Item QML Type

This read-only property indicates whether the item has active focus.

If activeFocus is true, either this item is the one that currently receives keyboard input, or it is a FocusScope ancestor of the item that currently receives keyboard input.

Usually, activeFocus is gained by setting focus on an item and its enclosing FocusScope objects. In the following example, the input and focusScope objects will have active focus, while the root rectangle object will not.

  import QtQuick 2.0

  Rectangle {
      width: 100; height: 100

      FocusScope {
          id: focusScope
          focus: true

          TextInput {
              id: input
              focus: true
          }
      }
  }

See also focus and Keyboard Focus in Qt Quick.

This property holds whether the item wants to be in the tab focus chain. By default, this is set to false.

The tab focus chain traverses elements by first visiting the parent, and then its children in the order they occur in the children property. Pressing the tab key on an item in the tab focus chain will move keyboard focus to the next item in the chain. Pressing BackTab (normally Shift+Tab) will move focus to the previous item.

To set up a manual tab focus chain, see KeyNavigation. Tab key events used by Keys or KeyNavigation have precedence over focus chain behavior; ignore the events in other key handlers to allow it to propagate.

Anchors provide a way to position an item by specifying its relationship with other items.

Margins apply to top, bottom, left, right, and fill anchors. The anchors.margins property can be used to set all of the various margins at once, to the same value. It will not override a specific margin that has been previously set; to clear an explicit margin set its value to undefined. Note that margins are anchor-specific and are not applied if an item does not use anchors.

Offsets apply for horizontal center, vertical center, and baseline anchors.

  Item {
      Image {
          id: pic
          // ...
      }
      Text {
          id: label
          anchors.horizontalCenter: pic.horizontalCenter
          anchors.top: pic.bottom
          anchors.topMargin: 5
          // ...
      }
  }

  Item {
      Image {
          id: pic
          // ...
      }
      Text {
          id: label
          anchors.left: pic.right
          anchors.leftMargin: 5
          // ...
      }
  }

anchors.fill provides a convenient way for one item to have the same geometry as another item, and is equivalent to connecting all four directional anchors.

To clear an anchor value, set it to undefined.

anchors.alignWhenCentered (default true) forces centered anchors to align to a whole pixel; if the item being centered has an odd width or height, the item will be positioned on a whole pixel rather than being placed on a half-pixel. This ensures the item is painted crisply. There are cases where this is not desirable, for example when rotating the item jitters may be apparent as the center is rounded.

Note: You can only anchor an item to siblings or a parent.

For more information see Anchor Layouts.

Used by visual elements to decide if the item should use antialiasing or not. In some cases items with antialiasing require more memory and are potentially slower to render (see Antialiasing for more details).

The default is false, but may be overridden by derived elements.

Specifies the position of the item's baseline in local coordinates.

The baseline of a Text item is the imaginary line on which the text sits. Controls containing text usually set their baseline to the baseline of their text.

For non-text items, a default baseline offset of 0 is used.

The children property contains the list of visual children of this item. The resources property contains non-visual resources that you want to reference by name.

It is not generally necessary to refer to these properties when adding child items or resources, as the default data property will automatically assign child objects to the children and resources properties as appropriate. See the data documentation for details.

This property holds the collective position and size of the item's children.

This property is useful if you need to access the collective geometry of an item's children in order to correctly size the item.

This property holds whether clipping is enabled. The default clip value is false.

If clipping is enabled, an item will clip its own painting, as well as the painting of its children, to its bounding rectangle.

The data property allows you to freely mix visual children and resources in an item. If you assign a visual item to the data list it becomes a child and if you assign any other object type, it is added as a resource.

So you can write:

  Item {
      Text {}
      Rectangle {}
      Timer {}
  }

instead of:

  Item {
      children: [
          Text {},
          Rectangle {}
      ]
      resources: [
          Timer {}
      ]
  }

It should not generally be necessary to refer to the data property, as it is the default property for Item and thus all child items are automatically assigned to this property.

