Javascript required to view site-wide navigation bar. >> View Alternative Site Navigation
201 INCLUDING A DYNAMOELECTRIC MACHINE
202 Balancer sets
203 With plural sets of slip rings or brushes
204 Condition responsive
205 FOR REACTIVE POWER CONTROL
206 Using saturable inductor
207 Using converter
208 Using impedance
209 Switched impedance
210 Static switch
211 Digitally controlled
212 FOR PHASE SHIFT OR CONTROL
213 By splitting and combining
214 Using saturable inductor
215 Using transformer
216 With movable structure or winding
217 Using a three or more terminal semiconductive device
218 Using impedance
220 IN SHUNT WITH SOURCE OR LOAD
221 Photo responsive
222 Using choke and switch across source
223 Using a three or more terminal semiconductive device
224 With additional series regulator
225 Plural devices
226 Linearly acting
227 Using electronic tube
228 With additional series regulator
229 Using diode
230 Inverse parallel
232 Using inductor
233 Using impedance
234 OUTPUT LEVEL RESPONSIVE
235 Zero switching
236 Nonelectrical condition sensing
237 Phase controlled switching using electronic tube or a three or more terminal semiconductive device
238 With soft start
239 Including single unidirectional element with bidirectional pass
240 Including saturable inductor in trigger circuit
241 With digital control
242 Including ramp generator or controlled capacitor charging
243 As input to comparator
244 With synchronization
245 With nonelectrical condition sensing
246 With plural condition sensing
247 Using a transformer or inductor as the final control device
248 Ferroresonant
249 Controllably saturable
250 With specific core structure (e.g., gap, aperture, slot, permanent magnet)
251 With plural power windings
252 In bridge configuration or in bridge arm
253 On different cores
254 With electronic tube or a three or more terminal semiconductive device in control circuit
255 Having a variable length winding (e.g., tapped) as the final control device
256 With motor driven tap switch
257 Including an electronic tube or a three or more terminal semiconductive device in control circuit
258 With electronic tube or a three or more terminal semiconductive device as tap switch
259 Having a winding in series with the source and load (e.g., buck-boost)
260 With motor in control circuit
261 With saturable reactor in control circuit
262 Plural windngs in series
263 With electronic tube or a three or more terminal semiconductive device in control circuit
264 Having movable structure or winding
265 Using a three or more terminal semiconductive device as the final control device
266 Including pre or post regulation
267 Including plural loads commonly controlled
268 Including plural final control devices
269 Linearly acting parallel connected
270 Linearly acting series connected
271 Switched (e.g., on-off control)
272 Parallel connected
273 Linearly acting
274 With threshold detection
275 With plural condition sensing
276 For protective system
277 With current sensor
278 Having base-emitter of transistor coupled across sensor
279 Including final control device parameter
280 With a specific feedback amplifier (e.g., integrator, summer)
281 With reference voltage circuitry
282 Switched (e.g., switching regulators)
283 Digitally controlled
284 With threshold detection
285 With plural condition sensing
286 Including filter sensing
287 In flyback path
288 With ramp generator or controlled capacitor charging
289 With base drive control dissipation
290 With inductor in control circuit
291 Using an electronic tube as the final control device
292 With a three or more terminal semiconductive device in control circuit
293 Using an impedance as the final control device
294 Hall effect device, magnetoresistor or thermistor
295 Pressure sensitive resistor
296 Liquid contact resistor
297 Plural selective resistors
298 Variable resistor
299 INPUT LEVEL RESPONSIVE
300 Phase controlled switching using electronic tube or a three or more terminal semiconductive device
301 Using a transformer or inductor as the final control device
303 Using a linearly acting final control device
304 SELF-REGULATING (E.G., NONRETROACTIVE)
305 Using a transformer or inductor as the final control device
306 Ferroresonant
307 With plural cores
308 With core having an air gap or magnetic shunt
309 Including a ferrocapacitor across a tertiary winding
