Exim 4 for Debian
-----------------

   Table of Contents

   1. Introduction

        1.1. How to find your way around the Documentation
        1.2. Getting Support
        1.3. Packaging

   2. Configuration of Exim 4 in the Debian packages

        2.1. The Configuration System
        2.2. Using TLS
        2.3. SMTP-AUTH
        2.4. How the Exim daemon is started
        2.5. Miscellaneous packaging issues
        2.6. Using Exim with inetd/xinetd
        2.7. Handling incoming mail for local accounts with low UID
        2.8. How to bypass local routing specialities
        2.9. Using more complex deliveries from alias files
        2.10. Putting Exim 4 and UUCP together

   3. Updating from Exim 3
   4. Misc Notes

        4.1. PAM
        4.2. Account name restrictions
        4.3. No deliveries to root!
        4.4. Debugging maintainer and init scripts
        4.5. SELinux
        4.6. misc

   5. Debian modifications to the Exim source
   6. Credits

1. Introduction

   If you're reading this, you have found the README.Debian file. This is
   good, thanks! Please continue reading this file in its entirety. It is
   full of important information and has been written with the questions
   in mind that keep popping up on the mailing lists.

1.1. How to find your way around the Documentation

   Exim comes with very extensive documentation. Here is how to find it.
    1. A lot of information about Debian's Exim 4 packaging can be found
       in this document.
    2. The packages contain a lot of Debian-specific man pages. Use the
       apropos exim command to get a list.
    3. Most files that control the default configuration are documented in
       the exim4-config_files(5) man page, which is symlinked to the file
       names. man <filename> should lead you to the page.
    4. The Debian Exim 4 packages have their own [1]Home Page which also
       links to a User FAQ.
    5. The very extensive Upstream documentation is shipped
         a. in text form (/usr/share/doc/exim4-base/spec.txt.gz) with the
            binary packages.
         b. in HTML in the package exim4-doc-html
         c. as a Texinfo file in the package exim4-doc-info

     1. http://pkg-exim4.alioth.debian.org/

   Please note that documentation found on the web or in other parts of
   the Debian system (such as the Debian Reference) might be outdated and
   thus give wrong advice. In doubt, the documentation listed above should
   take precedence.

1.2. Getting Support

   For your questions and comments, there is a [2]Debian-specific mailing
   list. Please ask Debian-specific questions there, and only write to the
   upstream exim-users mailing list if you are sure that your question is
   not Debian-specific. Debian-specific questions are more likely to find
   answers on our pkg-exim4-users mailing list, while complex custom
   configuration issues might be more easily solved on the upstream
   exim-users mailing list because of the broader and more experienced
   audience there. You can subscribe to pkg-exim4-users [3]via the
   subscription web page; you need to be subscribed to post.

     2. http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users
     3. http://lists.alioth.debian.org/mailman/listinfo/pkg-exim4-users

   If you think that your question might be more easily answered if one
   knows a bit about your configuration, you might want to execute
   reportbug --subject="none" --offline --quiet --severity=wishlist
   --body="none" --output=exim4.reportbug exim4-config on the system in
   question, answer yes to both "include [extended] configuration"
   questions and include the contents of the exim4.reportbug file
   generated by this command with your question. Please check whether the
   file contains any confidential information before sending.

1.3. Packaging

   Similar to the Apache2 package, Exim 4 is an entirely different package
   that does not currently offer a smooth upgrade path from Debian's Exim
   3 packages.

   It is the first Exim package in Debian that can be configured using
   debconf. However, the entire configuration framework is extremely
   flexible, allowing you to get exactly the amount of control you need
   for the job at hand.

   The [4]development web page contains a lot of useful links and other
   information. The subversion repository of the Debian package is
   available for public read-only access and is linked from the
   development web page.

     4. http://pkg-exim4.alioth.debian.org/

1.3.1. Feature Sets in the daemon packages

   To use Exim 4, you need at least the following packages:

   exim4-base
          support files for all Exim MTA (v4) packages

   exim4-config
          configuration for the Exim MTA (v4)

   exim4-daemon-light
          lightweight exim MTA (v4) daemon

   Just apting the metapackage exim4 will pull in the other packages per
   dependency. You'll get an exim daemon with minimal feature set (no
   external lookups).

   If you need more advanced features like LDAP, sqlite, PostgreSQL and
   MySQL data lookups, SASL and SPA SMTP authentication, embedded Perl
   interpreter, and exiscan-acl for integration of virus-scanners and
   SpamAssassin, you can replace exim4-daemon-heavy instead of
   exim4-daemon-light. Additionally, the source package offers
   infrastructure to build your own custom-tailored exim4-daemon-custom
   which exactly fits your special local needs. The infrastructure to do
   so is already in place, see debian/rules for instructions.

1.3.2. How to build a custom daemon

   The process of building a custom daemon is partially documented in the
   debian/rules file in the source package. Patches for more documentation
   are welcome.

2. Configuration of Exim 4 in the Debian packages

   Generally, the Debian Exim 4 packages are configured through debconf.
   You have been asked some questions on package installation, and your
   initial Exim configuration has been created from your answers. You can
   repeat the configuration process any time by invoking dpkg-reconfigure
   exim4-config. If you are an experienced Exim administrator and prefer
   to have your own, hand-crafted, non-automatic Exim configuration, you
   will find information about how to do so in Section 2.1.6, "Using a
   completely different configuration scheme".

   The debconf-driven configuration is mainly geared for a one-domain
   shell account machine/workstation with local delivery as suggested by
   the original upstream default configuration. If you configure the
   packages to handle more than one local domain, all local domains are
   treated identically. The domain part is not used for routing and
   filtering decisions.

   Despite the default configuration being extended somewhat from the
   original upstream, chances are that you'll need to manually change the
   Exim configuration with an editor if you intend to do something that is
   not covered by the debconf-driven configuration. It has never been the
   packages' intention to offer all possible configuration methods through
   debconf. The configuration files are there to be changed, feel free to
   do so if you see fit. The Debian Exim 4 maintainers have tried to make
   the configuration as flexible as possible so that manual intervention
   can be minimized.

   If you need to make manual changes to the Exim configuration, please be
   familiar with how Exim works. At minimum, have read this README file
   and the manpages delivered with the Debian Exim 4 packages, and
   /usr/share/doc/exim4-base/spec.txt.gz chapters 3 and 6. spec.txt.gz is
   an excellent reference.

   Please note that while most free-form fields in the debconf-driven
   configuration have the entered string end up verbatim in Exim's
   configuration file (and thus using more advanced features like host,
   address and domain lists is possible and will probably work), this is
   not officially supported. Only plain lists are supported in the debconf
   dialogs. You may use more advanced features, but they may stop working
   any time during upgrades.

