2004-05-15  Jeffrey Altman <jaltman@mit.edu>

    * cc_mslsa.c:  The FAILED() macro only considered an error 
      to be a failure if the value is negative.  ConstructTicketRequest()
      returns positive errors.  Do not use FAILED() to test the result.
      Fix a potential leak of LSA allocated memory.  Fix a leak of 
      LocalAlloc memory.

2004-04-13  Jeffrey Altman <jaltman@mit.edu>

    * ccbase.c:
      Since we have to reserve all the single letter
      prefixes make them apply to all platforms

2004-04-13  Jeffrey Altman <jaltman@mit.edu>

    * ccbase.c:
      On Windows, if there is a ccache name provided without
      a prefix but which appears to start with a drive letter,
      treat it as a FILE: ccache instead of failing with a
      ccache type unknown error.
     
2004-04-06  Jeffrey Altman <jaltman@mit.edu>

    * cc_mslsa.c:
      In at least one case on Win2003 it appears that it is possible 
      for the logon session to be authenticated via NTLM and yet for
      there to be Kerberos credentials obtained by the LSA on behalf
      of the logged in user.  Therefore, we are removing the test 
      for IsKerberosLogon() within krb5_lcc_resolve()
      which was meant to avoid the need to perform GetMSTGT() when
      there was no possibility of credentials being found.

2004-03-31  Jeffrey Altman <jaltman@mit.edu>

    * cc_mslsa.c: Add IsWindows2000() function and use it to return 
      errors whenever the MSLSA: ccache type is used on platforms
      older than Windows 2000.  This is needed to prevent calls to
      the functions loaded from ADVAPI32.DLL and SECUR32.DLL which 
      do not exist on the Windows 9x platforms.

2004-03-18  Jeffrey Altman <jaltman@mit.edu>

   * cc_mslsa.c:
     Add missing return statements in krb5_lcc_start_seq_get()

     Return error if principal name cannot be determined during
     krb5_lcc_resolve()

   * cc-int.h:
     New file - Add prototypes for cc internal functions

   * cc_retr.c - include cc-int.h

2004-02-04  Jeffrey Altman <jaltman@mit.edu>

   * cc_mslsa.c:
     Remove reference to <ntstatus.h> as it is not present in the August 2001
     Platform SDK used by Pismere.  Instead copy the error value.

2004-02-02  Jeffrey Altman <jaltman@mit.edu>

   * cc_msla.c: 
     GetMSCacheTicketFromCacheInfo() uses the tktinfo->TicketFlags as the
     value to assign to TicketRequest->TicketFlags.  This field is blindly
     inserted into the kdc-options[0] field of the TGS_REQ.  If there are
     bits such as TRANSIT_POLICY_CHECKED in the TicketFlags, this will result
     in an unknown TGS_OPTION being processed by the KDC.

     This has been fixed by mapping the Ticket Flags to KDC options.
     We only map Forwardable, Forwarded, Proxiable, and Renewable.  The others
     should not be used.

2004-02-02  Jeffrey Altman <jaltman@mit.edu>

   * cc_mslsa.c: the MSLSA code was crashing on Pismere machines when 
     logging on with cross realm credentials.  On these machines there are
     8 tickets within the LSA cache from two different realms.  One of the
     krbtgt/CLIENT-REALM@CLIENT-REALM tickets (not the Initial ticket but
     a Forwarded ticket) is inaccessible to the ms2mit.exe and leash32.exe
     processes.  The attempt to access the ticket returns a SubStatus code
     of STATUS_LOGON_FAILURE (0xC000006DL) which is supposed to mean that
     the logon attempt was invalid due to bad authentication information.
     kerbtray has no problem listing this ticket.  The other seven tickets
     in the cache including the Initial Ticket are accessible.  Modified 
     krb5_lcc_next_cred() to skip to the next ticket if an attempt to read
     a single ticket fails.

2004-01-31  Jeffrey Altman <jaltman@mit.edu>

   * cc_mslsa.c: Optimize the get next logic by storing a handle to
     the MS TGT in the lcc_cursor data structure

2004-01-31  Jeffrey Altman <jaltman@mit.edu>

   * cc_mslsa.c: Do not return tickets to the caller if they contain
     NULL session keys.  This is to prevent useless TGTs from being
     placed into the MIT credential cache.

