Chapter 34. Upgrading from Samba-2.x to Samba-3.0.20

Jelmer R. Vernooij

The Samba Team

John H. Terpstra

Samba Team

Gerald (Jerry) Carter

Samba Team

June 30, 2003

Table of Contents

Quick Migration Guide
New Features in Samba-3
Configuration Parameter Changes
Removed Parameters
New Parameters
Modified Parameters (Changes in Behavior)
New Functionality
TDB Data Files
Changes in Behavior
Passdb Backends and Authentication
LDAP

This chapter deals exclusively with the differences between Samba-3.0.20 and Samba-2.2.8a. It points out where configuration parameters have changed, and provides a simple guide for the move from 2.2.x to 3.0.20.

Quick Migration Guide

Samba-3.0.20 default behavior should be approximately the same as Samba-2.2.x. The default behavior when the new parameter passdb backend is not defined in the smb.conf file provides the same default behavior as Samba-2.2.x with encrypt passwords = Yes and will use the smbpasswd database.

So why say that behavior should be approximately the same as Samba-2.2.x? Because Samba-3.0.20 can negotiate new protocols, such as support for native Unicode, that may result in differing protocol code paths being taken. The new behavior under such circumstances is not exactly the same as the old one. The good news is that the domain and machine SIDs will be preserved across the upgrade.

If the Samba-2.2.x system is using an LDAP backend, and there is no time to update the LDAP database, then make sure that passdb backend = ldapsam_compat is specified in the smb.conf file. For the rest, behavior should remain more or less the same. At a later date, when there is time to implement a new Samba-3-compatible LDAP backend, it is possible to migrate the old LDAP database to the new one through use of the pdbedit. See The pdbedit Command.

New Features in Samba-3

The major new features are:

  1. Active Directory support. This release is able to join an ADS realm as a member server and authenticate users using LDAP/Kerberos.

  2. Unicode support. Samba will now negotiate Unicode on the wire, and internally there is a much better infrastructure for multibyte and Unicode character sets.

  3. New authentication system. The internal authentication system has been almost completely rewritten. Most of the changes are internal, but the new authoring system is also very configurable.

  4. New filename mangling system. The filename mangling system has been completely rewritten. An internal database now stores mangling maps persistently.

  5. New “net” command. A new “net” command has been added. It is somewhat similar to the “net” command in Windows. Eventually, we plan to replace a bunch of other utilities (such as smbpasswd) with subcommands in “net”.

  6. Samba now negotiates NT-style status32 codes on the wire. This considerably improves error handling.

  7. Better Windows 200x/XP printing support, including publishing printer attributes in Active Directory.

  8. New loadable RPC modules for passdb backends and character sets.

  9. New default dual-daemon winbindd support for better performance.

  10. Support for migrating from a Windows NT 4.0 domain to a Samba domain and maintaining user, group, and domain SIDs.

  11. Support for establishing trust relationships with Windows NT 4.0 domain controllers.

  12. Initial support for a distributed Winbind architecture using an LDAP directory for storing SID to UID/GID mappings.

  13. Major updates to the Samba documentation tree.

  14. Full support for client and server SMB signing to ensure compatibility with default Windows 2003 security settings.

Plus lots of other improvements!

Configuration Parameter Changes

This section contains a brief listing of changes to smb.conf options since the Samba-2.2.x series up to an including Samba-3.0.21. Please refer to the smb.conf(5) man page for complete descriptions of new or modified parameters.

Removed Parameters

In alphabetical order, these are the parameters eliminated from Samba-2.2.x through 3.0.21.

  • admin log

  • alternate permissions

  • character set

  • client codepage

  • code page directory

  • coding system

  • domain admin group

  • domain guest group

  • enable svcctl

  • force unknown acl user

  • ldap filter

  • min password length

  • nt smb support

  • post script

  • printer admin

  • printer driver

  • printer driver file

  • printer driver location

  • read size

  • source environment

  • status

  • strip dot

  • total print jobs

  • unicode

  • use rhosts

  • valid chars

  • vfs options

  • winbind enable local accounts

New Parameters

New parameters in the Samba 3.0.0 series prior to release of Samba 3.0.20 are grouped by function):