2.1. The Configuration System

2.1.1. The Debconf questions

   In this section, we try to document and explain the debconf questions,
   which are themselves limited to a small screen of information and might
   leave questions unanswered. Since you can usually read this file only
   after having answered the questions, the process can always be repeated
   by invoking dpkg-reconfigure exim4-config.
   /etc/exim4/update-exim4.conf.conf, documented in the update-exim4.conf
   manual page, is a simple shell-script snippet used to store the answers
   that you passed to debconf when initially configuring Exim. You may
   also modify this file with an editor of your choice. The package
   maintainer scripts can handle this and will preserve your changes.

2.1.1.1. General type of mail configuration

   This is the main configuration question which will control which of the
   remaining questions are presented to you. It also controls things like
   daemon invocation and delivery of outgoing mail.

2.1.1.1.1.  internet site; mail is sent and received directly using SMTP

   This option is suitable for a standalone system with full internet
   connectivity.
     * The Exim SMTP daemon will accept messages to local domains, and
       deliver them locally.
     * Outgoing mail will be delivered directly to the mail exchange
       servers of the recipient domain

2.1.1.1.2.  mail sent by smarthost; received via SMTP or fetchmail

   This option is suitable for a standalone client system which has
   restricted internet connectivity, for example on a residential
   connection where an SMTP smarthost is used. Some ISPs block outgoing
   SMTP connections to combat the spam problem, thus requiring the use of
   their smarthosts. It is generally a good idea to use the ISPs smart
   host if one is connected with a dynamic IP address since quite a few
   sites do not accept mail directly delivered from a dial-in pool.

   fetchmail can be used to retrieve incoming mail from the ISP's POP3 or
   IMAP mail server and deliver it to Exim via SMTP.
     * The Exim SMTP daemon will accept messages to local domains, and
       deliver them locally.
     * Outgoing mail will always be delivered to the smarthost configured
       in exim4.

2.1.1.1.3. mail sent by smarthost; no local mail

   This option is suitable for a client system in a computer pool which is
   not responsible for a local e-mail domain. All locally generated e-mail
   is sent to the smarthost without any local domains.

2.1.1.1.4. local delivery only; not on a network

   This option is suitable for a standalone system with no networking at
   all. Only messages for configured local domains are accepted and
   delivered locally; messages for all other domains are rejected:
   ``Mailing to remote domains not supported''.

2.1.1.1.5. no configuration at this time

   This option disables most of Debian's automatisms and leaves exim in an
   unconfigured state. update-exim4.conf will still copy
   /etc/exim4/exim4.conf.template or concatenate the files from
   /etc/exim4/conf.d, and will not generate any configuration control
   macros. Unless you manually edit the configuration source, this will
   leave Exim with a syntactically invalid configuration file, thus in a
   state where the daemon won't even start.

   Only choose this option if you know what you're doing and are prepared
   to create your own Exim configuration.

   dpkg-conffile handling is still in place, and you will be offered
   updates for configuration snippets, as soon as they become available.

2.1.1.2. System mail name

   The "mail name" is the domain name used to "qualify" mail addresses
   without a domain name.

   This name will also be used by other programs. It should be the single,
   full domain name (FQDN).

   For example, if a mail address on the local host is foo@example.org,
   then the correct value for this option would be example.org.

   Exim, as a rule, handles only fully qualified mail addresses, that is,
   addresses with a local part, an @ sign and a domain. If confronted with
   an unqualified address, that is, one without @ sign and without domain,
   first thing exim does is qualify the address by adding the @ sign and a
   domain.

   This qualification happens for all addresses exim encounters, be it
   sender, recipient or else.

   The domain name used to qualify unqualified mail addresses is called
   ``mail name'' on Debian systems and entered in this debconf dialog.
   What you enter here will end up in /etc/mailname, which is a file that
   might be used by other programs as well.

   In some configuration types, the package configuration will offer you,
   at a later step, to hide this name from outgoing messages by rewriting
   the headers.

2.1.1.3. IP addresses to listen on for incoming SMTP connections

   Please enter a semicolon-separated list of IP addresses. The Exim SMTP
   listener daemon will listen on all IP addresses listed here.

   An empty value will cause Exim to listen for connections on all
   available network interfaces.

   If this system does only receive e-mail directly from local services
   (and not from other hosts), it is suggested to prohibit external
   connections to the local Exim daemon. Such services include e-mail
   programs (MUSs) which talk to localhost only as well as fetchmail.
   External connections are impossible when 127.0.0.1 is entered here, as
   this will disable listening on public network interfaces.

   Do not change this unless you know what you are doing. Altering this
   value could post a security risk to your system. For most users, the
   default value is sufficient.

2.1.1.4. Other destinations for which mail is accepted

   Please enter a semicolon-separated list of recipient domains for which
   this machine should consider itself the final destination. These
   domains are commonly called 'local domains'. The local hostname and
   'localhost' are always added to the list given here.

   By default all local domains will be treated identically. If both
   a.example and b.example are local domains, acc@a.example and
   acc@b.example will be delivered to the same final destination. If
   different domain names should be treated differently, it is necessary
   to edit the config files afterwards.

   The answer to this question ends up in the list of domains that Exim
   will consider local domains. Mail for recipients in one of these
   domains will be subject to local alias expansion and then delivered
   locally in the appropriate configuration types.

2.1.1.5. Domains to relay mail for

   Please enter a semicolon-separated list of recipient domains for which
   this system will relay mail, for example as a fallback MX or mail
   gateway. This means that this system will accept mail for these domains
   from anywhere on the Internet and deliver them according to local
   delivery rules.

   Do not mention local domains here. Wildcards may be used.

   The answer to this question is a list of the domains for which Exim
   will relay messages coming in from anywhere on the Internet.

2.1.1.6. Machines to relay mail for

   Please enter a semicolon-separated list of IP address ranges for which
   this system will unconditionally relay mail, functioning as a
   smarthost.

   You should use the standard address/prefix format (e.g.
   194.222.242.0/24 or 5f03:1200:836f::/48).

   If this system should not be a smarthost for any other host, leave this
   list blank.

   Please note that systems not listed here can still use SMTP AUTH to
   relay through this system. If this system only has clients on dynamic
   IP addresses that use SMTP AUTH, leave this list blank as well. Do NOT
   list 0.0.0.0/0!