2004-01-30  Jeffrey Altman <jaltman@mit.edu>

   * cc_mslsa.c: As per extensive conversations with Doug Engert we have
     concluded that MS is not specifying a complete set of domain information
     when it comes to service tickets other than the initial TGT.  What happens
     is the client principal domain cannot be derived from the fields they
     export.  Code has now been added to obtain the domain from the initial
     TGT and use that when constructing the client principals for all tickets.

     This behavior can be turned off by setting a registry either on a per-user
     or a system-wide basis:

        {HKCU,HKLM}\Software\MIT\Kerberos5
            PreserveInitialTicketIdentity = 0x0 (DWORD)
           

2004-01-06  Jeffrey Altman <jaltman@mit.edu>

   * cc_file.c, cc_memory.c:
     Add stub implementations for unimplemented krb5_cc_remove_cred()
     Returns KRB5_CC_NOSUPP

   * cc_mslsa.c:
     Add implementation for krb5_cc_remove_cred().  Returns KRB5_CC_READONLY.

2003-12-18  Jeffrey Altman <jaltman@mit.edu>

   * cc_retr.c:  Extract the test to determine if a credential matches
     a requested credential according to the specified fields into 
     a private function: krb5int_cc_creds_match_request()

   * cc_mslsa.c: Extend the functionality of krb5_lcc_retrieve() to
     perform a MS Kerberos LSA ticket request if there is no matching
     credential in the cache.  The MS Kerberos LSA places the following
     restriction on what tickets it will place into the LSA cache:
         tickets obtained by an application request for a specific
         set of kerberos flags or enctype will not be cached.
     Therefore, we first make a request with no flags or enctype in 
     the hope that we will be lucky and get the right ones anyway.
     If not, we make the application's request and return that ticket
     if it matches the other criteria.

     Implemented a similar technique for krb5_lcc_store().  Since we
     can not write to the cache, when a store request is made we 
     instead perform a ticket request through the lsa for a matching
     credential.  If we receive one, we return success.  Otherwise,
     we return the KRB5_CC_READONLY error.

   With these changes I am now able to operate entirely with the MSLSA
   ccache as the default cache provided the MS LSA credentials are
   for the principal I wish to use.  Obviously, one cannot change
   principals while the MSLSA ccache is the default.

2003-12-15  Jeffrey Altman <jaltman@mit.edu>

   * cc_msla.c:   Enable purging of the MS Kerberos LSA cache when the TGT
     has expired.  This will force the LSA to get a new TGT instead of 
     returning the expired version.

2003-12-15  Jeffrey Altman <jaltman@mit.edu>

   * cc_mslsa.c:  Perform a GetMSTGT() call as part of krb5_lcc_start_seq_get
     to ensure that the tgt is refreshed

2003-12-13  Jeffrey Altman <jaltman@mit.edu>

   * Makefile.in: Remove extranenous spaces in ##WIN32## constructs
     defining MSLSA_SRC MSLSA_OBJ

2003-12-12  Tom Yu  <tlyu@mit.edu>

	* Makefile.in: Move ##WIN32## constructs from inside
	backslash-continued lists, as it was breaking them.  Move explicit
	dependency information from under automatic dependencies.

2003-12-11  Jeffrey Altman <jaltman@mit.edu>

    * Makefile.in, ccbase.c, cc_mslsa.c (new)

    Remove all of the code which was duplicated between ms2mit.c
    and the KfW Leash libraries (and who knows how many applications
    shipped by third parties) and use it as the basis for a new
    krb5_ccache type, "MSLSA:".  The "MSLSA:" ccache type is a
    read-only ccache which can be used either as a monitor of the
    contents of the Microsoft LSA cache or as a source for copying
    the contents to another ccache type.  The purpose of migrating
    this code to the krb5_32.dll is to avoid the need for applications
    to be consistently updated each time Microsoft makes a change
    to the behavior of the LSA cache.  Changes have occurred with
    the release of 2000, XP, and 2003 so far.  Also, the code for
    working with the MS LSA cache is not well documented and many
    mistakes were made in the original versions of the ms2mit.c
    code base.  Unfortunately, the ms2mit.c code has been copied
    into many other applications.  