Remote Management

  • abort shutdown script

  • shutdown script

User and Group Account Management

  • add group script

  • add machine script

  • add user to group script

  • algorithmic rid base

  • delete group script

  • delete user from group script

  • passdb backend

  • rename user script

  • set primary group script

  • username map script

Authentication

  • auth methods

  • ldap password sync

  • passdb expand explicit

  • realm

Protocol Options

  • afs token lifetime

  • client lanman auth

  • client NTLMv2 auth

  • client schannel

  • client signing

  • client use spnego

  • defer sharing violations

  • disable netbios

  • enable privileges

  • use kerberos keytab

  • log nt token command

  • ntlm auth

  • paranoid server security

  • sendfile

  • server schannel

  • server signing

  • smb ports

  • svcctl list

  • use spnego

File Service

  • allocation roundup size

  • acl check permissions

  • acl group control

  • acl map full control

  • aio read size

  • aio write size

  • dfree cache time

  • dfree command

  • ea support

  • enable asu support

  • force unknown acl user

  • get quota command

  • hide special files

  • hide unwriteable files

  • inherit owner

  • hostname lookups

  • kernel change notify

  • mangle prefix

  • map acl inherit

  • map read only

  • max stat cache size

  • msdfs proxy

  • set quota command

  • store dos attributes

  • use sendfile

  • vfs objects

Printing

  • cups options

  • cups server

  • force printername

  • iprint server

  • max reported print jobs

  • printcap cache time

Unicode and Character Sets

  • display charset

  • dos charset

  • UNIX charset

SID to UID/GID Mappings

  • idmap backend

  • idmap gid

  • idmap uid

  • username map script

  • winbind nested groups

  • winbind nss info

  • winbind trusted domains only

  • template primary group

  • enable rid algorithm

LDAP

  • ldap delete dn

  • ldap group suffix

  • ldap idmap suffix

  • ldap machine suffix

  • ldap passwd sync

  • ldap replication sleep

  • ldap timeout

  • ldap user suffix

General Configuration

  • eventlog list

  • preload modules

  • reset on zero vc

  • privatedir

Modified Parameters (Changes in Behavior)

  • dos filetimes (enabled by default)

  • encrypt passwords (enabled by default)

  • mangling method (set to hash2 by default)

  • map to guest

  • only user (deprecated)

  • passwd chat

  • passwd program

  • password server

  • restrict anonymous (integer value)

  • security (new ads value)

  • strict locking (enabled by default)

  • winbind cache time (increased to 5 minutes)

  • winbind uid (deprecated in favor of idmap uid)

  • winbind gid (deprecated in favor of idmap gid)

  • winbindd nss info

  • write cache (deprecated)

New Functionality

The major changes in behavior since that Samba-2.2.x series are documented in this section. Please refer to the WHATSNEW.txt file that ships with every release of Samba to obtain detailed information regarding the changes that have been made during the life of the current Samba release.

TDB Data Files

Refer to Installation, Chapter 1, Chapter 1 for information pertaining to the Samba-3 data files, their location and the information that must be preserved across server migrations, updates and upgrades.

Please remember to back up your existing ${lock directory}/*tdb before upgrading to Samba-3. If necessary, Samba will upgrade databases as they are opened. Downgrading from Samba-3 to 2.2, or reversion to an earlier version of Samba-3 from a later release, is an unsupported path.

The old Samba-2.2.x tdb files are described in the next table.

Table 34.1. Samba-2.2.x TDB File Descriptions

NameDescriptionBackup?
account_policyUser policy settingsyes
brlockByte-range file locking information.no
connections

Client connection information

no
lockingTemporary file locking data.no
messages

Temporary storage of messages being processed by smbd.

no
ntdrivers

Stores per-printer driver information.

yes
ntforms

Stores per-printer forms information.

yes
ntprinters

Stores the per-printer devmode configuration settings.

yes
printing/*.tdb

Cached output from lpq command created on a per-print-service basis.

no
registry

Read-only Samba registry skeleton that provides support for exporting various database tables via the winreg RPCs.

no
sessionid

Temporary cache for miscellaneous session information.

no
share_infoShare ACL settings.yes
unexpected

Packets received for which no process was listening.

no
winbindd_cache

Cache of identity information received from an NT4 or an ADS domain.

yes
winbindd_idmap

New ID map table from SIDS to UNIX UIDs/GIDs.

yes

Changes in Behavior

The following issues are known changes in behavior between Samba-2.2 and Samba-3 that may affect certain installations of Samba.