   Warning: While it is possible to use hostnames instead of IP addresses
   in this list extra care needs to be taken in this case. Unresolvable
   names in the host list will break relaying. See [5]Exim specification
   - chapter Domain, host, address, and local part lists and the
   exim4-config_files man page.

     5. http://www.exim.org/exim-html-current/doc/html/spec_html/ch-domain_host_address_and_local_part_lists.html

2.1.1.7. IP address or host name of the outgoing smarthost

   Please enter the IP address or the host name of a mail server that this
   system should use as outgoing smarthost. If the smarthost only accepts
   your mail on a port different from TCP/25, append two colons and the
   port number (for example smarthost.example::587 or
   192.168.254.254::2525). Colons in IPv6 addresses need to be doubled.

   If the smarthost requires authentication, please refer to
   Section 2.3, "SMTP-AUTH" for notes about setting up SMTP
   authentication.

   Multiple smarthost entries are permitted, semicolon separated. Each of
   the hosts is tried, in the order specified (See Exim specification,
   chapter 20.5).

2.1.1.8. Hide local mail name in outgoing mail

   The headers of outgoing mail can be rewritten to make it appear to have
   been generated on a different system, replacing the local host name in
   From, Reply-To, Sender and Return-Path.

2.1.1.9. Visible domain name for local users

   If you ask Exim to hide the local mail name in outgoing mail, it will
   next ask you for the domain name that should be visible for your local
   users. These information is then used to establish the appropriate
   rewriting rules.

2.1.1.10. Keep number of DNS queries minimal (Dial-on-Demand)

   In normal mode of operation Exim does DNS lookups at startup, and when
   receiving or delivering messages. This is for logging purposes and
   allows keeping down the number of hard-coded values in the
   configuration.

   If this system does not have a DNS full service resolver available at
   all times (for example if its Internet access is a dial-up line using
   dial-on-demand), this might have unwanted consequences. For example,
   starting up Exim or running the queue (even with no messages waiting)
   might trigger a costly dial-up-event.

   This option should be selected if this system is using Dial-on-Demand.
   If it has always-on Internet access, this option should be disabled.

2.1.1.11. Delivery method for local mail

   Exim is able to store locally delivered mail in different formats. The
   most commonly used ones are mbox and Maildir. mbox uses a single file
   for the complete mail folder stored in /var/mail/. With Maildir format
   every single message is stored in a separate file in ~/Maildir/.

   Please note that most mail tools in Debian expect the local delivery
   method to be mbox in their default.

2.1.1.12. Split configuration into small files

   Our packages offer two (actually three, see Section 2.1.6, "Using a
   completely different configuration scheme") possibilities:
    1. Generate Exim's configuration from /etc/exim4/exim4.conf.template,
       which is basically a normal Exim run-time configuration file which
       will be supplemented with some macros generated from Debconf in a
       post-processing step before it is passed to exim.
    2. Generate Exim's configuration from the multiple files in
       /etc/exim4/conf.d/. The directories in /etc/exim4/conf.d/
       correspond to the sections of the Exim run-time configuration file,
       so you should easily find your way around there.

   Splitting the configuration across multiple files means that you have
   the actual configuration file automatically generated from the files
   below /etc/exim4/conf.d/ by invoking update-exim4.conf. Each section of
   Exim's configuration has its own subdirectory and the files in there
   are supposed to be read in alphanumeric order.
   router/00_exim4-config_header is followed by
   router/100_exim4-config_domain_literal, ...

   If you chose unsplit configuration, update-exim4.conf builds the
   configuration from /etc/exim4/exim4.conf.template, which is basically
   the files from /etc/exim4/conf.d/ concatenated together at package
   build time, and thus guarantees consistency on the target system.

   In both cases, update-exim4.conf generates exim configuration macros
   from the debconf configuration values and puts them into the actual
   configuration file, which is then used by the Exim daemon. See the
   update-exim4.conf manual page for more in-depth information about this
   mechanism.

   Benefits of the split configuration approach:
     * it means less work for you when upgrading. If we shipped one big
       file and modified for example the Maildir transport in a new
       version you won't have to do manual conffile merging unless you had
       changed exactly this transport.
     * It allows other packages (e.g. sa-exim) to modify Exim's
       configuration by dropping files into /etc/exim4/conf.d. This needs,
       however quite exact syncing between the exim4 packages and the
       other, cooperating package.

   Drawbacks of the split configuration approach:
     * It is more fragile. If files from different sources (package,
       manually changed, or other package) get out of sync, it is possible
       for Exim to break until you manually correct this. This can for
       example happen if we decide to add a new option to the Debian setup
       of a later version, and you have already set this option in a local
       file.

   Benefits of the unsplit configuration approach:
     * People familiar with configuring Exim may find this approach easier
       to understand as exim4.conf.template basically is a complete Exim
       configuration file which will only undergo some basic string
       replacement before is it passed to exim.
     * Split-config's fragility mentioned above does not occur.

   Drawbacks of the unsplit configuration approach:
     * Will require manual intervention in case of an upgrade.

   If in doubt go for the unsplit config, because it is easier to roll
   back to Debian's default configuration in one step. If you intend to do
   many changes to the Debian setup, you might want to use the split
   config at the price of having to more closely examine the config file
   after an update.

   We'd appreciate a patch that uses ucf and the 3-way-merge mechanism
   offered by that package. It might be the best way to handle the big
   configuration file.

   If you are using unsplit configuration, have local changes to
   /etc/exim4/conf.d/ (either made by yourself or by other packages
   dropping their own routers or transports in) and want to re-generate
   /etc/exim4/exim4.conf.template to activate these changes, you can do so
   by using update-exim4.conf.template.

2.1.2. Access Control in the default configuration

   The Debian exim 4 packages come with a default configuration that
   allows flexible access control and blacklisting of sites and hosts. The
   acls involved can be found in /etc/exim4/conf.d/acl, or in
   /etc/exim4/exim4.conf.template, depending on which configuration scheme
   you use. Most rejections of messages due to this mechanism happen at
   RCPT time. Local configuration of the mechanisms happens through data
   files in /etc/exim4 or via Exim macros that you can set in
   /etc/exim4/conf.d/main, so there is normally no need to change the
   files in the acl subdirectory in a split-config setup. If you use the
   non-split config, you need to edit /etc/exim4/exim4.conf.template,
   which, as a big dpkg-conffile, won't give you any advantage of the
   .ifdef scheme.

   The data files are documented in the exim4-config_files man page.

   The access lists delivered with the exim4 packages also contain quite a
   few configuration options that are too restrictive to be active by
   default on a real-life site. These are masked by .ifdef statements, can
   be activated by setting the appropriate macros, and are documented in
   the ACL files itself.