    With access to this new ccache type, the ms2mit.c source file
    is reduced from 890 lines to 80 lines including the copyright
    banner.

2003-11-26  Jeffrey Altman <jaltman@mit.edu>

    * cc_default.c: Add support for Leash Kinit Dialog on Windows to
            krb5int_c_default()

2003-07-22  Sam Hartman  <hartmans@mit.edu>

	* ccbase.c: Always register the file credentials cache type.  If
	we do not, then when USE_CCAPI is defined, it will not be
	available. 

2003-03-06  Alexandra Ellwood <lxs@mit.edu>

    * ccdefault.c: Remove Mac header goober and include
    k5-int.h after KerberosLoginPrivate.h.

2003-01-10  Ken Raeburn  <raeburn@mit.edu>

	* Makefile.in: Add AC_SUBST_FILE marker for libobj_frag.

2003-01-07  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c (krb5_cc_file_ops, krb5_fcc_ops): Now const.
	* fcc.h (krb5_cc_file_ops): Update decl.
	* cc_memory.c (krb5_mcc_ops): Now const.
	* ccbase.c (krb5_mcc_ops): Update decl.
	* ccdefops.c (krb5_cc_dfl_ops): Now points to const.
	* t_cc.c (krb5_fcc_ops, krb5_mcc_ops): Update decls.

2002-09-03  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c, cc_memory.c, cc_retr.c, ccbase.c, cccopy.c,
	ccdefault.c, ser_cc.c, t_cc.c: Use prototype style function
	definitions.

2002-08-29  Ken Raeburn  <raeburn@mit.edu>

	* Makefile.in: Revert $(S)=>/ change, for Windows support.

2002-08-23  Ken Raeburn  <raeburn@mit.edu>

	* Makefile.in: Change $(S)=>/ and $(U)=>.. globally.

2002-08-15  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c (ALLOC): Use calloc, not malloc.
	(krb5_fcc_read_principal): Check bounds on number of components
	before calling ALLOC.

2002-08-15  Tom Yu  <tlyu@mit.edu>

	* t_cc.c: Remove references to STDIO ccache.

2002-08-14  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c: Merge in cc_stdio.c, under preprocessor test for
	USE_STDIO.
	(USE_STDIO): Define it if HAVE_SYS_TYPES_H.
	(krb5_change_cache, krb5_get_notification_message): Always
	define.
	(ALLOC): New macro, with overflow checking.
	(krb5_fcc_read_principal, krb5_fcc_read_addrs,
	krb5_fcc_read_authdata): Use it, and fix other overflow checks.
	(my_fopen): Support non-Mac environments.
	(krb5_fcc_open_file) [USE_STDIO]: Always use my_fopen.
	(NO_FILE): New macro.  All functions changed to test or assign it
	rather than -1 or (FILE*)NULL.
	(krb5_fcc_read_keyblock, krb5_fcc_read_data): Rewrite bounds
	check.
	(BINARY_MODE): Always define.
	(setvbuf) [!HAVE_SETVBUF]: Define as macro using setbuf.
	(krb5_fcc_open_file): Change file descriptor variable to "f" and
	combine newly matching stdio and file sections.  Use setvbuf
	instead of checking whether to use setbuf.

	* cc_stdio.c: Deleted.
	* Makefile.in (STLIBOBJS, OBJS, SRCS): Updated.
	* ccdefops.c (krb5_cc_dfl_ops) [!USE_CCAPI]: Always use
	krb5_fcc_ops.