This property holds whether the item receives mouse and keyboard events. By default this is true.

Setting this property directly affects the enabled value of child items. When set to false, the enabled values of all child items also become false. When set to true, the enabled values of child items are returned to true, unless they have explicitly been set to false.

Setting this property to false automatically causes activeFocus to be set to false, and this item will longer receive keyboard events.

See also visible.

This property holds whether the item has focus within the enclosing FocusScope. If true, this item will gain active focus when the enclosing FocusScope gains active focus.

In the following example, input will be given active focus when scope gains active focus:

  import QtQuick 2.0

  Rectangle {
      width: 100; height: 100

      FocusScope {
          id: scope

          TextInput {
              id: input
              focus: true
          }
      }
  }

For the purposes of this property, the scene as a whole is assumed to act like a focus scope. On a practical level, that means the following QML will give active focus to input on startup.

  Rectangle {
      width: 100; height: 100

      TextInput {
            id: input
            focus: true
      }
  }

See also activeFocus and Keyboard Focus in Qt Quick.

Defines the item's position and size.

The (x,y) position is relative to the parent.

  Item { x: 100; y: 100; width: 100; height: 100 }

Defines the natural width or height of the Item if no width or height is specified.

The default implicit size for most items is 0x0, however some items have an inherent implicit size which cannot be overridden, for example, Image and Text.

Setting the implicit size is useful for defining components that have a preferred size based on their content, for example:

  // Label.qml
  import QtQuick 2.0

  Item {
      property alias icon: image.source
      property alias label: text.text
      implicitWidth: text.implicitWidth + image.implicitWidth
      implicitHeight: Math.max(text.implicitHeight, image.implicitHeight)
      Image { id: image }
      Text {
          id: text
          wrapMode: Text.Wrap
          anchors.left: image.right; anchors.right: parent.right
          anchors.verticalCenter: parent.verticalCenter
      }
  }

Note: Using implicitWidth of Text or TextEdit and setting the width explicitly incurs a performance penalty as the text must be laid out twice.

Defines the natural width or height of the Item if no width or height is specified.

The default implicit size for most items is 0x0, however some items have an inherent implicit size which cannot be overridden, for example, Image and Text.

Setting the implicit size is useful for defining components that have a preferred size based on their content, for example:

  // Label.qml
  import QtQuick 2.0

  Item {
      property alias icon: image.source
      property alias label: text.text
      implicitWidth: text.implicitWidth + image.implicitWidth
      implicitHeight: Math.max(text.implicitHeight, image.implicitHeight)
      Image { id: image }
      Text {
          id: text
          wrapMode: Text.Wrap
          anchors.left: image.right; anchors.right: parent.right
          anchors.verticalCenter: parent.verticalCenter
      }
  }

Note: Using implicitWidth of Text or TextEdit and setting the width explicitly incurs a performance penalty as the text must be laid out twice.

Holds the effect that is applied to this layer.

The effect is typically a ShaderEffect component, although any Item component can be assigned. The effect should have a source texture property with a name matching layer.samplerName.

See also layer.samplerName and Item Layers.

Holds whether the item is layered or not. Layering is disabled by default.

A layered item is rendered into an offscreen surface and cached until it is changed. Enabling layering for complex QML item hierarchies can sometimes be an optimization.

None of the other layer properties have any effect when the layer is disabled.

See also Item Layers.

This property defines the internal OpenGL format of the texture. Modifying this property makes most sense when the layer.effect is also specified. Depending on the OpenGL implementation, this property might allow you to save some texture memory.

• ShaderEffectSource.Alpha - GL_ALPHA;
• ShaderEffectSource.RGB - GL_RGB
• ShaderEffectSource.RGBA - GL_RGBA

Note: ShaderEffectSource.RGB and ShaderEffectSource.Alpha should be used with caution, as support for these formats in the underlying hardare and driver is often not present.

See also Item Layers.

If this property is true, mipmaps are generated for the texture.