2.1.3. Using Exim Macros to control the configuration

   Our configuration can be controlled in a limited way by setting macros.
   That way, you can switch on and off certain parts of the default
   configuration and/or override values set in Debconf without having to
   touch the dpkg-conffiles. While touching dpkg-conffiles itself is
   explitly allowed and wanted, it can be quite a nuisance to be asked on
   package upgrade whether one wants to use the locally changed file or
   the file changed by the package maintainer.

   Whenever you see an .ifdef or .ifndef clause in the configuration file,
   you can control the appropriate clause by setting the macro in a local
   configuration file. For split configuration, you can drop the local
   configuration file anywhere in /etc/exim4/conf.d/main. Just make sure
   it gets read before the macro is first used. 000_localmacros is a
   possible name, guaranteeing first order. For a non-split configuration,
   /etc/exim4/exim4.conf.localmacros gets read before
   /etc/exim4/exim4.conf.template. To actually set the macro EXIM4_EXAMPLE
   to the value "this is a sample", write the following line

   EXIM4_EXAMPLE = this is a sample

   into the appropriate file. For more detailed discussion of the general
   macro mechanism, see the Exim specification, chapter 6.4, for details
   how macro expansion works.

2.1.4. How does this work?

   The script update-exim4.conf parses the
   /etc/exim4/update-exim4.conf.conf file and provides the configuration
   for the exim daemon.

   Depending on the value of dc_use_split_config, it either
     * takes all the files below /etc/exim4/conf.d/ and concatenates them
       together or
     * uses exim4.conf.template as input.

   The debconf-managed information from /etc/exim4/update-exim4.conf.conf
   is merged into the generated configuration file by generating a number
   of Exim configuration macros.

   DCsmarthost, for example, is set to the value of $dc_smarthost in
   /etc/exim4/update-exim4.conf.conf which holds the answer to "Which
   machine will act as the smarthost and handle outgoing mail?"

   The result of these operations is saved as
   /var/lib/exim4/config.autogenerated, which is not a dpkg-conffile!
   Manual changes to this file will be overwritten by update-exim4.conf.

   Please consult update-exim4.conf manpage for more detailed information.

   update-exim4.conf is invoked by the init script prior to any operation
   that may invoke an exim process, and gives an error message if the
   generated config file is syntactically invalid. If you want to activate
   your changes to files in conf.d/ just execute invoke-rc.d exim4
   restart.

2.1.5. How do I do minor tweaks to the configuration?

   Some times, you want to do minor adjustments to the Exim configuration
   to make Exim behave exactly like you want it to behave. There are the
   following possibilities to modify Exim's behavior.

2.1.5.1. Adjustments supported by the debconf configuration

   If you want to modify parameters that are supported by the debconf
   configuration, things are easy. Just invoke dpkg-reconfigure
   exim4-config or hand-edit /etc/exim4/update-exim4.conf.conf to your
   liking and restart Exim.

   You can find explanation of the debconf questions in Section 2.1.1,
   "The Debconf questions". Additionally,
   /etc/exim4/update-exim4.conf.conf is documented in the
   update-exim4.conf man page.

2.1.5.2. Adjustments controlled by macros in the Debian Exim configuration

   Some aspects of the Debian Exim configuration can be controlled by Exim
   macros. To find out about these, you need basic understanding of Exim
   configuration. Just look in our Exim configuration and see which macro
   needs to be set to a different value to alter Exim's behavior.

   Section 2.1.3, "Using Exim Macros to control the configuration"
   gives a closer explanation about how to do this.

2.1.5.3. Making direct changes to the Debian Exim configuration

   You can, of course, make direct change to the configuration. All
   configuration files in /etc/exim4 are dpkg-conffiles, and you can thus
   edit them any time. Your changes will be preserved through updates. You
   need to know about how to configure Exim to be successful.

   If you use unsplit configuration, edit /etc/exim4/exim4.conf.template.
   If you use split configuration, edit the Exim configuration snippets in
   /etc/exim4/conf.d.

   More information about how the Exim configuration is built can be found
   in this document and in the update-exim4.conf manual page.

2.1.6. Using a completely different configuration scheme

   If you are an experienced Exim administrator, you might feel working
   with our pre-fabricated configuration cumbersome and complex. You might
   feel right if you need to make more complex changes and do not need to
   receive updates from us. This section is going to tell about how to use
   your own configuration.

   But, you might profit from keeping the Debian magic. Most files that
   come with Debian exim4 are conffiles. Debian is going to care about
   your changes and keeps them around. Additionally, a lot of
   configuration options can be overridden with a macro, which does not
   require you to actually change our configuration file. A lot of people
   are using our configuration scheme, and maybe it is going to save you a
   lot of time if you decide to spend some time familiarizing yourself
   with our scheme.

2.1.6.1. Override exim4-config configuration magic

   If you are only running a small number of systems and want to
   completely disable Debian's magic, just take your monolithic
   configuration file and install it as /etc/exim4/exim4.conf. Exim will
   use that file verbatim. To have something to start, you can either take
   /etc/exim4/exim4.conf.template, run update-exim4.conf --keepcomments
   --output /etc/exim4/exim4.conf, or use upstream's default configuration
   file that is installed as
   /usr/share/doc/exim4-base/examples/example.conf.gz. You are going to
   lose all magic you get from packaging though, so you need to be
   familiar with Exim to build an actually working config.

   /var/lib/exim4/config.autogenerated, the file generated by
   update-exim4.conf, is ignored as soon as /etc/exim4/exim4.conf is
   found. You should not edit /etc/exim4/exim4.conf directly when Exim is
   running, because the forked processes Exim starts for SMTP receiving or
   queue running would use the new configuration file, while the original
   main exim-daemon would still use the old configuration file.

   Some third-party HOWTOs that reference Debian and claim to make things
   easy suggest dumping a pre-fabricated, static config file to
   /etc/exim4/exim4.conf. This is considered bad advice by the Debian
   maintainers since you are going to disable all updates and service
   magic that Debian might deliver in the future this way. If you do not
   know exactly what you're doing here, this is a bad choice. We try to
   comment on external HOWTOs found on the web in the [6]Debian Exim4
   User FAQ to help you find out which advice to follow.

     6. http://wiki.debian.org/PkgExim4UserFAQ

2.1.6.2. Replacing exim4-config with your own exim4 configuration package.

   We split off Exim's configuration system (debconf, update-exim4.conf,
   and the files in /etc/exim4/conf.d) to a separate package,
   exim4-config. If you want to, you can replace exim4-config by something
   entirely different. The other packages don't care. Your package needs
   to:
     * Provides: exim4-config-2, Conflicts: exim4-config-2,exim4-config
     * drop the Exim 4 configuration either into
       /var/lib/exim4/config.autogenerated or into /etc/exim4/exim4.conf.