310 Controllably saturable
311 Using a three or more terminal semiconductive device as the final control device
312 For current stabilization
313 To derive a voltage reference (e.g., band gap regulator)
314 With additional stage
315 Including parallel paths (e.g., current mirror)
316 With amplifier connected to or between current paths
317 With switched final control device
318 EXTERNAL OR OPERATOR CONTROLLED
319 Zero switching
320 Phase controlled switching using electronic tube or a three or more terminal semiconductive device
321 With soft start
322 With digital control
323 With interval timer
324 Using single unidirectional element with bidirectional pass
325 With a three or more terminal semiconductive device in trigger circuit
326 Including ramp generator or controlled capacitor charging
327 With passive element only in trigger circuit
328 Using a transformer or inductor as the final control device
329 Controllably saturable
330 With permanent magnet
331 With core having a gap, aperture, or slot
332 With plural power windings
333 In bridge configuration or in bridge arm
334 On different legs of single core
335 On different cores
338 With plural cores
339 Including an electronic tube or a three or more terminal semiconductive device in control circuit
340 Having a variable length winding (e.g., tapped) as the final control device
341 With motor driven tap switch
342 With other transformer
343 With a three or more terminal semiconductive device
344 Having a windng in series with the source and load (e.g., buck-boost)
345 Having a switch in series with winding
346 Having series-parallel connectable windings
347 Having movable structure or winding
348 Including rotary motion
349 Using a three or more terminal semiconductive device as the final control device
350 Including plural final control devices
351 Switched (e.g., switching regulators)
352 Using an impedance as the final control device
355 INCLUDING A TRANSFORMER OR AN INDUCTOR
356 With compensation
357 For current transformer
358 Current transformer
359 Potential transformer
360 Superconductive
361 Polyphase or plural transformers
362 With core having permanent magnet or air gap
363 Inductor with or in a bridge
364 INCLUDING AN IMPEDANCE
365 In a bridge
367 Resistor only
368 Hall effect device or magnetoresistor
369 Thermistor or resistor
370 With capacitor
371 MISCELLANEOUS
901 STARTING CIRCUITS
902 OPTICAL COUPLING TO SEMICONDUCTOR
903 PRECIPITATORS
904 TOUCH SYSTEMS
905 LAMP DIMMER STRUCTURE
906 SOLAR CELL SYSTEMS
907 TEMPERATURE COMPENSATION OF SEMICONDUCTOR
908 INRUSH CURRENT LIMITERS
909 REMOTE SENSING
910 TWO OF THREE PHASES REGULATED
911 MEDICAL ELECTRONICS
FOR000 CLASS-RELATED FOREIGN DOCUMENTS
This file produced by USPTO - SIRA - Office of Patent Automation - Reference
Tools Project
Contact: United States Patent and Trademark Office - Classification Operations
Crystal Park 3, Suite 902 Washington, DC 20231 phone: (703) 305-5107
For questions and comments please e-mail .
Note: The Patent
and Trademark Depository Library Program (PTDLP) administers a nationwide
network of public, state and academic libraries designated as Patent and
Trademark Depository Libraries authorized by 35 U.S.C. 13 to: Disseminate
Patent and Trademark Information Support Diverse Intellectual Property
Needs of the Public
Contact: United States Patent and Trademark Office - PTDLP Crystal Park
3, Suite 481 Washington, DC 20231 Fax: (703) 306-2662
Note: For information/comments on electronic information products, such
as purchasing USPTO data, or to discuss system requirements for magnetic
tape products, contact:
Information Products Division -- U.S. Patent and Trademark Office
Information Products Division
PK3- Suite 441 Washington, DC 20231
tel: (703) 306-2600 FAX: (703) 306-2737 email: oeip@uspto.gov
Or, browse
their on-line catalog.
The Inventors
Assistance Center is available to help you on patent
matters. Send questions about USPTO programs and services
to the USPTO
Contact Center (UCC) . You can suggest USPTO webpages
or material you would like featured on this section by E-mail
to the webmaster@uspto.gov .
While we cannot promise to accommodate all requests, your suggestions
will be considered and may lead to other improvements on the
website.
javascript displays date of file obtained from webserver