Note: Some OpenGL ES 2 implementations do not support mipmapping of non-power-of-two textures.

See also Item Layers.

Holds the name of the effect's source texture property.

This value must match the name of the effect's source texture property so that the Item can pass the layer's offscreen surface to the effect correctly.

See also layer.effect, ShaderEffect, and Item Layers.

Holds whether the layer is smoothly transformed.

See also Item Layers.

This property defines the rectangular area of the item that should be rendered into the texture. The source rectangle can be larger than the item itself. If the rectangle is null, which is the default, then the whole item is rendered to the texture.

See also Item Layers.

This property defines how the generated OpenGL texture should be mirrored. The default value is ShaderEffectSource.MirrorVertically. Custom mirroring can be useful if the generated texture is directly accessed by custom shaders, such as those specified by ShaderEffect. If no effect is specified for the layered item, mirroring has no effect on the UI representation of the item.

• ShaderEffectSource.NoMirroring - No mirroring
• ShaderEffectSource.MirrorHorizontally - The generated texture is flipped along X-axis.
• ShaderEffectSource.MirrorVertically - The generated texture is flipped along Y-axis.

This QML property was introduced in Qt 5.6.

This property holds the requested pixel size of the layers texture. If it is empty, which is the default, the size of the item is used.

Note: Some platforms have a limit on how small framebuffer objects can be, which means the actual texture size might be larger than the requested size.

See also Item Layers.

This property defines the OpenGL wrap modes associated with the texture. Modifying this property makes most sense when the layer.effect is specified.

• ShaderEffectSource.ClampToEdge - GL_CLAMP_TO_EDGE both horizontally and vertically
• ShaderEffectSource.RepeatHorizontally - GL_REPEAT horizontally, GL_CLAMP_TO_EDGE vertically
• ShaderEffectSource.RepeatVertically - GL_CLAMP_TO_EDGE horizontally, GL_REPEAT vertically
• ShaderEffectSource.Repeat - GL_REPEAT both horizontally and vertically

Note: Some OpenGL ES 2 implementations do not support the GL_REPEAT wrap mode with non-power-of-two textures.

See also Item Layers.

This property holds the opacity of the item. Opacity is specified as a number between 0.0 (fully transparent) and 1.0 (fully opaque). The default value is 1.0.

When this property is set, the specified opacity is also applied individually to child items. This may have an unintended effect in some circumstances. For example in the second set of rectangles below, the red rectangle has specified an opacity of 0.5, which affects the opacity of its blue child rectangle even though the child has not specified an opacity.

  Item {
      Rectangle {
          color: "red"
          width: 100; height: 100
          Rectangle {
              color: "blue"
              x: 50; y: 50; width: 100; height: 100
          }
      }
  }

  Item {
      Rectangle {
          opacity: 0.5
          color: "red"
          width: 100; height: 100
          Rectangle {
              color: "blue"
              x: 50; y: 50; width: 100; height: 100
          }
      }
  }

Changing an item's opacity does not affect whether the item receives user input events. (In contrast, setting visible property to false stops mouse events, and setting the enabled property to false stops mouse and keyboard events, and also removes active focus from the item.)

See also visible.

This property holds the visual parent of the item.

Note: The concept of the visual parent differs from that of the QObject parent. An item's visual parent may not necessarily be the same as its object parent. See Concepts - Visual Parent in Qt Quick for more details.

The children property contains the list of visual children of this item. The resources property contains non-visual resources that you want to reference by name.

It is not generally necessary to refer to these properties when adding child items or resources, as the default data property will automatically assign child objects to the children and resources properties as appropriate. See the data documentation for details.

This property holds the rotation of the item in degrees clockwise around its transformOrigin.

The default value is 0 degrees (that is, no rotation).

  Rectangle {
      color: "blue"
      width: 100; height: 100
      Rectangle {
          color: "red"
          x: 25; y: 25; width: 50; height: 50
          rotation: 30
      }
  }

See also Transform and Rotation.