   Your package must provide an executable update-exim4.conf that must be
   in root's path (/usr/sbin recommended). The init script will invoke
   that executable prior to invoking the actual exim daemon. If you do not
   need that script, have it exit 0.

   If you want to create your own configuration packages, there is a
   number of helpers available.
     * The Exim 4 Debian svn repository holds sources for a
       exim4-config-simple package which contains a simple, not
       debconf-driven configuration scheme as an example which can be used
       as a template for a classical, exim4.conf based configuration
       scheme.
     * The Exim 4 Debian svn repository holds sources for a
       exim4-config-medium package which contains the conf.d driven
       configuration of the main package with the debconf interaction
       removed. This can be used to create your own non-debconf
       configuration package that uses the conf.d mechanism.
     * Finally, you can invoke the script
       debian/config-custom/create-custom-config-package which will create
       a new source package "exim4-config-custom" with the debconf-driven
       config scheme of exim4-config for your local modification.

   Please note that exim4-config-simple and exim4-config-medium are only
   targeted to be used as a template. The configurations contained are not
   suitable for productive use. Of course, the Debian maintainers
   appreciate any patches you might find suitable. The scripts in
   exim4-config-simple and exim4-config-medium may not work at all in your
   environment. Unfortunately, they have not been updated in a long time
   as well. We are willing to accept patches.

   See the development web page for links to the subversion repository.

   Exchanging the entire exim4-config package with something custom comes
   particularly handy for sites that have more than a few machines that
   are similarly configured, but do not want to use the original
   exim4-config package. Build your own exim4-config-custom or
   exim4-config-foo, and simply apt that package to the machines that need
   to have that configuration. Future updates can then be handled via the
   dpkg-conffile mechanism, properly detecting local modifications.

   In the future, it might be possible that Debian will contain multiple
   flavours of Exim4 configuration. However, these packages would have to
   be maintained by someone else because the exim4 package maintainers
   think that the scheme delivered with exim4-config is the least of all
   evils and would rather not spend the time to maintain multiple
   configuration schemes while only actually using one. It would be nice
   to have a configuration scheme using a monolithic config file, managed
   by ucf in three-way-merge mode. If anybody feels ready to maintain it,
   please go ahead.

2.2. Using TLS

2.2.1. Exim 4 as TLS/SSL client

   Both exim4-daemon-heavy and exim4-daemon-light support TLS/SSL using
   the GnuTLS library and STARTTLS. Exim will use TLS via STARTTLS
   automatically as client if the server Exim connects to offers it.

   This means that you will not need any special configuration if you want
   to use TLS for outgoing mail. However, if your server setup mandates
   the use of client certificates, you need to amend your remote_smtp
   and/or remote_smtp_smarthost transports with a tls_certificate option.
   This is not commonly needed.

   The certificate presented by the remote host is not checked unless you
   specify a tls_verify_certificate option on the transport.

   To make exim send a TLS certificate to the remote host set
   REMOTE_SMTP_TLS_CERTIFICATE/REMOTE_SMTP_PRIVATEKEY or for the
   remote_smtp_smarthost transport
   REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE/REMOTE_SMTP_SMARTHOST_PRIVATEKEY
   respectively.

   TLS on connect is not natively supported.

2.2.2. Enabling TLS support for Exim as server

   You should have created certificates in /etc/exim4/ either by hand or
   by usage of the exim-gencert (which requires openssl). exim-gencert is
   shipped in /usr/share/doc/exim4-base/examples/ and takes care of proper
   access privileges on the private key file.

   Now, enable TLS by setting the macro MAIN_TLS_ENABLE in a local
   configuration file as described in Section 2.1.3, "Using Exim
   Macros to control the configuration".

   After this configuration, Exim will advertise STARTTLS when connected
   to on the normal SMTP ports. Some broken clients (most prominent
   example being nearly all versions of Microsoft Outlook and Outlook
   Express, and Incredimail) insist on doing TLS on connect on Port 465.
   If you need to support these, set SMTPLISTENEROPTIONS='-oX 465:25 -oP
   /var/run/exim4/exim.pid' in /etc/default/exim4 and
   "tls_on_connect_ports=465" in the main configuration section.

   The -oP is needed because Exim does not write an implicit pid file if
   -oX is given. Without pid file, init script and cron job will
   malfunction.

   It might be appropriate to add "+tls_cipher +tls_peerdn" to any
   log_selector statement you might already have, or to add a log_selector
   statement setting these two options in a local configuration file.
   These options have Exim log what cipher your Exim and the peer's mailer
   have negotiated to use to encrypt the transaction, and they have Exim
   log the Distinguished Name of the peer's certificate.

   Exim can be configured to ask a client for a certificate and to try to
   verify it. Debian's exim configuration used to enable this by default,
   but stopped doing so since it caused TLS errors with a couple of
   popular clients (Outlook, Incredimail, etc.). To enable this again set
   the macro MAIN_TLS_TRY_VERIFY_HOSTS to the lists hosts whose
   certificates you want to check. (Use * to try checking all hosts. The
   value of the macro is used to populate exim's main option
   tls_try_verify_hosts.) You should also point
   MAIN_TLS_VERIFY_CERTIFICATES to a file containing the accepted
   certificates, since its default setting
   (/etc/ssl/certs/ca-certificates.crt) can contain a large list of
   certificates which causes the interoperabilty problems with Outlook
   et.al. noted above.

   The server certificate is only used for incoming connections, please
   consult Section 2.2.1, "Exim 4 as TLS/SSL client" for the
   corresponding outgoing conncection options.

2.2.3. Troubleshooting

   If Exim complains in an SMTP session that TLS is unavailable, the Exim
   mainlog or paniclog frequently has exact information about what might
   be wrong. Fo example, you might see

   2003-01-27 19:06:45 TLS error on connection from localhost [127.0.0.1]
   (cert/key setup): Error while reading file)

   showing that there has been an error while accessing the certificate or
   the private key file.

   Insuffient entropy available is a frequent cause of TLS failures in
   Exim context. If Exim logs "not enough random bytes available", or
   simply hangs silently when an encrypted connection should be
   established, then Exim was unable to read enough random data from
   /dev/random to do whatever cryptographic operation is requested. Please
   check that your /dev/random device is setup properly.

