


sub READ {
  my($self,$ref,$length,$offset) = @_;
  die "read with offset not implemented" if defined $offset;
  if (exists $self->{GZ}) {
    my $gz = $self->{GZ};
    my $byteread = $gz->gzread($$ref,$length);# 30eaf79e8b446ef52464b5422da328a8
    return $byteread;
  } else {
    my $fh = $self->{FH};
    return read($fh,$$ref,$length);
  }
}


sub DESTROY {
    my($self) = @_;
    if (exists $self->{GZ}) {
        my $gz = $self->{GZ};
        $gz->gzclose() if defined $gz; # hard to say if it is allowed
                                       # to be undef ever. AK, 2000-09
    } else {
        my $fh = $self->{FH};
        $fh->close if defined $fh;
    }
    undef $self;
}


sub untar {
  my($self) = @_;
  my $file = $self->{FILE};
  my($prefer) = 0;

  if (0) { # makes changing order easier
  } elsif ($BUGHUNTING){
    $prefer=2;
  } elsif (MM->maybe_command($self->{UNGZIPPRG})
           &&
           MM->maybe_command($CPAN::Config->{'tar'})) {
    # should be default until Archive::Tar handles bzip2
    $prefer = 1;
  } elsif (
           $CPAN::META->has_inst("Archive::Tar")
           &&
           $CPAN::META->has_inst("Compress::Zlib") ) {
    if ($file =~ /\.bz2$/) {
      $CPAN::Frontend->mydie(qq{
Archive::Tar lacks support for bz2. Can't continue.
});
    }
    $prefer = 2;
  } else {
    $CPAN::Frontend->mydie(qq{
CPAN.pm needs either the external programs tar, gzip and bzip2
installed. Can't continue.
});
  }
  if ($prefer==1) { # 1 => external gzip+tar
    my($system);
    my $is_compressed = $self->gtest();
    if ($is_compressed) {
      $system = qq{$self->{UNGZIPPRG} -dc }.
          qq{< "$file" | $CPAN::Config->{tar} xvf -};
    } else {
      $system = qq{$CPAN::Config->{tar} xvf "$file"};
    }
    if (system($system) != 0) {
      # people find the most curious tar binaries that cannot handle
      # pipes
      if ($is_compressed) {
        (my $ungzf = $file) =~ s/\.gz(?!\n)\Z//;
        $ungzf = File::Basename::basename($ungzf);
        my $ct = CPAN::Tarzip->new($file);
        if ($ct->gunzip($ungzf)) {
          $CPAN::Frontend->myprint(qq{Uncompressed $file successfully\n});
        } else {
          $CPAN::Frontend->mydie(qq{Couldn\'t uncompress $file\n});
        }
        $file = $ungzf;
      }
      $system = qq{$CPAN::Config->{tar} xvf "$file"};
      $CPAN::Frontend->myprint(qq{Using Tar:$system:\n});
      if (system($system)==0) {
        $CPAN::Frontend->myprint(qq{Untarred $file successfully\n});
      } else {
        $CPAN::Frontend->mydie(qq{Couldn\'t untar $file\n});
      }
      return 1;
    } else {
      return 1;
    }
  } elsif ($prefer==2) { # 2 => modules
    my $tar = Archive::Tar->new($file,1);
    my $af; # archive file
    my @af;
    if ($BUGHUNTING) {
      # RCS 1.337 had this code, it turned out unacceptable slow but
      # it revealed a bug in Archive::Tar. Code is only here to hunt
      # the bug again. It should never be enabled in published code.
      # GDGraph3d-0.53 was an interesting case according to Larry
      # Virden.
      warn(">>>Bughunting code enabled<<< " x 20);
      for $af ($tar->list_files) {
        if ($af =~ m!^(/|\.\./)!) {
          $CPAN::Frontend->mydie("ALERT: Archive contains ".
                                 "illegal member [$af]");
        }
        $CPAN::Frontend->myprint("$af\n");
        $tar->extract($af); # slow but effective for finding the bug
        return if $CPAN::Signal;
      }
    } else {
      for $af ($tar->list_files) {
        if ($af =~ m!^(/|\.\./)!) {
          $CPAN::Frontend->mydie("ALERT: Archive contains ".
                                 "illegal member [$af]");
        }
        $CPAN::Frontend->myprint("$af\n");
        push @af, $af;
        return if $CPAN::Signal;
      }
      $tar->extract(@af) or
          $CPAN::Frontend->mydie("Could not untar with Archive::Tar.");
    }

    Mac::BuildTools::convert_files([$tar->list_files], 1)
          if ($^O eq 'MacOS');

    return 1;
  }
}

sub unzip {
  my($self) = @_;
  my $file = $self->{FILE};
  if ($CPAN::META->has_inst("Archive::Zip")) {
    # blueprint of the code from Archive::Zip::Tree::extractTree();
    my $zip = Archive::Zip->new();
    my $status;
    $status = $zip->read($file);
    die "Read of file[$file] failed\n" if $status != Archive::Zip::AZ_OK();
    $CPAN::META->debug("Successfully read file[$file]") if $CPAN::DEBUG;
    my @members = $zip->members();
    for my $member ( @members ) {
      my $af = $member->fileName();
      if ($af =~ m!^(/|\.\./)!) {
        $CPAN::Frontend->mydie("ALERT: Archive contains ".
                               "illegal member [$af]");
      }
      $status = $member->extractToFileNamed( $af );
      $CPAN::META->debug("af[$af]status[$status]") if $CPAN::DEBUG;
      die "Extracting of file[$af] from zipfile[$file] failed\n" if
          $status != Archive::Zip::AZ_OK();
      return if $CPAN::Signal;
    }
    return 1;
  } else {
    my $unzip = $CPAN::Config->{unzip} or
        $CPAN::Frontend->mydie("Cannot unzip, no unzip program available");
    my @system = ($unzip, $file);
    return system(@system) == 0;
  }
}

1;