  1. When operating as a member of a Windows domain, Samba-2.2 would map any users authenticated by the remote DC to the “guest account” if a UID could not be obtained via the getpwnam() call. Samba-3 rejects the connection with the error message “NT_STATUS_LOGON_FAILURE.” There is no current workaround to re-establish the Samba-2.2 behavior.

  2. When adding machines to a Samba-2.2 controlled domain, the “add user script” was used to create the UNIX identity of the machine trust account. Samba-3 introduces a new “add machine script” that must be specified for this purpose. Samba-3 will not fall back to using the “add user script” in the absence of an “add machine script”.

Passdb Backends and Authentication

There have been a few new changes that Samba administrators should be aware of when moving to Samba-3.

  1. Encrypted passwords have been enabled by default in order to interoperate better with out-of-the-box Windows client installations. This does mean that either (a) a Samba account must be created for each user, or (b) “encrypt passwords = no” must be explicitly defined in smb.conf.

  2. Inclusion of new security = ads option for integration with an Active Directory domain using the native Windows Kerberos 5 and LDAP protocols.

Samba-3 also includes the possibility of setting up chains of authentication methods (auth methods) and account storage backends (passdb backend). Please refer to the smb.conf man page and Account Information Databases, for details. While both parameters assume sane default values, it is likely that you will need to understand what the values actually mean in order to ensure Samba operates correctly.

Certain functions of the smbpasswd tool have been split between the new smbpasswd utility, the net tool, and the new pdbedit utility. See the respective man pages for details.

LDAP

This section outlines the new features effecting Samba/LDAP integration.

New Schema

A new object class (sambaSamAccount) has been introduced to replace the old sambaAccount. This change aids in the renaming of attributes to prevent clashes with attributes from other vendors. There is a conversion script (examples/LDAP/convertSambaAccount) to modify an LDIF file to the new schema.

Example:

		$ ldapsearch .... -LLL -b "ou=people,dc=..." > old.ldif
		$ convertSambaAccount --sid <DOM SID> --input old.ldif --output new.ldif
		

The <DOM SID> can be obtained by running

$ net getlocalsid <DOMAINNAME>

on the Samba PDC as root.

Under Samba-2.x the domain SID can be obtained by executing:

$ smbpasswd -S <DOMAINNAME>

The old sambaAccount schema may still be used by specifying the ldapsam_compat passdb backend. However, the sambaAccount and associated attributes have been moved to the historical section of the schema file and must be uncommented before use if needed. The Samba-2.2 object class declaration for a sambaAccount has not changed in the Samba-3 samba.schema file.

Other new object classes and their uses include:

  • sambaDomain domain information used to allocate RIDs for users and groups as necessary. The attributes are added in “ldap suffix” directory entry automatically if an idmap UID/GID range has been set and the “ldapsam” passdb backend has been selected.

  • sambaGroupMapping an object representing the relationship between a posixGroup and a Windows group/SID. These entries are stored in the “ldap group suffix” and managed by the “net groupmap” command.

  • sambaUNIXIdPool created in the “ldap idmap suffix” entry automatically and contains the next available “idmap UID” and “idmap GID”.

  • sambaIdmapEntry object storing a mapping between a SID and a UNIX UID/GID. These objects are created by the idmap_ldap module as needed.

New Suffix for Searching

The following new smb.conf parameters have been added to aid in directing certain LDAP queries when passdb backend = ldapsam://... has been specified.

  • ldap suffix used to search for user and computer accounts.

  • ldap user suffix used to store user accounts.

  • ldap machine suffix used to store machine trust accounts.

  • ldap group suffix location of posixGroup/sambaGroupMapping entries.

  • ldap idmap suffix location of sambaIdmapEntry objects.

If an ldap suffix is defined, it will be appended to all of the remaining subsuffix parameters. In this case, the order of the suffix listings in smb.conf is important. Always place the ldap suffix first in the list.

Due to a limitation in Samba's smb.conf parsing, you should not surround the domain names with quotation marks.

IdMap LDAP Support

Samba-3 supports an LDAP backend for the idmap subsystem. The following options inform Samba that the idmap table should be stored on the directory server onterose in the ou=idmap,dc=quenya,dc=org partition.

[global]
...
idmap backend = ldap:ldap://onterose/
ldap idmap suffix = ou=idmap,dc=quenya,dc=org
idmap uid = 40000-50000
idmap gid = 40000-50000

This configuration allows Winbind installations on multiple servers to share a UID/GID number space, thus avoiding the interoperability problems with NFS that were present in Samba-2.2.