   You might also find "TLS error on connection to [...]
   (gnutls_handshake): The Diffie-Hellman prime sent by the server is not
   acceptable (not long enough)." given as reason. Exim by default
   requires a DH prime length of 1024 bits. This requirement can be
   downgraded by setting the tls_dh_min_bits option on the SMTP transport.
   The setting is accessible in the Debian configuration by setting the
   macro TLS_DH_MIN_BITS. (e.g. "TLS_DH_MIN_BITS = 768").

2.3. SMTP-AUTH

   Exim can do SMTP AUTH both as a client and as a server.

   AUTH PLAIN and AUTH LOGIN are disabled for connections which are not
   protected by SSL/TLS per default. These authentication methods use
   cleartext passwords, and allowing the transmission of cleartext
   passwords on unencrypted connections is a security risk. Therefore, the
   default configuration configures Exim not to use and/or allow AUTH
   PLAIN and AUTH LOGIN over unencrypted connections.

   It is thus recommended to set up Exim to use TLS to encrypt the
   connections. Please refer to Section 2.2, "Using TLS" for
   documentation about this. Note that most Microsoft clients need special
   handling for TLS.

2.3.1. Using Exim as SMTP-AUTH client

   If you want to set up Exim as SMTP AUTH client for delivery to your
   internet access provider's smarthost put the name of the server, your
   login and password in /etc/exim4/passwd.client. See the man page for
   exim4-config_files(5) for more information about the required format.

   If you need to enable AUTH PLAIN or AUTH LOGIN for unencrypted
   connections because your service provider does support neither TLS
   encryption nor the CRAM MD5 authentication method, you can do so by
   setting the AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS macro. Please refer to
   Section 2.1.3, "Using Exim Macros to control the configuration" for
   an explanation of how best to do this.

   /etc/exim4/passwd.client needs to be readable for the exim user (user
   Debian-exim, group Debian-exim). It is suggested that you keep the
   default permissions root:Debian-exim 0640.

2.3.2. Using Exim as SMTP-AUTH server

   The configuration files include many, verbosely commented, examples for
   server-side smtp-authentication which just need to be uncommented.

   If you need to enable AUTH PLAIN or AUTH LOGIN for unencrypted
   connections because your clients neither support TLS encryption nor the
   CRAM MD5 authentication method, you can do so by setting the
   AUTH_SERVER_ALLOW_NOTLS_PASSWORDS macro. Please refer to
   Section 2.1.3, "Using Exim Macros to control the configuration" for
   an explanation of how best to do this.

   If you want to authenticate against system passwords (e.g. /etc/shadow)
   the easiest way is to use saslauthd in the Debian package sasl2-bin.
   You have to add the exim-user (currently Debian-exim) to the sasl
   group, to give exim permission to use the saslauthd service.

   The Debian exim4 maintainers consider using system login passwords a
   bad idea for the following reasons:
     * A compromised password will give access to a system account.
     * E-Mail passwords could accidentally be transmitted unencrypted.
     * E-Mail passwords are likely to be stored with the client software,
       which greatly increases the chance of a compromise.

2.4. How the Exim daemon is started

   The Debian Exim 4 packages' init script is located in
   /etc/init.d/exim4. Apart from the functions that are required by Debian
   policy and the LSB, it supports the commands what, which executes
   exiwhat to show what your Exim processes are doing, and force_stop
   which unconditionally kills all Exim processes.

   The init script can be configured to start listening and/or queue
   running daemons. This configuration can be found in /etc/default/exim4.
   This file is extensively documented.

2.5. Miscellaneous packaging issues

2.5.1. The daily cron job

   Exim4's daily cron job (/etc/cron.daily/exim4-base) does basic
   housekeeping tasks:
     * It reads /etc/default/exim4, so you can use this file to change any
       of the variables used in the cron job.
     * It is a no-op if no Exim4 binary is found.
     * If $E4BCD_DAILY_REPORT_TO is set to a non-empty string, the output
       of eximstats is mailed to the address given in that variable. The
       default is empty, so no reports are sent. Options for eximstats can
       be given in $E4BCD_DAILY_REPORT_OPTIONS.
     * A non-empty paniclog is a nearly sure sign of bad things going on.
       Thus, the cron job will send out warning messages to the syslog and
       root if it finds the panic log non-empty. Please note that the
       paniclog is not rotated daily, so existing issues will be reported
       daily until either the paniclog is rotated due to its sheer size,
       or you manually move it away, for example by calling logrotate -f
       /etc/logrotate.d/exim4-paniclog from a shell.
       Just in case your system logs transient error situations to the
       panic log as well (see, for example, [7]Exim Bug 92), you can
       configure $E4BCD_PANICLOG_NOISE to a regular expression. If the
       paniclog contains only lines that match that regular expression, no
       warning messages are generated.
       If you want to disable paniclog monitoring completely, set
       $E4BCD_WATCH_PANICLOG to no. E4BCD_WATCH_PANICLOG=once will rotate
       a non-empty paniclog automatically after sending out the warning
       e-mail.
     * It tidies up the retry and hints databases.

     7. http://www.exim.org/bugzilla/show_bug.cgi?id=92

2.6. Using Exim with inetd/xinetd

   Exim4 is run as a separate daemon instead of inetd/xinetd for two
   reasons:

   Ease of maintenance:
          update-inetd is difficult to impossible to handle correctly
          (Just check the archived bug reports of Exim.) and update-inetd
          seems to be unmaintained for a long time, nobody dares to touch
          it. To quote Mark Baker, the maintainer of Exim (v3): "I really
          wish I had never used inetd in the first place, but simply set
          up exim to run as a daemon, but it's too late to change that
          now."

   Extended features
          Running from inetd interferes with Exim's resource controls (e.g
          it disables smtp_accept_max_per_host and smtp_accept_max).

   If you introduce bugs on your systems by running from (x)inetd you are
   on your own! If you want to run exim from xinetd, follow these steps:
    1. Disable Exim 4's listening daemon by executing update-exim4defaults
       --queuerunner queueonly
    2. Create /etc/xinetd.d/exim4
service smtp
{
    disable     = no
    flags       = NAMEINARGS
    socket_type = stream
    protocol    = tcp
    wait        = no
    user        = Debian-exim
    group       = Debian-exim
    server      = /usr/sbin/exim4
    server_args = exim4 -bs
}

    3. Run invoke-rc.d exim4 restart; invoke-rc.d (x)inetd restart

   If you want to use plain inetd, insert following line into
   /etc/inetd.conf:
smtp stream   tcp     nowait  Debian-exim     /usr/sbin/exim4 exim4 -bs

2.7. Handling incoming mail for local accounts with low UID

   Since system accounts (mail, uucp, lp etc) are usually aliased to root,
   and root's mailbox is usually read by a human, these account names have
   started to be a common target for spammers. The Debian Exim 4 packages
   have a mechanism to deal with this situation. However, since this
   derives rather far from normal behavior, it is disabled by default.