2002-08-09  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c: All functions except krb5_change_cache and
	krb5_get_notification_message now static.  Minor other shuffling
	to become more similar to cc_stdio.c.
	(krb5_fcc_data): Rename "fd" to "file"; change all uses.
	* cc_stdio.c: All functions now static.  Rename all krb5_scc_
	functions, data types and macros to use krb5_fcc_ prefix instead.
	Minor other shuffling to become more similar to cc_file.c.
	(krb5_fcc_data): Rename from krb5_scc_data; reorder some fields.
	(krb5_fcc_close_file): Never call fflush on a read-only file.
	(BINARY_MODE): New macro.
	(krb5_fcc_open_file): Combine ANSI_STDIO and non-ANSI cases
	statements by using BINARY_MODE and compile-time string
	concatenation.  Choose lock flag value separately from call to
	krb5_lock_file.
	(krb5_fcc_generate_new): Use BINARY_MODE.

2002-07-09  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c: Put # for cpp directives in first column.

2002-60-20  Danilo Almeida  <dalmeida@mit.edu>

	* Makefile.in: Build cc accessor functions on Windows.
	[pullup from 1-2-2-branch]

2002-06-20 Alexandra Ellwood <lxs@mit.edu>

	* ccdefault.c: updated to new KLL function name

	* ccdefault.c: swapped include of KerberosLoginPrivate with
	k5-int.h to avoid problems with including CoreServices.h after
	profile.h and krb.h

	* ccdefault.c: Updated Mac OS X headers to new framework layout

	* ccdefops.c: created #define for USE_CCAPI now that both Mac OS 9
	and Mac OS 10 use ccapi.

	[pullups from 1-2-2-branch]

2002-04-10  Danilo Almeida  <dalmeida@mit.edu>

	* cc_file.c: Use _WIN32 instead of _WINSOCKAPI_ because
	_WINSOCKAPI_ depends on the Winsock header used (i.e., Winsock 2
	does not define this).  What we are really trying to check for is
	Win32.  Include port-sockets.h for Win32.  (NOTE: Why is
	NEED_SOCKETS being defined after the inclusion of k5-int.h?  That
	is pretty useless...  What we probably should do is more
	consitently used NEED_SOCKETS instead of manually putting in
	network code.  However, some people would probably have issues
	with the build being slower...)

2001-10-10  Ezra Peisach  <epeisach@mit.edu>

	* cc_file.c (krb5_fcc_read): Remove const from fourth argument to
	function to match prototype earlier in file.

2001-10-09  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c, cc_memory.c, cc_stdio.c, ser_cc.c: Make prototypes
	unconditional.

2001-10-05  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c, cc_stdio.c: Delete _MSDOS (win16) support.

	* cc_memory.c, ccbase.c, ccdefault.c, ccfns.c: Don't explicitly
	declare pointers FAR any more.

2001-10-03  Ken Raeburn  <raeburn@mit.edu>

	* cc_file.c, ccbase.c, cccopy.c, ccdefault.c, fcc.h, ser_cc.c:
	Don't use KRB5_DLLIMP.

2000-10-30  Tom Yu  <tlyu@mit.edu>

	* cc_stdio.c: Add a "mode" field to krb5_scc_data to keep track of
	what mode the file was opened in.
	(krb5_scc_close_file): Ignore EBADF from fflush() if the file was
	opened for readonly access.  For some reason NetBSD's fflush()
	exhibits this behavior.
	(krb5_scc_open_file): Save the mode with which the file was opened
	in data->mode.

2000-10-17  Ezra Peisach  <epeisach@mit.edu>

	* cc_stdio.c, cc_file.c: Unsigned/signed int cleanup.

2000-10-03  Ezra Peisach  <epeisach@mit.edu>

	* ser_cc.c (krb5_ccache_externalize): Use krb5_cc_get_name instead
	of krb5_rc_get_name on credential cache.

	* cc_file.c (krb5_fcc_get_name): 
	* cc_stdio.c (krb5_scc_get_name): 
	* cc_memory.c (krb5_mcc_get_name): 
	* ccfns.c (krb5_cc_get_name): Declare as returning const char *.

2000-09-25  Ezra Peisach  <epeisach@mit.edu>

	* cc_file.c ccbase.c, cc_stdio.c, cc_retr.c, cc_memory.c: More
	signed/unsigned fixes.

Sat Sep 23 23:42:32 2000  Ezra Peisach  <epeisach@mit.edu>

	* t_cc.c: Code cleanup. Test more failure modes of the cache library. 