This property holds the scale factor for this item.

A scale of less than 1.0 causes the item to be rendered at a smaller size, and a scale greater than 1.0 renders the item at a larger size. A negative scale causes the item to be mirrored when rendered.

The default value is 1.0.

Scaling is applied from the transformOrigin.

  import QtQuick 2.0

  Rectangle {
      color: "blue"
      width: 100; height: 100

      Rectangle {
          color: "green"
          width: 25; height: 25
      }

      Rectangle {
          color: "red"
          x: 25; y: 25; width: 50; height: 50
          scale: 1.4
      }
  }

See also Transform and Scale.

Primarily used in image based items to decide if the item should use smooth sampling or not. Smooth sampling is performed using linear interpolation, while non-smooth is performed using nearest neighbor.

In Qt Quick 2.0, this property has minimal impact on performance.

By default, this property is set to true.

This property holds the name of the current state of the item.

If the item is in its default state, that is, no explicit state has been set, then this property holds an empty string. Likewise, you can return an item to its default state by setting this property to an empty string.

See also Qt Quick States.

This property holds the list of possible states for this item. To change the state of this item, set the state property to one of these states, or set the state property to an empty string to revert the item to its default state.

This property is specified as a list of State objects. For example, below is an item with "red_color" and "blue_color" states:

  import QtQuick 2.0

  Rectangle {
      id: root
      width: 100; height: 100

      states: [
          State {
              name: "red_color"
              PropertyChanges { target: root; color: "red" }
          },
          State {
              name: "blue_color"
              PropertyChanges { target: root; color: "blue" }
          }
      ]
  }

See Qt Quick States and Animation and Transitions in Qt Quick for more details on using states and transitions.

See also transitions.

This property holds the list of transformations to apply.

For more information see Transform.

This property holds the origin point around which scale and rotation transform.

Nine transform origins are available, as shown in the image below. The default transform origin is Item.Center.

This example rotates an image around its bottom-right corner.

  Image {
      source: "myimage.png"
      transformOrigin: Item.BottomRight
      rotation: 45
  }

To set an arbitrary transform origin point use the Scale or Rotation transform types with transform.

This property holds the list of transitions for this item. These define the transitions to be applied to the item whenever it changes its state.

This property is specified as a list of Transition objects. For example:

  import QtQuick 2.0

  Item {
      transitions: [
          Transition {
              //...
          },
          Transition {
              //...
          }
      ]
  }

See Qt Quick States and Animation and Transitions in Qt Quick for more details on using states and transitions.

See also states.

This property holds whether the item is visible. By default this is true.

Setting this property directly affects the visible value of child items. When set to false, the visible values of all child items also become false. When set to true, the visible values of child items are returned to true, unless they have explicitly been set to false.

(Because of this flow-on behavior, using the visible property may not have the intended effect if a property binding should only respond to explicit property changes. In such cases it may be better to use the opacity property instead.)

If this property is set to false, the item will no longer receive mouse events, but will continue to receive key events and will retain the keyboard focus if it has been set. (In contrast, setting the enabled property to false stops both mouse and keyboard events, and also removes focus from the item.)

Note: This property's value is only affected by changes to this property or the parent's visible property. It does not change, for example, if this item moves off-screen, or if the opacity changes to 0.

See also opacity and enabled.

This read-only property lists all of the item's children that are currently visible. Note that a child's visibility may have changed explicitly, or because the visibility of this (it's parent) item or another grandparent changed.

Defines the item's position and size.

The (x,y) position is relative to the parent.

  Item { x: 100; y: 100; width: 100; height: 100 }

Defines the item's position and size.

The (x,y) position is relative to the parent.

  Item { x: 100; y: 100; width: 100; height: 100 }

Defines the item's position and size.

The (x,y) position is relative to the parent.

  Item { x: 100; y: 100; width: 100; height: 100 }

Sets the stacking order of sibling items. By default the stacking order is 0.