   To enable it, set the macro FIRST_USER_ACCOUNT_UID to a numeric,
   non-zero value. Incoming mail for local users that have a UID lower
   than FIRST_USER_ACCOUNT_UID is rejected with the message "no mail to
   system accounts". Incoming mail for local users that have a UID greater
   or equal FIRST_USER_ACCOUNT_UID are processed as usual. Therefore, the
   default value of 0 ensures that the mechanism is disabled. On Debian
   systems, setting FIRST_USER_ACCOUNT_UID to 500 or 1000 (depending on
   your local policy) will disable incoming mail for system accounts.

   Just in case that you need exceptions to the rule,
   /etc/exim4/lowuid_aliases is an alias file that is only honored for
   local accounts with UID lower than FIRST_USER_ACCOUNT_UID. If you
   define an alias for such an account here, incoming mail is processed
   according to the alias. If you alias the account to itself, messages
   are delivered to the account itself, which is an exception to the rule
   that messages for low-UID accounts are rejected. The format of
   /etc/exim4/lowuid_aliases is just another alias file.

2.8. How to bypass local routing specialities

   Sometimes, it might be desireable to be able to bypass local routing
   specialities like the alias file or a user-forward file. This is
   possible in the Debian Exim4 packages by prefixing the account name
   with "real-". For a local account name "foo",
   "real-foo@hostname.example" will result in direct delivery to foo's
   local Mailbox.

   This feature is by default only available for locally generated
   messages. If you want it to be accessible for messages delivered from
   remote as well, set the Exim macro COND_LOCAL_SUBMITTER to true. If you
   do not want this at all, set the macro to false. Please note that the
   userforward router uses this feature to get error messages delivered,
   i.e. notifying the user of a syntax error in her .forward file.

2.9. Using more complex deliveries from alias files

   Delivery to arbitrary files, directory or to pipes in the /etc/aliases
   file is disabled by default in the Debian Exim 4 packages. The delivery
   process including the program being piped to would run as the exim
   admin-user Debian-exim, which might open up security holes.

   Invoking pipes from /etc/aliases file is widely considered obsolete and
   deprecated. The Debian Exim package maintainers would like to suggest
   using a dedicated router/transport pair to invoke local processes for
   mail processing. For example, the Debian mailman package contains a
   /usr/share/doc/mailman/README.Exim4.Debian file that gives a good
   example how to implement this. Using a dedicated router/transport pair
   have the following advantages:
     * The router/transport pair can be put in place by another package,
       giving a well-defined transaction point between Exim 4 and
       $PACKAGE.
     * Not allowing pipe deliveries from alias files makes it harder to
       accidentally run programs with wrong privileges.
     * It is possible to run different pipe processes under different
       accounts.
     * Even if only invoking a single local program, it is easier to do
       with your dedicated router/transport since you won't need to change
       this file, making automatic updates of this file possible for
       future versions of the Exim 4 packages. If you do local changes
       here, dpkg conffile handling will bother you on future updates.

   If you insist on using /etc/aliases in the traditional way, you will
   need to activate the respective functions by setting the transport
   options on the system_aliases router appropriately. Macros are defined
   to make this easier. See
   /etc/exim4/conf.d/router/400_exim4-config_system_aliases for
   information about which macros are available. You might find the
   address_file, address_pipe and/or address_directory transports that are
   used for the userforward router helpful in writing your own transports
   for use in the system_aliases router.

   If any of your aliases expand to pipes or files or directories you
   should set up a user and a group for these deliveries to run under. You
   can do this by setting the "user" and - if necessary - a "group" option
   and adding a "group" option if necessary. Alternatively, you can
   specify "user" and/or "group" on the transports that are used.

2.10. Putting Exim 4 and UUCP together

   UUCP is a traditional way to execute remote jobs (e.g. spool mails),
   and as a lot of old things there are much more than one way to do it.
   However, today, the ways to handle it have boiled down to more or less
   two different ways.

   Our recommendation is to use bsmtp/rsmtp wherever possible, because it
   supports all kinds of mail addresses (also the empty ones in bounces),
   and is also better from the security point of view.

2.10.1. Sending mail via UUCP

2.10.1.1. rmail with full addresses

   rmail is the oldest way to transfer mail to a remote system. However,
   today it is normally required to use addresses with full domains for
   that (Well, they look like any normal address for you, and we do not
   tell about the other way to not confuse you ;). If you want this, you
   can use this transport:
rmail:
    debug_print = "T: rmail for $pipe_addresses"
    driver=pipe
    command = uux - -r -a$sender_address -gC $domain_data!rmail $pipe_addresses
    return_fail_output
    user=uucp
    batch_max = 20

   However, all recipients are handled via the command line, so you are
   discouraged to use it.

2.10.1.2. bsmtp/rsmtp

   This is a more efficient way to transfer mails. It works like sending
   SMTP via a pipe, but instead of waiting for an answer, the SMTP is just
   batched; from this is also the name batched SMTP or short bsmtp.

   Furthermore, this way won't fail on addresses like " "@do.main. If you
   want this, please use this, if the remote site uses rsmtp (e.g. is Exim
   4):
rsmtp:
    debug_print = "T: rsmtp for $pipe_addresses"
    driver=pipe
    command = /usr/bin/uux - -r -a$sender_address -gC $domain_data!rsmtp
    use_bsmtp
    return_fail_output
    user=uucp
    batch_max = 100

   and this if it wants bsmtp as the command:
bsmtp:
    debug_print = "T: bsmtp for $pipe_addresses"
    driver=pipe
    command = /usr/bin/uux - -r -a$sender_address -gC $domain_data!bsmtp
    use_bsmtp
    return_fail_output
    user=uucp
    batch_max = 100

   Of course, these examples can be extended for e.g. compression (but you
   can also use ssh for compression, if you want).

2.10.1.3. The router

   You need a router to tell Exim 4 which mails to forward to UUCP. You
   can use this one; please adopt the last line. Of course, it is also
   possible to send mail via more than one way.
uucp_router:
    debug_print = "R: uucp_router for $local_part@$domain"
    driver=accept
    require_files = +/usr/bin/uux
    domains = wildlsearch;/etc/exim4/uucp
    transport = rsmtp

   The file /etc/exim4/uucp looks like:
*.do.main       uucp.name.of.remote.side

2.10.1.4. Speaking UUCP with the smarthost

   If you have a leaf system (i.e. all your mail not for your local system
   goes to a single remote system), you can just forward all non-local
   mail to the remote UUCP system. In this case, you can replace "domains
   = ..." with "domains = ! +local_domains", but then you need also to
   replace $domain_data in the transport by the UUCP-name of your
   smarthost. The file /etc/exim4/uucp is not needed in this case.