	* cccopy.c (krb5_cc_copy_creds): Memory leak. Call krb5_cc_end_seq_get.

	* cc_file.c (krb5_fcc_generate_new): Set flags to
 	KRB5_TC_OPENCLOSE, otherwise parts of the library assumes that the
 	file is open, when it is not.

	* cc_stdio.c (krb5_scc_generate_new): Same as cc_file.c change.
	

2000-09-22  Ezra Peisach  <epeisach@mit.edu>

	* Makefile.in (check-unix): Build and exectute t_cc.

	* t_cc.c: Test harness for memory, stdio and file caches. 

2000-07-20  Danilo Almeida  <dalmeida@mit.edu>

	* cc_file.c, cc_stdio.c: Remove unused krb5_[fs]cc_default_name()
	prototype.

	* cc_stdio.c: Fix calling convention for op functions.

	* ccfns.c (krb5_cc_get_type): Fix calling convention.

	* Makefile.in: Change ${CC} and ${OBJS} to $(CC) and $(OBJS) so
	nmake does not freak out.

2000-07-19  Ken Raeburn  <raeburn@mit.edu>

	* cc_memory.c (mcc_head): Combine static declaration and
	initialization.

2000-07-14  Ken Raeburn  <raeburn@mit.edu>

	* t_stdio.c, t_file.c, t_memory.c: Test cases copied from old
	subdirectories.  Currently unused.
	* Makefile.in (t_stdio): New target, basically same as 'test' in
	old stdio/Makefile.in.
	* file, memory, stdio: Subdirectories deleted.

	* cc_file.c, cc_stdio.c, cc_memory.c: New files, built from source
	files of appropriate subdirectories.
	* fcc.h, scc.h: New files, copied from subdirectories; temporary.
	* ccfns.c: New file, implementing what used to be krb5_cc_* macros
	in krb5.h.
	* Makefile.in (STLIBOBJS, OBJS, SRCS): Updated.
	(LOCAL_SUBDIRS): Now empty.
	(LOCALINCLUDES): Remove file and stdio subdirs.
	(MAC_SUBDIRS): Remove file, stdio, memory.
	(##DOS## stuff, clean-windows): Delete file and memory parts.

	* cc_memory.c (mcc_head): Now static.

2000-06-28  Ezra Peisach  <epeisach@mit.edu>

	* ccdefault.c: Add newline at end of file (compiler warning)

2000-5-31	Alexandra Ellwood <lxs@mit.edu>

	* ccdefault.c: Changed kerberosPrincipal_V5 to kerberosVersion_V5
	to reflect the new constant name.

2000-4-26	Alexandra Ellwood <lxs@mit.edu>

	* ccdefault.c: Added version number to internal Kerberos Login
	Library routine.

2000-4-13	Alexandra Ellwood <lxs@mit.edu>

	* ccdefault.c: Added Kerberos Login library support (with ifdefs
	to control whether or not it is on.  Also added support to store a
	krb5_principal in the os_context along with the default ccache
	name (if known, this principal is the same as the last time we
	looked at the ccache.  * ccdefname.c: Added support to store a
	krb5_principal in the os_context along with the default ccache
	name (if known, this principal is the same as the last time we
	looked at the ccache.

1999-10-26  Wilfredo Sanchez  <tritan@mit.edu>

	* Makefile.in: Clean up usage of CFLAGS, CPPFLAGS, DEFS, DEFINES,
	LOCAL_INCLUDES such that one can override CFLAGS from the command
	line without losing CPP search patchs and defines. Some associated
	Makefile cleanup.

1999-08-23  Ken Raeburn  <raeburn@mit.edu>

	* cc_retr.c: New file.
	(krb5_cc_retrieve_cred_seq): New function, derived from
	fcc_retrieve but takes an optional list of enctypes to look for in
	priority order.
	(krb5_cc_retrieve_cred_default): New function.  Same signature as
	original fcc_retrieve but if new flag KRB5_TC_SUPPORTED_KTYPES is
	set, calls krb5_get_tgs_ktypes to get a list of enctypes to look
	for.
	* Makefile.in (STLIBOBJS, OBJS, SRCS): Add it.