Items with a higher stacking value are drawn on top of siblings with a lower stacking order. Items with the same stacking value are drawn bottom up in the order they appear. Items with a negative stacking value are drawn under their parent's content.

The following example shows the various effects of stacking order.

  Item {
      Rectangle {
          color: "red"
          width: 100; height: 100
      }
      Rectangle {
          color: "blue"
          x: 50; y: 50; width: 100; height: 100
      }
  }

  Item {
      Rectangle {
          z: 1
          color: "red"
          width: 100; height: 100
      }
      Rectangle {
          color: "blue"
          x: 50; y: 50; width: 100; height: 100
      }
  }

  Item {
      Rectangle {
          color: "red"
          width: 100; height: 100
          Rectangle {
              color: "blue"
              x: 50; y: 50; width: 100; height: 100
          }
      }
  }

  Item {
      Rectangle {
          color: "red"
          width: 100; height: 100
          Rectangle {
              z: -1
              color: "blue"
              x: 50; y: 50; width: 100; height: 100
          }
      }
  }

Returns the first visible child item found at point (x, y) within the coordinate system of this item.

Returns null if there is no such item.

Returns true if this item contains point, which is in local coordinates; returns false otherwise.

This is an overloaded function.

Forces active focus on the item with the given reason.

This method sets focus on the item and ensures that all ancestor FocusScope objects in the object hierarchy are also given focus.

This QML method was introduced in Qt 5.1.

See also activeFocus and Qt::FocusReason.

Forces active focus on the item.

This method sets focus on the item and ensures that all ancestor FocusScope objects in the object hierarchy are also given focus.

The reason for the focus change will be Qt::OtherFocusReason. Use the overloaded method to specify the focus reason to enable better handling of the focus change.

See also activeFocus.

Grabs the item into an in-memory image.

The grab happens asynchronously and the JavaScript function callback is invoked when the grab is completed. The callback takes one argument, which is the result of the grab operation; an ItemGrabResult object.

Use targetSize to specify the size of the target image. By default, the result will have the same size as the item.

If the grab could not be initiated, the function returns false.

The following snippet shows how to grab an item and store the results to a file.

  Rectangle {
      id: source
      width: 100
      height: 100
      gradient: Gradient {
          GradientStop { position: 0; color: "steelblue" }
          GradientStop { position: 1; color: "black" }
      }
  }
      // ...
      source.grabToImage(function(result) {
                             result.saveToFile("something.png");
                         });

The following snippet shows how to grab an item and use the results in another image element.

  Image {
      id: image
  }
      // ...
      source.grabToImage(function(result) {
                             image.source = result.url;
                         },
                         Qt.size(50, 50));

Note: This function will render the item to an offscreen surface and copy that surface from the GPU's memory into the CPU's memory, which can be quite costly. For "live" preview, use layers or ShaderEffectSource.

Maps the point (x, y) or rect (x, y, width, height), which is in item's coordinate system, to this item's coordinate system, and returns a point or rect matching the mapped coordinate.

If item is a null value, this maps the point or rect from the coordinate system of the root QML view.

Maps the point (x, y) or rect (x, y, width, height), which is in item's coordinate system, to this item's coordinate system, and returns a point or rect matching the mapped coordinate.

If item is a null value, this maps the point or rect from the coordinate system of the root QML view.

Maps the point (x, y) or rect (x, y, width, height), which is in this item's coordinate system, to item's coordinate system, and returns a point or rect matching the mapped coordinate.

If item is a null value, this maps the point or rect to the coordinate system of the root QML view.

Maps the point (x, y) or rect (x, y, width, height), which is in this item's coordinate system, to item's coordinate system, and returns a point or rect matching the mapped coordinate.

If item is a null value, this maps the point or rect to the coordinate system of the root QML view.

Returns the item in the focus chain which is next to this item. If forward is true, or not supplied, it is the next item in the forwards direction. If forward is false, it is the next item in the backwards direction.

This QML method was introduced in Qt 5.1.