2.10.2. Receiving mail via UUCP

2.10.2.1. Allow UUCP to use any envelope address

   Depending how much you trust your local users, you might use
   trusted_users and add uucp to it or use local_sender_retain=true and
   local_from_check=false.

2.10.2.2. If you get batched smtp

   Allow uucp to execute rsmtp via
commands        rmail rnews rsmtp

   in your /etc/uucp/sys, and ask the sending site to use rsmtp (and not
   bsmtp) as the batched command.

3. Updating from Exim 3

   If you use exim4-config from Debian, you will get the debconf based
   configuration scheme that is intended to cover the majority of cases.

   If exim4-config is installed while an Exim 3 package is present on the
   system, exim4-config tries to parse the Exim 3 config file to determine
   the answers that were given to eximconfig on Exim 3 installation. These
   answers are then taken as default values for the debconf based
   configuration process. Be warned! eximconfig from the Exim 3 packages
   does not record the explicit answers given on Exim 3 configuration. So
   we have to guess the answers from the Exim 3 configuration file
   /etc/exim/exim.conf, which is bound to fail if the config file has been
   modified after using eximconfig.

   This is the reason why we refrained from doing a "silent update", but
   only use the guessed answers to get reasonable defaults for our debconf
   based configuration process.

   Please note that we do not use the exim_convert4r4 script, but try to
   configure the Exim 4 package in the same way Exim 3 was. This will
   hopefully aid future updates.

   If you have used a customized Exim 3 configuration, you can of course
   use exim_convert4r4, and install the resulting file as
   /etc/exim4/exim4.conf after careful inspection. Exim 4 will then use
   that file and ignore the file that it generated from the debconf
   configuration. To aid future updates, we do, however, encourage you not
   to use the exim_convert4r4-generated file verbatim but instead drop
   appropriate configuration snippets in their appropriate place in
   /etc/exim4/conf.d.

4. Misc Notes

4.1. PAM

   PAM: On Debian systems the PAM modules run as the same user as the
   calling program, so they cannot do anything you could not do yourself,
   and in particular cannot access /etc/shadow unless the user is in group
   shadow. - If you want to use /etc/shadow for Exim's SMTP AUTH you will
   need to run exim as group shadow. Only exim4-daemon-heavy is linked
   against libpam. We suggest using saslauthd instead.

4.2. Account name restrictions

   In the default configuration, Exim cannot locally deliver mail to
   accounts which have capitals in their name. This is caused by the fact
   that Exim converts the local part of incoming mail to lower case before
   the comparision done by the check_local_user directive in routers is
   done.

   The router option caseful_local_part can be used to control this, and
   we decided not to set this option in the Debian configuration since it
   would be a rather big change to Exim's default behavior.

4.3. No deliveries to root!

   No Exim 4 version released with any Debian OS can run deliveries as
   root. If you don't redirect mail for root via /etc/aliases to a
   nonprivileged account, the mail will be delivered to /var/mail/mail
   with permissions 0600 and owner mail:mail.

   This redirection is done by the mail4root router which is last in the
   list and will thus catch mail for root that has not been taken care of
   earlier.

4.4. Debugging maintainer and init scripts

   Most of the scripts that come with this Debian package do a set -x if
   invoked with the environment variable EX4DEBUG defined and non-zero.
   This is particularly handy if you need to debug the maintainer scripts
   that are invoked during package installation. Since dpkg redirects
   stdout of maintainer scripts, calling dpkg with EX4DEBUG set might
   yield interesting results. If in doubt, invoke the maintainer scripts
   with EX4DEBUG set manually directly from the command line.

4.5. SELinux

   There is no SELinux policy for Exim4 available so far. Until this is
   resolved, users should use postfix or sendmail if they intend to run
   SELinux.

   The Debian Exim4 maintainers would appreciate if somebody could write
   an SELinux policy. We will gladly use them in the Debian packages as
   long as there is somebody available to test, debug and support.

4.6. misc

     * convert4r4 is installed as /usr/sbin/exim_convert4r4.
     * The charset for $header_foo expansions defaults to UTF-8 instead of
       ISO-8859-1.
     * [8]Marc Merlin's Exim 4 Page has a lot of ACL examples.
     * For an example of Exim usage in a large installation, see Tony
       Finch's [9]paper about the Exim installation at University of
       Cambridge:

     8. http://marc.merlins.org/linux/exim/
     9. http://www-uxsup.csx.cam.ac.uk/~fanf2/hermes/doc/talks/2005-02-eximconf/

5. Debian modifications to the Exim source

   [10]Patches by Steve Haslam:
          boolean_redefine_protect [src/mytypes.h] Surround the definition
          of TRUE and FALSE macros with #ifndef /#endif, in case some
          other header defines them (from mixing No Perl and Exim, istr)

     10. http://www.arise.demon.co.uk/exim-patches/

   Other stuff

          + link exim dynamically against pcre.
          + The main binary is /usr/sbin/exim4:
               o src/globals.c was changed to use 'US BIN_DIRECTORY
                 "/exim4"' as default for exim_path.
               o changed default for $exim_path (modulo lower/upper case)
                 from BIN_DIRECTORY/exim to BIN_DIRECTORY/exim4 in
                 exicyclog.src, exim_checkaccess.src, eximon.src,
                 exinext.src, exiqgrep.src, exiwhat.src.
               o OS/Makefile-Linux:EXIWHAT_MULTIKILL_ARG=exim4
          + [11]localscan_dlopen .patch: Allow to use and switch between
            different local_scan functions without recompiling Exim. Use
            local_scan_path = /path/to/sharedobject to utilize
            local_scan() in /path/to/sharedobject.
          + changes to the documentation to have the [12]Debian-specific
            mailing list mentioned where the [13]official exim-users list
            is mentioned

     11. http://marc.merlins.org/linux/exim/files/sa-exim-current/
     12. mailto:pkg-exim4-users@lists.alioth.debian.org
     13. mailto:exim-users@exim.org

6. Credits

   [14]Andreas Barth
          UUCP documentation

     14. mailto:aba@not.so.argh.org

   Dan Weber, Ryen Underwood
          inetd/xinetd documentation