Tue May 18 19:52:56 1999  Danilo Almeida  <dalmeida@mit.edu>

	* Makefile.in: Remove - from recursive Win32 make invocation.

Mon May 17 14:11:45 1999  Danilo Almeida  <dalmeida@mit.edu>

	* Makefile.in: Clean ccapi subdirectory in clean-windows target.

Mon May 10 15:24:08 1999  Danilo Almeida  <dalmeida@mit.edu>

	* Makefile.in: Do win32 build in subdir.

1999-03-31  Theodore Ts'o  <tytso@rsts-11.mit.edu>

	* ccdefops.c: Change the default ccache type under windows to be
		original FILE ccache type; this will get set to ccapi if
		the krbcc32.dll can be found.

Mon Feb  8 21:53:37 1999  Theodore Y. Ts'o  <tytso@mit.edu>

	* Makefile.in: Enable the ccapi directory for windows builds.  

	* ccdefops.c: Make the ccapi the default ccache type for Windows
		machines.

1999-01-26  Theodore Ts'o  <tytso@rsts-11.mit.edu>

	* Makefile.in: Add ccapi to the include path so we can find stdcc.h

1998-11-13  Theodore Ts'o  <tytso@rsts-11.mit.edu>

	* Makefile.in: Set the myfulldir and mydir variables (which are
		relative to buildtop and thisconfigdir, respectively.)

Sat Dec  5 01:20:31 1998  Theodore Y. Ts'o  <tytso@mit.edu>

	* Makefile.in, ccdefops.c: Temporarily back out the ccapi ccache
		under Windows so we can make sure the rest of the krb5
		tree builds correctly under Windows.  (Note: I didn't
		revert lib/krb5/os/ccdefname.c, so setting KRB5_CC_NAME to
		FILE:C:\tmp\tkt is required to make things work.)

1998-08-24  Theodore Ts'o  <tytso@rsts-11.mit.edu>

	* Makefile.in: Add windows build instructions to build CCache API
		Cache implementation. 

Fri Aug 20 18:30:00 1998  Miro Jurisic  <meeroh@mit.edu>
	* Added Frank's CCache API cache implementation and made
		it default on the Mac

Thu Jul 30 13:12:30 1998  Sam Hartman  <hartmans@utwig.mesas.com>

	* ccbase.c: Enable memory ccache (merge adapted from Kerbnet)

1998-05-27  Theodore Ts'o  <tytso@rsts-11.mit.edu>

	* Makefile.in: Add ccache/memory as a directory to be recursively
		built by this makefile under Windows.

Fri Feb 27 18:03:33 1998  Theodore Ts'o  <tytso@rsts-11.mit.edu>

	* Makefile.in: Changed thisconfigdir to point at the lib/krb5
 		directory, since we've moved the configure.in tests in
 		this directory to the toplevel lib/krb5 configure.in

Wed Feb 18 16:19:12 1998  Tom Yu  <tlyu@mit.edu>

	* Makefile.in: Remove trailing slash from thisconfigdir.  Fix up
	BUILDTOP for new conventions.

Thu Feb 12 16:17:46 1998  Tom Yu  <tlyu@mit.edu>

	* configure.in: Add commented out AC_OUTPUT to force autoreconf to
	rebuild the configure script.

Wed Feb 11 22:56:49 1998  Theodore Ts'o  <tytso@rsts-11.mit.edu>

	* Makefile.in: Define BUILDTOP and thisconfigdir in the Makefile

	* configure.in: Create the makefiles for all of the subdirectories
		and move all of the configure.in tests from the
		subdirectories into this configure.in.

Sat Dec  6 02:26:16 1997  Tom Yu  <tlyu@mit.edu>

	* Makefile.in: Add cccopy.c.

	* cccopy.c: New file; krb5_cc_copy_creds from Cygnus.

Mon Sep 15 15:14:16 1997  Ezra Peisach  <epeisach@mit.edu>

	* ccbase.c (krb5_cc_resolve): Incoming cache name is const.

Thu Nov 21 11:55:16 EST 1996    Richard Basch   <basch@lehman.com>

        * Makefile.in: win32 build

	* ccbase.c, ccdefault.c:
	DLL export basic ccache functions

Thu Jan  2 16:57:35 1997  Tom Yu  <tlyu@mit.edu>

	* Makefile.in:
	* configure.in: Update to new lib build procedure.

Thu Jun  6 00:04:38 1996  Theodore Y. Ts'o  <tytso@mit.edu>

	* Makefile.in (all-windows): Don't pass $(LIBCMD) on the command
		line.  It's set in the windows.in prologue for all
		Makefiles anyway.

Wed Feb  7 00:23:18 1996  Theodore Y. Ts'o  <tytso@dcl>

	* Makefile.in: Folded in danw's changes to allow
		building Makefiles for the Macintosh.  We now can build
		MPW makefiles which are interpreted by CodeWarrior.

Fri Nov  3 21:12:31 1995  Theodore Y. Ts'o  <tytso@dcl>

	* configure.in: Added memory subdirectory

Fri Oct  6 22:03:30 1995  Theodore Y. Ts'o  <tytso@dcl>

	* Makefile.in: Remove ##DOS!include of config/windows.in.
		config/windows.in is now included by wconfig.

Mon Sep 25 16:56:30 1995  Theodore Y. Ts'o  <tytso@dcl>

	* Makefile.in: Removed "foo:: foo-$(WHAT)" lines from the
		Makefile. 

Tue Aug 29 13:35:23 EDT 1995	Paul Park	(pjpark@mit.edu)
	* Makefile.in, .Sanitize, ser_cc.c - Add new ccache handle serialization
		routines.

Fri Jun  9 19:31:13 1995    <tytso@rsx-11.mit.edu>

	* configure.in: Remove standardized set of autoconf macros, which
		are now handled by CONFIG_RULES.  Use DO_SUBDIRS to
		recurse down subdirectories.

Fri May 26 20:19:26 1995  Theodore Y. Ts'o  (tytso@dcl)

	* configure.in, Makefile.in: Add support for building shared libraries.

Thu Apr 13 15:49:16 1995 Keith Vetter (keithv@fusion.com)

	* ccbase.c: removed unneeded INTERFACE from non-api functions.

Wed Mar 22 11:47:49 1995    <tytso@rsx-11.mit.edu>

	* Makefile.in (CFLAGS): Make -I options work when the build and
		source tree are different.

Fri Mar 17 19:19:07 1995  John Gilmore  (gnu at toad.com)

	* Makefile.in (LDFLAGS):  Remove, duplicates config/pre.in.
	(CFLAGS):  Add -I options for file and stdio, to avoid paths in
	#include statements.
	(all-mac, clean-mac):  Add.
	* ccdefops.c:  Avoid includes with pathnames, since they don't work
	on the Mac.  Configure the default cache based on whether the
	system has <sys/types.h> (which defines types for low-level file
	operations, among other things).
	* configure.in (CONFIG_DIRS):  Build stdio before file, for Mac
	convenience (where file doesn't build).

Wed Mar 15 20:23:17 1995 Keith Vetter (keithv@fusion.com)

	* Makefile.in: cleaned up for the PC

Tue Mar  7 19:53:05 1995  Mark Eichin  <eichin@cygnus.com>

	* configure.in: take out ISODE_DEFS.

Tue Mar 7 15:55:12 1995 Keith Vetter (keithv@fusion.com)

	* ccbase.c, ccdefault.c: added window INTERFACE keyword.
        * Makefile.in: made to work on the PC.

Tue Feb 28 00:35:33 1995  John Gilmore  (gnu at toad.com)

	* ccbase.c, ccdefault.c:  Avoid <krb5/...> includes.

Fri Jan 13 15:23:47 1995  Chris Provenzano (proven@mit.edu)

    * Added krb5_context to all krb5_routines 

Thu Oct 13 17:23:08 1994  Theodore Y. Ts'o  (tytso@maytag)

	* configure.in: Add ISODE_DEFS

